Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹47.8 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹51.7 L+₹1.7 L (3.50%)Rejected-Finance | L2 | Rejected-Finance Unsuccessful bidder | |
| 3 | L3₹54.6 L+₹4.7 L (9.37%)Rejected-Finance | L3 | Rejected-Finance Unsuccessful bidder | |
| 4 | L4₹55.8 L+₹5.9 L (11.8%)Rejected-Finance | L4 | Rejected-Finance Unsuccessful bidder | |
| 5 | L5₹57.0 L+₹7.1 L (14.2%)Rejected-Finance | L5 | Rejected-Finance Unsuccessful bidder |
Tender Value
₹57.3 L
EMD Value
₹1.1 L
Closing Date
30 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Tezpur
HQ CWE TEZPUR PO DEKARGAON DIST SONITPUR PIN 784501 (ASSAM)
SPL REPAIR TO PERIMETER SECURITY WALL AT ADM AREA AT CERTAIN UNIT UNDER GE(S) TEZPUR
2022_MES_570841_1
CWE/TEZ(S)/T-43 of 22-23
Open Tender
Civil Works
Item Rate
180 days
GE(S) Tezpur
Please refer Tender documents.
8 documents required · 8 mandatory
₹1,000
GE(S) Tezpur
₹1.1 L
Yes
10 Feb 2023
23 Dec 2022
31 Jan 2023
23 Dec 2022
30 Jan 2023
13 Jan 2023
Amount
Demolition of reinforced cement concrete, (other than ground floors), shelves, chajjas, slabs and similar work carefully and matching to adjoining disturbed surfaces all as directed.
M & L RCC M-25 design mix as in foundation including footings foundation beams, plinth bases for columns etc all as specified and directed.
M & L RCC M-25 design mix as in columns etc all as specified and directed.
M & L RCC M-25 design mix as in beams etc all as specified and directed
M&L RCC M-25 Design Mix, using 20 mm graded aggregate as in slab( vertical) , shelves etc.all as specified and directed.
Use and waste of form work to faces of walls retaining walls,abutments, parapets and similar work including attached pillasters,buttresses etc, vertical or to batter complete all as specified and directed.
Use and waste of form work to sides of concrete foundation,footing , base of column roungh finshed surface of concrete complete all as specified and directed.
Use and waste of form work to sides of column, rough finished flat surface area complete all as specified and directed.
Use and waste of form work to sides and soffits of floor or roof beams, beam haunchings, girders , bressummers , lintels , cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc complete all as specified and directed.
M&L for TMT steel bars 10mm dia & over in reinforcement, cut to length, bend to shape required, including craking bending spirally for hooking ends and binding with including mild steel wieres(annealed) not less than 0.9mm dia or securing with slips complete all as specified and directed.
All as per item No 10 above but 8 mm dia and over upto and including 10mm dia in strirups spacers and binders complete all as specified and directed.
S&F galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia bars and 75mm spacing and straining and fixing to any type of standard rails straining bold, inc securing or typing at crossing with galvanised mild steel wire staples or steel pins (each line wire to be measured) complete all as specified and directed.
M&L for Dismantling of wrought iron or mild steel work of any description lile purlin, post etc not othewise provided for complete all as specified and directed.
S & F roof trusses framed ,trussed (beam, tee , angle , channel ,tups, pipes etc ) including distance pieces , cleat FE -410 W (Gde E 250 quality A) complete all as specified and directed.
M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles , as necessary , gusset plates , riveting etc n. exc 10 kg each brackts , confirming to 290 Gde E-165 (Brackets over 10 Kg each to be measured under ' structural Steel ' complete all as specified and directed.
S & F stairs (framed) including stringers , treaders , landing , balusters, hand raiils etc including cleats , brackets etc confirming to Fe 410 W (Gde -E-250 quality A) complete all as directed.
M&L for Plates (plain or chequrred ) channels , square cut or notched (ordinary and counter sunk ) forming holes, with riveted , bolted or welded attachment confirming to Fe -410 W (Gde -E-250 quality A) complete all as directed.
M &L Two coat of synthetic enamel paint to steel surface over a coat of Zinchromate primer n exc 10 cm width or girth incl preparation of new surfaces complete all as specified and directed.
M&L for Excavation in trenches in soft/loose soil, depth n.exc 1.50 m and gettingout in soft/loose soil complete all as specified and directed.
M&L PCC 1:4:8 Type D-2 using 40mm size graded stone aggregate as in fdn filling mass concrete complete all as specified and directed.
M & L for Hard core of broken stone or boulders 150 mm thick spread thickness of guage n exc 63 mm deposited spread and levelled in n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.
M&L for Dismantling plain or corrugated steel sheeting , any guage , thickness , in roof covering complete all as specified and directed.
S & F pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall , fixed with self tapping screws as specified.
All as per item No 23 above but in ridges using plain Galvalume sheet complete all as specified and directed
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for 75 mm thick PCC 1:3:6 Type C-2 using 40mm size graded stone aggregate as in bedding of footpath complete all as specified and directed.
M & L for 15 mm thick screed bed in CM 1:6 for laying of floor finish complete all as specified and directed.
S &F chequered cement concrete coloured tiles (glossy finish) 30cm x 30cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.
Demolition of brick work built in cement mortar including all quions, arches pillars etc. all as specified and directed.
M&L brick work using sub class ‘B’ bricks (old size) straight or curved in plan to any radius in half brick work built in CM 1:4 complete all as specified.
M&L brick work using sub class ‘B’ bricks (old size) straight or curved in plan exc 6 mtr mean radius in CM (1:6) complete all as specified.
Removing excavated materials n.exc 50 mtrs and depositing where directed at a level n exc 1.50mtrs the starting point complete.
Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc.
Excavating in Trenches, exc. 1.50 Metre but not exc. 3.00 Metre in depth, for Foundation of Pole/Stays, etc. and getting out in Soft/ Loose Soil, complete all as specified and directed by Engineer in Charge
M&L for sand cushioning with clean dry sand for protection of under ground cable complete all as specified and as directed. Note :- Punned thickness of sand layer shall be measured and paid to contractor.
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
S&F in replacement of light grade galvanised pipe of bore 40 mm fixed to wall/ceiling with suitable nuts and bolt or fixed to pole with suitable bracket, nuts and bolts or laid in trenches after drawn through electric cable complete all as specified and directed.
Supply,laying in repair in trenches of XLPE UG cable insulated aluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 16 sqmm 4 core and testing complete all as specified and directed.
Supply, fixing, errecting in trully vertically position steel tubular swaged welded pole complete with cast iron base plate, finial taper plug, bolts, nuts, and screws as specified type 410 SP - 31 (9 mtr long) including one primer coat, one under coat, one finishing coat of aluminium paint, marking of pole numbers and making 3 Nos of black colour strip and 03 nos yellow colour strip in alternate layer 15 cm wide on equal distance from coping including suitable size of PVC cable jointing box with nut bolts and MS clamps made out with 20 x 5 flat iron complete all as specified and as directed.
M&L for cement contrete 1:3:6 type C- 2 40 mm graded stone aggregate as in foundation of pole filling and mass concrete in complete all as specified and as directed.
M&l for cement contrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof, kerb or mud stops rounded or charged on edges ,coping etc complete all as specified and as directed.
S & F cable of size 1.5sqmm 3 core PVC insulated and FRLS PVC round shethed,copper conductor (flexible) 1100volts , conforming to IS 694 for connecting security light from junction box and nacked overhead conductor to security light end terminal as directed.
Supply and fixing LED street lights not less than 60W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions. Cat Log No ENDURAOMNIPLUS SL 60WLED757 SASY TOPC of Havells/Equivalent in Philips/Crompton/Surya.
M & L for making swan neck end size of not exc. 32mm GI pipe length not less than 1.2 mtr for mounting street light at top of existing LT pole including Clamp, cutting, welding, reaming, finishing ,bending in appropriate size at existing location as directed .
Supply and fix loop in loop out junction box (Suitable for 10-16 Sqmm) with SP 6-32 amp, IP 65 / IP 66 protection halogen free and weather proof of size (155x210x92) mm, fixed to Pole with suitable clamp including nuts and bolts and washers incl provision of connector fixed to pole all as directed.
Material & Labour for earthing with galvanised steel earth plate electrode of size 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25m deep below the ground level) with top edge of the plate not less than 1.5m below normal ground level,connected to the galvanised earth lead by means of bolts, nuts check nuts and washers of galvanised iron or steel using GI or steel wire 4 mm dia as earthing lead as shown in electrical plate No. 3 of SSR Part-I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/loose soil, returning filling, disposal of surplus soil, earth pit in PCC 1:3:6 type C-1 using 20mm graded stone aggregate pit, funnel, 20mm dia GI medium grade watering pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs etc mesh, charcoal and common salt in alternatee layer of 15 cm complete all as specified and directed by Engr-in-Charge.
M&L for cement concrete (1:4:8) type D-2 (using 40mm graded crushed stone aggregate) as in foundation of pole filing and mass concrete complete all as specified and directed
NOTES :- 1. For the items for which specifications not mentioned any where in the tender, the IRC specifications shall be followed. 2. Unless otherwise specified the rates for PCC shall deemed to include the cost of formwork shuttering etc., required for complete and proper execution of the work. Refer Schedule "A" notes for details.
sanjay upadhya
NARAENDRA & COMPANY
KIRTEE KAMAL TAMULI
MAKBUL HUSSAIN LLP
Shiva Builders
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .