Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L2₹3.2 L+₹15,631.05 (4.90%)Accepted-AOC | L2 | Accepted-AOC L1 | |
| 2 | L1₹3.2 LRejected-Finance | L1 | Rejected-Finance L1 |
| Sl No | Description | Qty | Unit | PRADEEP SR L1 | SREERAG S S L2 |
|---|---|---|---|---|---|
| 1.00welness centre | |||||
| 1.00 | 21.2.2:Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS : 12823 Grade I Type II, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of Engineer - in- Charge.Pre- laminated particle board with decorative lamination on both sides | 51.33 | sqm | 1,001.04 ₹51,383.38 Lowest | 1,072 ₹55,025.76 |
| 1.00 | 21.3.2:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 5.50 mm thickness (weight not less than 12.50 kg/sqm) | 6.54 | sqm | 1,485.26 ₹9,719.54 Lowest | 1,495 ₹9,783.28 |
| 1.00 | 21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm) | 43.14 | sqm | 1,084.46 ₹46,783.6 Lowest | 1,150 ₹49,611 |
| 1.00 | 21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):
For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron) | 114.7 | kg | 500 ₹57,350 Lowest | 525 ₹60,217.5 |
| 1.00 | 18.51.1:Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore | 4 | each | 757.54 ₹3,030.16 Lowest | 799 ₹3,196 |
| 1.01 | 50.17.1.3:Supplying and fixing CP Towel rod 60cm or nearest available length including cost of materials and labour charges etc complete as per the direction of site Engineer-in-charge. | 4 | no | 139.6 ₹558.4 | 113.5 ₹454 Lowest |
| 1.01 | 50.17.1.4:Supplying and fixing CP Health faucet good quality including cost of materials and labour charges etc. complete as per the direction of site engineer-in-charge. | 4 | no | 834.2 ₹3,336.8 | 667 ₹2,668 Lowest |
| 1.01 | 50.18.7.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer- in- Charge 25 mm dia 12 Kgf/cm2 - Internal work - Exposed on wall | 25 | metre | 250.26 ₹6,256.5 Lowest | 280 ₹7,000 |
| 1.01 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 3.74 | cum | 6,923.86 ₹25,867.54 | 6,060 ₹22,640.16 Lowest |
Tender Value
₹3.8 L
EMD Value
₹9,518
Closing Date
12 Nov 2025, 5:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Executive Engineer
Executive Engineer North Thiruvananthapuram Corporation 695033
Project No - S 1879/26 - IMPLEMENTING HEALTH WELLNESS CENTRE - SCHEME - 6 -HELTH AND WELLNESS CENTRE MAINTENANCE IN VALIYAVILA WARD
2025_LSGD_819785_1
EE(N)/PLANFUND TENDER/ 2025-26(34)
Open Tender
Civil Works - Buildings
Item Rate
90 days
VALIYAVILA WARD
Please refer Tender documents.
9 documents required · 9 mandatory
₹840
Yes
₹9,518
Yes
29 Jan 2026
6 Nov 2025
14 Nov 2025
6 Nov 2025
12 Nov 2025
6 Nov 2025
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1374338.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.48 MB
prelimagmt.pdf
Tender Documents • 0.39 MB
formoftender.pdf
Tender Documents • 0.38 MB
Affi.pdf
Tender Documents • 0.37 MB
viewsbd.pdf
Tender Documents • 1.69 MB
E_PAY.pdf
Tender Documents • 0.23 MB
BOQ_1374338.xls
BOQ • 0.31 MB
INTEGRITYPACT.pdf
Tender Documents • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .