Construction of Gazebo & Fixing Concertina Coil Fencing on Existing Boundary Wall at Eru PHQ - NRB Campus-Navsari, Dist- Navsari (Including Electrification) (DGP Priority NRB- 202-23) (First Attempt)

No. In Figure In Words

1 Providing & Fixing 600mm dia. loop hot dip galvenised iron 1026.00 RMT 715.14 Rupees Seven Hundred Fifteen And

concertina coil made out of 2.5mm dia wire 22mm long razor Paise Fourteen Only

sharp barbs at 35mm center fitted on 50mm x 50mm x 5mm

M.S. Angle post of required shape & size at 2.50 mt. center

distance. concertina coil shall be fixed on M.S. Angle stand

with the help of 5 Nos. Barbed wire M.S. Angle and 8mm MS

Base Plate with Anchor Fastner10mm dia & 150mm long

shall be fixed on top of Compound wall Rate is including of

applying one coat of primer and two coats oil painting on M.S.

Angle & Plate stand shall be made as per the drawing

supplied or as directed by engineer in charge.

2 Provinding and fixing M.S. GRILL/GATE fabricated from MS 6840.00 KG 74.99 Rupees Seventy Four And Paise

Flat, Square bars , Round bars, plates as per details including Ninety Nine Only

welding and two coats of oil paints on a primer coat of

approved shade and quality etc. complete.

3 Boring holes 3.5 m deep in ordinary soil (for cast in situ piles) 4.00 NO. 1322.40 Rupees One Thousand Three

and getting out the soil and disposal of the surplus excavated Hundred Twenty Two And Paise Forty

soil as directed within a lead of 50 Meter for following Only

diameter of pipes.(ii) 250 mm

4 Providing and laying controlled cement concrete M - 250 and 10.00 CUM 4627.56 Rupees Four Thousand Six Hundred

finishing smooth with curing etc complete including cost of Twenty Seven And Paise Fifty Six

form work of Plywood only with fair finish & Proping must be Only

of steel only so as to give a fair finish but excluding cost of

reinforcement for any Floor for R.C.C. work in COLUMN

FOOTING. Rate are inclusive of Providing and mixing

Plasticizer of approved make in propertion as per mix Design.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

5 Proveding and laying ordinary cement concrete 1:4:8 (1 15.00 CUM 2720.01 Rupees Two Thousand Seven

cement : 4 coarse sand : 8 graded machine broken stone Hundred Twenty And Paise One Only

aggregate 40mm nominal size ) and curing complete

including Cost of form work ifrequired in FOUNDATION AND

6 Providing and laying controlled cement concrete M - 250 and 4.00 CUM 7172.07 Rupees Seven Thousand One

finishing smooth with curing etc complete including cost of Hundred Seventy Two And Paise

form work of Plywood only with fair finish & Proping must be Seven Only

of steel only so as to give a fair finish but excluding cost of

reinforcement for any Floor for R.C.C. work in Plinth Beams.

Rate are inclusive of Providing and mixing Plasticizer of

approved make in propertion as per mix Design.

layers of 20cms. thickness including watering, ramming, And Paise Thirty Six Only

consolidating and dressing etc.complete

8 Filling plinth with SAND under floors including watering, 3.00 CUM 467.02 Rupees Four Hundred Sixty Seven

raming consolidating and dressing etc. complete And Paise Two Only

9 Brick work using common burnt clay building bricks having 5.00 CUM 4080.74 Rupees Four Thousand Eighty And

crushing strength not less than 35 Kg/Sq.cm.in foundation Paise Seventy Four Only

and plinth in cement mortar 1:6 (1-cement;6- coarse sand),

Conventional bricks.Bricks with frog only shall be used.

10 Providing and laying controlled cement concrete M - 150 and 3.00 CUM 4010.82 Rupees Four Thousand Ten And

finishing smooth with curing etc complete including cost of Paise Eighty Two Only

form work of Plywood only with fair finish & Proping must be

of steel only so as to give a fair finish but excluding cost of

reinforcement.for R.C.C. work for FOUNDATION & PLINTH.

Providing and mixing Plasticizer in Cement Concrete as per

mix Design including rate of labour material etc. as per

direction of Engineer in Charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

11 Providing and laying Controlled cement concrete M-250 2.00 CUM 8290.18 Rupees Eight Thousand Two

including finishing smooth for R.C.C. STAIRCASE including Hundred Ninety And Paise Eighteen

the cost of form work of Plywood only with fair finish & Only

Proping must be of steel only so as to give a fair finish but

excluding cost of reinforcement for ALL FLOORS. Rate are

inclusive of Providing and mixing Plasticizer of approved

make in propertion as per mix Design.

12 Providing and laying Steel reinforcement TMT(Grade Fe-500 / 560.00 KG 76.52 Rupees Seventy Six And Paise Fifty

500D) for RCC work including cutting,bending,binding and Two Only

placing in position etc.complete for all floor. Steel Brand shall

be as per Aprroved Make List of GSPHCL.

13 Providing 20mm thick cement plaster in single coat plastering 49.00 SQMT 494.48 Rupees Four Hundred Ninety Four

upto floor two level Outside and finished even and smooth in And Paise Forty Eight Only

(i) Cement mortar 1:3 (1-cement : 3-sand) as Base Coat and

providing 2-3 mm thick synthetic texture plaster of approved

texture (Material Shall be Used as Approved By GSPHCL

Only ) including cost of all materials, labour, conveyance,

loading and unloading, taxes, royalties, scaffolding, watering

etc.complete for any Height as per Drawing and instructions

of Engineer -in -Charge.

14 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 25.00 SQMT 1304.90 Rupees One Thousand Three

mm thick tile flooring over 20 mm (average) base of cement Hundred Four And Paise Ninety Only

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface orfixing

on Existing flooring by adhesive including dismentaling of

existing flooring and material jointed with color cement slurry

including finised with flush pointing & cleaning the surface

etc.Completed Brand of the tiles shall be as per approved

make list of GSPHCL. Shade & Size of tiles shall be as

specified in tender item OR as per instructions of Engineer -

in -Charge.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

15 Providing & Laying 24" x 24" in Skirting, riser of steps and 2.00 SQMT 1420.50 Rupees One Thousand Four Hundred

dado Double Charge vitrified 8 to 10 mm thick tile over 10 mm Twenty And Paise Fifty Only

thick cement plaster of cement mortar 1:3 (1 cement:3 coarse

sand) jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete Brand of

the tiles shall be as per approved make list of GSPHCL.

Shade & Size of tiles shall be as specified in tender item OR

as per instructions of Engineer -in -Charge.

16 Providing & Fixing Granite stone slab 15mm to 18mm thick in 10.00 SQMT 2428.00 Rupees Two Thousand Four Hundred

sill, dado and jambs laid on 10 mm thick cement mortar 1:3 (1 Twenty Eight Only

cement: 3 coarse sand) and jointed with high polymer

modified quick set adhesive (water based) including moulding

rubbing and polishing etc. complete. Telephonic black granite

as specified in tender item. Rate are including fully rounding

the exposed edges.

17 Moulding of Granite/Kota Stone Stairs trade complete as per 32.00 RMT 129.95 Rupees One Hundred Twenty Nine

direction of Engineer-in-charge. And Paise Ninety Five Only

18 PRO. 3 NOS GROOVE IN TOTAL LENGTH OF STAIRCASE 12.00 RMT 82.80 Rupees Eighty Two And Paise Eighty

TREAD OF SIZE 10MM*10MM FINISHED SMOOTH IN Only

PARALLEL LINE , EQUALLY SPACED AS PER DIRECTION

OF ENGINEER IN-CHARGE IN ALL TYPE OF

FLOORING,etc

19 Providing and Fixing Precast Rubber Dye Inter locking 113.00 SQMT 697.10 Rupees Six Hundred Ninety Seven

Concrete Block 60mm thick with grade of concrete M-300 And Paise Ten Only

pnumatic compressed/vibrated by mechanically and as per

Approved design confirmiong to IS 15658 2006 including

mm Sand layer for leveling and filling the joints with sand in

proper line and level as per guidelines of IRC SP 63-2018 etc

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

20 Providing and fixing pre-cast concrete Kerb stone of gray 180.00 RMT 367.01 Rupees Three Hundred Sixty Seven

cement based concrete block 30cm length, 30cm height and And Paise One Only

15cm thick of M250 grade concerete as per approved design

and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3(1cement : 3 fine sand) etc

21 Provinding & laying lawn for land Scaping including watering 364.00 SQMT 150.00 Rupees One Hundred Fifty Only

& all labours.

22 Providing and laying PLANTATION including providing and 96.00 NO. 600.00 Rupees Six Hundred Only

fixing tree guard. Rate are also inclusive of maintaining the

tree plant in live condition at the time of completion of work at

the execution of the building i.e. intial starting time (The tree

shall be planted.)

23 Providing and Fixing Tiles Roofing with Manglor tiles (Mini 45.00 SQMT 1382.91 Rupees One Thousand Three

taylor Roofing Tiles) of 0.250m x 0.200m over 100mm thick Hundred Eighty Two And Paise Ninety

mortar 1:3 (1-Cement & 3-Coarse Sand) as instructed by One Only

Engineer in Charge.

24 Providing, Fabricating, Erecting and Fixing of Cast Iron 704.00 KG 163.30 Rupees One Hundred Sixty Three

Railing of approved pattern fabrication from cast iron flate, And Paise Thirty Only

angles, tees, square bars, round bars, boax as per drawing.

Rate is including welding,One coat of yellow zinc primer &

Two coat of oil paint of approved Make List of GSPHCL Only.

25 Providing and fixing 150mm wide 450mm over all semicircular 2.00 SQMT 569.60 Rupees Five Hundred Sixty Nine And

plain G.I.sheet class-3 gutter with Iron brackets 40mm x 3mm Paise Sixty Only

size Bolts, Nuts, washers etc.including making necessary

connection with rain water pipes. (i) 0.80 mm thick Sheet.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

26 Providing & Fixing to Wall Ceilling and Floor SWR Rain Water 21.00 RMT 309.10 Rupees Three Hundred Nine And

Pipe as Per IS-13592 of 90mm Dia. Complete with Special Paise Ten Only

Flings, Compressor type Fittings like G.I. Slotted Z patti of

Gauge (minimum1.60mm thick) and minimum 6mm dia. U

Clamp with Washer Nut at every 1.50mt. vertical distance

including All Labour Charges etc. complete including making

good the Ceilings, Floors and on terrace. Rain water pipe

shall be 90 mm Dia. SWR horizontal pipe and vertical pipe

and 90mm bend at the end near by Ground level. Rate are

Inclusive of all Necessary Fittings required for ALL FLOORS.

material should be taken from GSPHCL Approved Make List

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

(Electrical Item)

27A Providing & Erecting Point wiring with 1.1 KV grade ISI 10.00 Point 534.00 Rupees Five Hundred Thirty Four

marked 2 X 1.5 sq. mm copper PVC insulted FRLS wire with Only

1.5 sq. mm (green) copper PVC insulated FRLS wire for earth

continuity in FIA approved ISI mark medium class white

colour 20/25 mm dia. embossed rigid PVC pipe with PVC

fitting fixed with adhesive solution erected on Brick Wall along

th continuous G.I. fish wire to draw wires and finishing the

surface to match the wall / ceiling complete with approved

make 5/6 Amp. ISI make modular type switch and

accessories mounted in 20 G. G.I. company fabricated

metallic box covered with appropriate front plate modules

erected flushed with wall / ceiling with necessary modular

lamp holder / modular ceiling rose / HD Connector as

directed for Flushed wiring Light point. Cat.-III..Length of

point wiring must not increase than 10 mtr. For that necessary

switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per

tender item) [Wire must be having box packing (a) with

medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Necessary sheet must be erected on all box to prevent mortar

going into the box.& for ceiling light Point & Junction box use

deep Junction box of same PVC Pipe make . Length of point

wiring must not increase than 10 mtr. For that necessary

switch boards and their locations must be finalised before

execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has

to erect one higher size metal box and modular plate as per

instruction of EIC. Cost of blank plate shall be paid as per

tender item) [Wire must be having box packing][This item

include cleaning(inside/outside) of all GI switch

boards,electric point box,fan box,MCBDB & box cutting

plaster finishing for modular plate without any gap]

27B For Fan Point.(with 6A Modular type switch and Two Module 1.00 Point 758.00 Rupees Seven Hundred Fifty Eight

hum free 5/6 step EME step type Electronic fan regulator Only

both having ISI Make Cat-III

27C For separate Point (with 6 Amp. Switch & 3/5 pin socket both 5.00 Point 565.00 Rupees Five Hundred Sixty Five Only

having ISI mark) Cat. III

27D For Looped on switch board (with 6 Amp. Switch & 3/5 pin 2.00 Point 306.00 Rupees Three Hundred Six Only

socket both having ISI mark) Cat. III

28A Providing and erecting Medium Class FIA approved and ISI 51.00 Mtr. 24.00 Rupees Twenty Four Only

mark white colour (embossed) RIGID PVC PIPES of following

size complete erected with necessary PVC fittings & Junction

boxes fixed with adhesive solution & clamps on / in wall /

ceiling along with continuous fish wire to draw mains with

necessary fittings and junction boxes for following dia. For

28B For 25 mm. dia. 25.00 Mtr. 33.00 Rupees Thirty Three Only

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

29 Providing & Erecting Mains with FRLS PVC Insulated wire ISI 50.00 Mtr. 78.00 Rupees Seventy Eight Only

marked 1.1 KV grade In Existing FIA approved ISI mark

medium class 20/25 mm dia. embossed rigid PVC pipe with

PVC fitting fixed with adhesive solution to be erected on/in

brick wall / slab along with continuous G. I. fish wire to draw

mains laid in approved manner with plastering by cement

mortar & finishing the surface to match the wall / ceiling

complete with FRLS PVC insulated wire for earth continuity.

(Approved ISI make only) [a] 2 x 1.5 sq.mm. FRLS copper

multi stranded conductor mains with 1.5 sq.mm. FRLS

copper multi stranded conductor for earthing as per standard

colour code.(In Existing 20/25mm Pipe) [Wire must be having

box packing] (Conductor resistance should be as per

30 Supplying and Erecting LED indoor fitting of 4.00 Each 370.00 Rupees Three Hundred Seventy Only

approximately 4feet long with LED of wattage 0.2W to

0.5W assemble on single MCPCB with housing use as

a heat sink shall be made from Aluminum extrusion

having enough strength (sample must be approved by

EIC) with polycarbonate diffuser with following specification:

(A) Company mark/name on the fitting.

(B) Rated input voltage and frequency: 220V to 240 VAC ;

50Hz. (C) Rated input wattage: max. 24w

(D) Rated input current : 0.2 Amp (E) Power Factor : Min.

0.90 (F) ATHD : Max. 15% (G) Rated Luminous flux: Min.

2420 lm (H) CCT: 6500K (I) CRI: Min. 80Ra

(J) Driver Efficiency: Min. 80% (K) LED life span: Min.

Hrs @ L70 (L) Over Voltage protection: Withstand up to

440V/AC for 4 Hrs. (M)Surge protection : Min. 2KV

(N) IP rating: IP 20 (O) IK rating : IK 02 (P) Short circuit

Open circuit & Reverse Polarity Protection must be provided

(Q) Fixing clamp design & strength should be sufficient

to hold the fitting erected on wall or ceiling.

(R) 3 core copper wire of appropriate size with earthing

connector (Note:-The manufacturer/ authorized Channel

partner of the manufacturer has to submit 5 yrs free

replacement Guarantee for complete Fixture) [Approval

will be given strictly subject to item specification]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

31 Providing, erecting, testing Ceiling Fan confirming to IS: 1.00 Each 1929.00 Rupees One Thousand Nine Hundred

374/1979 AMDT No. 1 to 6 Class-I, 50 Hz. Specification of Twenty Nine Only

Ceiling Fan must be as per below. (1) Sweep: 1200 mm, (2)

Operating Voltage: 180 to 230 V, (3) Power Factor: > 0.9, (4)

Power Consumption: maximum 53W, (5) RPM: minimum

330, (6) Service value:min 4.3 m3/min. (7) Class of insulation:

'B', (8) No. of heavy duty premium quality Ball bearing: Two,

(9) Total Body: Top & Bottom should be alluminium, (10)

Blade: Aluminium approx 1.1 mm thick, (11) Colour: White

high grade powder coating, (12) Canopy: Two Nos. Heavy

duty, (13) Condenser: Min. 1.5 MFD (15% Tolerence) as per

IS:1709-1984, (14) Down road: up to 1.0 mtr as per site

requirment, (15) Required fixing accessories, (16) 3 core

0.75 sq.mm ISI wire as per site requirment, (17) No vibration

and noise due to mechanical parts. (18) Safety wire provided

by manufacturer with ceiling fan. (Agency has to erect safey

wire with ceiling fan and checked with EIC) (OEM has to

approved model as per tender specification and tested at

32 Providing Fan clamp of 30 x 5 mm flat of required length & 10 1.00 Each 98.00 Rupees Ninety Eight Only

mm M.S. Bolt & Nuts erected with necessary hook of 10 mm

M.S. Round Bar.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

33 Providing & Erecting 2.0 mtr. long Earthing system by making 1.00 Each 7025.00 Rupees Seven Thousand Twenty Five

minimum bore of 225 mm dia. in soft soil. Suitable for doing Only

pipe-in-pipe technology earthing. Earthing electric rod must be

made from Corrosion free hot dip galvanizing pipes having

following specification.

(A) Earthing Electrode: outer Pipe: - 88 mm minimum O.D., 'B

' Class ISI mark of Reputed Brand, Inner pipe: - 42 mm

minimum O.D., Pipe B Class ISI mark reputed Brand.

Terminal Size: 70 mm X 100 mm length, Terminal should be

made from inner pipe for that pipe must be pressed and gave

rectangular shape so its work as a terminal. The hot deep

galvanising must be done after above process. Galvanised

thickness must be minimum 75 micron anywhere. SS Nut

bolt:- 2 nos. with washer suitable for 14 mm dia. hole must be

provided at terminal. Total minimum Weight (approx.) of earth

electrode with inside conductive material be 26 kg.

(B) Inner chemical (CCM Compound):- Resistivity:- 0.2 ohm/

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt

at no load & dry form, Sulphur content:- <2%

(C) Back fill Compound:- Earthing compound should be

capable to retain moisture for long time. Back Filling

Compound weight is 25 Kg.

(D) Chamber and cover:- Earthing chamber should be size of

400 mm X 400 mm X 400 mm depth and Cover should be

heavy duty cast iron with required size of 300 mm X 300 mm

X 4 mm thick.

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL

accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of

[Make and model approved by EIC Strictly subject to item

specification only] [OEM has to submit all detail & sample for

approved before supplying]

[Water must be poured in bore before starting earthing.

Earthing value must be measured with earth tester. Agency

has to bring the earth resistance to at least 02 ohms & voltage

between neutral & Earthing upto 02 volt. Agency has to

maintain earthing & its value for one year. Earthing must be

done in the presence of A.E. (GSPHCL)]

34 Providing & Erecting Mains with ISI marked, 1.1 KV grade 20.00 Mtr. 70.00 Rupees Seventy Only

electrolyte multi stranded, annealed copper conductor with

heat resistant PVC insulated conforms to IS:694, IEC -

erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters &

control wiring) with required size of copper lugs, nuts and

bolts if required. (e) One wire 6.00 sq. mm

35 Providing & erecting 415 V MCB Four Pole for Motor & 1.00 Each 728.00 Rupees Seven Hundred Twenty Eight

Inductive Load (C Curve) having 10KA breaking capacity & Only

confirms to IS :8828 in existing box having following capacity

For 40 Amp.

36 Supplying & erecting approved make SMC press moulded 2.00 Each 295.00 Rupees Two Hundred Ninety Five

composite FRP. loop-in, loop-out approx. 2mm thick box Only

complete with bakelite connector strip 4way & hinged doors

having locking arrangements with mounting clamp with nuts,

bolts & washers suitable for erection on pole with cable

clamps& earth bolt of following size of box. For 140mm x

140mm x 100mm [deep]

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

37 SITC of Outdoor aesthetically designed LED Flood Light 10.00 Each 6316.00 Rupees Six Thousand Three Hundred

Luminaire with total consumption of maximum 120 W with Sixteen Only

single piece die cast aluminium housing, high power LED

shall be mounted on high quality metal core based PCB with

extremely precison designed heat sink, complete with IP66

protection Class, with polycarbonate / Toughened glass

cover. The fixture should be suitable for pole/bracket

mounting. The fixture to comply both LM79 and LM

guidelines with LED minimum 130 lumen/watt with L70 at

50,000 hrs, provided with high quality polycarbonate lenses

for better light distribution. The Fixture Should be able to be

Pole Mounted and also bracket mounted, provided with high

quality potted driver for protection against, high and low

Voltage cut Off, opertional for high amibient and high humid

envirnoments, THD of driver should be less than 10% and P.F

> 0.95. Also the Fixture should meet the following technical

criterias. Operating range Voltage 160 to 270 V, system

efficiency >= 110 lm/w, CCT > 5000K, CRI >65, beam angle

120 deg, surge immunity level at least 4KV integral & 10 KV

nonintegral. Flood Light lumens shall be not less than

(Note:- The manufacturer / authorized Channel partner of the

manufacturer has to submit 5 yrs free replcement Guarantee

for complete Fixture)

38 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured 111.00 Mtr. 451.00 Rupees Four Hundred Fifty One Only

cable multistrand Copper conductor for 1.1 KV. to be laid on

wall with necessary clamps 1.00 mm thick to be laid 90 cms

underground with 1.00 mm thick G.I heavy duty grade or in

existing trench / pipe at road crossing or floor of following

size of cables.(A) 4 core 4 Sq. mm

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

39 Providing & laying HDPE Double walled corrugated pipes 91.00 Mtr. 117.00 Rupees One Hundred Seventeen

(DWC) (conforming to IS: 16205 (part 24) 2018)) with Only

minimum load required of 450N capacity with anti rodent and

ultra violet material properties with necessary connecting

accessories of same material at required depth to be laid

cms. under ground for laying of cable below ground / road

surface for enclosing cable and back filling the same to make

ground as per original. (A) For Outer dia. 50 mm and Inner

dia. 38 mm. (Test Certificate to be Submitted)

40 Supplying and erecting approved make Bracket fan of 230 4.00 Each 2085.00 Rupees Two Thousand Eighty Five

volt, A.C. 50 Cy/s., 400/450 mm sweep complete erected on Only

wall or with lead Cores and connections complete.Cat.II

41 Supplying and erecting LED indoor fittings with LEDs of 30.00 Mtr. 134.00 Rupees One Hundred Thirty Four

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB, Only

with housing used as a heat sink shall be made of thick sheet

Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance

with diffuser housed in aluminium casted body with company

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED

capacity between the ranges shown.) (D) LED Strip Light (i)

Minimum 4.8W-120 LED per meter (2 wire, IP-65) with non

integral suitable Driver complete Cat-lll

Item Estimated Rate (in Rupees)

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

42 providing and Erecting LED Bollard fittings of minimum height 4.00 Each 1749.00 Rupees One Thousand Seven

400 mm and dia.100mm having polycarbonate clear/milky Hundred Forty Nine Only

diffuser mounted on 3mm thick aluminium finished powder

coated pipe with base plate 160x160mm with erection by

M8x75mm fastner with required RCC foundation.IP65 for

watt,surge-4kv- cat-III

43 Providing & fixing Double compressed heavy duty flange type 4.00 Each 43.00 Rupees Forty Three Only

brass cable gland with rubber ring for P V C insulated

armoured cable complete with outgoing tails, insulating tape

etc. For following size cables. For 2 to 4 core x 4.0 Sq. mm

(Sigma, MCI, Comet, HMI Make Only)

44 Providing & fixing Solderless crimping type Copper lugs 128.00 Each 8.00 Rupees Eight Only

conforming to IS suitable for cable of following size evenly

crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved

manner. [a] 1.5/2.5 to 6 Sq.mm

Signature of Contractor Executive Engineer

GSPHCL Surat