Construction Of Centre of Excellence at Chhala. Dist- Gandhinagar (Incl Electrification )

No. In Figure In Words

1 Excavation for foundation upto 1.5 Mt. depth incluing 6146.00 Cmt 121.91 Rs. One

sorting out and stacking of useful materials and disposing of Hundred

the excavated stuff for any lead and lift (A) LOOSE OR Twenty One

SOFT & Paise

Ninety One

2 Excavation (by machinery) for foundation in dense or hard 5.00 Cmt 134.95 Rs. One

soil 1.5 m to 3.00mtr. depth including sorting out and Hundred

stacking of useful materials and disposing of the excavated Thirty Four &

stuff any lead & lift. Paise Ninety

3 Excavation for foundation 1.5 to 3 Mt. depth incluing sorting 782.00 Cmt 168.81 Rs. One

out and stacking of useful materials and disposing of the Hundred

excavated stuff for any lead and lift (B) Dence or Hard Sixty Eight &

Paise Eighty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

4 Excavation for foundation in dense or hard soil from 3.0 TO 162.00 Cmt 181.13 Rs. One

5.0MT. depth including sorting out and stacking of useful Hundred

materials and disposing of the excavated stuff any lead & Eighty One &

lift.( A ) Dense or Hard Soil Paise

Thirteen Only

5 Excavation (by machinery) for foundation in dense or hard 5.00 Cmt 148.17 Rs. One

soil 3.0 m. to 5.00 mtr depth including sorting out and Hundred

stacking of useful materials and disposing of the excavated Forty Eight &

stuff any lead & lift. Paise

6 Providing and laying Cement concrete 926.00 Cmt 2732.02 Rs. Two

1:4:8(1cement:4coarse sand :8 Machine crush stone Thousand

aggregate 40mm nominal size) and curing etc complete Seven

including cost of form work in (A) Foudation and plinth Hundred

Thirty Two &

7 Proveding and laying ordinary cement concrete 1:3:6 (1 655.00 Cmt 3054.35 Rs. Three

cement : 3 coarse sand : 6 graded machine broken stone Thousand

aggregate 40mm nominal size ) and curing complete Fifty Four &

including cost of from work in FOUNDATION AND PLINTH. Paise Thirty

8 Filling available excavated earth (excluding rock ) in 3374.53 Cmt 135.56 Rs. One

trenches, plinth sides of foundation etc. in layers not Hundred

exceeding 20 cms. in depth consolidation each deposited Thirty Five &

layer by ramming and watering. Paise Fifty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

in layers of 20cm. thickness including watering, ramming Hundred

and consolidating etc. complete. Seventy Four

& Paise Forty

10 205.00 Cmt 476.93 Rs. Four

FILLING in plinth with SAND under floors including Seventy Six

watering, raming, consolidating and dressing etc. complete. & Paise

Ninety Three

11 110.00 Cmt 2570.85 Rs. Two

Proveding and laying ordinary cement concrete 1:5:10 (1 Five Hundred

cement : 5 coarse sand : 10 graded machine broken stone Seventy &

aggregate 40mm nominal size ) and curing complete Paise Eighty

excluding cost of from work in FOUNDATION AND PLINTH. Five Only

12 Applying general insecticide pest control treatment to floors, 1444.00 Sqm 90.72 Rs. Ninety &

cupboards etc including labour material etc. complete.

Seventy Two

Using Heptachloride 20 EC. As Per 6113_pests

Consentration Weight 0.50 percent is recommended one

litre chemical emulsion dillute with 39 liter of water will give.

Total dillute concrentration will be 40 litre inclusive of one

litre chemical emulsion appication 0.5 Litre chemical / Sqm

of surface is recommended as per I.S

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

13 163.00 Cmt 4061.02 Rs. Four

Providing & laying Controlled Cement Concrete M-150 and

curing complete Including the cost of form work of plywood

Sixty One &

only with fair finish & proping must be of steel only so as to

give a fair finish but excluding the cost of reinforcement for

reinforced concrete work in foundation & plinth. Rate are

also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.Grade slab

14 Providing and laying in position Ready Mixed M-150 grade 3.00 Cmt 4009.13 Rs. Four

concrete for reinforced cement concrete work, using Thousand

cement content as per approved design mix, manufactured Nine & Paise

in fully automatic batching plant and transported to site of Thirteen Only

work in transit mixture for a lead upto 10 kms having

continuous agitated mixer, manufactured as per mix design

of specified grade for reinforced cement concrete work

including pumping of RMC from transit mixer to site of

laying and finishing, including cost of formwork (formwork of

plywood only with fair fifnish & proping must be of steel

only), providing & mixing admixtures in recommended

proportions as per IS:9103 to accelerate/retard setting of

concrete, improve workability without impairing strength and

durability as per direction of the Engineer - in - charge.

Without Fly Ash but excluding cost of reinforcement. (Min.

cement level as per latest IS 456 shall be maintained) (Min.

cement level 380 kg) in Foundation Footing and Mass

15 509.00 Cmt 6101.00 Rs. Six

Providing and laying Controlled cement concrete M-250 and

finishing smooth with curing etc.. complete Including the

One Hundred

cost of form work of plywood only with fair finish & proping

must be of steel only so as to give a fair finish but exculding

the cost of reinforcement for COPING . Rate are also

inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

16 1203.00 Cmt 4674.84 Rs. Four

Providing and laying Controlled cement concrete M-250 and

finishing smooth with curing etc.. complete Including the

Six Hundred

cost of form work of plywood only with fair finish & proping

Seventy Four

must be of steel only so as to give a fair finish but exculding

the cost of reinforcement for Footing . Rate are also

Eighty Four

inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

17 Providing & laying controlled CEMENT CONCRETE of M- 69.00 Cmt 8932.05 Rs. Eight

250 and Finishing smooth with curing complete Including Thousand

the cost of form work of plywood only with fair finish & Nine

proping must be of steel only so as to give a fair finish but Hundred

excluding the cost of reinforcement for RCC work in Thirty Two &

Column up to plinth for any cross sectional area. of Column Paise Five

Rate are also inclusive of providing and mixing Plasticizer of Only

approved make in proportion as Per Mix Design.

18 92.00 Cmt 7257.99 Rs. Seven

Providing and laying Controlled cement concrete M-250 and

finishing smooth with curing etc.. completeIncluding the

Two Hundred

cost of form work of plywood only with fair finish & proping

Fifty Seven &

must be of steel only so as to give a fair finish but exculding

Paise Ninety

the cost of reinforcement for PLINTH BEAMS of any cross

sectional area of beam. Rate are also inclusive of providing

and mixing Plasticizer of approved make in proportion as

Per Mix Design.

19 Providing & laying controlled CEMENT CONCRETE of M- 58.00 Cmt 10723.87 Rs. Ten

200 and Finishing smooth with curing completeIncluding the Thousand

cost of form work of plywood only with fair finish & proping Seven

must be of steel only so as to give a fair finish but excluding Hundred

the cost of reinforcement for RCC work in Column FOR Twenty

GROUND FLOOR for any cross sectional area. of Column Three &

Rate are also inclusive of providing and mixing Plasticizer of Paise Eighty

approved make in proportion as Per Mix Design. Seven Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

20 Providing & laying controlled CEMENT CONCRETE of M- 20.00 Cmt 10764.58 Rs. Ten

200 and Finishing smooth with curing completeIncluding the Thousand

cost of form work of plywood only with fair finish & proping Seven

must be of steel only so as to give a fair finish but excluding Hundred

the cost of reinforcement for RCC work in Column FOR Sixty Four &

First FLOOR for any cross sectional area. of Column Rate Paise Fifty

are also inclusive of providing and mixing Plasticizer of Eight Only

approved make in proportion as Per Mix Design.

21 Providing & laying controlled CEMENT CONCRETE of M- 4.00 Cmt 10805.29 Rs. Ten

200 and Finishing smooth with curing completeIncluding the Thousand

cost of form work of plywood only with fair finish & proping Eight

must be of steel only so as to give a fair finish but excluding Hundred Five

the cost of reinforcement for RCC work in Column FOR & Paise

SECOND FLOOR for any cross sectional area. of Column Twenty Nine

Rate are also inclusive of providing and mixing Plasticizer of Only

approved make in proportion as Per Mix Design.

22 Providing and laying Controlled cement concrete M-200 and 99.00 Cmt 8995.18 Rs. Eight

finishing smooth with curing etc.. complete Including the Thousand

cost of form work of plywood only with fair finish & proping Nine

must be of steel only so as to give a fair finish but exculding Hundred

the cost of reinforcement for BEAMS having any cross Ninety Five &

sectional area of Beam For GROUND FLOOR. Rate are Paise

also inclusive of providing and mixing Plasticizer of Eighteen

approved make in proportion as Per Mix Design. Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

23 Providing and laying Controlled cement concrete M-200 and 22.00 Cmt 9035.89 Rs. Nine

finishing smooth with curing etc.. complete Including the Thousand

cost of form work of plywood only with fair finish & proping Thirty Five &

must be of steel only so as to give a fair finish but exculding Paise Eighty

the cost of reinforcement for BEAMS having any cross Nine Only

sectional area of Beam For FIRST FLOOR. Rate are also

inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

24 Providing and laying Controlled cement concrete M-200 and 5.00 Cmt 9076.60 Rs. Nine

finishing smooth with curing etc.. complete Including the Thousand

cost of form work of plywood only with fair finish & proping Seventy Six

must be of steel only so as to give a fair finish but exculding & Paise Sixty

the cost of reinforcement for BEAMS having any cross Only

sectional area of Beam For SECOND FLOOR. Rate are

also inclusive of providing and mixing Plasticizer of

approved make in proportion as Per Mix Design.

25 Providing & Laying Controlled Cement Concrete M-200 and 49.00 Cmt 8054.31 Rs. Eight

finishing smooth with Curing Complete Including the cost of Thousand

form work of plywood only with fair finish & proping must be Fifty Four &

of steel only so as to give a fair finish but excluding cost of Paise Thirty

the reinforcement for RCC Work in SLAB having thickness One Only

of 10cm TO 13cm at Ground floor. Rate are also inclusive

of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

26 136.00 Cmt 7627.61 Rs. Seven

Providing & Laying Controlled Cement Concrete M-200 and

finishing smooth with Curing Complete Including the cost of

Six Hundred

form work of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding cost of

the reinforcement for RCC Work in SLAB having thickness

Paise Sixty

of 13cm TO 15cm at Ground floor. Rate are also inclusive

of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

27 45.00 Cmt 7668.32 Rs. Seven

Providing & Laying Controlled Cement Concrete M-200 and

finishing smooth with Curing Complete Including the cost of

Six Hundred

form work of plywood only with fair finish & proping must be

Sixty Eight &

of steel only so as to give a fair finish but excluding cost of

Paise Thirty

the reinforcement for RCC Work in SLAB having thickness

of 13cm TO 15cm at First floor. Rate are also inclusive of

providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

28 7.00 Cmt 7709.03 Rs. Seven

Providing & Laying Controlled Cement Concrete M-200 and

finishing smooth with Curing Complete Including the cost of

form work of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding cost of

Nine & Paise

the reinforcement for RCC Work in SLAB having thickness

Three Only

of 13cm TO 15cm at Second floor. Rate are also inclusive

of providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

29 11.00 Cmt 8372.86 Rs. Eight

Providing and laying Controlled cement concrete M-200 and

finishing smooth with Curing etc complete for R.C.C. STAIR

CASE Including the cost of form work of plywood only with

fair finish & proping must be of steel only so as to give a fair

Seventy Two

finish but excluding cost of reinforcement for ALL

FLOORS.Rate are also inclusive of providing and mixing

Eighty Six

Plasticizer of approved make in proportion as Per Mix

30 11.00 Cmt 8707.55 Rs. Eight

Providing & Laying Controlled Cement Concrete M-200 and

finishing smooth with Curing Complete Including the cost of

form work of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding cost of

the rainforcement for Lintel at Ground Floor. Rate are also

Paise Fifty

inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

31 2.00 Cmt 8748.26 Rs. Eight

Providing & Laying Controlled Cement Concrete M-200 and

finishing smooth with Curing Complete Including the cost of

form work of plywood only with fair finish & proping must be

of steel only so as to give a fair finish but excluding cost of

Forty Eight &

the rainforcement for Lintel at First Floor. Rate are also

Paise Twenty

inclusive of providing and mixing Plasticizer of approved

make in proportion as Per Mix Design.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

32 Provinding and Laying controlled cement concrete M-200 17.00 Cmt 9747.02 Rs. Nine

for reinforced conerete CHHAJJAS having any thickness up Thousand

to any floor level including finishing the exposed surface Seven

with cement mortar 1:3 ( 1 cement : 3 fine sand) to give a Hundred

finishing with curing etc. complete Including the cost of form Forty Seven

work of plywood only with fair finish & proping must be of & Paise Two

steel only so as to give a fair finish but excluding cost of Only

reinforcement for ALL FLOOR. . Rate are also inclusive of

providing and mixing Plasticizer of approved make in

proportion as Per Mix Design.

33 1210.00 Cmt 4172.37 Rs. Four

Brick work using common burnt clay building bricks having One Hundred

crushing strength not less than 35 Kg/Sq.cm.in foundation Seventy Two

and plinth in cement mortar 1:6 (1-cement:6-coarse sand) & Paise

(B) Conventional bricks Thirty Seven

34 308.00 Cmt 4458.23 Rs. Four

BRICK WORK using common burnt clay building bricks

having crushing strength not less than 35 Kg./Sq. cm. In in

Hundred Fifty

cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional

Eight & Paise

Bricks ) for Ground Floor. Mortar shall be prepared by

mixture machine only.

Three Only

35 145.00 Cmt 4499.93 Rs. Four

BRICK WORK using common burnt clay building bricks

having crushing strength not less than 35 Kg./Sq. cm. In in

cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional

Ninety Nine

Bricks ) for First Floor. Mortar shall be prepared by mixture

machine only.

Ninety Three

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

36 50.00 Cmt 4541.63 Rs. Four

BRICK WORK using common burnt clay building bricks Thousand

having crushing strength not less than 35 Kg./Sq. cm. In in Five Hundred

cement mortar 1 : 6 ( 1 cement : 6 Fine sand ( Conventional Forty One &

Bricks ) for Second Floor. Mortar shall be prepared by Paise Sixty

mixture machine only. Three Only

37 4.00 Smt 623.56 Rs. Six

HALF BRICK WORK using common burnt clay building

bricks having crushing strength not less than 35 Kg./Sq.

cm.Super Structure above Plinth level in cement mortar 1 :

4 ( 1 cement : 4 coarse sand) conventional Bricks. For

Paise Fifty

Foundation & Plinth.

38 Half brick masonry in common burnt clay building bricks 135.00 Smt 679.00 Rs. Six

having crushing strength not less than 35 Kg/Sq.cm. in Hundred

cement mortar 1:4 (1-cement;4-coarse sand) in Ground Seventy Nine

Floor, Conventional bricks. Bricks with frog only shall be Only

39 Half brick masonry in common burnt clay building 30.00 Smt 685.24 Rs. Six

bricks having crushing strength not less than 35 Hundred

Kg/Sq.cm. in cement mortar 1:4 (1-cement;4-coarse Eighty Five &

sand) in First Floor, Conventional bricks. Bricks with Paise Twenty

frog only shall be used. Four Only

40 Providing 10 mm thick cement PLASTER in single coat 1201.00 Smt 209.88 Rs. Two

on ceilings for interior plastering and finished even & Hundred

smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Nine & Paise

finishing with a floating coat of neat cement slurry at Eighty Eight

GROUND FLOOR. Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

41 Providing 10 mm thick cement PLASTER in single coat 285.00 Smt 236.99 Rs. Two

on ceilings for interior plastering and finished even & Hundred

smooth in C.M. 1: 3 ( 1 cement : 3 sand ) including Thirty Six &

finishing with a floating coat of neat cement slurry at Paise Ninety

First FLOOR. Nine Only

42 Providing 10 mm thick cement PLASTER in single coat on 20.00 Smt 264.10 Rs. Two

ceilings for interior plastering and finished even & smooth in Hundred

C.M. 1: 3 ( 1 cement : 3 sand ) including finishing with a Sixty Four &

floating coat of neat cement slurry at Second FLOOR. Paise Ten

43 Provinding 15 mm thick cement PLASTER in single coat on 2439.00 Smt 213.51 Rs. Two

brick or concrete wall for interior plastering and finished Hundred

even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Thirteen &

including finishing with floating coat of neat cement slurry Paise Fifty

at GROUND FLOOR. One Only

44 Provinding 15 mm thick cement PLASTER in single coat on 700.00 Smt 242.77 Rs. Two

brick or concrete wall for interior plastering and finished Hundred

even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Forty Two &

including finishing with floating coat of neat cement slurry Paise

at First FLOOR. Seventy

Seven Only

45 Provinding 15 mm thick cement PLASTER in single coat on 70.00 Smt 272.03 Rs. Two

brick or concrete wall for interior plastering and finished Hundred

even and smooth in C.M. 1:4 ( 1 cement : 4 sand ) Seventy Two

including finishing with floating coat of neat cement slurry & Paise

at Second FLOOR. Three Only

46 Providing 20 mm thick SAND FACED cement Plaster on 11702.00 Smt 312.56 Rs. Three

walls above ground level consisting 12 mm thick backing Hundred

coat of C.M. 1: 3 ( 1 cement : 3 sand ) and 8mm thick Twelve &

finishing coat of C.M. 1:1 ( 1 cement : 1 sand ) etc. Paise Fifty

Complete for any height. Mortar shall be prepared by Six Only

mixture machine only. Plaster should be done by gutkha

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

47 Synthetic Texture Plaster with Double Coat Smooth plaster 2548.00 Smt 453.87 Rs. Four

: Providing 20mm thick cement plaster in single coat Hundred Fifty

plastering upto for Outside and finished even and smooth in Three &

(i) Cement mortar 1:3 (1-cement : 3-sand) as Base Coat Paise Eighty

and providing 2-3 mm thick synthetic texture plaster of Seven Only

approved texture including cost of all rate are materials,

labour, conveyance, loading and unloading, taxes, royalties,

scaffolding, watering etc.complete for any Height as per

Drawing and instructions of Engineer -in -Charge.(Material

Shall be Used as Approved By GSPHCL Only )

48 Finishing Ceilling/Slop Surface with Plastic Emulsion Paint 1506.00 Smt 193.29 Rs. One

on Ceilling/Slop Surface (two coats) to give an required Hundred

shap even shade after throughly brushing the surface to Ninety Three

remove all dirt and remains of loose poweder material etc. & Paise

complete. Rate are inclusive of applying two coat of lapy Twenty Nine

(Putty) and one coat of primer on new Ceilling/Slop Surface Only

to give and even shade including thoroughly brushing the

surface free from mortar dropping andother foreign matter

and sand papered smooth. Fine Putty primers and Plastic

Emulsion Paint Shall Be Used As Per approved Material

List By G.S.P.H.C

49 Finishing Wall with Plastic Emulsion Paint on Wall Surface 2874.00 Smt 180.25 Rs. One

(two coats) to give an required shap even shade after Hundred

throughly brushing the surface to remove all dirt and Eighty &

remains of loose poweder material etc. complete. Rate are Paise Twenty

inclusive of applying two coat of lapy (Putty) and one coat Five Only

of primer on new wall surface to give and even shade

including thoroughly brushing the surface free from mortar

dropping and other foreign matter and sand papered

smooth.primers,Putty and Plastic Emulsion Paint Shall Be

Used As Per approved Material List By G.S.P.H.C

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

50 Finishing wall with weather proof exterior emulsion paint on 14615.00 Smt 153.35 Rs. One

wall surface (two coats) over and above applying One Coat Hundred Fifty

Of Primer to give an required shape even shade after Three &

thoroughly brushing the surface to remove all dirt, and Paise Thirty

remains of loose powdered materials.etc complete.primers Five Only

and exterior Emulsion Paint Shall Be Used As Per

approved Material List By G.S.P.H.C

51 Providing & Laying 24" x 24" Double Charge vitrified 8 to 10 826.00 Smt 1580.10 Rs. One

mm thick tile flooring over 20 mm (average) base of cement Thousand

mortar 1:6 ( 1 cement: 6 coarse sand) on new surface Five Hundred

orfixing on existing flooring by adhesive including Eighty &

dismentaling of existing flooring and material jointed with Paise Ten

color cement slurry including finised with flush pointing & Only

cleaning the surface etc. complete for all Floors. Material

shall be used as per approved make list by GSPHCL.

52 Providing & Laying 24" x 24" Double Charge vitrified 8 to 63.00 Smt 1371.30 Rs. One

10 mm thick tile Skirting riser of Step and Dedo On 10mm Thousand

Thick Cement plaster mortar 1:3 ( 1 cement: 3 coarse Three

sand) & Jointed with Colour Cement Slury including Hundred

finised with flush pointing & cleaning the surface etc. Seventy One

complete for all Floors. Material shall be used as per & Paise

approved make list by GSPHCL. Thirty Only

53 Providing & Laying Anti skid ceramic tiles 6mm thick in 100.00 Smt 1453.19 Rs. One

flooring treads of steps and landing laid on a bed of 12mm Thousand

thick cement mortar 1:3 (1 cement : 3 coarse sand) Four

finishing with flush pointing in white cement. The size of Hundred Fifty

tiles shall be 600mm X 600mm (Material Shall be Used as Three &

Approved By GSPHCL Only ) Paise

Ninteen Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

54 Provinding & laying Printed Coloured GLAZED TILES 8mm 375.00 Smt 1063.37 Rs. One

thick in skirting, risers of steps and DADO on 10mm thick Thousand

cement plaster 1: 3 ( 1 cement : 3 coarse sand ) & jointed Sixty Three &

with white cement slurry. including curing for all Floors size Paise Thirty

of Tiles Shall be 600mmx300mm Seven Only

55 Kotah stone slab (Polished, Green uniform color, all edge of 530.00 Smt 1078.70 Rs. One

kotah stone slab should be chiseled dressed) flooring over Thousand

20 mm (average) thick base of cement mortar 1:6 (1 Seventy

cement: 6 coarse sand over and jointed with grey cement Eight & Paise

slurry including rubbing and polishing complete 25 mm Seventy Only

56 Providing and laying 25mm thick Pre polished Dimond cut 37.00 Smt 1313.40 Rs. One

kota stone in risers of steps, dedo, skirting and pillars laid Thousand

in 10mm thick cement mortar 1:3 (1 cement : 3 coarse Three

sand) & joined with grey cement slurry mixed with Pigment Hundred

to match The Shade Of Slab including rubbing polishing Thirteen &

etc All Floors Paise Forty

57 Granite stone slab 18mm thick in dado, sill and jambs laid 132.00 Smt 2428.00 Rs. Two

on 10 mm thick cement mortar 1:3 (1 cement: 3 coarse Thousand

sand) and jointed with high polymer modified quick set Four

adhesive (water based) including rubbing and polishing etc. Hundred

complete. Telephonic black granite or as specified in tender Twenty Eight

item. Only

58 Providing and laying Telephonic Black Granite 15mm to 165.00 SMT 2158.45 Rs. Two

18mm thick STONE SLAB FLOORING over 20mm average Thousand

thick base of cement mortar 1:6 ( 1 cement : 6 coarse sand) One Hundred

laid over & jointed with grey cement slurry including rubbing Fifty Eight &

& polishing etc. Complete. Paise Forty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

59 Pro. 3 Nos Groove In Total Length Of Staircase Tread Of 240.00 Rmt 82.80 Rs. Eighty

Size 10mm*10mm Finished Smooth In Parallel Line , Two & Paise

Equally Spaced As Per Direction Of Engineer In-Charge In Eighty Only

All Type Of Flooring , Etc. Complete

60 240.00 Rmt 129.95 Rs. One

Moulding Of Kota Stone/Granite for Stair Trade etc Twenty Nine

Complete As Per Direction Of Engineer In Charge & Paise

Ninety Five

61 20.00 Smt 2363.47 Rs. Two

Providing and laying polished Telephonic Black Granite

15mm to 18mm STONE SLAB RISERS of steps, dedo and

pillars laid on 10 mm thick C.M. 1 :3 ( 1 cement : 3 coarse

Sixty Three &

sand) and jointed with gray cement slurry inculding rubbing

Paise Forty

and polishing etc. complete.

Seven Only

62 Providing and laying Integrated cement based proprietary 1028.00 Smt 912.58 Rs. Nine

water proofing treatment of required thickness over the roof Hundred

incl.10mm thick waterproofing cement plaster in cement Twelve &

mortar 1:3 and china mosaic fitting and finally finishing the Paise Fifty

surface with white cement slurry and sloping out terrace Eight Only

slab with following specification laid to required slope not

flatter that 1:80 (the thickness of water proofing treatment

near rainwater outlet or the lowest point of the finished slop

shall not be less than 45mm incl. treating the vertical

surface of the parapet wall unto 20 cms. height above

finished level of terracing incl. finishing the top with joint

less water proofing plaster, curing testing etc. complete.)

Rate is including ten years performance of guarantee bond

to be given on stamp paper. (No. extra shall be paid for

increase in thickness for proper slope.)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

a)Applying and grouting a slurry coat of neat cement using 0.00

2.75 kg/sqm. of cement admixed with proprietary water

proofing compound conforming to IS-2645 and 10mm thick

water proofing cement plaster in Cement mortar 1:3 over

the R.C.C slab including cleaning the surface before

treatments.

b)Laying cement concrete using broken brick bats 25 mm to 0.00

40 mm size with 50% of cement mortar 1:4(1 cement :

coarse sand) over 10mm thick water proofing cement

mortar 1:3 (1 cement : 3 coarse sand) admixed with

proprietary water proofing compound conforming to IS -

2645 to required slope and treating similarly the adjoining

walls upto 200mm height including rounding of junction of

(c) After two day of proper curing applying a second coat of 0.00

cement slurry.

(d)Finishing the surface with china mosaic pieces laid on 0.00

10mm thick joint less cement plaster of mix 1:3 ( 1 cement :

3 coarse sand) admixed with proprietary water proofing

compound conforming to IS-2645 and finally finishing the

surface with trowel with neat slurry.

(e)The whole terrace so finished shall be flooded with water 0.00

for a minimum period of two weeks for curing for final test

all above operation to be done in order and as directed and

specified by the Engineer in change.

All above operation to be done in order and as directed 0.00

and specified by the Engineer In Charge.

63 Providing Supplying and Fixing of 32mm ( Total ) Thick 85.00 Smt 11082.31 Rs. Eleven

Single Flush Door Shutter with 1mm Thick Laminates on Thousand

Both Side of Shutter . Making / Construction of Flush Door Eighty Two &

is with Pine or southern Yellow Pine Filler and 2 5mm core Paise Thirty

veneer Both Side and 0 4mm Face Veneer on Both Side One Only

with Lock rail on Center .......

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

........Flush Door Provide with Teak wood beading patti ( 0.00

32mm X 12mm ) on Peripheries of Flush Door with Door

Frame of Non Teak Solid Wood of size 150mm x 70mm

with Chemically Treated and Seasoned Including Paint

Matching with Laminates Frame & Flush door shutter

having 5 year warranty against attack of biological agent

.......termite , borers , decay fungi and harmful insects also 0.00

warranty against seasoning related issues like crack

bending twisting warping Laminates on shutter shall be

press by cold press method Shutter shall be brought to site

in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc.........

........ Rates are also Inclusive of all Labors & Proviging 0.00

15cm Long 6 No of Hold Fast ( 25mm X 5mm ) & 3 No of

Inch S.S. but Hinges 100mm x 75 mm x 3mm thick

required Screw & Nails per Frame and Fixing following S S

Fixtures And Fastening ( 1 ) Aldrops 1 No , 250mm x 16mm

& Tadi 1 No. ( 2 ) Door Stopper 1 No , 100mm Long , ( 3 )

.......Double Leg Heavy Push Door Stopper 1 No & ( 4 ) 0.00

Handle 2 No , 150mm Long X 10mm thick Door are Fixing

as per Details Drawing & Instruction of Engineer in charge

All Materials Used Shall be as Per approved Material Make

List of GS.PHC . The Required Frame is to be Obtained

from Vanil Udhyog Maked Only

64 Providing Supplying and Fixing of 32mm ( Total ) Thick 5.00 smt 10027.39 Rs. Ten

Single Flush Door Shutter with 1mm Thick Laminates on Thousand

Both Side of Shutter . Making / Construction of Flush Door Twenty

is with Pine or southern Yellow Pine Filler and 2 5mm core Seven &

veneer Both Side and 0 4mm Face Veneer on Both Side Paise Thirty

with Lock rail on Center ....... Nine Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

........Flush Door Provide with Teak wood beading patti ( 0.00

32mm X 12mm ) on Peripheries of Flush Door with Door

Frame of Non Teak Solid Wood of size 120mm x 65mm

with Chemically Treated and Seasoned Including Paint

Matching with Laminates Frame & Flush door shutter

having 5 year warranty against attack of biological agent

.......termite , borers , decay fungi and harmful insects also 0.00

warranty against seasoning related issues like crack

bending twisting warping Laminates on shutter shall be

press by cold press method Shutter shall be brought to site

in packed PVC bags & pvc coating shall be removed on

completion of work in such a way that shutter & Frame is

free from nail mark & any damages etc.........

........ Rates are also Inclusive of all Labors & Proviging 0.00

15cm Long 6 No of Hold Fast ( 25mm X 5mm ) & 3 No of

Inch S.S. but Hinges 100mm x 75 mm x 3mm thick

required Screw & Nails per Frame and Fixing following S S

Fixtures And Fastening ( 1 ) Aldrops 1 No , 250mm x 16mm

& Tadi 1 No. ( 2 ) Door Stopper 1 No , 100mm Long , ( 3 )

.......Double Leg Heavy Push Door Stopper 1 No & ( 4 ) 0.00

Handle 2 No , 150mm Long X 10mm thick Door are Fixing

as per Details Drawing & Instruction of Engineer in charge

All Materials Used Shall be as Per approved Material Make

List of GS.PHC . The Required Frame is to be Obtained

from Vanil Udhyog Maked Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

65 Providing and fixing solid PVC Flush Door shutter 24mm 40.00 Smt 4514.20 Rs. Four

thick. made from Co-extruded three layer rigid PVC foam Thousand

sheet(single Extruded) with density not less than Five Hundred

600kg/cbm outer layer (0.8-1mm)thick should be rigid PVC Fourteen &

with density of not less than 1400kg/cbm. Door should be Paise Twenty

water proof, Termite proof, fire retardant & having good Only

screw holding capacity(200 kgf). Providing and fixing 100%

Solid Wood Plastic composite (WPC) Door Frame

90mmx45mm made from wood plastic composite(single

Extruded Process) material with density 780kg/cbm. As per

drawing as directed by the engineer in charge.(Material

Shall be Used as Approved By GSPHCL Only )

66 Providing and fixing Alluminium section window having 83.00 Smt 1568.27 Rs. One

extruded Aluminum Colour anodized section frame main Thousand

outer size 95mm x 24mm x 1.17mm (of Jindal Section Five Hundred

no:2459 @ wt.of 0.738 Kg/mt), horizontal Foure track Sixty Eight &

member size 92mm x 31.75mm x 1.30mm (of Jindal Paise Twenty

Section no:8688,@ Wt.1.07 Kg/mt), vertical member of size Seven Only

92mm x 31.75mm x 1.50mm (of Jindal Section no:8933,@

Wt. 1.06 Kg/mt) with sliding shutters of horizontal member

size 40mm x 18mm x 1.29mm (of Jindal Section no:8947@

wt.of 0.456 Kg/mt), vertical member of size 40mm x 18mm

x 1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt)

with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details for ALL FLOORS.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

67 Providing and fixing standared extruded of alluminium 6.00 Smt 1163.92 Rs. One

section of size 63mm x 38.10mm x 1.2mm (Jindal Section Thousand

:2434, @ Wt. 0.643 Kg/mt) with colour anodized alluminium One Hundred

frame for ventilation with 5 mm thick frosted glass as Sixty Three &

details etc complete for Ventilation Paise Ninety

68 Pro. & Fixing colour Anodised Alluminium fixed louveres 39.00 Smt 1762.71 Rs. One

made of 1"*4" ALLUMINIUM SECTION of 2mm thick Thousand

(jindal/Banco make)fixed at 0.14mt c/c with alluminium Seven

cleats to m.s. angular frame of 355mm*35mm duly Hundred

anodised and fixed with rcc/brick wall with fastners as per Sixty Two &

arch. drawings.all the screws and other visible fixtures are Paise

also to be anodised as per specification. Seventy One

69 Providing , Fabricating and fixing M.S. GRILL/GATE of 8605.00 Kg 75.11 Rs. Seventy

approved pattern fabricated from M.S. flat,square bars, Five & Paise

round bars,c-channel, square/round box pipe as per detail Eleven Only

Drawings. Rate is inclusive of welding with grinding smooth

surface, two coats of Oil paint and one coat of yellow Zinc

primer coat of approved brand only. all paint shall be used

as per Approved Material List By G.S.P.H.C the Structural

Steel Shall be used only ISI mark only. for all floor and at

any height only.

70 Providing & Fixing to Wall Ceilling and Floor SWR Rain 130.00 Rmt 302.54 Rs. Three

Water pipe as Per IS-13592 of 90mm Dia Complete Hundred Two

whithout Z patti ( minimum 1.60mm thick ) with minimum & Paise Fifty

6mm dia U Clamp and including making good the ceiling Four Only

and floor on terrace rain water pipe shall be 90 mm Dia.

SWR horizontal pipe and vertical pipe and 90mm bend at

the end near by Ground level rate are Inclusive of all

Necessary Fittings required. pipe As Per approved Material

List By G.S.P.H.C .

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

71 Providing and fixing to wall ceiling and floor U.PVC/S.W.R. 123.00 Rmt 245.74 Rs. Two

soil waste pipe with "O" ring of ISI13592/92-2013 Hundred

(Reaffirmed 2018) or its relevant & latest edition &, Pipe Forty Five &

fixing whithout Z patti (Minimum 1.6mm thick) with 6mm Paise

Dia U Clamp with washer for Vertical Drain pipe, Seventy Four

etc.complete and making good the wall ceiling and floor. Only

(A) 75mm dia pipe As Per approved Material List By

72 95.00 Rmt 471.36 Rs. Four

Providing and fixing to wall, ceiling and floor U.PVC SWR

soil waste pipe with ' O ' Ring 110 mm dia. of ISI13592/92-

Seventy One

2013 (Reaffirmed 2018) or its relevant & latest edition &

Pipe fixing whithout Z patti (Minimum 1.6mm thick) with

Thirty Six

6mm Dia U Clamp with washer for Vertical Drain pipe,

etc.complete and making good the wall ceiling and floor.

(B) 110mm dia [Rate Rs. 348.65 (332.62+16.03)]

73 80.00 Rmt 206.73 Rs. Two

Providing and fixing concealed or open center point to wall

Hundred Six

ceiling & floor CPVC (SDR 13.5) PIPE having National

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps

Three Only

including making good the wall, ceiling and floor etc.

complete. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of

GSPHCL make list. [A] 20 mm inner dia.

74 Providing and fixing concealed or open center point to wall 85.00 Rmt 251.31 Rs. Two

ceiling & floor CPVC (SDR 13.5) PIPE having National Hundred Fifty

Sanitation Foundation (NSF) seal for potable water of One & Paise

following dia. nominal bore tube fittings and clamps Thirty One

including making good the wall, ceiling and floor etc. Only

complete. Pipe shall be concealed or open as mention in

tender description. Pipe shall be as per approved make of

GSPHCL make list. [C] 25mm Dia

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

75 140.00 Rmt 443.29 Rs. Four

Providing and fixing concealed or open center point to wall

ceiling & floor CPVC (SDR 13.5) PIPE having National

Forty Three

Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittingswith Z patti

Twenty Nine

(Minimum 1.6mm thick) with 6mm Dia U Clamp with washer

for Vertical water supply pipe. Pipe shall be concealed or

open as mention in tender description. Pipe shall be as per

approved make of GSPHCL make list [E] 40mm Dia

76 Providing and fixing concealed or open center point to wall 120.00 Rmt 654.04 Rs. Six

ceiling & floor CPVC (SDR 13.5) PIPE having National Hundred Fifty

Sanitation Foundation (NSF) seal for potable water of Four & Paise

following dia. nominal bore tube fittingswith Z patti Four Only

(Minimum 1.6mm thick) with 6mm Dia U Clamp with washer

for Vertical water supply pipe. Pipe shall be concealed or

open as mention in tender description. Pipe shall be as per

approved make of GSPHCL make list[F] 50mm Dia

77 Providing & fixing Concealed Center Point to wall celing & 194.00 Rmt 1312.94 Rs. One

floor CPVC (SDR-13.5) PIPE having National Sanitation Thousand

Foundation (NSF) seal For Portable Water of 65 mm. dia. Three

nominal bor tube fitting and clamps including making Hundred

good the wall, ceiling and floor etc. Complete the rate are Twelve &

inclusiev GI Z Patti with 6mm dia U clamp with washer forf Paise Ninety

vertical water supplying.Materials used for the above items Four Only

Must be list approved by G.S.P.H.C.L.

78 Provinding and fixing gun metal check or non return full way 4.00 Nos 2302.33 Rs. Two

WHEEL / HANDLE VALVE 50 mm dia. Rate are inclusive Thousand

of all matreials, Labour & Necessary Fittings etc. Complete Three

as per Detailed Drawings, Specifications and as per the Hundred Two

Instruction of Engineer In charge. All material used as per & Paise

approved make list by GSPHCL. Thirty Three

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

79 Provinding and fixing gun metal check or non return full way 2.00 Nos 4865.50 Rs. Four

WHEEL / HANDLE VALVE 65 mm dia. Rate are inclusive Thousand

of all matreials, Labour & Necessary Fittings etc. Complete Eight

as per Detailed Drawings, Specifications and as per the Hundred

Instruction of Engineer In charge. All material used as per Sixty Five &

approved make list by GSPHCL. Paise Fifty

80 Provinding and fixing gun metal check or non return full way 4.00 Nos 656.86 Rs. Six

WHEEL / HANDLE VALVE 40 mm dia. Rate are inclusive Hundred Fifty

of all matreials, Labour & Necessary Fittings etc. Complete Six & Paise

as per Detailed Drawings, Specifications and as per the Eighty Six

Instruction of Engineer In charge. All material used as per Only

approved make list by GSPHCL.

81 Provinding and fixing CPVC SWR Nahni Trap of the 24.00 Nos 593.70 Rs. Five

following nominal dia. Self cleaning design with top jali and Hundred

stainer including cost of cutting and making good the walls Ninety Three

and floors 100mm inlet and 50mm outlet. Including 150mm & Paise

x 150mm stainless steel jali. Seventy Only

82 Providing and fixing U.PVC Multi Nahni trap of the following 14.00 Nos 508.29 Rs. Five

nominal diameter of self cleaning design with top stainless Hundred

steel jali and strainer including cost of cutting and making Eight & Paise

good the walls and floor 100 mm inlet and 50 mm 3nos Twenty Nine

outlet. Only

83 Provinding and fixing in position PVC COWEL VENT to 10.00 No. 28.16 Rs. Twenty

pipe 110 mm dia directed by as per engineer in charge. Eight & Paise

Sixteen Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

84 Provinding and fixing in position PVC COWEL VENT to 24.00 No. 16.47 Rs. Sixteen

pipe 75 mm dia directed by as per engineer in charge. & Paise Forty

Seven Only

85 Provinding 10mm thick cement PLASTER in single coat of 357.00 Smt 221.16 Rs. Two

interior plastering and finished even and smooth in cement Hundred

mortar 1:3 ( 1 cement : 3 sand ) and finishing with floating Twenty One

coat of neat cement slurry including providing and mixing & Paise

with WATER PROFFING material. For All Floors. Sixteen Only

86 P & L ordinary Cement Concrete 1:2:4 including finishing 20.00 Smt 365.48 Rs. Three

smooth and curing complete, including cost of formwork but Hundred

excluding cost of reinforcement.50mm thick IPS For all Sixty Five &

Floors. Paise Forty

Eight Only

87 Applying two coats of water proofing chemical (Zycosil) in 20.00 Smt 110.70 Rs. One

proportional 1:10 (one part of zycosil + 10 part of water) on Hundred Ten

the water proofing plaster including preparing the surface & Paise

and ponding test etc. complete as directed by Engineer-In- Seventy Only

88 Provinding and Filling Cinder including watering, 2.00 Cmt 791.68 Rs. Seven

consolidation etc. complete. For all lead & lift. Hundred

Ninety One &

Paise Sixty

Eight Only

89 Provinding CEMENT VATA (10cm x 10cm) size quarter 328.00 Rmt 24.04 Rs. Twenty

round in cement mortar (1 : 1) including neat cement Four & Paise

finishing, watering etc. Complete. Four Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

90 Providing and fixing Wash down white vitreious china WALL 14.00 Nos 5470.90 Rs. Five

HUNG (as Per Approved Material List )water closet Thousand

EUROPEAN TYPE W/C PAN of size 555x360x390mm with Four

intergal "P" trap including jointing the trap with pan and soil Hundred

pipe in vitereous china white colour. Rate inclusive of Seventy &

providing and fixing PVC Flush Tank (as Per Approved Paise Ninety

Material List ) Soft seat of the same make. Rate are Only

inclusive of all necessary fittings required for installation of

flushing tank and wall hung. Wall hung shall be fixed on S.S

heavy duty rack bolt having 16mm dia, 165mm length using

Plastic sleeve Make by Using Drill Bitt Only.

91 Providing & Fixing Health Faucets (ABS Body). Rate are 14.00 Nos 565.51 Rs. Five

inclusive of all matreials, Labour & Necessary Fittings etc. Hundred

Complete as per Detailed Drawings, Specifications and as Sixty Five &

per the Instruction of Engineer In charge. The Model & Paise Fifty

Make of Health Faucets Shall be as per the Approved Make One Only

List of GSPHCL

92 Providing & Fixing Two way Bib Tap with Wall Flange. Rate 14.00 Nos 1309.39 Rs. One

are inclusive of all matreials, Labour & Necessary Fittings Thousand

etc. Complet as per Detailed Drawings, Specifications and Three

as per the Instruction of Engineer In charge. Materials used Hundred

for the above items Must be list approved by G.S.P.H.C.L. Nine & Paise

Thirty Nine

93 Providing & Fixing 15mm One way Bib Tap with Wall 2.00 Nos 990.61 Rs. Nine

Flange. Rate are inclusive of all matreials, Labour & Hundred

Necessary Fittings etc. Complet as per Detailed Drawings, Ninety &

Specifications and as per the Instruction of Engineer In Paise Sixty

charge. Materials used for the above items Must be list One Only

approved by G.S.P.H.C.L.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

94 Providing & Fixing Urinal with P.V.C water pipe, 32mm dia. 11.00 Nos 2132.80 Rs. Two

C.P. brassa waste coupling with Connection 32mm dia Thousand

waste Pipe etc. Complete. Rate are inclusive of all One Hundred

matreials, Labour & Necessary Fittings etc. Complete as Thirty Two &

per Detailed Drawings, Specifications and as per the Paise Eighty

Instruction of Engineer In charge. The Model & Make of Only

Urinal Shall be as per the Approved Make List of GSPHCL.

95 Providing & Fixing Single Hole Wash Basin with CI or M.S. 10.00 Nos 3935.33 Rs. Three

brackete & M. I fisher union, P.V.C water pipe with Thousand

Connection from Stop Cock to Pillar Tap, incl angle Nine

cock,PVC Bottle Trap with Connection 32mm dia. C.P Hundred

brassa waste coupling etc. Complete. Rate are inclusive of Thirty Five &

all matreials, Labour & Necessary Fittings etc. Complete as Paise Thirty

per Detailed Drawings, Specifications and as per the Three Only

Instruction of Engineer In charge. The Model & Make of

Wash Basin,stop cock pillar tap, PVC Bottel Trap Shall be

as per the Approved Make List of GSPHCL

96 Providing & Fixing Towel Ring. Rate are inclusive of all 10.00 Nos 909.08 Rs. Nine

matreials, Labour & Necessary Fittings etc. Complet as per Hundred

Detailed Drawings, Specifications and as per the Instruction Nine & Paise

of Engineer In charge. Materials used for the above items Eight Only

Must be list approved by G.S.P.H.C.L.

97 Provinding and fixing 600mm x 450mm bevelled edge 10.00 Nos 850.90 Rs. Eight

MIRROR of superior glass mounted on 6mm thick A.C. Hundred Fifty

sheet or plywood sheet fixed to wooden plugs with C.P. & Paise

brass screws & washers. Ninety Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

98 Providing and fixing both side polished machine cut KOTA 8.00 Smt 793.90 Rs. Seven

STONE In Green Colour Shelves / Partitions 20mm to Hundred

25mm thick embaded in to wall at support including racking Ninety Three

and finishing smooth the surface including cutting the stone & Paise

as and where required etc. complete including fully Ninety Only

rounding of exposed edges etc. complete for ALL

99 Providing I.S.I. mark 7 levers three keys brass pad lock of 11.00 Nos. 243.64 Rs. Two

Navtal ( Godrej) make 65mm dia on completion Project etc. Hundred

Complete. Forty Three

& Paise Sixty

100 Provinding and fixing chicken wire mesh Jali 0.18 mm and 276.00 Smt 64.06 Rs. Sixty

0.18mm wide with necessary screws and nails to joint Four & Paise

between R.C.C. column and brick work etc. complete as per Six Only

Engineer-in-charge.

101 Providing and Fixing 3mm thick acrylic sheet with Vinyl 15.00 Smt 7193.89 Rs. Seven

letter colour-2073- dark grey for back ground and colour- Thousand

2199-white letter with required screws…etc as per required One Hundred

sizes complete etc as per specification & instruction as per Ninety Three

engineer Incharge. & Paise

Eighty Nine

102 Provinding supplying and fixing stainless steel letters 45.00 600.00 S.inch 118.20 Rs. One

cm height & 4.50 cm wide with apraying colour on surface Hundred

etc complete as directed for 14 inch height. Eighteen &

Paise Twenty

103 Providing TMT Bars Fe -500D reinforcement for RCC work 327725.00 Kg 76.68 Rs. Seventy

including cutting, bending, binding and placing in position Six & Paise

etc.complete for all floors.(Brand As Approved By GSPHC) Sixty Eight

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

104 Providing & fixing in position ISI marked Rotational 11000.00 Lit 3.91 Rs. Three &

moulded Polyethylene double layer cylindrical vertical Paise Ninety

storage tank (IS : 12701) water tank size inlcuding making One Only

inlet and outlet. Over flow and washout arrangement with

G.I. connection inlcuding using necessary M.H. for

connection etc. complete with closed cover including

applying two coats of oli painting outside the tank

etc.complete.

105 Providing and fixing rolling shutters of approved make made 30.00 Smt 3519.21 Rs. Three

of 80mm wide M.S.laths inter-locked together through their Thousand

entire length and jointed together at the ends by endlocks Five Hundred

mounted on specially designed pipe shaft with bracket Ninteen &

plates, guide channels and arrangements for inside and Paise Twenty

outside locking with push- pull operation complete including One Only

the cost of hood cover and spring. (A) Shutters having

width below 3.5.M.

106 Supplying and filling in foundation and plinth with RUBBLE 4.00 Cmt 1836.84 Rs. One

including filling voids with sand and watering etc.complete. Thousand

Thirty Six &

Paise Eighty

107 Making connection of galvanised Mild steel distribution 1.00 Nos 630.08 Rs. Six

branch with galvanised mild steel main 50mm to 80mm Hundred

nominal bore by providing and fixing tee including cutting Thirty &

and threading the pipes complete. Paise Eight

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

108 Providing & fixing S.W. gully trap without C.I. grating brick 3.00 Nos 1176.94 Rs. One

masonary chamber & water tight C.I. Cover of size 300 mm Thousand

x 300mm size with standard weight (1) square mouth trap One Hundred

150mm x 100mm size "P" or "R" type. Seventy Six

Ninety Four

109 Constructing brick masonry chamber for under ground C.I. 21.00 Nos 3793.18 Rs. Three

inspection chamber and bends with brick having crushing Thousand

strength not less than 35 kg./cm2 in C.M. 1.5 R.C.C. top Seven

slab with 1:2:4 mix (1 Cement : 2 coarse sand :4 graded Hundred

stone aggregate 20mm size) with 8 mm dia steel at 15 Ninety Three

cm,C/C and providing & Fixing R.C.C cover size cover & Paise

0.60x0.45x0.07 met with 40x40x5 mm angle.frame and Eighteen

foundation concrete 1:5:10 inside plaster 15mm thick with Only

cement mortar 1:3 finished smooth with a floating coat of

neat cment walls & bed connect etc. complete rate inclusive

of outside plaster of 15mm thick in cm 1:3 form top of

chamber and all side up to 45 cm deep below ground

level.(A) Inside dimansions 455mmx610mm.and 450 mm

deep for Single or multi purpose pipe line.

110 Extra over above Item no 109 for additional depth 0.10 mt. 34.00 Nos 239.99 Rs. Two

Or part there of beyond 450 mm depth for brick masonary Hundred

chamber for 455m x 610mm size. Thirty Nine &

Paise Ninety

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

111 Constructing brick masonary chamber for underground 6.00 Nos 5476.93 Rs. Five

C.I.Inspection chamber and bends with bricks having Thousand

crushing strength not less than 35 kg/Cm2 in C.M.1:5 Four

R.C.C. top slab with 1:2:4 mix (1-cement:2-coarse sand:4- Hundred

graded aggregate 20mm size ) with 8mm dia TMT steel at Seventy Six

15 cm c/c both ways and providing and fixing precast & Paise

R.C.C.Cover size 0.60 x 0.45 x 0.07m with M.S. angle Ninety Three

frame. of 40 x 40 x 5mm foundation concrete 1:5:10 inside Only

plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed

concrete etc.complete rate are also inclusive of outside

plaster 15mm thick in C.M.1:3 from top of chamber and all

side upto 15cm deep below ground level.

(i) Inside dimention 600mm x 850mm and 450mm deep for

multy perposed pipe line.

112 Extra over above Item for additional depth 0.10 mt. Or part 18.00 Nos 322.37 Rs. Three

there of beyond 450 mm depth for brick masonary chamber Hundred

for 600mm x 850mm size. Twenty Two

Thirty Seven

113 Providing, supplying and Fixing Corrugated DWC HDPE 5.00 Rmt 229.00 Rs. Two

Pipes of Class SN8 Structured Wall polyethelene Piping Hundred

systems (Pipe with online/offline coupler and elastomeric Twenty Nine

sealing ring) with non-smooth External Annular Corrugated Only

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (100mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated .....

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

......& Smooth Internal surface) Polyethylene Piping and 0.00

fittings with the help of coupler ( on line / off line ) attached

with one end of pipes, sliding over the elastomeric sealing

rubber ring placed on the specified valley of the corrugation

at the spigot end, lowering the same into the trench, laying

on the lower bedding (constructed at bottom of trenches) at

prescribed gradient,depth & alignment ,testing the water

tightness of the joints, ensuring the continuity tests of

specified pipe segments etc. complete as per

drawing,specifications & detailed engineering, including

carriage of pipes & fittings from site stacks to the place of

laying etc. as per direction of Engineer-in-charge PipeAs

Per approved Material List By G.S.P.H.C .

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

114 Providing, supplying and Fixing Corrugated DWC HDPE 90.00 Rmt 396.00 Rs. Three

Pipes of Class SN8 Structured Wall polyethelene Piping Hundred

systems (Pipe with online/offline coupler and elastomeric Ninety Six

sealing ring) with non-smooth External Annular Corrugated Only

and Smooth Internal Surfaces (Double Wall) for non-

pressure underground Sewerage & Drainage application as

per EN:13476-3 including all local and central taxes,

transportation, freight charges, octroi, inspection charges,

loading, unloading, conveyance to the departmental stores

etc. complete. (150mm ID Dia) Including Lowering, laying

and jointing of class SN 8 structured wall ( External Annular

Corrugated & Smooth Internal surface) Polyethylene Piping

and fittings with the help of coupler ( on line / off line )

attached with one end of pipes, sliding over the elastomeric

sealing rubber ring placed on the specified valley of the

corrugation at the spigot end, lowering the same into the

trench, laying on the lower bedding (constructed at bottom

of trenches) at prescribed gradient,depth & alin the RO

plant and date of service, TDS of water, discharge of water

etc. shall be written on this.Agency has to receive certificate

from beneficiary every year and submit at the time of

releasing SD. For 25 ltr RO planto maintenance as per

terms & condition alternate in tender. Refilling Hydrauli

115 Providingand laying Two level or slopes) and jointing 429.00 Rmt 356.28 Rs. Three

reiforced concrete light duty, non pressure pipes I.S.Class Hundred Fifty

NP-2 of the following diameter with collars and butt ends Six & Paise

prepared for collar joints, including testing of pipes and Twenty Eight

joints etc. complete. (E) 250 mm. Dia. Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

116 Honey comb Masonary With Having common burnt clay 11.00 Cmt 2795.49 Rs. Two

building brick having crushing strenth not less than 35 kg/sq Thousand

cm in cement mortar 1:6(1 cement : 6 sand)curing etc Seven

.complete in foundation & plinth. Hundred

Ninety Five &

Paise Forty

117 PROVIDING & FILLING SOAKWELL WITH BRICK BAT OF 16.00 Cmt 473.51 Rs. Four

75 MM NOMINAL SIZE etc. complete as per drg and Hundred

specification etc complete. Seventy

Paise Fifty

118 Providing & fixing Precast RCC cover for IC and MH 2.00 nos 1702.00 Rs. One

chambers including MS angle frame of 40x40x5mm and CC Thousand

1:1.5:3 precast RCC cover including 8mm dia. TMT steel at Seven

15 CM c/c both ways and oil painting to frame and handle Hundred Two

including finishing of concrete with CM (1:3) etc complete. Only

Rates are inclusive of cost of angle frame, TMT steel,

reinforcement, concrete finishing work and two pieces of

MS flate 25x3mm handle finished dimention of RCC cover

shall be 0.60 X 0.45 X 0.07 Mt.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

119 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1- 12.00 Nos 16193.97 Rs. Sixteen

cement :2-coarse sand : 4-graded stone aggregate 20mm Thousand

nominal size) foundation concrete 1:3:6 mix (1-cement : 3- One Hundred

coarse sand :6-Brick bats 40 + 50mm size) inside plastering Ninety Three

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse & Paise

sand) finished with a floating coat of neat cement and Ninety Seven

making channels in cement concrete 1:2:4 mix (1-Cement Only

:2- Coarse sand :4-stone aggregate 20mm nominal size)

finished smooth complete including curing and festing (i)

Inside size 900mm x 1200mm and 1.5M. deep including

C.I. cover with frame size 560mm diameter total weight of

cover and frame to be not less than 128 kgs. (Wt. of cover

64 Kg. and Wt. of frame 64 Kg.)(A) With 230mm thick walls

of brick msonry using brick having crushing strength not

less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1- Cement:

5-Coarse sand) (2) B type depth 1.50 Metre for 150mm

diameter sewer.

120 (II) Extra rate for constructing B.B. masonry for every 35.00 Nos 393.26 Rs. Three

additional depth of 0.1M. GR Part thereof over item Hundred

No.24.27 (I) for depth from 1.50M. to 2.25M. Ninety Three

Twenty Six

121 Providing and fixing pre-cast concrete kerb stone of gray 1020.00 Rmt 371.21 Rs. Three

cement based concrete block 30cm length,30cm height and Hundred

15cm thick of M-250 grade concret as per approved design Seventy One

and including excavation for fixing in proper line and & Paise

level,filling the joint with C:M 1:3 (1cement:3fine sand) Twenty One

etccomplete. Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

122 Providing and Fixing Precast Rubber Dye Interlocking 1125.00 Smt 699.90 Rs. Six

Concrete block 60mm thick with grade of concrete M300 Hundred

Puumatic compressed by Mechanically pressed and as per Ninety Nine

approved design including 75mm Sand layer for levelling & Paise

and filling the joint with Sand in proper line and level etc. Ninety Only

123 Providing and laying controlled cement concrete M-300 21.00 Cmt 4837.23 Rs. Four

and curing complete including cost of form work and Thousand

excluding the cost of reinforcement for reinforced Eight

concrete work in foundation footing base of columns and Hundred

mass concrete. Rates are inclusive of providing and mixing Thirty Seven

plastisizer of approved make in proportion as prescribed by & Paise

manufactures. Twenty

Three Only

124 Providing and laying controlled cement concrete M-300 37.00 Cmt 8158.46 Rs. Eight

including finishing smooth with curing complete Thousand

including cost of formwork but excluding cost of One Hundred

reinforcement in vertical & horizontal WALL having any Fifty Eight &

thickness for FOR ANY HEIGHT .Rates Are Inclusive Of Paise Forty

Providing & Mixing Plastisizer Of Approved Make & In Six Only

Proportion As per mix design.Fins For Sump

125 Providing and laying controlled cement concrete M-300 14.00 Cmt 7898.25 Rs. Seven

and finishing smooth with curing etc.complete including Thousand

cost of formwork and excluding the cost of reinforcement for Eight

R.C.C.work in slab having thickness of 13cm. to 15cm. for Hundred

Ground Floor. Rates are inclusive of providing and mixing Ninety Eight

plastisizer of approved make in proportion as prescribed by & Paise

manufactures. Including the cost of form work of plywood Twenty Five

only with fair finish & proping must be of steel only so as to Only

give a fair finish but excluding cost of the reinforcement.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

126 Providing and laying controlled cement concrete M-300 2.00 Cmt 9207.42 Rs. Nine

and finishing smooth with curing etc.complete including Thousand

cost of formwork and excluding the cost of reinforcement for Two Hundred

Plinth BEAMS having any cross sectional area. Rates are Seven &

inclusive of providing and mixing plastisizer of approved Paise Forty

make in proportion as prescribed by manufactures. Two Only

Including the cost of form work of plywood only with fair

finish & proping must be of steel only so as to give a fair

finish but excluding cost of the reinforcement.

127 Providing and laying controlled cement concrete M-300 and 5.00 Cmt 10936.10 Rs. Ten

finishing smooth with curing etc.complete including the cost Thousand

of form work but excluding the cost of reinforcement for Nine

R.C.C. work in COLUMNS for any cross sectional area at Hundred

GROUND FLOOR. Rates are inclusive of providing and Thirty Six &

mixing plastisizer of approved make in proportion as Paise Ten

prescribed by manufactures. Including the cost of form work Only

of plywood only with fair finish & proping must be of steel

only so as to give a fair finish but excluding cost of the

reinforcement.

128 Providing and laying controlled cement concrete M-250 5.00 Cmt 8162.57 Rs. Eight

and finishing smooth with curing etc.complete including Thousand

cost of formwork and excluding the cost of reinforcement for One Hundred

R.C.C.work in slab having thickness of 10cm. and up to Sixty Two &

13cm. for Ground Floor. Rates are inclusive of providing Paise Fifty

and mixing plastisizer of approved make in proportion as Seven Only

prescribed by manufactures. Including the cost of form work

of plywood only with fair finish & proping must be of steel

only so as to give a fair finish but excluding cost of the

reinforcement.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

129 Providing and laying 25mm thick DOUBLE DIAMOND 30.00 Smt 1108.30 Rs. One

POLISHED KOTA STONE SLAB FLOORING over 20mm Thousand

average thick base of cement mortar 1:6 ( 1 cement : 6 One Hundred

coarse sand) laid over & jointed with grey cement slurry Eight & Paise

including rubbing & polishing etc. Complete for all floor all Thirty Only

Kota stone edge shall be hand cut & Machine Cut Shall not

130 Providing and fixing cast iron steps of size 500mm x 24.00 no 170.34 Rs. One

150mm x 22.5mm and painting with two coats of Anti- Hundred

corrosive paint etc. complete. Seventy &

Paise Thirty

131 Providing and fixing Water tight constuction or expansion 174.00 Rmt 150.00 Rs. One

joints of 150 mm dia wide incl necessary fiting.as per Hundred Fifty

drawing & specification. Only

132 Box cutting the road surface to proper slope and camber for 3920.00 Cmt 108.16 Rs. One

making a base for road work including removing ther Hundred

excavated stuff and disposing as on the road side slope Eight & Paise

directed upto 50Mt. lead Sixteen Only

133 Rolling and Consolidation water bound macadam including 30720.00 Smt 16.38 Rs. Sixteen

watering not exceeding 150 mm thickness ( Main layers & Paise

including binding materials) including filling in depressions Thirty Eight

which occurs during the process ( B) with power roller Only

exceeding 8 tones and not exceeding 12 tones.

134 Providing,Laying and Fixing 25mm thick expansion joint by 52.00 Rmt 738.13 Rs. Seven

hydro cell semi-rigid UV resistance with high high Hundred

performance laminated closed cell polythene foam joint filler Thirty Eight &

in sheet foam as directed etc. complete Paise

Thirteen Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

135 Providing & Fixing 25mm dia TMT Fe-500 with PVC pipe 73.00 nos 795.27 Rs. Seven

with Pipe plug/Cap of 40mm. Hundred

Ninety Five &

Paise Twenty

Seven Only

136 Providing and laying controlled cement concrete M-300 and 1483.00 Cmt 4676.32 Rs. Four

curing complete, including the cost of from work and Thousand

excluding the cost of reinfor cement for foundation and Six Hundred

plinth Trimix Road surface, Including plastizer etc Seventy Six

Thirty Two

137 Providing & Making cutting the road surface with machine 1770.00 Rmt 36.80 Rs. Thirty Six

cutter. & Paise

Eighty Only

138 Supplying Granular sub base with Coarse Graded 1640.00 Cmt 1615.33 Rs. One

Material (table -400-2) construction Of Granular sub base Thousand

by Providing coarse graded material , spreading in unifrom Six Hundred

layers with motor grader on prepared surface, mixing by mix Fifteen &

in place method with rotavator at OMC and compacting with Paise Thirty

vibratory roller to achieve the desired density complete for Three Only

grade material

139 Supplying of Graded hand Broken stone aggregate for 2260.00 Cmt 1397.70 Rs. One

WBM Road of size 40mm to 63mm including conveyance Thousand

charges for any lead and lift. Three

Ninety Seven

Seventy Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

140 Spreading of graded hand broken stone aggregate for 2260.00 Cmt 266.26 Rs. Two

Soiling WBM road of size 40 mm to 63 mm. Hundred

Sixty Six &

Paise Twenty

141 Supplying of murram for binding material on WBM road of 680.00 Cmt 275.56 Rs. Two

including conveyance charges for any lead and lift. Hundred

Seventy Five

& Paise Fifty

142 Spreading blindage or road crust filling the gaps in metal 680.00 Cmt 157.44 Rs. One

and levelling to gradient & Camber as directed.(i) Murrum Hundred Fifty

Paise Forty

143 Supplying and fixing reinforced concrete heavy duty non- 50.00 Cmt 2162.68 Rs. Two

pressure pipes with collars for culverts including setting and Thousand

joining the pipes in C.M.1:2 watering and laying (to level or One Hundred

slope)of I.S class NP2 of following internal Sixty Two &

diameters.(V)900 mm dia Paise Sixty

Eight Only

144 Providing Premoulded moulded Asphalt filler joints as 709.00 Rmt 696.56 Rs. Six

drawings (A) 12 mm Hundred

Ninety Six &

Paise Fifty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

145 providing and corrogulated JSW pre coated sheet roofing 145.00 Smt 1022.75 Rs. Three

fixed withh galvanised iron J or L hooks, bolts and Nuts 8 Hundred Fifty

mm dia with bitumin and G.I. Limpet washer or G.I. limpet Five & Paise

washer with white lead complete excluding the cost of Ten Only

Purlines , rafters and trusses(0.60mm thick)

146 300.00 Rmt 568.00 Rs. Five

Drilling of 250 mm dia pilot bore hole in all strata by using Hundred

mud-flush direct rotary ring by using Bentonite powder. Sixty Eight

147 Reaming 250 mm dia pilot bore to 450 mm. dia hole 250.00 Rmt 262.00 Rs. Two

including Assembling, Lowering Housing, Casing strainer Hundred

pipe, gravel packing etc.completed. From 200 mm dia to Sixty Two

450 mm dia bore hole. Only

148 Conduction electrologing test of 300 mm dia. Bore hole incl. 1.00 JOB 18000.00 Rs. Eighteen

carting & idle-hour Thousand

149 (A) Development of each water bearing zones comes/ 1.00 JOB 26922.00 Rs. Twenty

across upto the full depth of tube well ( size 200/250/300 Six

mm dia. depth more than 186 meter ) by lowuring 100 mm Thousand

dia drop line & 32 mm dia G.I. Ariline for each zone with Nine

suitable capacity air compressor upto the availability of Hundred

sand free discharge ( Without air comp. charge) Twenty Two

150 (B) Development of above mentioned bore by air 6.00 Hrs. 8415.00 Rs. Eight

compressor 900 cfm./ 200 psi. capacity upto 6 hrs Thousand

minimum until sand free discharge of the above which ever Four

is latter. Hundred

Fifteen Only

151 M.S E.R.W plain end medium duty pipe confirming to I.s- 180.00 Rmt 2407.00 Rs. Two

4270/2001 with latest amenments in random length of 4 to Thousand

7 mt.as per GWSSB R/C (A)200MM DIA(min 6mm Four

thick)TATA OR JINDAL MAKE Hundred

Seven Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

152 Manufacture, supply and delivery of Cage type trapezoidal 72.00 Rmt 1666.00 Rs. One

shape ("V"') wire wound low carbon, galvanized screen pipe Thousand

and stainless steel screen pipes, confirming to IS: 8110. Six Hundred

(B)200mm dia grade regular (1) 1.00 mm slot size Sixty Six

153 Supply of Gravel having size 4 mm to 6 mm size. 19.00 Cmt 2029.00 Rs. Two

Twenty Nine

154 Supply of clay ball made from sticky clay of size 15 mm to 19.00 Cmt 751.00 Rs. Seven

25 mm & quality certified by Hydrologist. Hundred Fifty

155 Bore plug having 100mm height made from M.S . Plate with 1.00 NOS 1054.48 Rs. One

3 holes at equal distance on circumference for nut-bolts& Thousand

lock nuts of std. make complete .from 5 thick m.s plate (for Fifty Four &

top also) suitable for 200mm dia pipe. Paise Forty

Eight Only

156 Supply of portland cement 1.00 M.T 6302.00 Rs. Six

Hundred Two

157 Cement sealing as recommended by Hydrologist ( without 1.00 Job 13273.00 Rs. Thirteen

cost of cement & by means mud pump ) Thousand

Two Hundred

Three Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

158 Providing and laying Controlled cement concrete M-250 and 1570.00 Cmt 9881.71 Rs. Nine

finishing smooth with curing etc.. complete Including the Thousand

cost of form work of plywood only with fair finish & proping Eight

must be of steel only so as to give a fair finish but exculding Hundred

the cost of reinforcement for R.C.C Wall For Any Height. . Eighty One &

Rate are also inclusive of providing and mixing Plasticizer of Paise

approved make in proportion as Per Mix Design. Seventy One

159 Providing & fixing 600mm dia loop hot dip galvanised iron 3100.00 Rmt 632.00 Rs. Six

concertina coil made out of 2.5mm dia wire with 22mm long Hundred

razor sharp barbs at 35mm centre fitted on 40mm x 40mm Thirty Two

x 5mm M.S angle post of required shape & size at 3.00 mtr Only

centre distance concertina coil shall be fixed on M.S angle

stand with the help of 4 nos RBT wire M.S angle stand shall

be fixed on top of compound wall with 15m x .15mx.4m

deep block in controlled cement concreate M-200. Rate is

inclusive of applying one coat of primer and 3 coats oil

painting on M.S. angle stand shall be made as per the

drawing supplied or as directed by engineer In Charge.

160 Demolition of Brick work and stone masonry including 1720.50 Cmt 572.20 Rs. Five

stacking of serviceable materilas and disposal of Hundred

unserviceable materials with all lead and lift. (i) In Lime Seventy Two

Mortar. & Paise

Twenty Only

161 Supplying, assembling, lowering and fixing in vertical 35.00 Rmt 1472.00 Rs. One

position in bore well, unplasticized PVC medium well casing Thousand

(CM) pipe of required dia, conforming to IS: 12818, Four

including required hire and labour charges, fittings & Hundred

accessories etc. all complete, for all depths, as per direction Seventy Two

of Engineer -in-charge. pipe size : 200 mm Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

162 Providing &Fixing 200mm dia MS plate cap with 1.00 No 1280.00 Rs. One

Two Hundred

Eighty Only

163 Providing and fixing factory made precast RCC perforated 1.00 No 1154.40 Rs. One

drain covers, having concrete of strength not less than M- Thousand

25, of size 1000 x 450x50 mm, reinforced with 8 mm dia One Hundred

four nos longitudinal & 9 nos cross sectional T.M.T. hoop Fifty Four &

bars, including providing 50 mm dia perforations @ 100 to Paise Forty

125 mm c/c, including providing edge binding with M.S. flats Only

of size 50 mm x 1.6 mm complete, all as per direction of

Engineerin-charge.

164 Providing and laying (To level or slopes) and jointing 170.00 Rmt 671.31 Rs. Six

reinforced concrete light duty, Non-pressure pipes I.S. class Hundred

NP/2 of the following internal diameter with collars and butt Seventy One

ends prepared for collar joints including testing of units & Paise

complete. (d) 300 mm dia. Thirty One

165 Providing, laying, testing and commissioning of 'C' class 170.00 Rmt 3606.90 Rs. Three

heavy duty MS pipe confirming to IS 3589/IS 1239 including Thousand

welding, fittings like elbows, tees, flanges, tappers, nuts, Six Hundred

bolts, gaskets etc and fixing the pipes on wall/ceiling with Six & Paise

suitable clamps/support frame and painting with 2 or more Ninety Only

coats of synthetic enamle paint of required shade complete

as required. The work includes makingholes in brick or RCC

walls, slabs/ roofs and making good the damages by

bringing to the original condition to the satisfaction of the

Engineer in charge, painting two coats of approved shade

(Post office red) of enamelpaint over a coat of approved

primer.150 mm dia pipe(6.3 mm thk )

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

166 Providing, laying, testing and commissioning of 'C' class 10.00 Rmt 2581.50 Rs. Two

heavy duty MS pipe confirming to IS 3589/IS 1239 including Thousand

welding, fittings like elbows, tees, flanges, tappers, nuts, Five Hundred

bolts, gaskets etc and fixing the pipes on wall/ceiling with Eighty One &

suitable clamps/support frame and painting with 2 or more Paise Fifty

coats of synthetic enamle paint of required shade complete Only

as required. The work includes makingholes in brick or RCC

walls, slabs/ roofs and making good the damages by

bringing to the original condition to the satisfaction of the

Engineer in charge, painting two coats of approved shade

(Post office red) of enamelpaint over a coat of approved

primer.100 mm dia pipe(6.3 mm thk )

167 Supply and installation,testing and commisioning of 1.00 Nos 6101.15 Rs. Six

Butterfly valves of PN 1.6 ratings with bronze/gunmetal seat Thousand

duly ISI marked complete with nuts, bolts, washers, gaskets One Hundred

confirming to IS 13095 of following sizes as required:100 One & Paise

mm dia Fifteen Only

168 7.00 Nos 9945.68 Rs. Nine

Providing, installing testing & commissioning of non-return Hundred

valve of following sizes confirming to IS 5312 complete with Forty Five &

rubber gasket, GI bolts, nuts, washers etc. as required. Paise Sixty

100mm Eight Only

169 Providing and fixing Single headed internal hydrant having 5.00 Set 6139.00 Rs. Six

outlet of 63 mm dia(2.1/2”) N.B. hydrant with cast iron Thousand

wheel ISI marked confirming to IS 5290 (type A) with SS One Hundred

cap and chain as required Thirty Nine

Single headed stainless steel Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

170 Providing and fixing of 63 mm Stainless Steel (Grade 304) 5.00 Nos 6886.72 Rs. Six

branch pipe nozzle conforming to IS 903, suitable for Thousand

instantaneous connections to hose coupling etc. as Eight

required 25 mm Hundred

Eighty Six &

Seventy Two

171 Providing & fixing 63mm dia 15 m long RRL hose pipe 3.00 Set 3916.23 Rs. Three

with 63mm dia male and femal couplings duly bound with Thousand

GI wires, revates etc. confirming to IS 636 (typa-A) as Nine

required Stainless steel (grade 304) Hundred

Paise Twenty

Three Only

172 Fire hose cabinet (600*450*250)mm providing fixing testing 4.00 Nos 3453.00 Rs. Three

and commissioning weathere proof standard fire hose Thousand

cabinet stand mounting type having single opening with M S Four

fabricates stand cabinet make with 18 gayge ms sheet Hundred Fifty

necessary locking. Rates are inclusive of material ,labour Three Only

173 Supplying and fixing first-aid Hose Reel with MS 4.00 Nos 7920.84 Rs. Seven

construction spray painted in post office red, confirming to Thousand

IS 884 complete with the following as required. 25 mm Nine

nominal int. dia. Water hose thermoplastic (Textile Hundred

reinforced) type-2 as per IS12585 25 mm nominal internal Twenty &

dia gun metal globe valve and nozzle. Drum and brackets Paise Eighty

for fixing the equipment of the wall. Connections from risers Four Only

with 32 mm dia stop gun metal valve & MS pipe and socket.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

174 Providing and fixing 25mm dia Gun metal ISI Gate Valve 4.00 Nos 608.08 Rs. Six

including necessary fittings. Hundred

Eight & Paise

Eight Only

175 Supplying and fixing 4 way Fire Brigade service inlet 4.00 Nos 12435.20 Rs. Twelve

connection of CI body with gun metal instantanoeus male Thousand

inlet coupling complete with chain & cap as required for Four

suitable MS pipe (150 mm) connection conforming to IS Hundred

904 as required Thirty Five &

Paise Twenty

176 Design Supply And Instolattion of Safty Signegs made of 900.00 Sq.Inch 7.95 Rs. Seven &

Zinc Sulfied base glow in the Dark Rigid Sheet with High Paise Ninety

luminiues Properties Inclusing Trasperntwhether Proof U/V Five Only

Stabilized Platic Pasted on 2mm,3mm thick Clear Acylic

Sheet Emergengy Exite Do Not Use Lift in -case of Fire

bFloor Marking Fir Lift Stair Exite Fire Hydramt Point Fire

Extinguisher Fir Aelaram, Call etc.

177 Getting provisional NOC and Final NOC and Renewal of 1.00 Job 16950.00 Rs. Sixteen

NOC (During Defect Liability Period) for Fire Thousand

Hydrant,Sprinkler system, Fire Extinguisher, Fire alarm Nine

system etc. from local fire authority or any other relevant Hundred Fifty

statutory authority at initial stage and required various other Only

stages of construction work, including preparation of

reports/drawings as per fire authority requirement. Rate

also includes renewal of Fire NOC during defectliability

period as per requirement. Main agency has to give

demonstration of all fire system to fire officer police /

concern beneficiaries & GSPHCL.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Agencyhas to submit FDR of approved bank as per clause 0.00

2.0, section 3, of Rs 20000.00 Or Quoted rate which ever is

higher to GSPHCL for minimum maturitperiod of Four

yearsin favour of GSPHC, which will be released after

Successful Submitting of All Fire NOC

atthecompletionofdefectliabilityperiod.Renewal FireN.O.C.

shall be submitted final S.D.proposal.Agency hasto

bornechargeslikepreparingandsubmissionofallthedocument

s,Photographs,CD/DVDrequired togetthe N.O.C. from

concern fire department and also liaisoning work with

concern departments. Main civil agency has to get the pre-

NOC from fire & emergency department well beforestarting

civil & the fire hydrant work including sump & pumproom

work. For that professional & experience fire agency has to

prepare drawing of fire hydrant system, sprinkler system,

fire alarm system, DGset etc. as per tender item and

making floor layout of all fire pump panel, cable earthing etc

in pump room. If any changes required in drawings of sump

& pump room.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Main agency has to inform in written before excavation of 0.00

pump & sump room. Agency has to calculate the total head

& discharge required as per NBC/local fire office

requirement and as per sitesituation and submit fire pump

OEM specification curve foundation detail etc & get

approval of cable, panel drawings & specification. After

completion of fire hydraunt related work as per pre-NOC,

tender specification & drawing approved by fire department,

agency has to do site visit with fire department & give the

testing & demonstration to fire officer & get the final NOC

before handing over of the building. Agency has to give live

testing & demonstration of all system to GSPHCL & police

department jointly. For fire NOC fee separate item is taken

in tender. Agency has to quote the rate as per latest

Gazettein respective tender item.

178 Supplying and Application of Fire retardant Primer (Base 30.00 Smt 11740.27 Rs. Eleven

coat) on existing steel and other metal surfaces(metal doors) Thousand

including preparation of the surface by thoroughly cleaning, Seven

oiling,removing dirt and foreign matters and scoured with Hundred

brushes fine steel wood ,scrapers and sand paper for Forty & Paise

enhancing metal surface protection against thermal and fire Twenty

exposure and Supplying and Application of Fire retardant Seven Only

Paint (Top coat) on existing steel and other metal surfaces

(metal doors) including labour and all equipments ensuring

protection against thermal and fire exposure.The Paint is

engineered to withstand fire for upto 2 hours as per NBC

Guideline.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

179 Providing and Laying of Fire Stop Mortar Seal( Fire Barrier) 7.00 Smt 14088.98 Rs. Fourteen

for Fire Penetration Sealing System in floor openings for Thousand

vertical shafts & wall opening.The mortar seal shall have Eighty Eight

minimum 2 hours fire resistance . FIRE BARRIER (DUCT) & Paise

(AMEETUFF ) L1 Ninety Eight

180 12.00 Nos 503.01 Rs. Five

Providing, fixing, testing & commissioning of 15mm dia quartzoid Hundred

bulb type sprinklers of rating 57 degree centigrade with required Three &

accessories. Paise One

181 3.00 Nos 453.00 Rs. Four

Carry Out RCC Core Cutting up to 200 dia. And Thick

Hundred Fifty

Wall/Beam/Slab with Providing PVC Pipe of 3mm thick inside

and Necessary Finishing on Both End of Wall.

Three Only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & Erecting Point wiring with 1.1 KV grade ISI marked 2 X 1.5 sq. 295.00 Point 605.00 RS: Six

mm copper PVC insulted FRLS-H wire with 1.5 sq. mm (green) copper PVC Hundred Five

insulated FRLS-H wire for earth continuity in FIA approved ISI mark medium only

class white colour 20/25 mm dia. embossed rigid PVC pipe with PVC fitting

fixed with adhesive solution erected on/in Brick Wall / slab along with

continuous G.I. fish wire to draw wires and laid in approved manner zari for

PVC pipe and boxes shall be filled with cement mortar and finishing the

surface to match the wall / ceiling complete with approved make 5/6 Amp. ISI

mark modular type switch and accessories mounted in 20 G. G.I. company

fabricated metallic box covered with appropriate front plate modules erected

flushed with wall / ceiling with necessary modular lamp holder / modular

ceiling rose / HD Connector 75 mm deep GI box as per requirement ( make &

model approved by EIC and matching colour with switches accessories) as

directed for concealed wiring. Light point. Cat.-III.(Conductor resistance

should be as per IS:8130/1984 ) Necessary sheet cover must be erected on all

182A box to prevent mortar going into the box.& for ceiling light Point use deep

Junction box of same PVC Pipe make . Length of point wiring must not increase

than 10 mtr. For that necessary switch boards and their locations must be

finalised before execution by agency otherwise payment will not be done for

extra long point. (For future extention, if required, agency has to erect one

higher size metal box and modular plate as per instruction of EIC. Cost of blank

plate shall be paid as per tender item) [Wire must be having box packing][This

item include cleaning(inside/outside) of all GI switch boards,electric point

box,fan box & box cutting plaster arround modular plate without any gap]

(Light Point Cat-III)

For Bell Point cat-III 10.00 Point 605.00 RS: Six

182B Hundred Five

For secondary light point , Cat-III 40.00 Point 208.00 RS: Two

182C Hundred Eight

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For Fan Point (with 6 A. Modular type switch and two module hum free 95.00 Point 842.00 RS: Eight

EME Rotary Five step type electronic fan regulator both having ISI Hundred Forty

mark) Cat.-III Two only

For separate Point (with 6 Amp. Switch & 3/5 pin socket both having 40.00 Point 636.00 RS: Six

ISI mark) Cat.-III Hundred Thirty

For Looped on switch board (with 6 Amp. Switch & 3/5 pin socket both 100.00 Point 306.00 RS: Three

182F having ISI mark) Cat.-III Hundred

Providing and erecting Medium Class FIA approved and ISI mark white 500.00 Mtr. 24.00 RS:

colour (embossed) RIGID PVC PIPES of following size complete erected Twenty Four

with necessary PVC fittings & Junction boxes fixed with adhesive only

183A solution & clamps on / in wall / ceiling along with continuous fish wire

to draw mains with necessary fittings and junction boxes for following

dia. 20 mm. dia.

For 25 mm dia. 250.00 Mtr. 33.00 RS: Thirty

183B Three only

For 32 mm dia. 100.00 Mtr. 54.00 RS: Fifty

Four only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & Erecting Mains with approved make FRLS-H PVC Insulated 1600.00 Mtr. 81.00 RS: Eighty

wire ISI marked 1.1 KV grade with FIA approved ISI mark medium One only

class 20/25/32 mm dia. embossed rigid PVC pipe with same company

PVC fitting fixed with adhesive solution to be erected on/in brick wall /

slab along with continuous G. I. fish wire to draw mains Zari work &

plastering by cement mortar & finishing the surface to match the wall /

184A ceiling complete (Conductor resistance should be as per IS:8130/1984

) [a] 2 x 1.5 sq.mm. FRLS-H copper multi stranded conductor mains

with 1.5 sq.mm. FRLS-H copper multi stranded conductor for

earthing as per standard colour code. (with 20 mm dia. PVC pipe)

[Wire must be having box packing]

For 2 x 2.5 sq.mm. FRLS-H copper multi stranded conductor mains 600.00 Mtr. 108.00 RS: One

with 1.5 sq.mm. FRLS-H copper multi stranded conductor for earthing Hundred Eight

as per standard colour code. (with 20/25 mm dia. PVC pipe as per only

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

For 2 x 4.0 sq.mm. FRLS-Hcopper multi stranded conductor mains with 200.00 Mtr. 145.00 RS: One

2.5 sq.mm. FRLS-H copper multi stranded conductor for earthing as Hundred Forty

per standard colour code. (with 20/25 mm dia. PVC pipe as per Five only

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

For 2 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains 220.00 Mtr. 192.00 RS: One

with 2.5 sq.mm. FRLS-H copper multi stranded conductor for earthing Hundred Ninty

as per standard colour code. (with 25 mm dia. PVC pipe as per Two only

requirement) [Wire must be having box packing] (Conductor

resistance should be as per IS:8130/1984 )

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For 4 x 6.0 sq.mm. FRLS-H copper multi stranded conductor mains with 250.00 Mtr 339.00 RS: Three

2.5 sq.mm. FRLS-H copper multi stranded conductor for earthing as Hundred Thirty

184E per standard colour code. (with 25/32 mm dia. PVC pipe as per Nine only

requirement) (Conductor resistance should be as per IS:8130/1984 )

Providing & fixing 20mm. dia. PVC insulated G.I. corrugated Flexible 50.00 Mtr. 31.00 RS: Thirty

185 pipe with necessary socket, PVC bushes saddle, Check-nuts etc. One only

complete of following sizes.

Providing & fixing 25 mm. dia. PVC insulated G.I. corrugated Flexible 50.00 Mtr. 37.00 RS: Thirty

186 pipe with necessary socket, PVC bushes saddle, Check-nuts etc. Seven only

complete of following sizes.

Providing and erecting Plug Point wiring with 1.1 KV grade ISI marked 40.00 Point 930.00 RS: Nine

approved make 2 x 2.5 sq.mm copper PVC insulated FRLS-H wire with Hundred Thirty

1.5 sq.mm (green) copper PVC insulated FRLS-H wire for earth only

continuity in FIA approved ISI mark white colour medium class 20/25

mm dia. rigid PVC pipe with same band PVC fitting fixed with adhesive

solution erected in brick wall/slab along with continuous G. I. fish wire

to draw wires and make plaster zari for PVC pipe & boxes shall be

filled with cement mortar & finishing the surface to match the wall /

187 ceiling complete with 16 Amp Modular type Swich and accessories

mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp.

indicator switch & 1 No. 6/16 A universal socket white colour suitable

for 3 pin top duly both having ISI mark. (Necessary Sheet Must Be

Erected On All Box To Prevent Mortor Going In To The Box) Cat.-III.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting Plug Point wiring with approved ISI marked 1.1 22.00 Point 1087.00 RS: One

kv grade 2 x 4.00 sq.mm copper PVC insulated FRLS-H wire with 2.5 Thousand Ten

sq.mm (green) copper PVC insulated FRLS-H wire for earth continuity Hundred Eighty

in FIA approved ISI mark white colour medium class 20/25 mm dia. Seven only

igid PVC pipe with same band PVC fitting fixed with adhesive solution

erected on/in brick wall /slab along with continuous G.I. fish wire to

draw wires and make plaster zari for PVC pipe & boxes shall be filled

with cement mortar & finishing the surface to match the brick wall /

ceiling complete with 16 Amp Modular type Swich and accessories

188 mounted in 20 G. GI company fabricated metallic box covered with

appropriate front plate modules erected flushed with wall. (a) 16 Amp.

indicator switch & 1 No. 16 Amp. universal socket white colour

suitable for 3 pin top duly. Cat.-III (Necessary Sheet Must Be Erected

On All Box To Prevent Mortor Going In To The Box)(AC/Gyser point)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & Erecting 2.0 mtr long Earthing system by making minimum 11.00 Each 6000.00 RS: Six

bore of 225 mm dia in soft soil. Suitable for pipe-in-pipe technology Thousand

earthing.Earth electric rod must be made from Corrosion free Hot dip only

galvanizing pipes having following specification.

(A) Earth Electrode: outerpipe:- minimum 88mm O.D ,'B ' Class ISI

mark of Reputed Brand, Inner pipe:- 42 mm minimum O.D, Pipe B Class

ISI mark reputed Brand Terminal Size: 70mm X 100mm length,

Terminal Should be made from inner pipe for that pipe must be

pressed and give rectangular shape so its work as a terminal.The hot

deep galvanising must be done after above process.Galvanised

thickness must be minimum 75 micron any where. SS Nut bolt:-

no.with washer suitable for 14mm dia. hole must be provided at

terminal. total minimum Weight(approx.) of earth electrodewith inside

conductive material should be 26kg.

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load & dry

form, Sulphar content:- <2%

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

(C) Back fill Compound :-Earthing compound should be capable to

retain moisture for long time Back Filling Compound weight is 25 Kg.

Necessary test report must be submitted.

1. Short circuit test by ERDA/ CPRI for 25KA

2. Resistivity test of conducting material from NABL accredited lab.

3. Hot dip galvanised / zinc coating micro test from reputed

laboratory.

4. General test report from OEM regarding specification of earthing.

{Make & Model to be approved by EIC) OEM has to submit all detail &

sample for approved before supplying } Water must be poured in bore

before starting earthing. Earthing value must be measured with earth

tester. Agency has to bring the earth resistance to at least 02 ohms &

voltage between neutral &Earthingupto 02 volt. Agency has to

maintain earthing& its value for one year. If required. Earthing must be

done in the presence of A.E.(2 Nos Main Building+2 Nos Other Building

+2 nos pump room+1 Nos Security cabine+ 4 Nos DG Get)

Providing and fixing heavy-duty earthing inspection chamber : heavy 11.00 Each 1025.00 RS:

duty PVC/CC/Brick masonary should be size of OneThousand

190 400mmX400mmX400mm depth and Cover should be heavy duty cast Twenty Five

iron with required size of 300mmX300mmX4mm thick. only

For Above Earthing ( 3mtr.) Additional charges for boring in hard rock 11.00 Each 325.00 RS: Three

soil (By Breaker) & filling soft soil in earth pit. (Certificate for soil have Hundred

to given by DEE/AE along with Photographs). Twenty Five

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying & erecting M.S./ G.I metal Box having 16 Gauge painted 1500.00 Sq. Inch 5.94 RS: Five

with red oxide be concealed in wall with necessary plastering & and Paise Ninty

finishing covered with 3mm thick Laminated sheet with grooving as Four only

directed of following depth. 3" Depth

Providing following type of Modular Type Accessories mounted with 250.00 Each 25.00 RS:

20 G company fabricated GI metalic box, single mounting base frame Twenty Five

covered with textured / metallic front plate, modules erected with only

necessary connection. As instructed by Engineer in charge.

For Blank Plate Single. Cat.-III

For Two Pin/RJ-11 Telephone Socket cat-III 20.00 Each 159.00 RS: One

193B Hundred Fifty

Nine only

For Computer RJ-45 socket cat-III 22.00 Each 159.00 RS: One

193C Hundred Fifty

Nine only

For TV Co-axial Socket outlet cat-III 3.00 Each 159.00 RS: One

193D Hundred Fifty

Nine only

For Modular Indicating Call Bell cat-III 8.00 Each 326.00 RS: Three

Twenty Six

For Modular Buzzer cat-III 8.00 Each 148.00 RS: One

Hundred Forty

Eight only

Providing and erecting modular type accessories mounted on 20G G.I. 3.00 Each 629.00 RS: Six

company fabricated galvanised metal box covered with approriate Hundred

194 front plate modules erected flushed with wall/Ceiling with 1 Nos. of 16 Twenty Nine

Amp SP Switch & 3 Nos. of 6 Amp 3/5 pin plug. [For TV Switch board] only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & erecting Switch board for Computer or electric apparatus 22.00 Each 1122.00 RS: One

consisting of following items in single board erected on Metal board Thousand One

erected as directed. 1 no. 6/16 Amp. universal Socket, 1 nos. 16 Amp. Hundred

indicator switch, 3 nos. 6 Amp. Switch & 3 nos. 6 Amp. 5 pin Plug. Twenty Two

For Computer power Supply board. Cat. III only

Providing ad erecting approved make single phase Double Door metal 8.00 Each 6255.00 RS: Six

clad D.B. as per relevant indian standards ammended upto date. Thousand Two

Supplying and fixing following way single phase MCB distrubution Hundred Fifty

board of company fabricated with sheet box with powder coated Five only

inside and outside after apply seven tank chemical process of 1.2mm

thick CRCA sheet cover (Door, Back side & body of MCBDB) complete

with suitable integral single piece construction tinned copper busbar

and link with all necessary interconnection and with necessary size MS

frame for mounting MCBDB.Manufacturer must be provided (1) IP

and as per IS:8623 1 & 3, IEC 61439 1 & 3 having D type PU gasket. (2)

Seven tank Powder coating Certificate (3) Tinned Copper/Brass make

196 neutral & Earthing link with isolation & Protecting Cover for 240 Volts

on surface / recess complete with loose wire box, terminal connectors

for all incoming and outgoing circuits, with suitable size FRLS PVC

insulated copper conductor up to terminal blocks and internal

connection, tinned coppper bus bar, 1 no. tinned copper neutral link,

tinned copper earth bar, din bar, detachable gland plate,

interconnections, powder painted including earthing etc.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Single phase incoming and horizontal single phase outgoing. For 16

Way MCBDB: Including 40 Amp. 30 mA double pole ELCB (ELCB

confirming to IS:12640/1988 having sensitivity of 30 mA and breaking

capacity of 10 KA), MCB 40 Amp. double pole switch (C curve confirms

to IS:8828 having breaking capacity of 10 KA) and S.P. MCB of rating

to 32 Amp. with NL suitable to operate on 240 Volt A.C. power. (6 to

25 Amp 12 Nos.) (The DBs should be used of same company of MCB /

ELCB to be used) (MCBDB must be erected in line & level with spirit

level and finish the external edge with box cutting plaster) (Same

colour MCB(SP/DP) should be used as same as MCBDB) [Including

Necessary numbering / marking on box done with red colour radium

sticker as per site requirement and instructions given by EIC on site.

Font / number size given by EIC on site as per requirement] Single

phase incoming and horizontal single phase outgoing.

Providing ad erecting approved make 8 Way Three phase Double Door 5.00 Each 14281.00 RS: Fourteen

Horizontal / Vertical type (as per site requirement and EIC instruction) Thousand Two

outgoing per phase outgoing type (PPI) metal clad D.B. as per relevant Hundred Eighty

Indian standards amended up to date. Supplying and fixing following One only

way Three phase MCB distribution board with company wire links for

internal connections having colour code and with suitable lugs and

company fabricated with sheet box with powder coated inside and

outside after apply seven tank chemical process of 1.2mm thick CRCA

sheet cover (Door, Back side & body of MCBDB) complete with

suitable integral single piece construction, tinned copper busbar and

link with all necessary interconnection and with necessary size GI

frame (if required for surface type) for mounting MCBDB.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Manufacturer must be provided (1) IP 43 and as per IS:8623 1 & 3, IEC

61439 1 & 3 having D type PU gasket. (2) Seven tank Powder coating

Certificate (3) Tinned Copper/Brass make neutral & Earthing link with

isolation & Protecting Cover for 440 Volts on surface / recess complete

with loose wire box, terminal connectors for all incoming and outgoing

circuits, with suitable size FRLS PVC 10mm2 insulated copper

conductor with Pin type lug up to terminal blocks and internal

connection, tinned copper bus bar, 4 nos. tinned copper neutral link,

nos. tinned copper earth bar, din bar 4 nos., detachable gland plate,

interconnections, including earthing etc. Three phase incoming and

single phase outgoing.Total quantity of wire link: 13 Nos.

For Three phase 8 Way Double Door PPI MCBDB (The DBs should be

used of same company of MCB / ELCB to be used) (MCBDB must be

erected in line & level with spirit level and finish the external edge with

box cutting plaster) (Same colour MCB(SP/DP) should be used as same

as MCBDB) [Including Necessary numbering / marking on box done

with red colour radium sticker as per site requirement and instructions

given by EIC on site. Font / number size given by EIC on site as per

requirement] For 8 Way TPN MCBDB with I/c:- 40Amp FP MCB 10KA,

40A DP ELCB, 30ma,10KA -03 nos & O/G :- 6-32 Amp SP MCB :-

Nos. (For 3phase Distribution if requried)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying and erecting 8 W LED lamps with following wattage capacity 40.00 Each 111.00 RS: One

of 220 to 240 voltage, minimum 15000 burning hours life, 500 V in Hundred Eleven

built surge protection,Polycarbonate diffuser, mounting suitable for only

198 E14 / E27 / B22 lamp holders, pf greater thanequal to 0.5 (A) LED

Lamps integral type, with PC diffuser suitable LAMP holder

Providing and erecting Polycarbonet body surface mounting LED Bulk 12.00 Each 780.00 RS: Seven

head type 9 watt Lighting Fitting with electronic driver having THD less Hundred Eighty

than 15%, CRIgreater than80, P.F.0.95 And lumen output from only

luminaire 720 lm, input voltage range 160 270 V AC, 50 Hz cool white

(3000 to 6500 k), inbuilt driver having efficiency greater thanequal

to80lm/w, 20 deg C to + 60 deg C working temperature, AL frame

with Beam Angle 120 deg.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying and Erecting LED indoor fitting of approximately 4feet long 45.00 Each 370.00 RS: Three

with LED of wattage 0.2W to 0.5W assemble on single MCPCB with Hundred

housing use as a heat sink shall be made from Aluminum extrusion Seventy

having enough strength (sample must be approved by EIC)with only

polycarbonate diffuser with following specification: (A) Company

mark/name on the fitting.(B) Rated input voltage and frequency: 220V

to 240 VAC ; 50Hz.(C) Rated input wattage: max. 24w(D) Rated input

current : 0.2 Amp(E) Power Factor : Min. 0.90(F) ATHD :Max. 15%(G)

Rated Luminous flux: Min. 2420 lm(H) CCT: 6500K(I) CRI: Min. 80Ra(J)

Driver Efficiency: Min. 80%(K) LED life span: Min. 50000 Hrs @ L70(L)

Over Voltage protection: Withstand up to 440V/AC for 4 Hrs.(M) Surge

protection : Min. 2KV(N) IP rating: IP 20(O) IK rating : IK

(P) Short circuit , Open circuit & Reverse Polarity Protection must be

(Q) Fixing clamp min. 12mm wide heavy duty design & strength should

be sufficient to hold the fitting erected on wall or ceiling.& Fitting

length should be min. 1100mm (R) 3 core x 1.0 sqmm copper wire of

with min. 1 ft (300mm) earthing connector, Diffuser shap must be

OMEGA/Mashroom & Al. base must be powder coating.

(Note: The manufacturer/ authorized Channel partner of the

manufacturer has to submit 5 yrs free replacement Guarantee for

complete Fixture)(Model approved by Engineer in Charge subject to

above Specification.)[Approval will be given strictly subject to item

specification]

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

SITC of Indoor Commercial Recess / Surface mounted (IP20) 24 W 180.00 Each 1159.00 RS: One

Cool/Natural white/Warm (6K/4K) white Color back lit LED Down Thousand One

lighter with BIS approved separate potted driver with single piece Hundred Fifty

pressure die cast aluminium alloy housing (no plastic part allowed) Nine only

with corrosion resistant powder coated finish with PMMA/PS/Injection

moulded Polycarbonate diffuser with high brightness LED complete

(LED from Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI

> 80, CCT 6K/4K. The LED's should be mounted on back lit metal core

PCB for better heat conduction and long life of LED. Test report of shall

be submitted (LM 79 for complete fixture, for individual LED). The

Fixture have protection like miswiring, over voltage, over load , IP20

201 wrong wiring, THD < 15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver

efficiency > 85%. For 24 W fixture wide voltage range from 180 V to

270 V, 50/60 HZ @ 240V, 4 KV surge protection.

The fixure must have min. 2400 lumen light output. The fixture should

be provided with external separate Potted driver, latest Valid BIS

approved Luminaire and driver. The Fixture efficiency ≥

lumens/watt only for safety and performance. (L70 @ 50,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports

should be submitted at the time of approval: heat resistant test,

thermal test, Ingress protection test, IK test, Photobiological report

with 3 core X 1.0 Sq.mm. flexible wire as per site requirement [Note:-

The manufacturer / authorized Channel partner of the manufacturer

has to submit 5 yrs. free replacement Guarantee for complete Fixture

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

SITC of Indoor Commercial Recess / Surface mounted (IP20) maximum 40.00 Each 1027.00 RS: One

18 W Cool/Natural white/Warm white Color LED Down lighter office Thousand

Lighting Luminaire with separate potted driver with single piece Twenty Seven

pressure die cast aluminium alloy housing with corrosion resistant only

powder coated finish with PMMA/PS/Injection moulded Polycarbonate

diffuser with high brightness LED complete (LED approx.6K/4K from

Philips Lumileds, CREE, Nichia, Bridgelux, Seoul & Osram) CRI > 80, CCT

5600K (5400 to 5800K bin). The LED's should be mounted on back lit

metal core PCB for better heat conduction and long life of LED. The

Fixture should comply all International Standarad third party (LM

for complete fixture, LM80 for individual LED). The Fixture have

protection like miswiring, over voltage, over load, wrong wiring, THD <

15%,, P.F > 0.95, efficiency ≥ 100 lm/w & driver efficiency > 85%. For

18 W fixture wide voltage range from 180 V to 270 V, 50/60 HZ @

240V application, 4 KV surge protection.

The fixure must have min. 1800 lumen light output.

The fixture should be provided with external separate Potted driver,

latest Valid BIS approved Luminaire and driver. The Fixture efficiency ≥

90 lumens/watt only for safety and performance. (L70 @ 30,000 Hrs.)

The fixture should be able to easily mount on POP / Grid false ceiling.

The Luminiare should be tested as per IP 20 and following test reports

should be submitted at the time of approval: heat resistant test,

thermal test, Ingress protection test, drop test, Photobiological report

with 3 core X 1.0 Sq.mm. flexible wire as per site requirement [Note:-

The manufacturer / authorized Channel partner of the manufacturer

has to submit 5yrs. free replacement Guarantee for complete Fixture

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting max. 10 watt LED battern having main housing 8.00 Each 309.00 RS: Three

aluminium extruded & front cover of polycarbonate. Electrically & Hundred Nine

photomatry parameters are as undr: 240 V, 50 Hz, System wattage 10 only

w ± 10 %, PF ≥ 0.95, system luments min. 1000, CCT- 3000K to 6500K,

CRI ≥ 80, THD ≤ 15%, delivery efficiency ≥ 85%, L80 Certified LED,

30000 hrs. @ L70, Electronic CC driver, insulated copper wire for

internal wiring, IP20, operating voltage: 160 to 270 V, Surge -

203 KV,Fixing clamp min. 12mm wide heavy duty design & strength should

be sufficient to hold the fitting erected on wall or ceiling,Length of

fitting should be min. 600mm, 3 core x 1.0 sqmm copper wire with min

1 ft (300mm) earthing connector,Diffuser shap must be

OMEGA/Mashroom & AI. base must be powder coating.

Supplying and Erecting Of L.E.D. type High bay fixture having Power 3.00 Each 5204.00 RS: Five

Consumption of following watts with, Input Voltage 110 - 290 V.AC Thousand Two

with full efficiency, Power Factor > 0.9 with 50/60 HZ, CCVC LED Driver Hundred Four

used for maximum power saving, Best Quality Aluminium alloy housing only

and aluminium Dome for better heat dissipation, CCT Cool white

204 (6000K), CRI 80, Beam angle > 120 degrees, working temperature -20

deg c to +55 deg c, Body IP 65 For 70 to 90 watts (Make & model

approved by EIC suject to above specification )

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supply, Installation, Testing and Commissioning of 1200mm sweep, 90.00 Each 2603.00 RS: Two

BEE 5 Star rated, Max. 30Watt Ceiling fan with Brush Less Direct Thousand Six

Current (BLDC) permanent ferrite magnet Motor, class of insulation: Hundred Three

B/E, Double ball bearings, Rust free 3 nos.Aluminium blades, 2 nos. only

canopies, shackle kit with earthing provision, copper winding, Power

factor not less than 0.9, Service Value (CMM/W) minimum 7.5, Air

delivery minimum 220 CMM, Minimum 345 RPM,230v (tolerance as

per IS : 374 2019), THD less than 10%, compitible with electronic

regulator unit for Five Speed Control and all remaining accessories

including safety pin, nut bolts, washers, temperature rise equal to

205 degree C (Max.), suitable for 140 to 285 Voltage and rectifier circuit

with surge, over current and overload protection , 50 Hz, Single phase

AC Supply, earthing etc. Complete as required.Down road: up to

mtr as per site requirment.

(A) 1200 mm Sweep (48") ( Make Havells Efficiencia Dx , Bajaj

Energos 28 & Crompton make & model approved by EIC suject to

above specification )

Providing & Erecting Decorative Dig Dong bell Stereo type 250 Volt 2.00 Each 170.00 RS: One

complete erected on existing polished wooden block or in M.S. box Hundred

206 with 3mm thick white ISI mark laminated sheet. (Anchor-Chime Seventy

model,Rider,Vision,GM modular) only

Supplying and erecting Fan hook of 10 mm M.S. round bar bounded to 100.00 Each 125.00 RS: One

the RCC bars up to 50 mm length each side and pierced through a 16 Hundred

207 Gauge M.S.box having depth of 75 mm complete erected concealed in Twenty Five

ceiling with necessary Modular type round plate. only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying and erecting 19 / 20 mm. nominal bore "B" Class G.I Pipe 50.00 Rn. Mtr. 107.00 RS: One

/M.S. Pipe down rod erected duly painted for fan complete with Hundred Seven

necessary 24/0.2 flat 3 core flexible cable with earthing.The Down rod only

thickness,hole,locking arrangement,construction,power coating,colour

shed should be match as original down rod brought with ceiling fan.For

that agency has to give original down road sample to fabricator and

one sample down rod should be approved with EIC .After approval

given by EIC agency can use the down rod as per approved sample.If

without approval down rod will be erect on site,agency has to replace

them with own cost.(No vibration or wobbling of fan while rotating)

Supplying & erecting approved make 200mm sweep low noise 15.00 Each 1687.00 RS: One

decorative exhaust fan having Aerodynamically designed & Blanced Thousand Six

Blade, Blade finish Opaque,body colour White , finish Glossy , Rated Hundred Eighty

Speed 1800 revolution per minute ,air delivery 500m³ / hr , noise Seven only

level 50 dB , Power Consumption 35 W, ,Rated Voltage 230 V , no.

of blades 7 , guard 18 Louvers , square frame ABS body with inbuilt

lowers & square frame.( Havell's Make Ventilair LX or Bajaj, Usha,

Crompton & Equivalent Model Approved by EIC subject to Above

Specification )

Supplying & erecting single phase approved make industrial exhaust 1.00 Each 2034.00 RS: Two

fan suitable for medium duty ring mounted low noise operation Thousand

suitable for medium duty with metalic gril having following dia size and Thirty Four

maximum speed in RPM For 305 mm dia. 900 RPM (Make & Model only

Approved by EIC subject to Above Specification )

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying and erecting approved make heavy duty oscillating type 10.00 Each 2509.00 RS: Two

bracket fan A.C. 230 V. 50 Hz, 400/450 mm sweep wall mounted with Thousand Five

height adjustment and rotary tilting device complete with guard, Hundred Nine

211 flexible Core plug top complete erected with lead wires as directed. only

(Crompton Make High Flow model or equivalent make approved by

Desiging,fabricating,testing electrical panel (switch board) at 7.00 Sq. Mtr. 21500.00 RS: Twenty

manufacuturer's workshop and Providing & erecting at site. Panel One Thousand

should be weather proof, dust & vermin proof, floor mounted front Five Hundred

operated cubical panel board having IP-54 made from 2 mm. thick only

CRCA M.S. sheet for outer body,gland plate & doors, 1.6 mm. thick

CRCA M.S. sheet for internal partitions with necessary supporting

angles, flats including skirting, bending, drilling, welding, riveting with

internal partitions & cable alley,rubber gromets, rib, control wires,

backelite control fuses as per requirements,sufficient nos. of hinges for

doors, door locking arrangement, rubber gasket complete with

Required Nos. heavy Duty Connector with Cadmium plated nut and

212 bolt for Anti rusting and Al.busbar for earth, nuts/bolts,washer etc as

per instruction of engineer-In-Charge. Cost of supplied item like

switchgears, LED indicator ,CTs , busbars and PVC FRLS copper wire

with suitable size for power interconnection,measuring instruments,

foundation flange-bolts-base plates, cost of C channel/angle iron stand

(1ft to 2ft height as per cable size)shall be excluded of panel

fabrication.Specification of suppiled items is attached seperatly.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

The panel shall be supplied with Seven Tank chemical process. which

shall be carried out before applying painting, painted with powder

coating. (The rates excludes the cost of switchgears, busbars,

interconnecting mains & Copper / Aluminium strip, fuse, meters etc.

The dimension shall be measured excluding base beams.switchgear of

approved brand and specification shall be used and erected at CPRI

approved panel manufacturers only. Busbar compartment must be

separate for easy termination of tails/cables and to avoid least

distance of punching holes in busbar. Panel depth shall be 350 mm.

Panel manufacturer have to give 4 years service support if in case of

breakdown or fault. Panel manufacturer have to submit electrical

meter calibration report. Agency should design the panel in such a way

that there should not be any excess in panel area (sq.mtr) & length of

bus-bar (mtr), if any excess is need to be done agnecy has to draw

attention to GSPHCL at the time of approval of G.A. drawing.

Loading and unloading of above item shall be done by hydra and skill

work force under supervision of electrical engineer and guidelines

given by manufacturer to avoid damage to the item.

Size of door and Ele. room / Pump room shall be measure and provide

to panel manufacturer to prepare GA drawing considering the size of

electrical room/pump room door and also inside size of it.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Agnecy has to co-ordinate with civil agency for giving proper

dimenssion of electrical room/pump room to accomodeted panel

easily.[Including Necessary numbering / marking on PANEL done with

red colour radium sticker as per site requirement and instructions

given by EIC on site. Font / number size given by EIC on site as per

requirement] (See attached details specification of panel &

manufacture also while quoting rate. [Manufacturer must be of

Gujarat state so three stage inspection can be done if required and

service support]

Supplying & erecting MINI SECTION PILLAR 75 x 60 x 45 cms fabricated 2.00 Each 3560.00 RS: Three

from 16 Gauge thick joint less M.S. Sheet with angle iron legs 45 cms Thousand Five

long made from 35 x 35 x 5 mm thick. Jointless M.S. Angle with cable Hundred Sixty

clamps to be burried in ground to have appropriate erection to work only

Uniform Until erected with cement concrete foundation and 45 cms

high bricks work finishing with plaster etc. hinged double door with 3"

x 4" vision panel covered with Mesh & V. panel overlapping with flap

for meter reading internally supported on both side, with internal and

outside looking arrangement with look and keys in duplicate 35 x 35 x

5 mm M.S. Angle of Two Nos. one is welded and other with nut and

bolt for erecting backlite sheet. Painting the Section Pillar inside and

out side with three tank powder coated paint.. Section pillar roof

should be without joint with water leakage proof & tested as per IP

test & followed by IS 2147 of

Providing and erecting in existing fabrication panel Approved make 15.00 Each 6723.00 RS: Six

Four pole moulded case circuit breaker having breaking capacity ICU of Thousand

25 KA. at 415 V,having normal current rating up to 25 A to 100A. with Seven Hundred

214 Fixed thermal & magnetic release suitable to work on A.C. supply 50 Twenty Three

c/s. with all internal connections, spreader tinned copper & complete only

erected in existing 16 G.M.S. housing.ICS=100% of ICU only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting in existing fabrication panel Approved make 2.00 Each 8774.00 RS: Eight

Four pole moulded case circuit breaker having breaking capacity ICU Thousand

of 35 K.A. at 415 V having normal current rating of upto 125 A. with Seven Hundred

215 variable thermal & magnetic release suitable to work on A.C.supply 50 Seventy Four

c/s. with all internal connections, spreader tinned copper & complete only

erected in existing 16 G.M.S. housing. ICS=100% of ICU only.

Providing and erecting in existing fabrication panel Approved make 2.00 Each 17667.00 RS:

Four pole moulded case circuit breaker having breaking capacity ICU Seventeen

of 35 K.A. at 415 V having normal current rating of upto 200A. with Thousand Six

216 variable thermal & magnetic release suitable to work on A.C.supply 50 Hundred Sixty

c/s. with all internal connections, spreader tinned copper & complete Seven only

erected in existing 16 G.M.S. housing. ICS=100% of ICU only.

Supplying & erecting approved make Four Pole 415V change over 2.00 Each 7713.00 RS: Seven

switch interior for panel mounting with operating mechanism A.C.23 Thousand

duty confirming to IS for 125A Seven Hundred

For 250A 1.00 Each 13221.00 RS: Thirteen

Thousand Two

Twenty One

Providing and erecting in existing fabrication panel Approved make 2.00 Each 22813.00 RS: Twenty

Four pole moulded case circuit breaker having breaking capacity ICU Two Thousand

of 35 K.A. at 415 V having normal current rating of 250 A. with variable Eight Hundred

thermal & magnetic release suitable to work on A.C.supply 50 c/s. with Thirteen

all internal connections, spreader tinned copper & complete erected in only

existing 16 G.M.S. housing. ICS=100% of ICU only.(Pump room Main

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting in existing fabrication panel Approved make 1.00 Each 24272.00 RS: Twenty

Three pole moulded case circuit breaker having breaking capacity ICU Four Thousand

of 35 K.A. at 415 V having normal current rating of up to 250 A. with Two Hundred

variable thermal & magnetic release suitable to work on A.C.supply 50 Seventy Two

c/s. with all internal connections, spreader tinned copper & complete only

erected in existing 16 G.M.S. housing. ICS=100% of ICU only.(GEB

cutoff switch )

Providing and erecting following additional parts for panel mounting 20.00 Each 952.00 RS: Nine

MCCBs (A) Extended operating rotary handle with pad lock with three Hundred Fifty

position trip, off , on suitable for 25A to 250 A panel mounting Two only

Supplying & erecting following spare parts for panel mounting Switch 1.00 Each 272.00 RS: Two

Disconnector Fuse Units Neutral Link for UP to 800 Amp Switch Hundred

Seventy Two

Supplying and erecting tripple pole & neutral 440V / 500 V Panel 3.00 Rn.Mtr 1942.00 RS: One

mounting Copper Busbars with four equal Nos. of electrolyte bus Thousand Nine

having current density not more than 1.6 Amp. / sq.mm (Rated current Hundred Forty

/ cross section area) duly wraped with colour insulating tape for phase Two only

222A sequence of following current carrying capacity, erected with

necessary bus bar supports / insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections.Suitable

for 100 Amp. capacity .

For Suitable for 200 Amp. capacity 3.00 Rn.Mtr 3171.00 RS: Three

Thousand One

222B Hundred

Seventy One

For Suitable for 300 Amp. capacity 2.00 Rn.Mtr 4861.00 RS: Four

Thousand Eight

222C Hundred Sixty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Approved make Earth fault Relay suitable to mount with inter 2.00 Each 5427.00 RS: Five

connection to moulded case circuit breaker having CT ratio & MCCB Thousand Four

223A rating as following along with shunt trip 220 V AC with all internal Hundred

connections & complete erected in existing M.S.housing. For 125 A - Twenty Seven

200 A, CT Ratio 1/200 only

For 250 A -400 A , CT Ratio 1/400 1.00 Each 5898.00 RS: Five

Thousand Eight

Hundred Ninty

Eight only

Providing and erecting multifunctional meter suitable for application of 3.00 Each 13984.00 RS: Thirteen

Power monitoring and showing measurement of following Voltage, Thousand Nine

Frequency, Apparent energy, Apparent power, Active and reactive Hundred Eighty

energy, Active and reactive power, Average voltage Vavg, Peak Four only

demand power PM, QM, SM, Demand power P, Q, S, Apparent power

S, S1, S2, S3, Unbalance current, Power factor and displacement PF

(signed, four quadrant), Calculated neutral current, Active, reactive,

apparent energy (signed, four quadrant), Active power P, P1, P2, P3,

Voltage U21, U32, U13, V1, V2, V3, Phase currents, Average current

Iag, Peak demand currents, Reactive power Q, Q1, Q2, Q3, Demand

current I1, I2, I3, [Us] rated supply voltage 40...300 V AC 45...65 Hz,

40...300 V DC, Network frequency 50 Hz, Type of network 3P, Display

type 7 segments LED, Display colour Red, Messages display capacity

fields of 4 characters, Display digits 12 digit(s) - 14.2 mm in height

Supplying and erecting approved make set of indicator lamps of LED 15.00 Each 43.00 RS: Forty

225 type lamp, lense cover, Bakelite holder complete erected with Three only

necessary connections.

Providing, erecting, testing and commissioning of L.T. Current 12.00 Each 272.00 RS: Two

Transformer with bus bar primary 50/5 to 1000/5 ratio 15 VA burden Hundred

having 0.5 Class Accuracy Duly secured with insulating materials Seventy Two

connected to the meter. only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load 2.00 Each 649.00 RS: Six

(C Curve) having 10KA breaking capacity & confirms to IS:8828 in Hundred Forty

existing box having following capacity. For 32 Amp. Nine only

For 40 Amp. 25.00 Each 728.00 RS: Seven

Twenty Eight

For 63 Amp. 8.00 Each 803.00 RS: Eight

227C Hundred Three

Providing & erecting 240 V MCB double pole switch for motor & 20.00 Each 360.00 RS: Three

inductive load (C Curve) having 10 KA breaking capacity & confirms to Hundred Sixty

IS:8828 in existing box having following capacity. For 40 Amp. only

Providing and Erecting of Miniature circuit breaker single pole 6 Amp. 30.00 Each 122.00 RS: One

to 25 Amp. suitable to operate on 240 V A.C. system and having Hundred

breaking capacity 10 KA to be erected in existing box. confirming to IS Twenty Two

8828/1996 with ISI Mark. only

Supply and Fixing of company fabricated Sheets steel powder coated 5.00 Each 299.00 RS: Two

enclosure Size 4X6 for incorporating Two nos. MCB.(MCBDB must be Hundred Ninty

erected in line level and level with spirit level and finish the external Nine only

edge with box cutting plaster)( Same color MCB(SP/DP) should be used

as same as MCBDB)( Incl. necessary numbiring /marking on box done

with RED colour radium sticker as per site requirement and instruction

given by EIC on site. Font/ Number size given by EIC on site as per

requirement)(The enclosure should be used of same company of

MCB/ ELCB to be used)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supply and Fixing of company fabricated Sheets steel powder coated 8.00 Each 486.00 RS: Four

enclosure minimum Size 8 X6 for incorporating Four nos. MCB.(The Hundred Eighty

enclosure should be used of same company of MCB/ ELCB to be used) Six only

(MCBDB must be erected in line level and level with spirit level and

finish the external edge with box cutting plaster)( Same color

231 MCB(SP/DP) should be used as same as MCBDB)( Incl. necessary

numbiring /marking on box done with RED colour radium sticker as per

site requirement and instruction given by EIC on site. Font/ Number

size given by EIC on site as per requirement)

Supply, Installation, Testing & Commissioning of Three Phase, 440 V 3.00 Each 6319.00 RS: Six

Surge Suppressor protection Device (SPD) & 40 Amp TPN MCB (or As Thousand Three

per SPD OEM guide line for the protection of SPD which is erected such Hundred

a way that it can be operated easily) SPD must be capable to protect all Ninteen

electrical and electronics equipments if SPD blast or fuse then the only

232 panel builder must have replace it soon during defect liability

period.The Detail Specification of SPD are As per Attached sheet with

Annexture -A(E). (Hakel, Iskira,Obo make) (With Five year

Gaurantee/warranty)

Supplying & erecting 12 mm thick Hylam sheet of approved make and 3.00 Sq.Mtr 2289.00 RS: Two

grade on 25 x 25 x 3 mm red oxide painted angle iron frame suitable Thousand Two

for fixing ICDP SWITCH and energy meter (contractor shall make Hundred Eighty

approved drawing of Bakelite sheet To arrange required No. of Energy Nine only

meter & ICDP switch -busbar etc. as per Actual space available in

electrical room at site)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing, erecting, Fabricating the M.S. structure as per requirement 500.00 Kg 74.92 RS:

of site as per structure design Including proper size approved by EIC Seventy Four

of M.S. angles, flats, bars, square pipe, channels, sections (Tata, Jindal, and Paise Ninty

Asian, JSI Make) complete with cutting, welding, grinding and finishing Two only

duly painted with Asian/Nerolac make premium quality oil paint and

234 true care red oxide metal primer,asian paint make with erection on

site as per direction of engineer in charge with necessary grouting

cementing, plastering and finishing complete. All hole opening of

square pipe end must be closed with M.S plate welding. Payment will

be done on KG as per Actual weight.

Providing & erecting approved make ATS panel suitable for following 1.00 Each 56780.00 RS: Fifty Six

size of 100 KVA 3 phase, 415 V., 50 cycles, A.C. diesel generating set Thousand

complete of scope as detailed below: Seven Hundred

1) Power module: Motorised Changeover switch with ATS controller, Eighty only

235 Auxiliary contactor with NO & NC contacts with Automatic Battery

Charger, indicating lamps for Generator ON, Mains ON, Load and

suitable control terminals and power terminals with neutral earthing

For ATS Panel for 62.5 KVA 3 phase DG Set

Providing and erecting required size Copper strip with heavy duty PVC 30.00 Kg 787.00 RS: Seven

shrinkable insulation sleeve for earthing of UPS, LV System, Hundred Eighty

Transformer and DG set neutral etc. using Fiber Porcelain Red Earthing Seven only

Strip Insulator.All fixing accessories such as Fiber Porcelain Red

Earthing Strip Insulator, brass screws rawl plugs etc., Jointing by

rivetting and brazing after rivetting for copper strip) Corrosion

protection of buried conductors with bituminous coating and covered

with PVC tapes. 25 x 3 mm / 25X6mm / 32X6mm / 50x6mm CU. strip/

38x6 Cu earth link etc.

Supplying and laying UPVC cable trunking system comprising 30.00 Mtr 275.00 RS: Two

unplasticised polyvinyl, chloride rigid material with ignition free & Hundred

237A flame proof confirming BS .All necessary accessories and measuring of Seventy Five

following sizes. For 75 mm x 50 mm trunking (Honeywell, LEGRAND, only

OBBO make Only)

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For 100 mm x 50 mm trunking (Honeywell, LEGRAND, OBBO make 30.00 Mtr 424.00 RS: Four

Only) Hundred

Twenty Four

Supplying and erecting approved make GRP / FRP Perforated type 50.00 Rn.Mtr 526.00 RS: Five

Cable Tray .Material – Corrosion Resistant Polyester Flame Retardant Hundred

U.V. Stabilized Resin System - Manufactured from Pultruded Sections- Twenty Six

Polyester Resin System, Glass Content : 55 – 60 % - - Standard Length : only

3000mm- Support Span – 1500mm, Deflection L/200 - Specification

NEMA FG1 1993- UV Resistant - Flame Retardant – IS 6746 - Appendix

K/UL 94, Very Low Flammability - Specification Followed NEMA FG1

Oxygen Index – Minimum 30% as per ASTM D 2863 - Flame Spread

(Extent of Burning) – 20mm as per Standard ASTM D 635 - Tensile

Strength – 4000 – 8000 Kg/Cm2 as per Standard ASTM D 638 - Flexural

Strength – 2500 – 10000 Kg/Cm2 as per Standard ASTM D 790- Izod

Impact Strength – 130 Kg/Cm2 as per Standard ASTM D 256-

Compressive Strength – 2500 – 5000 Kg/Cm2 as per Standard ASTM D

695- Barcol Hardness – 50 –

For Width - 300mm, Pultruded “C” Channel with 50mm Sides 4mm

Thickness, Loading 30 Kg./Mtr.

For Width - 150mm, Pultruded “C” Channel with 30mm Sides 3mm 50.00 Rn.Mtr 230.00 RS: Two

238B Thickness, Loading 15 Kg./Mtr. Hundred Thirty

Supply, Installation testing and commissioning of 16 Gauge M.S. 10.00 Each 750.00 RS: Seven

Powder coated floor raceway Access outlet / service junction box with Hundred Fifty

16 Gauge M.S. Powder coated Cover plate with duct entry 25 mm / 38 only

239 mm size having epoxy powder coated trap lead with corrosion & rust

free with adjustable levelling screw of following size. For 300 mm x

300 mm x 50 mm depth.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supply & Installation of 2.0 mm thick SS 304 for Existing Floor 2.00 Sq. Mtr 8797.00 RS: Eight

Junction box Cover Plate as per Site requirement & required Size Thousand

with required size SS bolt, Srew & champhear edge Seven Hundred

Ninty Seven

SITC of specified make X color for Cat. 6 Data and Y color for Cat. 6 1200.00 Mtr 47.00 RS: Forty

voice cable to be done in prelaid PVC pipe / raceway, but without the Seven only

cost of raceway or pipe (the wire is to be drawn from MFD/ JB to

outlet point) For CAT - 6 (For Computer Cabling and For Voice

Cabeling) (Dlink, Molex, commscope system, Legrand make Only)

SITC of 24 x 10/100/1000BASE T ports 1.00 Each 15247.00 RS: Fifteen

4 x Gigabit RJ45/SFP Combo ports Thousand Two

Advanced L2 switching and security features Hundred Forty

L2+ Static Routing Seven only

Optional “standard mode” or “surveillance mode” management user

interface.

24 Port. [Dlink,cisco enterprise,HP enterprise,netgear,Allied telesys

and model approved by EIC as per specification]

SITC of Jack Panel, fully loaded with 24 nos. UTP ports for PCB based 1.00 Each 4357.00 RS: Four

IO Jacks (RJ45, TIA 568C Category 6, Installation and Termination of all Thousand Three

24 nos. Catergory 6 UTP , unloaded with individually replaceable 24 Hundred Fifty

nos. Category 6 I/O Jacks complying with TIA 568.C.2, as per given Seven only

jack specification Shall be suitable for loading unshielded & shielded

jacks for different category systems (CAT 6 & CAT 6A)

[molex,commscope system,legrand ]

Supply and installation of 9U steel rack for installing 4 nos. Ethernate 1.00 Each 11441.00 RS: Eleven

switches/Hubs. The Rack should be fully enclosed steel housing Thousand Four

fabricated with 14 SWG sheet and powder coated with glass doors and Hundred Forty

244 having wire management systems. The rate includes the Exhaust Fan, 2 One only

nos. 4 socket and 1 switch power strip and all the wiring in the rack.

Size 600 X600 mm (Rittal, Valrack, APC, Legrand Make )

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

SITC of company fabricated Patch cords shall conform to Cat 6 & 22.00 Each 155.00 RS: One

conductor shall be stranded for better flexibility Shall support network Hundred Fifty

line speeds up to 1 Gbps Shall have RJ 45 jacks. For 1 Five only

Mtr.[molex,commscope system, legrand ]

SITC of company fabricated Patch cords shall conform to Cat 6 & 22.00 Each 199.00 RS: One

conductor shall be stranded for better flexibility Shall support network Hundred Ninty

line speeds up to 1 Gbps Shall have RJ 45 jacks. For 2 Mtr. Nine only

[molex,commscope system,legrand]

Providing & erecting main Distribution (MDF) indoor type, back 2.00 Each 1355.00 RS: One

mounted frame as per DoT standard approved with krone strips For Thousand Three

247 Suitable for 20 pair (Kron type) Hundred Fifty

Five only

Supplying & erecting Delton or approved make Telephone Cable 100.00 Mtr 126.00 RS: One

electrolytic copper conductor PE insulation twisted in two pairs, & Hundred

wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Twenty Six

Jacket suitable for telephone wiring & confirming to C DOT erected in only

existing pipe. of following size of conductors & nos.of pairs. With

necessary connections.(a) Conductor Size 0.5 mm Unarmoured

Twenty Pairs .(RRCAB/ Finolex/ Havells make only)

Providing and erecting Inverter based approved make Cassette type 5.00 Each 143613.00 RS: One lac

split air-conditioning unit consisting of Copper condensing unit with Forty Three

variable speed fan motor, inverter type hermetically sealed rotary Thousand Six

compressor with accessories etc. duly connected separately erected Hundred

evaporating unit and blower motor with its accessories by means of Thirteen

extra supplied proper insulated copper tubing,drain PVC pipes suitable only

for (cost includes Eco Friendly green gas charging and 15A plug top &

Remote Control & MS Stand) with necessary core cutting.( 3 star and

above of current year) with necessary core cutting.[ Model Approved

by EIC ] For 3 ton capacity- 1/3 Phase

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting Inverter based approved make split air- 8.00 Each 56271.00 RS: Fifty Six

conditioning unit consisting of copper condensing unit with variable Thousand Two

speed fan motor, inverter type hermetically sealed rotary compressor Hundred

with accessories etc. duly connected separately erected evaporating Seventy One

unit and blower motor with its accessories by means of extra supplied only

250 proper insulated copper tubing,drain PVC pipes suitable for ( cost

includes Eco Friendly green gas charging and 15A plug top & Remote

Control & MS Stand) with necessary core cutting.(1)For ISEER Range

(KWH/KWH)(3.1 to 3.99) For 2.0 ton capacity [ Model Approved by

Executing comprehensive (All in All) service & maintenance ( Four Service 5.00 Each 14334.00 RS: Fourteen

per year + Spare parts{ 2 Dry Service & 2 water or Chemical service) Thousand Three

Contract for defect liability period as per tender items and conditions with Hundred Thirty

AC agency for defect liability period and copy of this contract will be Four only

submitted before final bill. Agency has to quote rate accordingly. Agency

has to also provide the fitness certificate from system agency and submit

to G.S.P.H.C.L. Agency has to submit FDR of approved bank as per clause

2.0 of section 3, Rs.116454.00+ GST or quoted amount which ever is

higher to GSPHCL. for minimum maturity period of Five years in favour of

GSPHCL., Which will be released after successful completion of A.M.C. & at

the completion of defect liability period. In any case without submitting

FDR final bill submission will not be done.AC agency has to provide four

[04] servicse per year during defect liability period and one copy of

necessary service report duly singed by concern police officer and No

Defect Certificate from police department at the time of releasing Security

Deposite will be submitted to EE (Ele.), GSPHCL. Without above Service

reports security Deposit of whole project will not be released. (Agency will

have to submit stability and performance certificate regarding AC system

from authorized dealer/OEM of AC at the time of final SD release). For

delay in rectifing the fault penalty will be deducted from agency S.D.

For 3.0 Ton capacity Cassette Split AC machine.

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For 2.0 ton capacity split AC machine 8.00 Each 5598.00 RS: Five

Thousand Five

251B Hundred Ninty

Eight only

Air condationer copper tubing with minimum 19mm thick class O 200.00 Rmt 1147.00 RS: One

nitrile rubber insulation for entire piping system. Exposed refrigerant Thousand One

piping should be additionally insulated with factory laminatede Hundred Forty

200GSM glass cloth for UV and mechnical protection and manufacturer Seven only

recommended adhesive ( Solvent-free) sealant appiled at all joints Uv-

Protection layer. additional layer of UV paint over GC for all exposed to

atmosphere piping for weather protection of pipes & insulation and

prevention of rain water ingress. For Single phase/ Three Phase Split

A.C. Machine/ Cassate A.C Machine insulated pair of soft, copper

tubing including power and control cable, 20/25/32 mm Dia. Rigid (ISI

marked) UPVC drain pipe. Duly Insulated with 6 mm elastomeric

nitrite rubber up for Split AC machine up to 4 TR capacity

Carry out RCC Core cutting- up to 100 mm dia./200mm thick 20.00 Each 1188.00 RS: One

Wall/beam/slab with providing PVC pipe of 3 mm thick inside and Thousand One

253 necessary finishing on both ends of wall.( For Electrical Work) Hundred Eighty

Eight only

Providing & erecting XLPE (IS : 7098) (I) 88 ISI marked armoured 1500.00 Mtr 451.00 RS: Four

Copper cable for 1100 volt to be laid 90 cms. Under ground or to be Hundred Fifty

laid on wall with suitable G.I. heavy guage 1.0 mm thick cable clamp or One only

in existing DWC pipe underground or road crossing or floor of following

size of cables

For 4 core 4 Sq. mm (For street light work )

For 4 core x 6 sq.mm.(For street light work,Terrace Pump ) 400.00 Mtr 631.00 RS: Six

Hundred Thirty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable 110.00 Mtr 150.00 RS: One

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with Hundred Fifty

necessary clamps or in existing trench / pipe of following size of cables only

For 4 Core 6 Sq.mm (If Required)

For 4 core 16 Sq. mm(If Required) 200.00 Mtr 182.00 RS: One

Hundred Eighty

For 4 core 25 Sq. mm (If Required) 100.00 Mtr 227.00 RS: Two

Twenty Seven

For 3 1/2 core 35 Sq. mm ( 16 Sq. mm 1/2 core) (For Terrace 400.00 Mtr 262.00 RS: Two

255D Outdoor Panel AC & automization machine room & garrage to pump Hundred Sixty

room panel with spare ) Two only

For 3 1/2 core 70 Sq. mm ( 35 Sq. mm 1/2 core) (Main building 350.00 Mtr 450.00 RS: Four

255E electrical room to pump room panel with spare & Fire panel) Hundred Fifty

For 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) (UGVCL cut out 650.00 Mtr 583.00 RS: Five

switch To pump Room panel With Spare) Hundred Eighty

Three only

Providing & laying HDPE Double walled corrugated pipes (DWC) 2500.00 Mtr 117.00 RS: One

(conforming to IS: 16205 (part 24) 2018)) with minimum load required Hundred

of 450N capacity with anti rodent and ultra violet material properties Seventeen

with necessary connecting accessories of same material at required only

depth to be laid 90 cms. under ground for laying of cable below

ground / road surface for enclosing cable and back filling the same to

make ground as per original.

For Outer dia. 50 mm and Inner dia. 38 mm. ) (Test Certificate to be

Submitted)

For Outer dia. 90 mm and Inner dia. 75 mm. (Test Certificate to be 320.00 Mtr 150.00 RS: One

256B Submitted) Hundred Fifty

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For Outer dia. 120 mm and Inner dia. 100 mm.(Test Certificate to be 600.00 Mtr 191.00 RS: One

Submitted) Hundred Ninty

Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below 50.00 Mtr 261.00 RS: Two

ground across the road crossing or on floor with necessary material in Hundred Sixty

an approved manner and making the ground as per original. For One only

Providing & fixing double compressed heavy duty flange type brass 80.00 Each 43.00 RS: Forty

cable gland with rubber ring for P V C insulated armoured cable Three only

258A complete with outgoing tails, insulating tape etc. For following size

cables. For 2 to 4 core x 2.5/4.0 Sq. mm ( Comet, HMI, Dowells Make

For 4 core x 6 sq.mm 30.00 Each 48.00 RS: Forty

Eight only

For 4 core x 16 sq.mm 30.00 Each 57.00 RS: Fifty

Seven only

For 4 core 25 Sq. mm 30.00 Each 61.00 RS: Sixty

For 3 & 1/2 core 35 Sq. mm 30.00 Each 75.00 RS:

258E Seventy Five

For 3 & 1/2 core 70 Sq. mm 15.00 Each 102.00 RS: One

258F Hundred Two

For 3 & 1/2 core 95 Sq. mm 15.00 Each 130.00 RS: One

258G Hundred Thirty

Providing & fixing Solderless crimping type Aluminium lugs conforming 50.00 Each 6.00 RS: Six

to IS suitable for cable of following size evenly crimped with high only

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (Dowells,

Comet, Cosmos make only)

For 6 Sq.mm

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For 16/25 Sq.mm. 100.00 Each 15.00 RS:

259B Fifteen only

For 35/50 Sq.mm. 100.00 Each 20.00 RS:

259C Twenty only

For 70 Sq.mm. 40.00 Each 25.00 RS:

259D Twenty Five

For 95 Sq.mm. 40.00 Each 40.00 RS: Forty

Providing & fixing Solderless crimping type Copper lugs conforming to 450.00 Each 8.00 RS: Eight

IS suitable for cable of following size evenly crimped with high pressure only

tool & connected to switchgear terminals with brass/cadmium plated

nut bolts in an approved manner.

For 1.5/2.5 to 6 Sq.mm

Supplying following size of Light duty “A” Class G.I. Pipe & erecting as 50.00 Mtr 171.00 RS: One

directed by Engineer-in-charge. For 25 mm dia. Hundred

Seventy One

Providing & Erecting Mains with ISI marked, 1.1 KV grade electrolyte 50.00 Mtr 34.00 RS: Thirty

multi stranded, annealed copper conductor with heat resistant PVC Four only

insulated conforms to IS:694, IEC 227 erected in existing pipe of

262A following size (Specifically for control panel, relays, power switchgears,

motor starters & control wiring) with required size of copper lugs, SS

nuts and bolts if required For One wire 2.5 Sq.mm.

For One wire 6.00 sq. mm 100.00 Mtr 70.00 RS:

262B Seventy

For One wire 10.00 sq. mm 100.00 Mtr 114.00 RS: One

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

For One wire 16.00 sq. mm 200.00 Mtr 176.00 RS: One

Seventy Six

For One wire 25.00 sq. mm 250.00 Mtr 293.00 RS: Two

Hundred Ninty

Three only

For One wire 70.00 sq. mm 100.00 Mtr 829.00 RS: Eight

Twenty Nine

For One wire 95.00 sq. mm 50.00 Mtr 1138.00 RS: One

Thousand One

262G Hundred Thirty

Eight only

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Supplying and erecting approved make Octagonal pole made from HR 17.00 Each 9044.00 RS: Nine

sheet steel. The pole should be made as per IS. and shall be coated Thousand

with hot dip galvanizing as per IS 2629/2633/4759, suitable suspend Forty Four

local wind speed with integral Junction box with Hot Deep Galvanised only

door having 2 nos. 180° operated hinges & 2 nos. Ln key locking with

silicon rubber gasket. Consist of terminal plate of min 6mm Hylam

sheet, standard profile 35 mm X 7.5 mm Din-Rail & MCB, Brass stud

type terminal and arrangement for cable termination to be erected on

RCC foundation as per details given by manufacturer and EIC

263 considering site requirement.Pole Foundation (1) Grade of RCC 1:2:4,

(2) Grade of steel rainforcement of RCC FE 415, (3) Clear cover to

rainforcement 50mm, (4) Concrete vibrated, (5) use suttering /

farma(6) Foundation Colour Same As Building Colour outside Shade (7)

Detail drawing will be given by corporation .For 6 Mtr. Long 70 mm

Top X 135 mm bottom dia, 3 mm thickness with

200mmX200mmX12mm base plate, 4-M20 Bolts and 600mm long with

necessary G.I. J Bolts .Approx Pole weight 59 kg

Supplying and making Coil type earthing, coil made from 8 SWG 17.00 Each 369.00 RS: Three

galvanised iron wire with 50 mm OD and 50 turns (length of turns Hundred Sixty

approx. 200 mm) and having additional continuous streight length of Nine only

3.00 mtr at open end and should be connected to earthing bolt and

burried in 1.5 mtr deep specially prepared earth pit complete with salt

and charcoal/coke as required for coil type earthing.(Approx weight of

coil 1.0 to 1.1 Kgs)

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 200.00 Mtr 58.00 RS: Fifty

kv grade ISI marked copper wires of following size to be erected as Eight only

directed. For 3 core 1.5 sq.mm. PVC insulated round copper wire ISI

Providing & Erecting Flexible PVC insulated multistrand multicore 1.1 330.00 Mtr 96.00 RS: Ninty

kv grade ISI marked copper wires of following size to be erected as Six only

directed. For 3 core 2.5 sqmm PVC insulated round copper wire ISI

Estimated Rate (in

Description Of Item Qty. Unit Amount (Rs.)

No. In Figure In Words

Providing and Fixing SITC of Outdoor aesthetically designed LED Street 7.00 Each 4406.00 RS: Four

Light Luminaire with total consumption of 48 - 59 Watts with single Thousand Four

piece die cast aluminium housing, High power White LEDs wattage of Hundred Six

5 Watt & Above shall be mounted on high quality metal core PCB with only

extremely precison designed heat sink complete with IP66 protection

Class with polycarbonate / thoughened glass cover / cluster Lens the

fixture should be suitable for pole/bracket mounting. The fixture to

comply both LM79 and LM 80 guidelines with LED module L70 at

50,000 hrs, provided with high quality polycarbonate lenses /cluster

Lens for better light distribution. The Fixture Should be able to be Pole

Mounted and also bracket mounted, provided with high quality driver

for protection against high and low Voltage cut Off, opertional for high

amibient and high humid envirnoments, THD of driver should be less