SPL REPAIR TO BLDG NO. P-921 (ATT LINE) AT ARMY AREA JODHPUR UNDER GE (ARMY) NO. 01

Amount

S&F in replacement rotational moulded polythene water storage tanks of 500 ltrs capacity, white three layered (ISI marked) (Cylinderically vertical with closed top) hoisted and fixed in postion all as specified in SSR Part-I with and including PTMT ball valve heigh pressure with epoxy coated aluminium rod and high density plastic ball suitable for 20mm bore pipe weight not less than 210gms including dismantling old tanks or remove to store or credit to contractor, complete all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or credited to contractor complete all as specified and directed.

Supply, laying, testing & commissioning of 20 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) laid in trenches, with CPVC solvent, complete all as specified and directed.

Supply, laying, testing & commissioning of 25 mm outer dia CPVC pipe,SDR-11, with all fitting (eblow, socket,tee with internal thread of brass) laid in trenches, with CPVC solvent, complete all as specified and directed.

M&L for Exposing existing RCC members such as columns, slabs, lintels, beams, etc. up to the main reinforcement carefully by means of Chisel & hammer, hard wire brushes or any other mechanical means, so as to remove all loose concrete and cleaning the surface to remove all dust particles, etc. and make the surface ready for chemical treatment in bone dry condition. Note : Rate shall be included for necessary scaffolding and safty measures.

M&L for providing and jacketing the distresssed concrete elements in patches using single component, shrinkage controlled, polymer modified cementitious micro concrete such as Rendrock Laxtra of Fosroc make that achieves a compressive strength of 35 Mpa in 3 days (BS 1881), Flexural strength 09 MPa at 28 days as per BS 6319 Pt-3, Tensile Strenght 3.5 MPa in 28 days as per BS 6319 Pt-7 "Form & Pour" method inclusive of Manpower, Material and Euipment. Note Quoted rate shall be inclusive of providing necessary formwork all as specified and directed

M&L for 30 mm thick guniting in patches on to the required area on RCC/PCC columns, beams, stairs, lintels, retaining walls, sunshades, roofing slab etc. of all sizes and shapes at all heights from existing ground floor and all locations with cement and mortar 1:2 (1 cement : 2 sand) under 2 to 2.8 Kg/Cm2 pressure after removing the damaged loose spalt concrete portions by chipping, removal of dust and applying one coat of rust convertor/kp-100 equivalent grade over reinforcement wherever necessary providing and tying in position 25mmx25mmx12 gauge dia wire MS welded mesh or smaller size over treated surface ready to receive grouts, curing for 10 days etc,loose spalt concrete portions by chipping, removal of dust over treated surface ready to receive grouts including 5mm to 10mm thick plastering in CM 1:4 to match existing surfaces and finished even and smooth including curing for 10 days etc, complete operation all as directed including labour charges hire for all tools and plant machineries cost of consumables, scaffolding all types of protective equipments, plant floors, pipelines, vessels, materials etc. so as to do guniting in plant, removing the debris out of MOD land in low lying areas and leveling as directed, incl two coat of white wash over one coat of primer complete all as directed by Engr-in-charge. Note (i) After placing the additional reinforcement all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and alloy to dry. To this surface apply chemistic polycrete admixture at the rate not less than 2% by weight of cement or as per manufacture’s instructions. (ii) When polymix coating is in tackey condition guniting is done with polycrete admixture at the rate not less than 2% by weight of cement or as per manufacturer’s instruction. Polycrete admixture shall be procured from Chemical Adhesive Pvt Ltd Co or their authorized dealer. (iii) Cost of the above aspects shall be deemed to be included in the quoted rate of the respective item and nothing extra shall be paid on any account.

Demoltion of cement cocrete padding of water proofing treatment from roof pading taking down bituminous polythene sheets plaster etc overall thickness n.exc 200mm , cleaning of concete surfaces by wire brushres scrubbing down water and removing the dust debris etc. to out side of MD land from the site,complete all as directed.

M & L for Plain cement concrete 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) as over roof for making good depression/ undulation to make the existing as filling in depression of roof slab,complete all as specified and as directed.

M& L for carring out roof treatment in the following stages (a) Apply first coat of bituman primer confirming to IS 3384-1986 @ o.30Kg/ Sqm over and including 10 mm thick cement mortar (1:3 ) mixed with liquid water proofing compound as per manufacturer instructions finished even and smooth without using extra cement complete all as specified and directed. (b) Second coat of bonding material using blown type bitumen confirming to IS- 702-1988 grade 85/25 @ 1.20 Kg/ Sqm. (c) Third layer of APP modified polymeric membrane centre core of 20 micron HMHDPE outer film 20 micron both sides thickness 3.00mm having weight not less than 3.00Kg /Sqm with over lap 100mm & end lap 150. (d) Fourth coat of bonding material using blown type bitumen confirming to IS 702-1998 of grade 85/25 @ 1.20 Kg/Sqm. (e) Fifth and top most layer of surface finish which act as protective layer shall be of 40-50 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded agg of crushed stone padding including WPC, well compacted with V -shaped groove 6 mm wide and 10 mm depth filled with mastic bitumen of (1:1) of proportion complete,size of PCC panel with grooves shall not be exceed 0.36 Sqm all as specified.

M&L for Mild steel framed work of Fe 290 Gde E-165 as in guard bars brackets & supports for sunshades roof slabs etc for jacketting around columns,as in railings ,supports for cooler platforms & the likes etc using MS angle iron, sq pipes flat iron , MS plates & bolts etc complete all as specified & directed incl necessary welding in position etc,complete all as specified and as directed.

Taking down carefully cement conc /spalled out concrete from RCC roof projections, cilinigs ,sunsheds, beams, etc upto cover depth by chipping out lightly including necessary scafolding etc ,complete all as specified and as directed.

M & L for Cleaning the existing reinf of slabs , chajjas etc & applying a coat of SIKA RUSTOFF 11 to remove the loose rust particles etc & throughly cleaning the surface,complete all as specified and as directed.

M & L for 15 -20 mm thick rendering in CM 1:1:2 using1 part of cement 1 part 2-3 mm screenings of stone agg & 2 parts coarse sand over the bond coat applied surfaces with cement mixed with SIKA PLASTOCRETE SUPER admixture @ 100 gm /50kg of cement & finishing the surface even & rough to receive final rendering coat,complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:3 & finishing the surface even & smooth without using extra cement, complete all as specified and as directed.

M & L for GI chicken wire mesh of 0.71 mm dia wire & 12 mm mesh size fixed with nails & screws around RCC chajjaS&Fascias etc., complete all as specified and as directed.

Taking down cement plaster on brick or stone walls, tiling & ceilings including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar ,complete all as specified and as directed.

M & L for keyed pointing in CM (1:3) to square rubble masonry Jodhpur type regular coursed built in cement mortar ,complete all as specified and as directed.

M & L for 15 mm thick rendering on stone masonry surfaces or surface other than fair face of brickwork or on one side of lathing finished fair and even without using extra cement in CM 1:6.,complete all as specified and as directed.

M & L for 15 mm thick rendering in CM 1:4 over stone masonry surfaces & finished fair & even without using extra cement with using integral water proofing liquid as per manufacturers instructions,complete all as specified and as directed.

M & L for 10 mm thick rendering in CM 1:4 over conc surfaces finished even & smooth as in ceilings ,complete all as specified and as directed.

Complete removal of existing treatment from walls for applying of periodical services.

M&L for Preparation of new plastered or unplastered surfaces of ceiling and applying three coats of white wash on ceiling surfaces complete all as specified and as directed.

M&L for preparation of old decorated ceiling surfaces plastered or unplastered, by brooming down or steel wire brushing, scrapping down moulds, moss and efflorescent salts and trading oil & greasy spots, including cornices etc and applying one coat of white wash on ceiling, complete all as specified and directed.

M&L for applying 2 mm thick wall care putty on wall surfaces including rubbing with sand paper to obtain a smooth surface and making good any undulations on the surfaces and applying two coats of oil bound distemper on wall surfaces as per manufacturer’s instruction, complete all as specified and directed. Note -i)- Rate are deemed to be included for scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures. ii)- OBD shall be in one or more colours/ shades all as approved by GE.

M&L for carrying out two coat of exterior grade plastic paint over new/old plastered /pointed surfaces of walls , RCC chajjas fascias roof projection etc of approved pattern ( Top Gun Compact / Stucco shade/pattern ) incl preparing the surfaces making good to depressions etc complete to obtain the desired finish all as per sample

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc 15 cm thickness (below or above ground level) and removal unserviceable materials, debris and rubbish to a distance out side MD land complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), and rubbish off the premises complete

M & L for 15-18 mm thick Udaipur green stone machine cut mirror polished laid in flooring over & including 15 mm thick screeding in CM 1:4 complete incl rubbing & polishing complete.( size of stone shall not be less than 58x58 cm), complete all as specified and as directed.

M&L for 18-20 mm thick Black granite stone as in cooking platforms , slabs for oval type WHB,sinks etc & the likes complete laid over & including 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipe / water supply pipes etc. , complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of size 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm (size & shape, shade and pattern as approved by GE), as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles over and including M&L 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and directed.

M&L for machine cut pre polished kota stone slab 20 to 25mm thick in floor laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over and including 15mm thick screed bed in CM 1:4, complete all as specified and as directed.

All as per item No. 34.00 here-in-above but as on vertical surface such i.e., skirting, dados and risers to step etc., over and including 10mm thick rendering in CM 1:3, complete all as specified and as directed.

Roughning surfaces of old concrete floor by picking,sweeping clean and washing down with water to remove dust.

M & L for PCC (1:3:6) type C2 using 40mm graded crushed stone aggregate as in foundation, filling and mass concrete complete all as specified and directed.

M & L for 50 mm thick Cement concrete type C1 -1:3:6 using 20mm graded stone agg as in plinth protection & finishing the surfaxe even & smooth without using extra cement

M & L for 25 mm thick Cement concrete type B-0 1:2:4 (12.5 mm graded aggregate) as in sub floors etc incl finishing the surface even & rough to receive screeding

M&L for glazed colour ceramic tiles of size 300X450X6-7 mm, as in vertical surface such as i.e. dado/skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over & including M&L 10mm thick backing coat in CM (1:3) complete all as specified and directed. Note :- The tiles shall be in one or more colour patterns incl highlighters all as approved & directed at site .

S & F in relacement 15mm bore CP brass bib cock screwed for iron pipe or ferrule and fixed complete all as specified and directed

S & F in relacement 15mm bore CP brass angular stop cock screwed for iron pipe or ferrule and fixed complete all as specified and directed

Demolition of existing WC floor including PCC/ tile flooring ,traps attached to WC , lean concrete ,plaster and removing all debrises off the site complete.

M&L for rendering 15mm thick in cement mortar (1:4) on wall/floor surfaces of sunken floor finished even and smooth with using WPC as per manufacturing instruction including Cleaning the surfaces of sunken floor using wire brush , brooming down and washing down with water to remove dust etc. complete all as specified and directed .

M&L for a layer of 50 micron thick polythene film pasted with the help of suitable adhesive complete.

M & L for PCC (1:5:10) type E2 with using 40 mm graded crushed stone aggregates as in sunken floor work complete .

S & F in relacement vitreous china squatting pan ,"Orissa pattern" white ,size 580x 410 mm with itegral foot rest , 'P' or 'S' trap , including connection to trap , and to flushing pipe , anti -syphonage pipe complete all as specified and directed.

S & F Gun-metal 20 mm, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed

S & F in relacement swivel shower of chromium plated including shower arm any colour for fixing with 15 mm pipe.

S&F in replacement stop valves cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union for pipe 15mm bore.(ISI mark) (concealed type)

S&F cast iron floor /Nahani trap 75 mm dia outlet , with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4)

S & F in relacement Light coloured (Ivory) vitreous china, wash hand basin suitable for counter sunk including swan neck 15 mm pillar tap, CP waste coupling ,chain and plug, 2 Nos PVC connection 15 mm size & 45-60cm long & PVC Waste coupling & flexible waste pipe complete all as directed.

S & F in relacement Vtreous China Pedestal pattern WC light coloured (Ivory) complete with best quality PVC coloured seat & cover alll as directed.

S & F in relacement PVC Valveless Low level flushing cistern 10 Ltr capacity dual flush type complete with float valve, syphon assembly etc complete. The colour of the cistern shall be as matching with the colour of the WC Pan

S&F vitreous china urinal long size white including urinal spreader, CP waste coupling and waste pipe/bottle trap complete all as specified and directed.

S & F in relacement Corner Glass shelf 250mm superior quality with CP tubular framing & brackets complete all as per sample.

S & F in relacement Corner Glass shelf 300mm superior quality with CP tubular framing & brackets complete all as per sample.

S&F high quality looking mirror 450x600 mm fancy type 5 - 6 mm thick bevelled edges fixed to wall with chromium plated screw with cup washers etc complete all as specified and as directed

S & F in relacement Tubular towel rail 20mm dia brass chromium plated `D' type 60cm long with bracket and fixed complete all as directed

S & F in relacement 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as directed

S & F in relacement 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors/wall complete all as directed

S & F in relacement 75 mm bore PVC (SWR) bends any radius with/with out oval acess door compete all as specified and directed

S & F in relacement 110 mm bore PVC (SWR) bends any radius with/with out oval acess door compete all as specified and directed

S & F in relacement 75 mm bore PVC (SWR) tee/branch piece any radius compete all as specified and directed

S & F in relacement 110 mm bore PVC (SWR) tee/branch piece any radius compete all as specified and directed

M&L for PVC (SWR) floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) for 75 mm bore of pipes

S&F in replacement curtain rod stainless steel finish of pipe 22 to 25 mm dia including Purpose made brackets trade pattern for decorative type curtain rods and Decorative finials (round type with mirror optic finish) trade pattern for decorative type curtain rods suitable for 22 to 25 mm dia curtain rods as per sample.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area not exc 1.5 Sqm each, complete all as directed.

Taking down chowkhats or frame with shutters (without taking of shutters from the frames) area exc 1.5 Sqm but not exceeding 4 Sqm each, complete all as directed.

Taking down steel windows/ vents & remove from site complete all as specified.

S&F factory made box type windows (steel) (BWM) with side hung shutter including cooler opening as shown in Drg No CEJZ/TD/20 sheet1/3 to 3/3 complete with glazing bars, dovetailed or welded, complete all as specified and as directed. Note : (i)-Both shutter (wherever applicable) will be jointed internally with flat iron of size 40 x 4mm and quoted rate deemed to include the cost component of the same. (ii)- Guard bar, Glass panes & wire cloth, Paint shall be measured and paid seperately.

All as per item No. 71.00 here-in-above, but without glazing bars

S&F Factory made steel ventilators with top hung shutters with or without glazing bar, including box type hinges, steel peg stay complete all as specified and as directed. Note:- Glass panes and wire cloth shall be measured and paid seperately.

M&L for fabrication of powder coated aluminium frame work as in frames for aluminium windows with or without rebate or for sliding windows(two track/three track ) , ventilators etc with louvers having suitable mechanism for tilting , U shaped fillets for securing Jallies etc & the likes complete all as per sample kept in GE Office & fixed in position, complete all as specified and as directed. Note : Glass panes in louvers & stainless steel wire cloth shall be measured & paid for seperately,

M&L for pre powder coated aluminium decogrill all as per sample fixed to aluminium framework of windows & ventilators, complete all as specified and as directed.

S & F 4 mm thick pin headed figured glass in small widths as in louvers of ventilators, complete all as specified and as directed.

Supply & fix 3mm thick sheet glass (ordinary quality) area n.exc 0.50 sqm each pane, fixed to steel frame complete oil putty in square including steel pin complete all as specified and directed

Supply & fix 3mm thick frosted (ordinary quality) area n.exc 0.50 sqm each pane, fixed to steel frame complete oil putty in square including steel pin complete all as specified and directed

S&F 35 mm thick flush shutters, solid core construction, with block board core, both faces covered with decorative prelaminated work with lipping/frame to match, complete all as specified and directed

S & F 30 mm thick 2nd class hard wood factory made Glazed and skeleon shutters open rebbated and prepared to receive glass, gouze, etc(without sash bar) edges of framing plain chamfered or rounded fitted with cut and mitered beats for securing glass etc size of members of shutter as specified in SSR part I Section 8 clouse 8.24 (a) complete

S & F Factory made single extruded WPC (wood polymer composite) solid plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum nd screw withdrawal strength of 1800 N (face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , odulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixing with stainless steel butt hinges of required ie with necessary full body threaded star headed counter sunk SS screws, all as per direction of engr-in-charge complete all as directed

S & F Factory made single extruded WPC (wood polymer composite) solid door/window/ceosetory windows & other frames/chowkkat of size 45x85 mm comprising of virgin polymer of K value 58-60 (suspension grade), calcium caronate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with mmiter joints after applying PVC solvent cement and screwed with full dody threaded star headed SS screws having minimum density of 650 kg/cum nd screw withdrawal strength of 2200 N (face) & 1100 N (Edge), minimum compressive strength 58 N/mm2 , modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category of being termite / borer proof, water / moiture proof and fire retardant and fixed in positin with suitable MS hold fast /lugs/SS dash fasteners f required dia and length complete, all as per direction of engr-in-charge complete all as directed

S&F anodised aluminium barrel tower bolts, 150 mm size stove enamelled black, with bright bolt and fixed

S&F stainless steel butt hinges 100mm size medium weight fixed with steel nut blots in PVC door frames & PVC shutters.

S&F anodised Aluminium handles 150 mm size D type with plate

S&F stainless steel wire cloth 0.36 mm nominal dia of wire & average width of appertuer 1.40 mm fixed to Anodised aliminium framework of windows / vents & door shutters etc complete.

M&L preparation of new or previously untreated steel surface of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over & including M&L single coat of red- oxide, zinc chrome primer complete all as specified and as directed.

M&L Preparation of new or previously untreated wood and wood based surfaces of any description otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over & including M&L single coat of pink primer complete all as specified and as directed .

M & L for preparation of old painted steel surfaces of any description otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint of any tint complete all as specified and as directed .

M&L for 75mm thick PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate), as in sub base to floor, complete all as specified and directed.

Supply and laying factory made chamfered edge cement concrete rubberised interlocking paver block, 60mm thick with 6 mm thick top layers of anti abrasive material of M-35 grade with any colour, design & pattern, & size/ shape, as approved by GE as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness made by table vibratory method using PU mould, laid in required colour & pattern over and including M&L 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified and directed.

M&L for chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick set and jointed and pointed in neat cement slurry in floor with grey cement and pigment over & including 15 mm thick cement screed bed in CM 1:6, complete all as specified and directed.

M & L for Machine made precast cement concrete Kerb stone blocks of approved shape size using Cement concrete 1:3:6 type C1 (20mm stone agg) laid alongside paths /hardstanding jointed & pointed in CM 1:4 all as directed by Engr-in-Charge

M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies and in shelves and the like including demolition of existing RCC, complete all as specified and directed.

M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed.

Use & waste of form work to soffits of flat, rough finished surfaces of concrete of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick(Horizontal or sloping), complete all as specified and directed.

S & F in relacement Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall ,fixed with self tapping screws, including dismantling old existing AC sheet & credit to contractor, complete all as specified and directed.

M&L for mild steel work in tubular trusses including special shaped washer etc complete using EWR induction butt weided Tubes conforming to I.S. 1161-1998 grade St 240, complete all as specified and directed.

Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and getting out in any type of soil ,complete all as specified and as directed.

Returning, filling in,including spreading, levelling, watering and well ramming in layers not exc 25 cm as in any type of soil, complete all as specified and as directed.

Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point

M & L for Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in Cement conc 1:4:8 type D2 using 40 mm graded stone agg .,complete all as specified and as directed.

M&L for salt glazed stoneware drain pipes 150mm bore, grade 'A' laid in trenches and jointed in CM(1:1) including taking down old UNSV pipe, complete all as specified and directed.

Demolition of stone / boulder masonry walling, built in cement mortar including all quoins, arches, pillars etc and removal unserviceable materials, debris, rubbish to out side MD land complete all as specified and directed.

M&L for squared rubble walling, Jodhpur type, regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6, complete all as specified and directed.

Extra over Jodhpur type stone masonry for hammer dressing to face beds & joints with max depression froom a straight edge not exc 20 mm

M & L for 5 cm thick machine cut Sand stone slabs in floor, sunshades, chajjas, shelves, cills, landings, cover stones, templates, etc n exc. 2m in length, punched dressed on face and along exposed edges, self faced on other side and set and pointed cement mortar 1:4. ,complete all as specified and as directed.

M & L for Cutting chases in stone walls , pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or sunshades, shelves, lintels, etc.; exc 10 cm but nexc 20 cm girth.

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

M & L for (concealed) point wiring complete with multistranded copper conductor 1.5 Sqmm PVC insulated unsheathed single core FRLS cable 1100 volt grade, confirming IS 694 & colour code in conduit system of wiring, drawn through in and including non-metalic PVC concealed (including Cutting Chases and make good the distrubed surfaces ) conduit of size 20 mm or med grade as required as site, totally concealed in walls / and surface on floors / ceiling or fixed on surface of walls / columns / beam / tie beam etc by means of saddles and clips etc incl all conduit accessories / fittings / junction boxes / inspection covers etc of heavy grade, ISI marked and sunk terminal boxes of CI or 16 SWG pressed steel housing, totally concealed in walls with 3mm thick industrial laminated sheet top cover, fixed flush with wall surface by means of brass screws and sunk / cup washers, for mounting of switches, sockets fan regulators etc incl 1.5 Sqmm FRLS PVC insulated, unsheathed flexible multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, all as specified, directed and shown on drgs for The rates of chase cutting on wall done concealed conduit and steel terminal boxes are included in the unit rates all as specified and directed by Engr-in-Charge.

One light point controlled by one, one way switch

One fan/ Exhaust Fan point controlled by one way switch.

one socket outlet 3 pin, 5 Amps on independent board, controlled by one no 5 Amp switch independent board.

One socket outlet 3 pin 5 amps on the same board controlled by one no 5 Amp switch.

All as per srl item no. 112.00 here-in-before but with 2.50 Sq mm FRLS copper wire with 4 Sqmm FRLS copper earth wire for indpendent 15 Amp point.

S&F Switch piano type, single pole, one way, 5/6 amps, 230 volts, complete all as specified and directed.

S&F Socket, two-in-one, 5 pin, 5 Amp, universal type, 230 volts, complete all as specified and directed.

S&F Switch piano type, single pole, one way, 15/16 amps, 230 volts, complete all as specified and directed.

S&F Socket, 6 pin, 5/16 Amp, multipurpose shutter type, 230 volts, complete all as specified and directed.

S&F Lamp holder, metal cased, bakelite body, 230 volts, complete all as specified and directed.

S&F LED lamp 9 W complete all as specified and directed by the Engineer-in-Charge.

S&F Ceiling rose, three terminals, bakelite body, 230 volts, complete all as specified and directed.

S&F stepped type electroic type fan regulator flush type on the existing pheolic laminated sheet etc. as rquired.

S&F LED light fitting 1 X 10 watt (2 feet), T -5 batten fitting, Desinged linear sleek aesthetic PVC housing, PC cover ensures soft an glare free lighting wide angle of 120º, upto (110 Lm/W) complete all as specified and directed by Engr-in-Charge.

S&F LED light fitting 1 X 20 watt (4 feet), T -5 batten fitting, Desinged linear sleek aesthetic PVC housing, PC cover ensures soft an glare free lighting wide angle of 120º, upto (110 Lm/W) complete all as specified and directed by Engr-in-Charge.

S&F of bldg security LED Light Luminaire of 35 Watts having IP 65 protection fiting made out of pressure die cast Aluminium housing, operating Voltage 140-270 Volts with in built surge protectore, toughened glass with and including GI pipe 40 mm bracket of 1.5 m in length(or bracket as approved by GE) including drilling holes, nuts & bolts 2 coats of red oxide primer on GI pipe and fixing with wall security light on building wall connecting cable complete all as directed.

Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP and current carrying capacity in the MCB DB complete with connection testing and commissioning.

Supply and fixing as MCB DB TPN (double door) 6 Way including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.

Supply and fixing 415V 10KA 'B' curve miniature circuit breaker (MCB) of TPN/FP 40 to 100 AMP and current carrying capacity in the DB complete with connection testing and commissioning.

S&F MCB, B Curve type, 10 kA, 6 to 32 Amp, Single Pole with over load and short circuit protection, complete all as directed.

Supply and fixing as MCB DB DD SPN 12 Ways including bus bar neutral link, earth bar and din rail, recessed with wall surfaces by chase cutting and making good surfaces of wall incl dismantling of old UNSV DB all as specified and directed by the Engr-in-Charge.

M&L for Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, nnected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in elevtrical plate no. 3 connected to Earthing test point all as ecified or indicated including testing on completion( Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover & GI 15 mm dia protection pipe upto 7.5 mtr. lead etc. complete )

Supply, laying testing in trenches LT UG XLPE insulated,armoured, heavy duty electric cable, aluminium coductor, 1100 V grade,croos sectional area 16 Sqmm 4 core all as diredted by Engr - in - charge Note : Earth work and brick work measured and paid separately

Supply and laying Un reinforced Precast concrete cable cover, class LV type-2 flat size 300 mm x 180 mm x 40mm all as directed

Supply and lay sand for sand cushioning for cable protection in trenches all as directed and specified in SSR Part - 1. Note:- for the purpose of payment punned thickness will be measured.

Supply and fix GI tubing medium grade of 40 mm dia for cable protection.

Material & labour for rewinding of ceiling fans,Painting of three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor and Complete all as specified and directed by Engr-in-charge. Note :- Old copper scrap shall be taken on charge.

Taking down and Refixing ceiling fan(M.D supply) and connecting up including provision of cable from ceiling rose or connector to fan & all specified and directed by Engr-in-charge.

M&L for replacement of sub main wiring with 2 runs of 6 Sqmm FRLS, PVC insulated, unsheathed and stranded copper conductor cable with and incl one run 6 Sqmm (nominal area) FRLS as earth wire, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn in to separate concealed medium grade, ISI marked, non metallic heavy duty PVC conduit 15 mm dia size incl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed. Note:- Two runs of 6 Sq.mm. and one run of 6 Sq.mm (earth wire) cable incuding one run of conduit pipe will be measured as one length including making good the disturbed surfaces.

Diva Infra (BID ID -3268418)

SNEH CORPORATION (BID ID -3268450)

D.K.CONSTRUCTION CO (BID ID -3268408)