REPAIR TO CERTAIN ROADS AND REPLACEMENT OF ROAD FURNITURE AT ARMY AREA BANAR JODHPUR UNDER GE BANAR

Amount

M&L for preparing black top surfaces of roads by brushing with wire brush for removing cracked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirt etc complete all as specified and directed..

M&L for repair to potholes any depth not exceeding 1 sqm each including sweeping free from dust and mud, or water scoring sunken surfaces in roads, paths etc cutting around edges to at least 25 mm in depth making good by filling in screened & graded road metal, watering and well ramming (including supply of road metal) complete all as specified and directed

Scarifying or picking graveled, macadam or bituminous macadam surface in area not exceeding 400sqm and not exceeding 50mm deep and removing where directed by Engr-In-Charge complete all as specified and directed

M&L for applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 10.0Kg per 10Sqm on unsurfaced surfaces ie., potholes etc complete all as specified and directed..

M&L for laying premixed bituminous macadam with 4% binder content using VG-30 paving bitumen by weight of total mix rolled and compacted to required gradient and camber using vibromax power roller of capacity 8 to 12 tonne complete all as specified and as directed.

M&L for applying evenly a tack coat with paving bitumen VG-10 grade at the rate of 5.0Kg per 10Sqm on old block top surfaces complete all as specified and directed..

M&L for bituminous premix semi dense asphaltic concrete 30mm consolidated thickness with 5.50% binder content by weight of total mix using paving bitumen VG-30 grade and laying with mechanical paver, rolled and compacted to required camber or gradient using 8 to 12 ton power roller complete all as directed and specified.

M&L for preparing bituminous road surfaces and painting 2.0mm thick lines, dashes, arrows, letters etc on roads, pavements and the like not exceeding 10cm wide on roads and pavements with retro reflective Thermoplastic road marking paint (of approved colour) confirming to BS- 3262-1989 by hot mixing method as per IS specifications, heating with gas, complete all as per manufacturers instructions, specified and directed.

M&L for 100mm thick (spread thickness) red bajri/ Moorum filling, spread, rolled and consolidated to required gradient alongside paved roads as in berms including watering & rolling complete all as specified and directed

S&F in repair solar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions complete all as specified and directed

S&F in repairs cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete. all as specified and directed

S&F Solar tubular delineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm), type B1 using 20mm graded stone aggregate complete all as specified and directed

JAGDISH PRASAD & CO