SBM 2.O

Earth work excavation and depositing on bank with an initial lead of10Mts. and lift of 2 Mts. in all soils including Labour charges etc.complete.

Filling with sand in trenches, sides of founddations and basement with initial lead in layers not exceeding 15 Cm thick, Consolidationg each deposited layer by watering and ramming inculuding cost and conveyance of water to work site and all operational, incidental, labour chargess, hire charges of T & P etc., complete for finished item work. (APSS NO. 309 & 310)

PCC (1:4:8) prop.(nominal mix) Using 40mm HG metal including cost and conveyance of all materials, mixing., lyaing, tamping, curing, labour charges etc.complete.

Supply and placing of M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

For Septic tank Slab

Providing high yield strength deformed HYSD steel bars Fe-415as per IS1786-1985 of 8mm to 40mm dia mtr cutting, bending to required sizes and shapes, placing in position with cover blocks approved size and binding wire of 20 SWG forming grill for reinforcement work as per approved design and conveyance of bars from approved sources to site of work including cost and convedyance of binding wire cover blocks operation, labour charges

Masonry work in CM (1:8) prop with Flyash Cement solid blocks 75kg/sq.cm of size 290mm*225mm*140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 75 kg/sqm for walls for Sub Structure

Plastering with CM (1:4) prop. 12mm thick two layers including cost and conveyance of all materials etc.complete.

Painting, Priming Coat on New Plastered Surface with Cement Primer after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.

Painting in all shades Grade-II two coats with approved colours including c&c of materials, including labour charges, etc. complete. (Grade II Asian/ Berger/ Nerolac/Indocem/PMCC/Essar) as per Plastering Qty.

Dadooing to walls with glazed red or white full body ceramic wall tiles of size 200 x 300 / 245 x 325 mm and thickness between 6 mm 1st quality conforming to IS:13711, IS:13712, IS: 13630 (Parts 1 to 15) of any colour and finish in all shades and designs set over a base coat of CM(1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistancy sread at the rate of 3.30 Kg of cement per One Square Meter and jointed wiyh neat White cement paste mixed with pigmant of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc. to site, all operational, incidental and labour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., complete for finished item of work.

Supply & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 580 mm x 440 mm with 4" CI outlet pipe of approved make as per ISI 2548 1963 with and PVC low level system with internal components & short bend: 10 Litres capacity Single flush, 32mm dia short CP bend, 15 mm PVC connections with brass union nuts and 12.70 mm (1/2")NP stop cock heavy duty (300 grams), complete including cost and conveyance of all materials to site, for finished item of work for all floors.

Supply & fixing white glazed European water closet with variety as approved by Engineer-in-charge, S" trap with 4" CI outlet pipe of approved make, plastic seat and lid for EWC and rubber buffers as per ISI 2548 1963 with lid PVC low level system with internal components & short bend: 10 Litres capacity Single Flush, 15 mm PVC connections with brass union nuts and 15 mm nominal size CP finish brass stop valve screw type with internal /external threaded heavy duty (300 grams), complete including cost and conveyance of all materials to site, for finished item of work for all floors.

Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/Esso or equivalent complete with standard CI brackets including wooden block: 450 x 300 mm -Single C.P. Pillar cock

Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

TBSP-H.I-01:Supplying and fixing of SWR PVC pipes (as per ISI standards) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges etc.complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326): Waste Water & Grey Waste Pipes and Vent Pipes & Rain Water Pipes

75 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

90 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm

Supply and transportation of 12 W +/-10% (>= 1200 Lumens) back lit LED Down Light Recessed / Surface mounting round / square with housing made of Powder coated Pressure die cast aluminium housing with extended heat sink, with Protruded high efficiency diffuser, IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. LUMINAIRE MAKE : Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec / FIEM / Arraystorm / GM / Goldmedal LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

Supply & Delivery and fixing of Feed back machines including transportation charges etc complete

Providing and fixing factory made extruded WPC (Wood Polymer Composite) solid white color board for cupboards and bathroom/kitchen cabinet/partitioning/wall panelling /wall cladding of required size comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge (SS butt hinges and SS screws shall be paid separately) - 18mm Thick

Provision towards Blue lighting, plumbing, sanitary works and Artistic painting and Sign boards etc.,