Repairing & Renovation of Girls & Boys Hostel Building For PM Shri Eklavy Model Residential School at Pardi Dist:- Valsad (Repairing of Door, Window, Colour Work,Brick Work, Sheet Roofing and other Misc. Works)

Name of work :-

Repairing & Renovation of Girls & Boys Hostel Building For PM Shri Eklavy Model

Residential School at Pardi Dist:- Valsad (Repairing of Door, Window, Colour Work,Brick

Work, Sheet Roofing and other Misc. Works)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Item Item of work Quantity Unit In figure Amount

1 Demolition of Brick work and stone masonry including stacking of 1.00 Cumt 550.40

serviceable materilas and disposal of unserviceable materials with

all lead and lift.(ii) In Cement Mortar.

2 Dismentling doors, windows, ventilators etc. (wood or steel) 376.00 Nos 187.71

shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and

lift.(ii) Not Exceeding 3 Sq.M. in area.

3 Dismentaling of sheet roofing including ridges, Hips,Valleys, 216.90 Sqmt 53.45

Gutters etc. stacking of serviceable materilas and disposal of

unserviceable materials with all lead and lift.(ii) A.C. sheet roofing.

4 Dismentaling tiled of stone floors laid in mortar including stacking 275.00 Sqmt 48.21

of serviceable materilas and disposal of unserviceable materials

with all lead and lift.

5 Brick work using common burnt clay building bricks crushing 0.70 Cumt 4295.99

strength not less than 35 Kg/Sq.cm. in super structure above plinth

level upto floor two level in cement mortar 1:6 (1cement : 6 fine

sand) (B) Conventional For Ground Floor

6 Brick work using common burnt clay building bricks crushing 0.70 Cumt 4336.18

strength not less than 35 Kg/Sq.cm. in super structure in cement

mortar 1:6 (1cement : 6 fine sand) (B) Conventional For First Floor

7 Providing 20 mm thick double coat mala cement plaster on interior 192.90 Sqmt 272.48

brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete. For Ground floor

8 Providing 20 mm thick double coat mala cement plaster on interior 146.90 Sqmt 299.20

brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete.For first floor

9 Providing 20 mm thick double coat mala cement plaster on interior 9.10 Sqmt 325.93

brick / concrete work for plastering comprising of base coat of

mm thick cement plaster in cement mortar (1 Cement : 4 coarse

sand) in rough finishing and 8 mm thick top coat of cement mortar

1:2 (1 Cement : 2 Coarse sand) finished with trovel including

scaffolding curing etc. complete. For second floor

10 Providing 10 mm. Thick cement plaster in single coat for plastering 75.30 Sqmt 140.95

on ceiling and soffits of stairs and finished even and smooth in :

(I) Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For

11 Providing 10 mm. Thick cement plaster in single coat for plastering 72.60 Sqmt 164.34

on ceiling and soffits of stairs and finished even and smooth in :

(I) Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For First

12 Providing 10 mm. Thick cement plaster in single coat for plastering 1.80 Sqmt 187.73

on ceiling and soffits of stairs and finished even and smooth in :

(I) Cement mortar 1:4 (1 cement : 4 sand) etc. complete.For

13 20 mm Thick sand faced Gutka cement plaster on walls for all 192.40 Sqmt 300.66

height above ground level consisting of 12 mm Thick backing coat

of c.m. 1:3 (1 cement : 3 sand) and 8 mm Thick finishing coat of

c.m. 1:1 (1 cement : 1 sand) with 1x1cm Groves at juction of

structure member etc. complete.all height

14 Wall painting (Two coats) with plastic emulsion paint of approved 6550.10 Sqmt 80.35

brand and manufacture on undecorated wall surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

15 Wall painting (Two coats) with plastic emulsion paint of approved 3592.40 Sqmt 85.76

brand and manufacture on undecorated ceiling surface to give an

even shade including throughly brushing the surface free from

mortar droppings and other foreign matter and sand papered

16 Wall Painting (Two coats) with weather proof acraylic emulsion 3846.80 Sqmt 114.53

(Apex or equivalent type) paint of approved brand and

manufacture and of required shade on exterior wall surface to give

an even shade over and including primery coat with Alkaly

resistance primer of approved brand after thoroughly brushing

surface to remove all dust and remains of loose powdered

material etc. copm. for all height

17 Providing and fixing Single shutter standard alluminium glass 348.00 Sqmt 3201.70

openable Casement windows having standard extruded colour

anodized alluminium section frame of approved tint of size 126 x

50 , Horizontal and Vertical member One shutter size 65 x 30 mm

for shutter inter lock with handle with 5 mm thick Transparent

tinted float glass for glazing fixed with Transparent Silicon gasket,

Lock Strip with Standard Extruded Colour Anodized Aluminum

Coted fittings and all required materials labours and equipments

as per detail drawing window as directed. For W

18 Providing and fixing window having extruded aluminum Colour 36.00 Sqmt 2156.35

anodized section frame main outer size 95.00 mm x 24.10 mm x

1.17 mm (Weight:-0.738/Rmt) horizontal two track and Vertical

member of size 92.00 mm x 31.75 mm x 1.50 mm (Weight:-

1.06/Rmt), with Two Glass shutters & One Shutter Mosquito Net

of horizontal member size 40mm x 18mm x 1.29mm ( @ wt.of

0.456Kg/mt), vertical member of size 40mm x 18mm x 1.29mm

with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings & fixtures and Lock Strip

transparent silicon sealant glass fixing to frame as per details etc

complete for window.W1,W2

19 Providing & Fixing in position standard extruded approved colour 98.00 Sqmt 1982.63

anodised Aluminum Ventilator with outer frame 65 x 25 mm

Stander Box Frame with 5mm thick Ground Glass Louvers and

Fixed Mosquito Net For ventilation including all required

materials, fixtures, fastenning, labours and equipments as per

detailed drawing as directed. For Ventilators V,V1,V2

20 Providing and fixing 35 mm thick flush door Single shutter, solid 102.30 Sqmt 3197.66

core with Shutter of Factory made & Stamped I.S 12823 Grade

one ,Type one ,melamine faced three layred resin Flushed Door

Having Decorative Lamination on both sides & 12 mm T.W.Beading

Around the Door,FROM HOLDING LICENCE FOR MINIMUM

YEARS .and stainless steel handle and necessary Locking system of

Godrej, zinc coated hinges ,fixtures & fastenings etc directed by

engineer in charge.D,D1,D2

21 P & L 60x60 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 275.00 Sqmt 917.25

treads of steps and landing laid on a bed of 12 mm thick cement

mortar 1:3(1-cement:3-coarse sand)finishing with flush pointing in

colour cement slurry etc. complete. Colour and Shade approved

by Engineer-In-Charge

22 P & L 30x60 cm. Glazed Tiles 6 mm thick in skirting risers of steps 954.00 Sqmt 1073.90

and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse

sand) and jointed with colour cement slurry

23 Providing and fixing Mirrar polished 18 mm thick Granite stone in 927.80 Sqmt 2481.57

Single piece with full round edge and polished of approved quality

in clading on Cill & Jambs and around the doors/ windows/

ventilation with 12 mm thick cement motor CM (1:4) and fixing

with cement slurry & adhesive including moulding of exposed

edges as directed by engineering in charge etc. complete.

24 Providing, laying and jointing in true line and level 160 diametre 100.00 Rmt 831.22

U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring, & fittings conforming to

ISI 14735-1999 of approved make for drainage system pipe line,

pipe shall be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of MS Z clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm

center to center or shall be concealed in walls as directed including

necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

25 Providing laying (to level or slopes) and jointing reinforced 150.00 Rmt 665.48

concrete Light duty non-pressure pipes I.S. class NP2 of the

following internal diameter with collars and butt ends prepared for

collar joints including testing of joints complete.(D) 300mm

26 Providing and fixing in position 300 mm high, 150 mm wide 300.00 No 707.00

English/Gujrati letters made from 1.0 mm thick stainless steel

sheet as directed by Engineer in charge with all necessary tools &

plants etc. complete.

27 Providing and fixing S.W. gully trap with C.I. grating brick masonry 6.00 No 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight (i) Square mouth traps (B)

150mm x 100mm size P or R type

28 Constructing brick masonry chamber for underground C.I. 3.00 No 3208.77

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 precast RCC cover

455mm x 610mm intenal dimensions with frame (R.C.C. top slabe

with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone

aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a

floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

29 Constructing brick masonry chamber for underground C.I. 3.00 No 3916.78

Inspection chamber and bends with briocks having croshing

strength not less than 35Kg. Cm2 in C.M. 1:5 C.I. cover with frame

(Light duty) 455mm x 610mm intenal dimensions total weight of

cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg. ) (R.C.C. top slabe with 1:2:4 mix (1-cement

:2- coarse sand :4-graded stone aggregate 20mm size) foundation

concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3

finished smooth with a floating coat of neat cement on walls and

bed concrete etc. complete.(i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

30 Extra over items for every additional depth of 0.1M. of part thereof 3.00 Each 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x

31 Extra over items for every additional depth of 0.1M. of part thereof 3.00 Each 264.86

beyond 450mm depth for Brick masonry chamber.(i) for 500mm x

32 Providing & fixing 25mm Thick cupboard of plywood Shutter size 499.00 Sqmt 2843.15

1.80 x2.10 mt. including 19 mm & 6mm thick allproof plywood

which BWR confirming to IS 710 designs & grooves as directed by

architectural With Teak wood Fram 25mm x 50 mm size including

lamination of 1.0 mm thick in single or double shade of plain or

texture finish as directed on all visible face including on teak wood

batten patti and 0.80 mm white lamination on all non visible faces

& remaining faces. Fixing by necessary S.S. Decorative

handle,S.S.stopper ,Magnet S.S. Hinges & Polishing of all teak

wood Framing good quality lock with necessary fixtures &

fasteners of standard make as per detail drawing and image also

including all labours as approved by engineer-in-charge etc.

33 Providing and fixing of Ridge flashing for roof panel shall be made 216.90 Sqmt 858.67

out of 0.5 mm thick pre coated GI sheet . The Precoated sheet shall

be of minimum 240 mpa steel grade confirming to IS 14246:1995

and shall have zinc coating of minimum 120 gsm as per IS:277:1992

, 5-7 microns epoxy primer on both side of the sheet and polyester

top coat 15-18 micron. The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches during

transportation. The ridge shall be fixed to the steel members by

pop rivet or self drilling/self stitching fastners @ maximum

mm c/c along length of capping/flashing etc complete.

Rupees Eighty Eight Lakh(s) Seventy Nine Thousand Nine Hundred Seventy Five And Paise Eighty

I/We am/are willing to carry out the work at………% above/below percent(Should be written in figures and

words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender 8879975.89 Estimated amount put to

Deduct :………% below Add :………% Above

In words : In words :

1 The Credit Value of Dismentalled Materials of Amount Rs.335820.00 (Rupees Three Lakh(s)

Thirty Five Thousand Eight Hundred Twenty Only) shall be recovered from the 1st Running Bill

of the Contractor.

2 The Contractor shall exhibit a board with detailed specification and details of work as directed

by the Engineer-In-Charge for which no extra payment shall be made.

3 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

4 GST and Income tax TDS will be deducted at a source while making payments of bills

5 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore

in R.C.C. items where there is a change as per actual mix design the cost of difference of

cement consumption have been deducted from the rate of original item at the rate of input

rate mentioned in all the tender.

6 GST will be paid extra as per Govt. amendment.

Deputy Executive Engineer

Signature of Bidder Valsad (R&B) Sub-Division

Executive Engineer

Valsad (R&B) Division,