Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.5 LAdmitted-Fee/PreQual/Technical/Finance | L1 | Admitted-Fee/PreQual/Technical/Finance | |
| 2 | L2₹1.6 L+₹3,371.07 (2.21%)Admitted-Fee/PreQual/Technical/Finance | L2 | Admitted-Fee/PreQual/Technical/Finance | |
| 3 | L3₹1.6 L+₹3,537.68 (2.32%)Admitted-Fee/PreQual/Technical/Finance | L3 | Admitted-Fee/PreQual/Technical/Finance |
| Sl No | Description | Qty | Unit | IBRAHIM K L2 | MANIKANDAN C P L1 | MANSOOR K L3 |
|---|---|---|---|---|---|---|
| 1.00TRUSS WORK | ||||||
| 1.00 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 3 | sqm | 355.27 ₹1,065.81 | 347.58 ₹1,042.74 Lowest | 355.65 ₹1,066.95 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.19 | cum | 8,497.09 ₹1,597.45 | 8,313.3 ₹1,562.9 Lowest | 8,506.32 ₹1,599.19 |
| 1.00 | OD524139/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 77.56 | sqm | 571.41 ₹44,319.13 | 559.05 ₹43,360.48 Lowest | 572.03 ₹44,367.22 |
| 1.00 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 509.31 | kg | 178.73 ₹91,028.08 | 174.86 ₹89,057.07 Lowest | 178.92 ₹91,124.85 |
| 1.00 | OD524145/2025-2026:(OD modified DAR 12.4.2) Providing ridges or hips width 60 cm or nearest overall width plain
Tile proffile / Traffold sheets 0.35 mm thick. sheet fixed with polymer coated J or L hooks or
bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete | 10.05 | metre | 244.14 ₹2,453.61 | 238.86 ₹2,400.54 Lowest | 244.4 ₹2,456.22 |
| 1.01 | OD524141/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc. complete | 20.1 | metre | 443.26 ₹8,909.53 | 433.67 ₹8,716.77 Lowest | 443.73 ₹8,918.97 |
| 1.01 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 13.76 | sqm | 151.67 ₹2,086.37 | 148.39 ₹2,041.25 Lowest | 151.83 ₹2,088.57 |
| 1.01 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | 11 | metre | 390.21 ₹4,292.31 | 381.77 ₹4,199.47 Lowest | 390.63 ₹4,296.93 |
Tender Value
₹1.7 L
EMD Value
₹4,232
Closing Date
9 Oct 2026, 3:00 pmClosed
Assistant Engineer
Assistant engineer LIDEW Section Thirumittacode gramapanchayath
Thirumittacodu GP Pro.No. 249/26 Irumbakasseri Anganavadi Rennovation 2025-26
2026_LSGD_874926_1
ET1/08/2026-27/AE/LSGD/TMCD
Open Tender
Civil Works - Roads
Item Rate
180 days
Thirumittacode
Please refer Tender documents.
7 documents required · 7 mandatory
₹555
Yes
₹4,232
Yes
12 Oct 2026
1 Oct 2026
12 Oct 2026
1 Oct 2026
9 Oct 2026
1 Oct 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1TRUSS WORK | |||||
| 1.001 | 4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns | 3 | sqm | - | - |
| 1.002 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.19 | cum | - | - |
| 1.003 | OD524139/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch ofcorrugation as approved by Engineer-in-charge) 0.35 mm (+0.05%), total coatedthickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side. of the sheet and polyester top coat 15-18 microns.Sheet should have protective guard film of 25 microns minimum to avoid scratchesduring transportation and should be supplied in single length upto 12 metre or as desiredby Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws ofsize (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical orcurved surfaces, excluding the cost of purlins, rafters and trusses and including cutting tosize and shape wherever required. | 77.56 | sqm | - | - |
| 1.004 | 10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes | 509.31 | kg | - | - |
| 1.005 | OD524145/2025-2026:(OD modified DAR 12.4.2) Providing ridges or hips width 60 cm or nearest overall width plain
Tile proffile / Traffold sheets 0.35 mm thick. sheet fixed with polymer coated J or L hooks or
bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete | 10.05 | metre | - | - |
| 1.006 | OD524141/2025-2026:Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc. complete | 20.1 | metre | - | - |
| 1.007 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work | 13.76 | sqm | - | - |
| 1.008 | 50.18.7.6.2:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing . This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 6 Kgf/cm2 - Internal work- Exposed on wall | 11 | metre | - | - |
stage.html
html • 0.02 MB
finance_1485287.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.29 MB
FOT.pdf
Tender Documents • 0.25 MB
nitsbd.pdf
Tender Documents • 0.97 MB
BOQ_1485287.xls
BOQ • 0.30 MB
AFFI.pdf
Tender Documents • 0.23 MB
PA.pdf
Tender Documents • 0.25 MB
epayment.pdf
Tender Documents • 0.23 MB
inpact.pdf
Tender Documents • 0.23 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .