Construction of 620 Capacity Atal kala Bhawan in Madhubani District for the year-2026-27 (With electrification work)

Name of Work - Construction of 620 capacity ATAL KALA BHAVAN MADHUBANI

GENERAL ABSTRACT OF COST

Sl. No. Particulars Estimated Amount (Rs.)

1 Electrical Work 63518523.00

Sl. No. Particulars Estimated Amount (Rs.)

1 Construction cost for Main Building 96466891.00

2 PHE and Sanitation Work 1711055.00

3 External Sewage 2068634.00 77335

4 Septic tank 2Unit 483253.00

5 Cost for Approach Road, Campus Road & Campus Development Work 7254974.00

6 Boundary Wall 8324179.00

7 Boring 2 Unit 339517.00

8 Rain Water Harvesting 88709.00 -164877191

9 Fire Fighting 4457149.00

10 Main Gate 1031751.00 Non Shedule

11 Landscape & Horticulture works 1856016.00 Fiurniture 25241093

12 UGT (70 KL) 1182601.00 Boring 47622 #REF!

13 Parking Shed (3-Unit) 2827597.00 Fire 843970

14 SERVICE BLOCK 5379977.00 Fountain 783000

16 Fountain Work 783000.00 #REF!

18 Schedule Item 133472303.00

20 APPLY CORRECTION FACTOR 0.982 IN SCHEDDULE ITEMS 131069802.00 81200

23 Add Contigency @1 % Upto 1 Crore of Sub Total 100000.00

24 Add Contigency @0.5 % Of Rest Amount 770036.00

26 SUB TOTAL 164989272.00

27 Electrical Work 63518523

BILL OF QUANTITY

BUILDING DIVISION MADHUBANI

Name of work :- Construction of 620 Capacity Atal kala Bhawan in Madhubani District for the year-2026-27 (With electrification work)

AMOUNT OF B.O.Q 227141394

EARNEST MONEY 3271500

TIME OF COMPLETION - 15 Months

S.No BCD SOR 2022/ DSR/MR ITEMS OF WORK Qty Unit Rate Amount

1 2.6 Earth work in excavation over areas (exceeding 30 cm in depth. 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50 m and lift upto 1.5 m; disposal earth to be levelled and neatly dressed.

2 2.25(A) Excavating, supplying and filling of local earth (including royalty but excluding cairriage cost) by mechanical transport upto a lead of 3km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. If local earth is available at more than 3 km lead the actual lead must be approved by compitent authority. cairraiage of material will be paid seperately and calculated after deducting initial lead. 881.79 Cu-m ₹ 411.70 ₹ 363,033.00

3 2.8.1 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. 3520.14 Cu-m ₹ 360.70 ₹ 1,269,713.00

4 2.27.1 Extra for every additional lift of1.5m or pan thero of in all kind of soil etc all complete job 968.78 Cu-m ₹ 49.40 ₹ 47,857.00

5 2.26 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth: consolidating each deposited layer by ramming and watering lead 1722.84 Cu-m ₹ 123.90 ₹ 213,459.00

6 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 7343.01 Cu-m ₹ 287.30 ₹ 2,109,647.00

7 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 5678.58 Sqm ₹ 283.30 ₹ 1,608,742.00

8 11.73 Providing designation 100 A one brick EDGE soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, etc all complete jobs. 2309.30 Sqm ₹ 444.80 ₹ 1,027,175.00

9 4.1.3 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) 450.76 Cu-m ₹ 3,998.10 ₹ 1,802,172.00

10 4.1.8 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level. 1:4:8(1 Cement: 4 coarse sand:8 graded stone aggregate 20 mm nominal size) 3.00 Cu-m ₹ 2,975.20 ₹ 8,926.00

11 4.12 Extra for providing and mixing water prooding material in cement concrete work in the proportion recommended by the manufacturers. 439.00 per 50 kg cement ₹ 57.16 ₹ 25,093.00

12 4.6.1 Providing and fixing at or near ground level precast cement concrete in kerbs, edgings etc. as per approved pattern and setting in position with cement mortar 1:3 (1 cement : 3 coarse sand), including the cost of required centering, shuttering complete. 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). 17.52 cum ₹ 3,732.20 ₹ 65,392.00

13 5.2.2 Reinforced cement concrete work in wall (any thickness), includingattached pilasters, buttresses, plinth and string courses, fillets,columns,pillars,piers, abutments, posts and struts, etc. upt floor five levelexcluding cost of centring, shuttering, finishin and reinforcement. 1:1:5:3(1 cement: 1.5 coarse sand:3 graded stone aggregate 20mm nominal size) 6.02 Cu-m ₹ 5,670.00 ₹ 34,133.00

14 5.33.1.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All work upto plinth level + Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 265.24 Cu-m ₹ 5,063.40 ₹ 1,343,001.00

15 5.33.2.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All works above plinth level upto floor V level Walls columns, pillars, posts cind struts 60.44 Cu-m ₹ 5,863.20 ₹ 354,395.00

16 5.33A.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering, finishing and reinforcement, M-20 grade reinforced cement concrete 41.00 cum ₹ 4,756.90 ₹ 195,033.00

17 5.33A.1 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All work upto plinth level + Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 1035.08 cum ₹ 4,921.40 ₹ 5,094,028.00

18 5.33A.2 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All work upto plinth level + Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 242.95 cum ₹ 5,458.00 ₹ 1,325,994.00

19 5.33A.2.2 + 5.33B.1 Providing and laying in position machine batched, machine mixed and machine vibrated design mix cement concrete of specified grade for reinforced cement concrete structural elements, excluding the cost of centring, shuttering finishing and reinforcement, M-20 grde reinforcd cement concrete All work upto plinth level + Proiding M-25 grade R.C.C. instead of M-20 grade R.C.C. 890.38 cum ₹ 5,841.70 ₹ 5,201,345.00

20 16.75 Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-incharge. (The panel shuttering work shall be paid for separately). (Note:- Cement content considered in this item is @ 330 kg/cum. 461.86 cum ₹ 5,842.70 ₹ 2,698,504.00

21 16.91 Providing and laying factory made chamfered edge Cement Concrete paver blocks In foot path, park & lawns driveway or light & traffic parking etc. of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of course sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, all complete as per anufacturer's specifications & direction of Engineer- in-Charge

16.91.2 80mm thick Cement concrete paver block of M-30 grade with approved colour, design & pattern. 1146.04 sqm ₹ 778.00 ₹ 891,622.00

22 5.9 Centring and shuttering including strutting, propping etc. and removal of form for.

b) 5.9.2 Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 164.00 sqm ₹ 375.10 ₹ 61,516.00

c) 5.9.3 Suspended floors 3628.30 Sqm ₹ 437.50 ₹ 1,587,380.00

e) 5.9.5 Lintels, beams, plinth bams, 6906.08 Sqm ₹ 404.70 ₹ 2,794,890.00

23 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

24 6.1A Brick work with bricks of class designation 100A in foundations and plinth in :

6.1.14A Cement mortar 1:6 (1 cement: 6 coarse sand ) - 250 mm th Brick work 7.59 cum ₹ 4,819.90 ₹ 36,583.00

25 6.1C Brick work with bricks with fly ash bricks as per IS 12894(2002) & 3495 in foundation and plinth in : 0.00

6.1.12C cement mortar 1:4 (1 cement : 4 coarse sand) 28.42 cum ₹ 5,116.30 ₹ 145,405.00

26 6.1.12/1 Brick work with bricks of class designation 100A in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) Extra for Brick work in superstructure above plinth level upto floor V cum 3.32 Cu-m ₹ 5,017.90 ₹ 16,659.00

27 6.1.14A+6.3A P/V 100A B/W (1:6) In S/S level etc all complete jobs. 21.08 Cu-m ₹ 5,662.10 ₹ 119,380.00

28 6.1.14C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) 667.61 Cu-m ₹ 4,923.00 ₹ 3,286,659.00

29 6.1.14C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1:6 (1 cement: 6 coarse sand ) + Extra tor Brick work in superstructure above plinth level upto floor V cum 690.51 Cu-m ₹ 5,765.20 ₹ 3,980,917.00

30 6.1.12C + 6.3C Brick work with fly ash bricks as per IS 12894 (2002) & IS 3495 in foundations and plinth in : Cement mortar 1.:4 (1 cement: 4 coarse sand ) + Extra tor Brick work in superstructure above plinth level upto floor V cum 73.13 Cu-m ₹ 5,958.50 ₹ 435,769.00

Plaster and finishing work

31 13.11.4 Providing 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 7582.50 Sqm ₹ 141.50 ₹ 1,072,923.00

32 13.11.1+13.26 Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) 3.35 Sqm ₹ 204.80 ₹ 686.00

33 13.26 Neat cement punning 206.00 Sqm ₹ 40.50 ₹ 8,343.00

34 13.11.1 Cement plaster in course sand 12 mm cement plaster of mix: 1:3 (1 cement:3 coarse sand) Neat cement punning 90.00 sqm ₹ 164.30 ₹ 14,787.00

36 13.12.4 15 mm cement plaster on rough side of single or half brick wall of mix. 1:6(1 cement: 6 coarse sand ) 175.61 Sqm ₹ 162.80 ₹ 28,589.00

37 13.24.2 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 2206.60 Sqm ₹ 125.60 ₹ 277,149.00

38 13.24.1 6 mm cement plaster to ceiling of mix : 1:3(1 cement: 3 coarse sand) 33.00 Sqm ₹ 131.30 ₹ 4,333.00

39 13.17.1 12 mm cement plaster 1:3( 1 cement: 3 coarse sand) finished with a floating coat of near cement 348.00 sqm ₹ 203.60 ₹ 70,853.00

40 13.18 15 mm cement plaster 1:3 (1 cement: 3 coarse sand ) finished with a floating coat of neat cement on the rough side of single or half brick wall. 1913.30 Sqm ₹ 229.30 ₹ 438,719.00

41 13.12.1+13.39.2 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade: & With ready mixed zinc chromate yellow primer of approved brand and manufacture on steel galvanized iron/steel works 79.78 sqm ₹ 663.20 ₹ 52,910.00

42 13.40A Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. 66.47 sqm ₹ 127.90 ₹ 8,502.00

43 13.79.1 Finishing walls with water proofing cement paint of approved brand and manufacture and of required shade to give an even shade 1250.67 sqm ₹ 81.20 ₹ 101,555.00

44 13.82.1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:New steel work (two or more coats) 351.36 sqm ₹ 83.50 ₹ 29,339.00

45 6.47A Providing 250mm wide brick drain in cement mortar (1:6) with av. 150mm. Clear depth and 250mm apron including cost of E/W. involved with 75mm cement concrete (1:4:8) over one brick designation 100-A flat soling in proper grade and slope at the base.the drain duly. plastered in CM. (1:3) with punning over exposed surface all complete as per building specification and direction of E/l, 455.73 mtr ₹ 1,087.90 ₹ 495,791.00

46 13.116 Forming groove of uniform size from 12x12 mm and upto 25x15 mm in plastered surface as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repairs to the edges of plaster panel and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. 1817.00 mtr ₹ 47.10 ₹ 85,581.00

47 13.80A.2 Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 10834.28 sqm ₹ 105.40 ₹ 1,141,933.00

48 13.45.1 Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/ 10 sqm) over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm 66.47 sqm ₹ 215.20 ₹ 14,304.00

49 13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade :New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 305.40 sqm ₹ 137.00 ₹ 41,840.00

50 13.48.1 Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications. Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 10834.28 sqm ₹ 117.30 ₹ 1,270,860.00

51 13.94.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: incliding priming coat 251.28 sqm ₹ 116.50 ₹ 29,274.00

52 8.2.2.1+8.3.2 Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms,vanity counters, window sills, facias and similar locations, ofrequired size,approved shade, colour andtexture laid over 20 mmthick base cement mortar 1:4 (1 cement : 4coarse sand), jointstreated with white cement, mixed with matching pigment, epoxytouch ups,including rubbing, curing,moulding and polishing toedges to give high gloss finish etc. complete at all levels. 13.50 Sqm ₹ 4,503.00 ₹ 60,791.00

53 11.26.1 Kota stone slab flooring over 20 mm (average ) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete . Base with 1:1:1 (1 lime : 1 surkhi: 1 coarse sand ) / 1:4 (1 cement: 4 coarse sand ) 192.31 Sqm ₹ 1,252.70 ₹ 240,905.00

54 11.27 Kota stone slabs 20 mm thick in risers of steps skirting. Dado & pillars laid on 12 mm (average (thick cement mortar 1:3 (1 cement: 3 coarse sand ) and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. Details of cost for 10 sqm 15.83 Sqm ₹ 1,334.90 ₹ 21,135.00

55 11.55.1 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 412.45 Sqm ₹ 2,147.70 ₹ 885,819.00

56 8.3.2 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 621.00 m ₹ 260.10 ₹ 161,522.00

57 8.5 Extra for providing opening of required size & shape for wash basins/kitchen sink in kitchen platform. Vanity counters and similar location in marble/granite/stone work including necessary holes for pillar taps etc. including rubbing,moulding and polishing of cut edges etc. complete. 24.00 Each ₹ 428.20 ₹ 10,277.00

58 11.36 Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy , bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 742.73 Sqm ₹ 795.00 ₹ 590,472.00

59 11.37 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of ist quality conforming to IS : 15622 of approved make in colours such as white , Ivory , Grey , Fume Red , Brown , laid on 20 mm thick Cement motar 1:4 (1 cement: 4 coarse sand ) including pointing the joints with white cement and matching pigment etc., complete. 186.75 Sqm ₹ 686.80 ₹ 128,260.00

60 11.41.2 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete. 1779.51 Sqm ₹ 1,638.80 ₹ 2,916,259.00

61 11.46.2 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), including grouting the joint with white cement & matching pigments etc. complete. 154.80 Sqm ₹ 1,191.80 ₹ 184,491.00

62 11.34 38 mm thick parquet (wood block) flooring of 1st class teak wood laid over 25 mm thick levelling layer of cement concrete 1:2:4(1 cement:2 coarse sand:4 store aggregate 10 mm nominal size) to be paid separately coated with a thin layer of hot bitumen (blown type) @ 2.45 kg per sqm. including fixing blocks in position after dipping in hot bitumen (blown type) upto half depth,planed,levelled smooth and finished complete 893.56 Sqm ₹ 7,936.30 ₹ 7,091,536.00

63 10.12.1 Providing and fixing steel glazed doors, windows and ventilators of standard rolled steel sections, joints mitered and welded with 15x3 mm lugs 10 cm long with steel lugs embedded in cement concrete blocks 15x10x10 cm of 1:3:6(1 cement: 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) or with wooden plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required, including providing and fixing of glass panes with glazing clips and special metal-sash putty of approved make complete including applying a priming coat of approved steel primer; excluding the cost of metal beading and other fitting except necessary hinges or pivots as required. 17.82 sqm ₹ 3,038.90 ₹ 54,153.00

64 10.15.2.1 Providing and fixing pressed steel door confirming IS code 4351 manufactured from commerical mild steel sheet of 1.25 mm thickness including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50 x 25 mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechnical means, adjustable lugs with split end tail to each jamb including steel butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C 305.85 mtr ₹ 432.60 ₹ 132,311.00

65 9.1.1 Providingwoodworkinframesofdoors,windows,clerestorywindowsandotherframes,wroughframedandfixedinpositionwithhold fast lugsor with dash fasteners of requireddia & length (holdfast lugsor dash fastener shall be paid for separately). 0.35 cum ₹ 120,527.00 ₹ 41,943.00

66 9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type,core of block board construction with frame of 1 st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws 153.04 Sqm ₹ 2,845.60 ₹ 435,505.00

67 21.18 Providing and fixing 12 mm thick frameless toughened glass doorshutter of approved brand and manufacture, including providingand fixing top & bottom pivot & spring type fixing arrangementand making necessary holes etc. for fixing required door fittings,all complete as per direction of Engineer-in-charge (Door handle,lock and stopper etc.to be paid separately). 3.38 Sqm ₹ 5,143.00 ₹ 17,358.00

68 9.147D.4 Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.Three track three panels sliding window with fly proof SS wire mesh (Two nos. glazed & one no. wire mesh panels) made of (small series) frame 92 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area of window upto 1.75 sqm). 131.22 Sqm ₹ 9,083.30 ₹ 1,191,911.00

69 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. 2122.20 kg ₹ 144.50 ₹ 306,658.00

70 9.48.2 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc 3897.90 kg ₹ 161.10 ₹ 627,952.00

71 21.1.2.1 Providing and fixing Aluminium work for door, window, etc. for fixed portion. -do- 502.03 kg ₹ 447.20 ₹ 224,508.00

72 S2631 Providing and fixing Aluminium work for door, window, etc. for fixed portion. -do- 59.06 Sqm ₹ 1,277.50 ₹ 75,453.00

73 9.60.1 Providing and fixing Ms double acting spring hinges. -do- 150 mm 4.00 each ₹ 250.90 ₹ 1,004.00

74 16.9 Providing and laying tactile tile. -do- 150 mm 17.99 Sqm ₹ 1,464.30 ₹ 26,341.00

75 10.32.2 Steel work welded in built up sections/framed worK including cutting hoisting, rixing in position and applying a priming coat of approved steel primer using structural steel, etc. as required In gratings, frames, guard bar, ladders, railings, brackts. gates & similar works.. 1530.84 kg ₹ 114.60 ₹ 175,434.00

76 21.3.2 Providing and fixing glazing in aluminium door, window,ventilatorshutters and partitions etc. with EPDM rubber / neoprene gasketetc. complete as per the architectural drawings 71.78 Sqm ₹ 1,115.10 ₹ 80,046.00

77 10.36 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, ( for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts,fasteners etc.). 966.70 kg ₹ 546.80 ₹ 528,592.00

78 10.3 Providing and fixing in position collapsible steel shutters with vertical channes 20x10x2 mm and braced with flat iron diagonals 20x5 mm size with top and bottom rail of T-tron 40x40x6 mm with 40 mm dia steel pulleys complete with bots.nuts locking arrangement stoppers handies including applying a priming coat of approved steel primer. 27.54 Sqm ₹ 6,303.40 ₹ 173,596.00

79 10.6.1 Supplying and fixing-rolling shuters of approved make.made of required size of M.S.Iaths interlocked together through their intire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arragements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 48.37 Sqm ₹ 2,673.70 ₹ 129,322.00

80 10.7 Providing and fixing ball bearing for rolling shutters 48.37 Sqm ₹ 424.20 ₹ 20,518.00

81 9.96.1 Providing and fixing aluminium sliding door bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: 83.00 Each ₹ 235.50 ₹ 19,547.00

82 9.97.1 Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete: 139.00 Each ₹ 111.40 ₹ 15,485.00

83 9.101.2 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper 77.00 Each ₹ 60.80 ₹ 4,682.00

84 9.100.1 Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: 165.00 Each ₹ 57.10 ₹ 9,422.00

85 9.78 Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete 12.00 Each ₹ 920.40 ₹ 11,045.00

86 9.98 Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. 36.00 Each ₹ 78.40 ₹ 2,822.00

87 9.23 Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of shutters (overall area of door shutter to be measured) 86.50 sqm ₹ 401.40 ₹ 34,721.00

88 9.40.1.2 Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: 2nd class teak wood 289.80 mtr ₹ 184.60 ₹ 53,497.00

89 10.29 Providing and fixing bright finished brass peg stays 300 mm long of minimum weight 330 gms.to side hung steel windows with necessary welding and machine screws etc. complete 24.00 Each ₹ 182.70 ₹ 4,385.00

90 10.5.1 Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3mm MS gusset plates at the junction and corners.all necessary fittings complete jncluding applying a priming coat of approved steel primer. 11.03 sqm ₹ 3,653.00 ₹ 40,274.00

91 10.18 Providing and fixing circular/hexagonal cast iron or M.S sheet box for ceiling fan clamp 140 mm internal dia, 73 mm height, 5 mm thick rim bottom and top lids, 1.5 mm thick M.S sheet with its top surface hacked for proper bonding top lid shall be screwed into the cast iron box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamps shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. 150.00 Each ₹ 165.40 ₹ 24,810.00

92 12.78.2 Providing and fixing on wall face unplastidsed- PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion. 791.46 mtr ₹ 257.50 ₹ 203,801.00

93 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised- PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

b) 12.79.2.2 110 mm Single pushfit coupler 15.00 each ₹ 374.60 ₹ 5,619.00

c) 12.79.3.2 Single tee with door 110x110x110mm 60.00 each ₹ 193.40 ₹ 11,604.00

94 12.80.2 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete 193.00 Each ₹ 182.72 ₹ 35,265.00

MiscleniousWork

95 20.3A.1 Making 25 cm (10") dia bore up to 4 mtr depth below ground with hand auger of approved quality in ordinary soi! (vide classification of soil item A ) true to plumb and without eccentri city in any stage of operation and disposal of the excavated earth up to 50 mtr , Lead in eluding all lifts , all complete as per approved disign and direction of E/l Details of cost for 4 piles of 4 m= 16 mtrs depth ) 21.34 M ₹ 178.30 ₹ 3,805.00

96 12.39 Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 mx1 mx400 micron, finished 12 mm cement plaster 1:3 (1 cement:3 coarse sand) and a coat of neat cement rounding the edges and making and finishing the outlet complete 42.00 Each ₹ 189.40 ₹ 7,955.00

97 26.26.2 Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing '@ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in- Charge. With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles 407.25 sqm ₹ 1,517.40 ₹ 617,963.00

98 12.50 Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoidscratches during transportation and should be supplied in single lengthupto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 532.33 sqm ₹ 625.10 ₹ 332,759.00

99 10.16.1 Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete Hot finished welded type tubes 50633.48 kg ₹ 123.90 ₹ 6,273,489.00

100 12.9.1 Providing and fixing 15 cm wide 45 cm over all semi circular plain G.S. sheet gutter with iron brackets 40x3 mm size bolts, nuts and washers etc. including making necessary connections with rain water pipes complete. 0.80 mm thick with zinc coating not less than 275 gm/m2 360.00 mtr ₹ 577.40 ₹ 207,864.00

101 12.57X Providing and fixing thermal insilation with resin bonded fiber glass wool conforming to IS: 8183 having density 24 kg/m3, 50 mm thick 1024.71 SQM ₹ 259.80 ₹ 266,220.00

102 12.6.2 Providing ridges or hips of width 60 cm overall width plain G.S. sheet fixed with G.I.J. or L hooks . Bolts and nuts 8 mm dia. G. 1. limpet and bitumen washers complete. . 0.63 mm thick with zinc coating not less than 275 gm/m2 180.00 mtr ₹ 527.70 ₹ 94,986.00

103 12.13 Extra for providing and fixing wind ties of 40x6mm flat iron section. 360.00 mtr ₹ 147.80 ₹ 53,208.00

104 12.67B.1 Extra for making chamfered edges of beading Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer-in charge With Type N-Normal 895.69 sqm ₹ 241.80 ₹ 216,577.00

Water proofing treatment work

105 12.55x Providing and fixing Heat Resistant Terrace Tiles (300 mm x 300 mm x 20 mm) with SRI (solar refractive index) > 78, solar reflection > 0.70 and initial emittance > 0.75 on waterproof and sloped surface of terrace, laid on 20 mm thick cement sand mortar in the ratio of 1:4 (1 cement : 4 coarse sand) and grouting the joints with mix of white cement & marble powder in ratio of 1:1, including rubbing and polishing of the surface upto 3 cuts complete, including providing skirting upto 150 mm height along the parapet walls in the same manner. 1486.09 sqm ₹ 1,101.60 ₹ 1,637,080.00

106 22.3 Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C. kitchen and the like consisting of: (i) 1st course of applying cement slurry @ 4.4 kg/sqm mixed with water 201.37 sqm ₹ 480.60 ₹ 96,779.00

107 13.82B1 Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacture's specifications including appropriate priming coat, preparation of surface, etc. complete 308.50 sqm ₹ 120.50 ₹ 37,174.00

108 22.19.1 Providing and laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer, 3 mm thick water proofing membrane, black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @0.40 litre/ sqm by the same membrane manufactured of density at 25° C, 0.87 - 0.89 kg/ litre and viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butane torch and sealing all joints etc., and preparing the surface complete. The vital physical and chemical parameters of the membrane shall be as under : Joint strength in longitudinal and transverse direction at 23°C as 350/300 N/5 cm. Tear strength in longitudinal and transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147. The laying of membrane shall be got done through the authorised applicator of the manufacturer of membrane. 219.92 sqm ₹ 443.10 ₹ 97,447.00

Aluminum and Glazing

109 26A.3 Providing, assembling and supplying vision glass panels (IGUs) comprising of hermetically-sealed 6-12- 6 mm insulated glass (double glazed) vision panel units of size and shape as required and specified, comprising of an outer heat strengthened float glass 6mm thick, of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade, an inner Heat strengthned clear float glass 6mm thick, spacer tube 12mm wide, dessicants, including primary seal and secondary seal (structural ilicone sealant) etc. all complete for the required performances, as per the Architectural drawings, as per the approved shop drawings, as specified and asdirected by the Engineer-in-Charge. The IGUs shall be assembled inthe factory/ workshop of the glass processor. (Payment for fixing of IGU Panels in the curtain glazing is included in cost of item No.26.2)For payment, only the actual area of glass on face # 1 of the glass panels (excluding the areas of the grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, + 12mm Airgap + 6mm Heat Strengthened clear Glass of approved make having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 degree K etc. The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement. 71.61 sqm ₹ 3,377.50 ₹ 241,863.00

110 21.4.1 Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors,embedding in floors as required and making good 8.00 Each ₹ 2,283.80 ₹ 18,270.00

111 21.16.2 Providing and fixing aluminium round shape handle of outer dia 100mm with SS screws etc. complete as per direction of Engineer in-charge 8.00 Each ₹ 86.60 ₹ 693.00

112 21.13 Providing and fixing Brass 100mm mortice latch and lock with 6 levers without pair of handles (best make of approved quality) for aluminium doors including necessary cutting and making good etc. complete. 8.00 Each ₹ 365.20 ₹ 2,922.00

113 21.10 Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications,drawings and direction of Engineer-in-charge complete. 18.36 sqm ₹ 3,698.50 ₹ 67,904.00

114 CPWD 16.21 ENGRAVING LETTERS IN HARD STONE 10000.00 NOS ₹ 10.55 ₹ 105,500.00

115 1007B Supplying and fixinf steel chanels etc 0.87 QT ₹ 5,640.00 ₹ 4,907.00

116 Carriage of Material

117 Extra Cost of Material

118 17.1.1 Providing and fixing water closet squatting pan (Indian type W.C.pan ) with 100 mmsand cast Iron P or S trap, 10 litre low fixtures complete, including cutting and makinggood the walls andlevel white P.V.C. flushing cistern, including flush pipe, withmanually controlled device (handle lever) onforming to IS : 7231, with all fittingsand floors wherever required : White Vitreous china Orissa pattern W.C. pan ofsize 580x440 mm with integral type foot rests 20.00 Each ₹ 4,470.90 ₹ 89,418.00

119 17.81 Providing and fixing floor mounted, white vitreous china single piece, each 14168.20double traps syphonic water closet of approved brand/make, shape,size and pattern including ntegrated white vitreous china cistern ofcapacity 10 litres with dual flushing system, including all fittings andfixtures with seat cover, cistern fittings, nuts, bolts and gasket etcincluding making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. 4.00 Each ₹ 14,663.50 ₹ 58,654.00

120 17.10.1.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS : 13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required 510x1040 mm bowl depth 250 mm 2.00 Each ₹ 5,231.50 ₹ 10,463.00

121 17.7.1 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps 33.00 Each ₹ 2,764.40 ₹ 91,225.00

122 17.28.1.2 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 40 mm dia 33.00 Each ₹ 101.70 ₹ 3,356.00

123 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 33.00 Each ₹ 857.00 ₹ 28,281.00

124 17.33 Providing and fixing 600x120x5 mm glass shelf with edges round off,supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete 33.00 Each ₹ 713.30 ₹ 23,539.00

125 17.70.2 Providing and fixing PTMT Bottle Trap for Wash basin and sink Bottle trap 38 mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 263 gms 33.00 Each ₹ 325.10 ₹ 10,728.00

126 17.30 Providing and fixing in position 25 mm diameter mosquito proof coupling of approved municipal design. 14.00 Each ₹ 45.30 ₹ 634.00

127 17.35 Providing and fixing vent pipes :

a) 17.35.1.1 100 mm dia Sand cast iron S&S pipe as per IS : 1729 6.00 m ₹ 978.30 ₹ 5,870.00

128 17.71 Providing and fixing PTMT liquid soap container 109 mm wide,125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. 33.00 Each ₹ 146.30 ₹ 4,828.00

129 17.73.2 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms 12.00 Each ₹ 424.00 ₹ 5,088.00

130 17.69.2 Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. Waste coupling 38 mm dia of 83 mm length and 77mm breadth, weighing not less than 60 gms 33.00 Each ₹ 109.70 ₹ 3,620.00

131 17.4.1 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : One urinal basin with 5 litre white P.V.C. automatic flushing cistern 18.00 Each ₹ 3,723.20 ₹ 67,018.00

132 17.24 Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe. 6.00 Each ₹ 2,444.10 ₹ 14,665.00

133 18.21.2.1 Providing and fixing uplasticised PVC connection pipe with brass ions : 15 mm nominal bore 45.00 Each ₹ 85.20 ₹ 3,834.00

134 18.11 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall :

135 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work

18.12.8 80 mm dia. Nominal bore 1.00 m ₹ 818.20 ₹ 818.00

136 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore 26.00 Each ₹ 434.20 ₹ 11,289.00

137 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 75.00 Each ₹ 594.80 ₹ 44,610.00

138 18.17 Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :

a) 18.17.1 25 mm nominal bore 10.00 Each ₹ 532.30 ₹ 5,323.00

b) 18.17.2 32 mm nominal bore 10.00 Each ₹ 589.90 ₹ 5,899.00

c) 18.17.3 40 mm nominal bore 10.00 Each ₹ 707.30 ₹ 7,073.00

139 18.19 Providing and fixing gun metal non- return valve of approved quality (screwed end) :

a) 18.19.1.1 25 mm nominal bore Horizontal 25.00 Each ₹ 506.60 ₹ 12,665.00

b) 18.19.1.2 25 mm nominal bore Vertical 25.00 Each ₹ 573.50 ₹ 14,338.00

c) 18.19.2.1 32 mm nominal bore Horizontal 10.00 Each ₹ 677.60 ₹ 6,776.00

d) 18.19.2.2 32 mm nominal bore Vertical 10.00 Each ₹ 777.90 ₹ 7,779.00

e) 18.19.3.1 40 mm nominal bore Horizontal 10.00 Each ₹ 815.00 ₹ 8,150.00

f) 18.19.3.2 40 mm nominal bore Vertical 10.00 Each ₹ 1,049.20 ₹ 10,492.00

140 18.31 Providing and fixing C.I. sluice valves (with cap) complete with bolts,nuts, rubber insertions etc. (the tail pieces if required will be paid separately) :

18.31.1.1 100 mm diameter Class I 2.00 each ₹ 3,886.60 ₹ 7,773.00

141 18.32.1 Constructing masonry Chamber 30x30x50 cm inside, in brick work in cement mortar 1:4 (1 cement :4 coarse sand) for stop cock, with C. I. surface box 100x100 x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), i/c necessary excavation, foundation concrete 1:5:10 ( 1 cement : 5 fine sand : 10 graded stone aggregate 40mm nominal size ) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12mm thick, finished with a floating coat of neat cement complete as per standard design :With common burnt clay F.P.S.(non modular) bricks of class designation 100A 5.00 nos ₹ 1,177.90 ₹ 5,890.00

142 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms 4.00 Each ₹ 106.10 ₹ 424.00

143 18.40 Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :

144 18.46 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) :

a) 18.46.2 20 mm nominal bore 25.00 Each ₹ 185.60 ₹ 4,640.00

b) 18.46.3 25 mm nominal bore 25.00 Each ₹ 265.90 ₹ 6,648.00

c) 18.46.4 32 mm nominal bore 20.00 Each ₹ 306.00 ₹ 6,120.00

d) 18.46.5 40 mm nominal bore 20.00 Each ₹ 419.70 ₹ 8,394.00

145 18.53.1 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 a) 15 mm nominal bore 15 mm nominal bore 18.00 Each ₹ 500.40 ₹ 9,007.00

146 18.77 Cutting holes up to 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including finishing complete so as to make it leak proof 50.00 Each ₹ 217.10 ₹ 10,855.00

147 18.78 Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching surface after housing G.I. pipe etc. 300.00 M ₹ 85.40 ₹ 25,620.00

148 18.79 Making hole up to 20x20 cm and embedding pipes up to 150 mm diameter in masonry and filling with cement concrete 1:3:6 (1 cement : 3 coarse sand 6 graded stone aggregate 20 mm nominal size) including disposal of malba. 60.00 Each ₹ 115.70 ₹ 6,942.00

149 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking gement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 8000.00 LIT ₹ 9.70 ₹ 77,600.00

150 19.7.1.1 Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 30.00 Each ₹ 7,914.70 ₹ 237,441.00

151 19.35.1 Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C. pipes including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete 45.00 m ₹ 2,167.10 ₹ 97,520.00

152 19.18 Supplying and fixing C.I. cover without frame for manholes :

19.18.3 560 mm diameter C.I. over (heavy duty) the weight of the cover to be not less than 108 kg. 2.00 Each ₹ 6,918.30 ₹ 13,837.00

153 19.19 Providing and fixing in position precast R.C.C. manhole cover and frame of required shape and approved quality.

19.19.4.1 Circular shape 560 mm internal diameter 4.00 Each ₹ 1,393.20 ₹ 5,573.00

154 19.15 Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal\ size) as per standard design

19.15.2 With 20 mm diameter round bar 12.00 Each ₹ 296.30 ₹ 3,556.00

155 19.32 Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design.

19.32.1 With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 2.00 Each ₹ 33,603.00 ₹ 67,206.00

156 24.1.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia. 193.72 m ₹ 486.80 ₹ 94,303.00

157 24.2.1.1 Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, upto 90 metre depth below ground level. 300 mm dia. 30.00 m ₹ 567.90 ₹ 17,037.00

158 24.3.2 Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths,as per direction of Engineer -in-charge. 157.72 m ₹ 660.10 ₹ 104,111.00

159 24.4.2 Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge.150 mm nominal size dia 60.00 m ₹ 673.50 ₹ 40,410.00

160 24.5 Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-incharge. 0.20 cum ₹ 1,188.90 ₹ 238.00

161 24.6 Supplying, filling, spreading & leveling gravels of size range 5mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete 0.20 cum ₹ 1,195.60 ₹ 239.00

162 24.7 Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge. 0.20 cum ₹ 1,195.60 ₹ 239.00

163 24.8 Gravel packing in tubewell construction in accordance with IS: 4097,including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge. 11.24 cu-m ₹ 1,343.20 ₹ 15,098.00

164 24.13.2 Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 2.00 each ₹ 210.70 ₹ 421.00

165 24.14.2 Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 2.00 each ₹ 1,531.40 ₹ 3,063.00

166 24.15.2 Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 2.00 each ₹ 281.80 ₹ 564.00

167 18.9.4 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge. 50.00 m ₹ 359.10 ₹ 17,955.00

168 24.12 Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully develo ped, measuring yield of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tubewell, all complete,including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. 16.00 hour ₹ 916.80 ₹ 14,669.00

169 M.R Supplying and fittings 1 HP Submersible water pump with starter cables etc. all necessary fitting etc. all complete jobs. 2.00 set ₹ 15,650.00 ₹ 31,300.00

170 M.R S/F/F Submersible Electric Wire all complete job as per specification and direction of E/l 1 No. 150.00 Bags ₹ 72.61 ₹ 10,892.00

171 M.R Safety wire 1.5mm dia of Approved ISI Mark. 150.00 M ₹ 31.00 ₹ 4,650.00

172 M.R Adapter 32mm dia Standerd (CI Top & Bottom) of Approved ISI Mark. 2.00 M ₹ 389.85 ₹ 780.00

173 23.2 Supplying and stacking of good earth at site including royalty but excluding carriage (earth measured in stacks will be reduced by 20 % for payment) 2750.00 cum ₹ 143.50 ₹ 394,625.00

23.4 Supplying and stacking at site dump manure from approved source, excluding carriage (manure measured in stacks will be reduced by 8% for payment)

174 23.4.3 Screened through sieve of I.S. designation 4.75 mm 594.00 cum ₹ 315.80 ₹ 187,585.00

175 23.9 Mixing earth and sludge or manure in proportion specified or directed. 3344.00 cum ₹ 20.90 ₹ 69,890.00

176 23.8 Spreading of sludge, dump manutre or/and good earth in required thickness (Cost of sludge, dump manure or/and good earth to be paid separately) 3344.00 cum ₹ 30.10 ₹ 100,654.00

23.10 Grassing with 'Doob' grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn free form weeds and fit for moving including supplying good earth if needed.

177 23.10.3 In rows 5 cm apart in either direction. 1368.00 100 sqm ₹ 1,027.40 ₹ 14,055.00

178 23.14 Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20 % 1 part of stacked volume of manure after reduction by 8 % ) flooding with water, dressing including removal of rubbish and surplus earth, if any with all leads and lifts (cost of manure sludge or extra good earth if needed to be paid for separately)

23.14.2 Holes 60 cm ciia. And 60 cm deep. 80.00 each ₹ 69.30 ₹ 5,544.00

179 23.13 Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8 :1 (8 parts of stacked volume of earth after reduction by 8% ) flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and levelling as directed, within a lead of 50 m lift upto 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) 29.00 cum ₹ 126.90 ₹ 3,680.00

180 11.0/ Plantation of trees & Shrubs/ creeps.

182 6 Providing, laying, testing & commissioning of "C" Class heavy duty MS pipe conforming to IS 1239/3589 i/c fiiitngs like elbows, tees, flanges, tapers, nut bolts, gaskets, etc. in ground including welding, excavation & providing concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. Pipe Make : TATA / JINDAL HISSAR/ NEZONE.

183 7 Providing, laying, testing & commissioning of "C" Class heavy duty MS pipe conforming to IS 1239/3589 i/c fiiitngs like elbows, tees, flanges, tapers, nut bolts, gaskets, etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required. Pipe Make : TATA/JINDAL HISSAR / NEZONE.

184 14 Providing, fixing, testing & commissioning of non-return valve of following sizes conforming to IS : 5312 complete with rubber gaskets, GI bolts, nuts, washers etc, as required. Make : Kartar / Audco / Advance / Sant.

185 11 Providing , fixing, testing & commissioning of butterfly valves of PN 1.6 rating with bronze / gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required, Make : Kartar / Audco / Advance / Sant.

186 24 Providing, fixing, testing & commissioning of installation control valve of cast iron body, brass / bronze working parts comprising of water motor alarm, bronze seat clapper, clapper arm and hydraulically driven mechanical gong bell to sound continuous alarm when the wet riser / sprinkler system activates, pressure gauges, emergency releases, strainer, pressure switch, cock valve complete with drain valve and bypass, test control box, ball valves, MS pipe of required size, flanges, orifice plate, gasket etc. of following size as required:

II. INTERNAL HYDRANT SYSTEM

187 9.2 Providing and fixing ISI marked SS-304 fire hydrant valve 80 mm inlet with single outlet and fitted with 63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain, nuts, bolts and 3 mm thick compressed asbestos gasket at locations as per drawings ( inlet flange as per IS: 5290-1969 Class C ). MAKE : OMEX / NEWTECH / SAFEGUARD/ EQV. 6.00 Each. ₹ 5,722.00 ₹ 34,332.00

188 17.1 Providing and fixing first aid fire hose reel drum wall mounting & swinging type fitted with 20 mm dia 30 m long high pressure hose as per IS : 5132 with 5 mm outlet SS nozzle with shut off valve ( IS: 884-1969). Make :OMEX / NEWTECH / SAFEGUARD / EQV. 6.00 Each. ₹ 7,920.00 ₹ 47,520.00

189 16.2 Providing and fixing 63 mm dia (15 m long) EPDM lined fabric hose including SS-304 male and female instantaneous type coupling approved by fire authority, machine wound with GI wire complete in all respects. Hose shall conform to IS : 636 Type II and coupling to IS: 903 – 1975 with ISI certification. MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 6.00 Each. ₹ 4,445.00 ₹ 26,670.00

190 18.2 Providing and fixing standard short size SS branch pipe with nozzle 16 mm dia. Outlet with standard instantaneous type 63 mm dia. Coupling as per IS : 903 ( ISI marked. ). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 6.00 Each. ₹ 1,631.00 ₹ 9,786.00

191 19.3 Providing and fixing 150 mm dia Three –Way Fire brigade connection consisting of 63 mm dia instantaneously male coupling and and a check valve protected by cap scored with a chain glass bore etc. complete with 150 mm sluice valve and 150 mm non return valve ( To be connected to riser ). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 2.00 Each. ₹ 9,071.00 ₹ 18,142.00

192 19.2 Providing and fixing gun-metal 4-way fire brigade inlet connection of 4 nos. 63mm dia instantaneous type male coupling with 150 mm non-return valve and 150mm dia sluice valve with 150 mm flanged outlet complete with bolts, nuts and rubber insertions as per I.S:904. (to be connected to static tank). MAKE : OMEX / NEWTECH / SAFEGUARD/EQV. 2.00 Each. ₹ 13,636.00 ₹ 27,272.00

III. EXTERNAL HYDRANT SYSTEM

193 10.2 Providing and fixing ISI marked SS - 304 fire yard hydrant valve 80 mm inlet with single outlet and fitted with 63 mm dia instantaneous female coupling on the outlet complete including companion flanges, pvc black cap and chain, nuts, bolts and 3 mm thick compressed asbestos gasket at locations as per drawings ( inlet flange as per IS: 5290-1969 Class C ). MAKE : OMEX / NEW TECH/EQV. 3.00 Each. ₹ 5,722.00 ₹ 17,166.00

IV FIRE PUMPS & ACCESSORIES

194 1 Providing and fixing horizontal split casing single/multi stage, single/multi outlet pumping set with bronze impeller with C.I. body and connected by a flexible coupling to a totally enclosed fan cooled induction motor mounted on a common structural base plates with all pump accessories complete as per specifications including pressure gauges with gunmetal isolation valves and anti vibration pads, motor to be suitable for 415 volts, 3 phase, 50 cycles A.C. supply (Specifications as per fire fighting requirements and on the pattern of TAC or local authority approval) as per instruction and following specifications: MAKE : KIRLOSKAR/PEW/MATHER & PLATE/EQV.

1.5 Main fire Pump & Sprinkler Pump

Type : Split casing

Speed (rpm) : 2965

Capacity : 2280 lpm

3.2 Jockey Pump

Type : Split casing

Speed (rpm) : 2965

Capacity : 180 lpm

4.1 Terrace Pump

Type : Split casing

Speed (rpm) : 2965

Capacity : 900 lpm

195 2.5 Diesel Engine Driven Fire Pump

Supplying and fixing factory fitted single stage horizontal split casing pumping set of the following specifications including vibration elimination pads, suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12/24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 mtr. outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminum sheet cladding, residential silencer, instruments & protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red color etc. as required. MS fabricated common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti-vibration pads.

a. Capacity : 2280 LPM

c. HP : As per approved performance curve

d. RPM : 1500 (pump and engine)

e. Material of Construction:

Shaft & Sleeve : S.S. 410

Impeller : Bronze

Bearing : Grease, lubricated

Seal - Mechanical seal.

g) Pump foundation as per manufacturer.

Note: Pump and motor should meet the additional requirement as specified on the specifications and rates will be inclusive of everything as mentioned in the specifications.

196 20 Air Vessel for Fire Pump:

Providing and fixing of air vessel of the following specifications fabricated with MS sheets.

a. Diameter : 250 mm

b. Shell Thickness: 8 mm

c. Dish Ends : 10 mm

d. Height : 1200 mm

e. Finishing: Two coats of red enamal

paint over primer out side and two

coats of epoxy coating inside.

f. Material of construction: M.S

g. Test Pressure: 22 Kg/Sq.Cm.

i. Height of supporting legs: 400 mm

Note: Contractor should submit general arrangement drawings before fabrication of vessel and ultrosonic test report to be submitted on supply of vessel and test to be conducted at the presence of Plumbing-In-Charge.

197 22 Providing and fixing dual type pressure switch suitable for 1-20 Kg/cm2 including electrical connections setting of Cut-In and cut-Off pressure complete in all respects. 2.00 Nos ₹ 1,442.00 ₹ 2,884.00

Panel for fire pumps

198 5.4 Design, fabrication, assembling, wiring, supply, installation, testing and commissioning of motor control centre shall be fabricated out of 14 gauge CRCA sheet steel in form in 3b formation with reinforcement of suitable size angle iron, channel ‘T’ sections irons and /or flats wherever necessary. Cable gland plates shall be provided on top as well as at the bottom of the panels. Panels shall be treated with all anticorrosive process before painting as per specifications with 2 coats of red oxide primer and final approved postal red color shade of powder coated paint. 2 Nos. earthing terminals shall be provided for 3 phase, 4 wire, 50 Hz supply system. Lifting hooks shall also be provided in case of large panels. Approval shall be taken for each panel before fabrication. Cadmium Plated hardware shall be used in fabrication of panels.

400 A, 50 kA 4 pole MCCB, Ics =100% Icu Rating Digital Voltmeter 0-500 V with selector switch Ammeter ( 0-800 A ) with selector switch & CTs etc. LED type RYB phase indicating lamps, ON, OFF, trip indicating lamps Set of Copper Bus Bar 1000 Amps.

( Note : All outgoing feeders for pumps should have digital Ammeter with selector switches and LED type ON, OFF, Trip indicating lamps.

Main fire Pump 125 Amp, 50 KA TPN MCCB, Ics = 100% Icu, with fully automatic Star / Delta starter suitable for 100 hp pump with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local / remote, auto/manual/OFF operation - 2 sets.

Jockey Pump : 63 Amp, 50 kA TPN MCCB, Ics = 100% Icu, with suitable HP fully automatic Star/Delta starter with overload protection, current sensing type single phase preventor complete with all accessories and internal wiring required for automatic operation, selector switch for local/remote, auto/manual/OFF operation- 2 sets.

DIESEL ENGINE CONTROL : Control for diesel engine comprising Automatic / Manual selector switch & 3 attempts starting device, timer and relays as required, push buttons, start/stop in manual mode. Indicating lamp for high / low Lub. oil pressure, High water Temp and Engine for indication. Battery charger for 12 V / 24 V DC with boost and trickle selector switch, 0-30 V DC voltmeter, and 0-20 A DC Ammeter. All standard relays and accessories for automatic operation of diesel engine System Controller Designing, Supply, Installation, Testing and Commissioning of system controller to control operation of main electric fire pump, diesel pump, Pressurization pump, Terrace pump in sequence as per specification consisting of relays, timers, Sensors, annunciation window for fault indication, complete as per specification. 1.00 Each ₹ 375,827.00 ₹ 375,827.00

7.6 Providing and fixing diesel engine exhaust pipe with M.S. pipe 80 mm dia conforming to I.S. 1239 (Heavy Class) complete with all supports & fittings like, unions, couplings, bends, elbows, tees, offsets,reducers, flanges as per table 'E' etc. to complete the work as per the requirement at site including insulating the pipe with 12 mm thick supercera ceramic fibre rope over two coats of primer after surface preparartion and two coats of bitumastic paint, cutting and making good the walls good complete. ) 45.00 Meter ₹ 951.00 ₹ 42,795.00

199 Code No. 21/ SOR. Providing and fixing 15 mm gunmetal sprinkler head with quartz bulb and set to operate at specified temperature pendent/ upright/ side wall /quick response as per instruction fixed with loctite. Temperature of operation 68 deg.C K-80

Pendant type 125.00 Nos. ₹ 408.00 ₹ 51,000.00

200 Code No. 29/ SOR. Providing and fixing UL/Fm listed powder coated finish Escutcheon plate complete including fixing in position on pipe and ceiling complete in all respects. (Size=15NB) 125.00 Nos.4 ₹ 167.00 ₹ 20,875.00

201 VIII WATER TANKS. 10000.00 ltr. ₹ 9.70 ₹ 97,000.00

B Smoke Detector & Fire Alarm System :

202 D.S.R. (E&M)-17.2.4 Supply, installation, testing & commissioning of Addressable Smoke Detector with base, complete in aI1 respect. 49.00 Each ₹ 2,858.00 ₹ 140,042.00

203 D.S.R. (E&M)-17.2.7 Supply, installation, testing & commissioning of fault isolator complete with base as required 3.00 Each ₹ 3,270.00 ₹ 9,810.00

204 D.S.R. (E&M)-17.2.14 Supply, installation, testing & commissioning of Addressable Manual Call Point (MCP), complete in all respect. ' 4.00 Each ₹ 3,871.00 ₹ 15,484.00

205 D.S.R. (E&M)-17.2.15 Supply, installation, testing & commissioning of Fire Alarm / Horn cutn iitrobe, complete in all respect. ', 4.00 Each ₹ 3,506.00 ₹ 14,024.00

206 D.S.R. (E&M)-17.2.1.2 Supply, installation, testing & commissioning of Smoke Detector & Fire AU Two Loop Control Panel with LCD display, battery backup facility, complete in all respect. 1.00 Each ₹ 239,225.00 ₹ 239,225.00

207 D.S.R. (E&M)-17.5.2 Supply, installation, testing & commissioning of 2 core 1.5 sq.mm. Armoured Cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire amiouring & FRLS outer sheath, complete as required 350.00 Mtr. ₹ 173.00 ₹ 60,550.00

C Fire Eztingulsher & Sigaages :

V FIRE EXTINGUISHERS

208 NS Providing and fixing CO2 extinguisher consisting of seamless MS cylindrical body squeeze lever discharge valve, internal discharge tube, 30 cms long high pressure discharge hose, discharge nozzle ISI marked as per IS: 15683 including fixing with dash fasteners etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV.

209 NS Providing and fixing ABC Powder type fire extinguisher consisting of welded M.S. cylindrical body, squeeze lever discharge valve, 30 cms long high pressure discharge hose ISI marked as per IS:15683 including fixing to wall with brackets etc. complete. MAKE : OMEX / NEWTECH/ SAFEGUARD/ EQV.

PANNEL AND OTHER NS ITEM

210 OT-D Design/supply/installation of Exterion signage to Be fixed with the Help of Aluminium pipe Framework and Cladded with 3mm ACP(As per site Requirement IfNeeded)and Letters to Be made of stainless steel of 304 Grade Raised by 25mm From the Base The Scope Includes Completion of Job in All Respects Including Hardware in All HINDI/ENGLISH & URDU Language Letter Size 15" 1.00 SET ₹ 247,800.00 ₹ 247,800.00

211 3SS Design/supply/installation Building/ Directory Signage With Acrylic Base of Thickness 5mm 1.00 Each ₹ 11,210.00 ₹ 11,210.00

212 3S-WC Providing and Fixing of Aluminium Signages Modular FLAT Frame Technology Of Various Widths and Lengths To From Suggesterd Usages Made Of Aluminium Extruded Sections Duly Anodised All Signages Shall Be providing With 0.6-0 8MM Prolycarbonate Protelcting Film Over the Pnnta of Appropriate Size Print Shall on 0.6mm Coated YUPO Make Biogradable Flat Bed Printed Overall Size 150mm X 300mm Sheet Printer on HP4500 UV Flat Bed Printed

i Overall Size :- 150mm X300MM 10.00 Each ₹ 2,106.30 ₹ 21,063.00

ii Overall Size 93mm x 300mm 30.00 Each ₹ 690.30 ₹ 20,709.00

213 N/S Providing and Fixing of Photoluminescent 1mm Rigid PVC Based Sheet Containing Lumingen 3, As Base Chemical With Hight Internsite Luminous Glow Capacity Each Sign Which IS Required to BE MOUNTED ON 3MM ROUTER CUT Aluminium composite Panel With 25mm Boarder All Around Over the Size Of Photoluminescent sign ACP Shall Have Rounded Corners And Fixed On Wall Surface AS Per Drawing 20.00 EACH ₹ 1,003.00 ₹ 20,060.00

214 N/S Supply and installation of AnutoneEcotone/Knauf or Equivailent Slim, high density polyfibre panels, core-pigmented, high-density, SynthPF rigid panels of size 1220x2440x5mm, volume density 200/180kg/m3, weight 1.8/2.16kg/m2 adhered on backer board, square edge magnesite bonded 2mm wide pinewood fibre core board of size 600x1200x10mm, volume density 400kgs/m3, weight 4kg/m2,installed by using Strut ceiling framework. As per Drawing. 818.193 sqm ₹ 4,915.00 ₹ 4,021,419.00

215 N/S supply & installation AnutoneEcotone/Knauf or Equivailent Slats Acoustical Wall Panelling made of pinewood E1 grade high density fiberboard, Melamine laminated finish, groove perforated slats L16-2 - (2mm Slats @16mm pitch) / L32-2 - (2mm grooves @ 32mm centers) / L24-2 - (2mm grooves @ 64mm centers), backlined with black acoustical fleece, tongue-groove edge for a seamless look, of size 144/128x2440mm with min 16mm thick having base density 800Kg/m3, weight 12Kgs/m2 installed by using GI strut system. The GI strut system includes two layers of GI Cross channel (CC50) having thi ckness 0.45mm, length 3600mm, knurled web 40mm, depth 50mm and equal flanges 15mm is fastened vertically/horizontally at every 600mm centers. Aluminium core cross channel (CC18) having thickness 0.5mm, length 2400mm, web 15mm & 27mm, depth 18mm and flanges of 7mm with suitable edge & centre brackets is then fixed perpendicular to the CC50 with the help of fasteners at every 400mm centers. Slats of size 144/128x2440mmx16mm in then fixed perpendicular to CC18 with suitable edge & centre brackets. Contractor to provide expansion joints of 3mm at every 5mtrs bothways. 213.415 m ₹ 8,382.00 ₹ 1,788,845.00

216 N/S Supply and installation of AnutoneEcotone/Knauf or Equivailent Stretch Hush system consisting of Hush fabric with polyester core, acoustically-transparent face covering of choice colour, size 1.4m, stretched by using combination of Strand2 primer 600x1200x15mm, Strut FS15 Tracks, SynthPF 10x25 infill with strut framework. As per Drawing 208.54 sqm ₹ 7,655.00 ₹ 1,596,351.00

218 MR KLIP LOCK-700 P/F testing and commissionigof roofing make tata /JSW/ITINALAW ETC. bluscope 1024.71 sqm ₹ 2,364.23 ₹ 2,422,650.00

219 MR Providing and fixing flashing ridge make tata/JSW/ITINALAW ETC. bwescope 75.00 mtr ₹ 631.00 ₹ 47,325.00

220 MR 3D ACRYLIC LIGHT LETTERS (RED) 384.00 NOS ₹ 501.50 ₹ 192,576.00

221 OT-D Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side one drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. 10.00 Each ₹ 32,800.00 ₹ 328,000.00

222 3SS 3 Seater Sofa The side frame assembly made of 38mm Dia 2mm thick is fitted to the two ends of the connecting beam assembly to form the leg-cum-armrest assembly. It is made of a MS. E.R.W. tube duly powder coated. The ends are fitted with ABS moulded end caps. TIE MEMBER: It is the connecting beam assy. which holds the two side frames to each other. 2 nos. tie members are used to connect the side frames. The tie-member is made of MS. E.R.W. tube 40mmx40mm 2mm thick duly powder coated. The seat/back assemblies are mounted on the tie- member. L bracket of 6mm thick steel connects the back to the tie member assembly. Seat foam is of 45 +/-5 Kg/m3 and back foam is of 32 +/-5 Kg/m3 with hardness of 25+/-2 on Hampden m/c. at 25% compression of the foam. Seat size 52cm wideX50cm deep and back size 52 cm wide and 60cm high. Back of the sofa flexes for additional comfort 1 seater –601mmWX700mmDX 810mmH, 3 seater –1640W x 700D x 785 H cm 10.00 Each ₹ 68,800.00 ₹ 688,000.00

223 3S-WC 3 seater Steel chair Cross Beammade of MS ERW rectangular black powder coated Tube of 80 x 40 x 2 mm Leg & arm rest chrome plated made of cold rolled steel. Arm rest & leg assembled to the cross beam with M10 x 100 mm bolts. Seat & back 1.6mm thick powder coated perforated shell of cold rolled MS Sheet. Side Bar of chrome plated solid steel 30 x 12 mm (DIN 174) with flunting & plastic insert .The shell is assembled on the cross beam with help of M8 Bolts The overall dimension is 1608mm (L) x 695mm (H) x 555mm (D), Seat Height : 405mm 40.00 Each ₹ 29,800.00 ₹ 1,192,000.00

224 CNT Centre Table of size 1200W x 600D x 378H built with the extremely durable rubberwood, the table can hold weight up to 25kgs. With a very suitable Cappuccino color, the table will complement any style of décor. The tapered legs provide stable support. It’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. The well-thought-out dimensions of the table make it easier to position it anywhere in the house 8.00 Each ₹ 24,800.00 ₹ 198,400.00

225 EC-CU Executive chair with cushioned seat is made of injection molded plastic outer & inner plastic inner is upholstered cover etc. 50.00 Each ₹ 16,800.00 ₹ 840,000.00

226 CC - WA Computer Chair with seat and back are made uo injection moulded high impact strenght polypropylene polymer compound with indoor graade UV Resistance.The tubular weled frame is made from Dia2.22 +/- 0.03cmx 0.12+/- 0.0128 cm and 3.5+/- 0.03 cm x 0.12+/- 0.0128 am stainless Steel 202 grade tube.The tube are buff polished to give shiny finish. cm. The Shoes are made of high impact strenght polypropylene polymer. compond with indoor grad UV Resistance and pressed fitted with tubularfram. SIZE : (W)52.5cm*(D)55.8cm*(H)84.5cm* (seat H) 45.0 cmSeat Size 52.5cm(W)*53.2 cm(D) Back Size 51.6 cm(W)*40.5 cm (H). 4.00 Each ₹ 7,780.00 ₹ 31,120.00

227 OC-C Office Chair Mid back pneumatic height adjustment cushioned revolving chair made up of 1.2cm thick hot pressed ply wood seat & back upholstered with fabric with moulded polyurethane foam together with moulded ABS seat & back integral skin polyurethane with reinforced with M.S. Insert. The tilt mechanism adjustment upright locking, 360 degree revolving type fitted with 05 nos. twin wheel castor dia 5 cm. 50.00 Each ₹ 14,800.00 ₹ 740,000.00

228 CNFT Conference Table of 30 Seater -Capacity shall be an eco-modular conference table enables various configurations to suit different conference rooms. It is made of particle board and has wire management facilities for uncluttered wiring. It has profiled legs with twin colored modesty for better looks, Double 1350.0Wx 600.0Dx 750.0H, Work surface Top thickness is 25mm PLB with PVC beading allover, Legs Modesty Wire Manager Made from 18mm thick PLT having curved profile.Made from PLT (Prelaminated Twin) boards 18mm thick in two shades. A Wire Manager running along the width of desk fitted on the modesty Panel from Inside. 1.00 Each ₹ 389,500.00 ₹ 389,500.00

229 CORT Corner Table of size 530W x 450D x 450H built with the extremely durable rubberwood, With a very suitable Cappuccino color, the table will complement any style of décor. The tapered legs provide stable support. It’s free of flaws design can accommodate your books, magazines, laptop and coffee mugs, all at once. The well-thought-out dimensions of the table make it easier to position it anywhere in the house. 5.00 Each ₹ 18,800.00 ₹ 94,000.00

230 FCT File cabinet with 4 Drawer Width: 470mm, Height: 1320mm, Depth: 620mm , Rigid KnockDown Construction, Material:- Top, Side & Drawer Frontmade from0.7mm thk **CRCA, Drawer- Inside Cover, Side Back Side made from0.6mmthk **CRCA, Back, Bottom, Drawer Bottommade from 0.5mmthk **CRCA, **CRCAsteel confirming to IS 513, Grade-D, Label Holder- Snap on type plastic label holder on Drawer Fronts, Locking & anti-tipping arrangement- Centralized lockingwith CamLock& having antitipping arrangement to ensure that when one ,drawer is opened for use, it does not allow other drawers to be opened, finish- Epoxy Polyester Powder coated to the thickness of 50 microns (+/-10). 2.00 Each ₹ 39,800.00 ₹ 79,600.00

231 FP-CBNT Fire proof Cabinet shall be designed to protect the contents (paper media documents) against the fire hazard.Shell: The external shell of the cabinet shall be of steel of minimum 2 mm thick and internal shell of steel of 1.6 mm thick, both conforming to IS 513. Further fortified by suitable in-situ insulating fire-resistant barriers to meet the required protection. The overall protection to the contents shall be minimum 70 mm on all six sides. Door: The external door of the cabinet shall be of steel of minimum 2 mm thick conforming IS 513 and further fortified with hard plate over the lock for burglary protection and in-situ insulating fire-resistant barrier material to meet required fire protection. Bolt work: The door shall be secured by four way locking mechanism / Bolt work with minimum 8 moving shooting bolts of 20 mm diameter. Door & Body Fitment: The door fits in the cabinet having tongue and groove construction that stops hot gases and high temperature to pass through and withstand temperature up to 1010 deg.C. Locking: The FRRC shall be equipped with a dual control high precision key lock of minimum six levers. The Lock body shall be of Zinc Alloy and the Levers in the lock shall be of Brass conforming to IS 410. There shall not be any dummy lever in the lock. The storage capacity shall be minimum 650 Liters with minimum usable internal sizes in mm as 1620 (h) x 670 (w) x 599 (d).The cabinet shall be provided with minimum four nos. adjustable shelves. 1.00 Each ₹ 296,800.00 ₹ 296,800.00

232 S - AL Steel Almirah of size 1981 x 916 x 486 MM multi bend construction and inter locking design and full length over apping doors and sides. Three-way bolting mechanism. Spot welding & CO2 welding. Anticorrosion treated components, oven baked powder coating process. Material thickness 0.9mm.Top, Bottom,LH & RH sides and back material thickness= 0.9mm,Removable RH & LH main door with stiffeners material thickness= 0.9mm, 4 adjustable shelves of thickness= 0.8mm 15.00 Each ₹ 39,900.00 ₹ 598,500.00

233 SR - A Steel Rack of size 6'x36"x18" with Six Shelves Prime quality CRC sheet conforming to IS 513D/10748/5986. The pitches of the slots at 19.05 mm, Panel/Shelves: 6 Bnd bending process of 905L x 448D of load capacity 80 Kgs. UDL Max Per shelf. Shelf Material- 0.8 mm Thick MS Sheet Conforming to Commercial Quality CR-1, Grade 340 of IS 513, Angle Posts Material and size-Rolled steel angle posts of 40 X 40 X 1.8 mm, M S Sheet Thickness of Shelves and Back (Minimum) in mm-0.8, Paint-Powder coated with Lead Free Paint. 10.00 Each ₹ 16,800.00 ₹ 168,000.00

234 CT Computer Table of Size-600W x 450D x 750H mm Compact and easy to use . Top made-up of 1.5 cm Medium Density Fiber. All the other panels are made of Particle board. Vacuum lamination of pvc has been done on the table to surface. 0.4mm lapping is used for all the other panels 4.00 Each ₹ 14,500.00 ₹ 58,000.00

235 OT-A Office Table made of MS ERW round tube dia 25.4 x 1.2mm thick with 18 mm thick Pre Laminated top size 1365 X 680 X 735 (Approx.) with both side drawer unit one side three drawers & another side two drawers made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with both side drawer lock 10.00 Each ₹ 18,800.00 ₹ 188,000.00

236 PT Principal Table Main desk of size 1800 x 900 x 740, ERU of size 1550 x 450 x 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING WITH 01 NO. 3 DRAWERS FREE STANDING PEDESTAL. 1.00 Each ₹ 89,800.00 ₹ 89,800.00

237 DRS-T Dressing Table of size 460W x 486D x 1710H mm , Mirror W x H: 362 mm x 1156 mm dressing table comes with a long mirror, two storage drawers, and a stool. Available in wenge color, the dresser is crafted from good quality MDF wood, making it sturdy and lasting. The shelves of this stylish dressing table can be used to keep items like perfume bottles, hair products, and medicines, for that clutter-free look. The stool, also wenge color with an orange colored cushion, offers comfortable seating, while the full length mirror is perfect to dress up, and check your overall ensemble. 10.00 Each ₹ 26,800.00 ₹ 268,000.00

238 AUDI - C Auditorium Chair SEAT/BACK ASSEMBLY: The seat and back are made up of 1.2±0.1 cm. thick hot-pressed plywood measured as per QA method described in OCP-QLTA-P14-18 and upholstered with fabric and moulded Polyurethane foam. The back is, flexing type.Back Size-47.0 cm. (W) x 51.0 cm. (H), Seat Size-47.0 cm. (W) x 47.0 cm. (D). 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam is moulded with density = 45±2 kg/m3 and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression.3. ARMRESTS :The one-piece armrests are made of black integral skin polyurethane foam with 50-70 Shore hardness and reinforced with M.S. insert. The armrests are scratch and weather resistant.5. UNDERSTRUCTURE ASSEMBLY: It is made of Dia. 2.54±0.03cm. x 0.2±0.016cm. thk. M.S.E.R.W. tube with connecting strips made of 0.5 ± 0.05 cm. thk. HR Steel welded to it for holding the seat. The assembly is powder coated ( DFT 40-60 microns ).The auditorium chair is designed to get mounted/grouted on floors with flooring specification as mentioned in flooring pre-requisite Godrej doc-no: STG 129368.Overall Width-57.0, Depth-57.0, Height-86.0, Seat Height-44.0 cm. 620.00 Each ₹ 13,762.00 ₹ 8,532,440.00

239 NB Notice Board with size 4' X 3' Surface Material-woolen felt / fabric in various colours,Core material-9 mm thick soft board,Backing Material-0.62 mm to 0.82mm thick laminate sheet with extra melamine surface mix colour OR 0.16 to 0.25 mm thick ISI mark GP sheet,Aluminium frame-Anodized 5 microns extruded aluminium section designation 63400 as per IS:1285- 2002 - 16 mm thickness 2.00 Each ₹ 11,800.00 ₹ 23,600.00

240 N/S 1 NOS FOUNTAIN WORK 1.00 Each ₹ 783,000.00 ₹ 783,000.00

APPLY CORRECTION FACTOR 0.982 ON SOR & DSR -------- (B) ₹ 130,194,749

SUB TOTAL (A+B+C) ₹ 164,088,873

241 1.3.3 Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc.as required

242 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 62 Each 358.00 22,196.00

243 1.4 Wiring for twin control light point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box etc as required. 12 Each 1,248.00 14,976.00

244 1.5 Wiring for light/ power plug with 2 X 4 sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit along with 1 Nos 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required. 1640 Metre 309.00 506,760.00

245 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 0.00

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 1850 Metre 201.00 371,850.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 300 Metre 246.00 73,800.00

1.7.3 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 700 Metre 309.00 216,300.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 360 Metre 660.00 237,600.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 150 Metre 925.00 138,750.00

246 1.22 Supplying and fixing metal/ PVC box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 0.00

247 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 82 531.00 43,542.00

248 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 88 Each 414.00 36,432.00

249 1.24 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 0.00

1.24.6 Telephone socket outlet 10 Each 131.00 1,310.00

1.24.7 TV antenna socket outlet 10 Each 131.00 1,310.00

250 1.16 Supplying and drawing following pair 0.5 sq. mm FR PVC insulated annealed copper conductor, unarmoured telephone cable in the existing surface/ recessed PVC conduit as required. 0.00

251 1.21 Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/ recess including cutting the wall and making good the same in case of recessed conduit as required. 0.00

252 1.38 Supplying and fixing electronic musical call suitable for single phase, 230 volts complete bell as required. 1 Each 351.00 351.00

253 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 75 Each 64.00 4,800.00

254 1.26 Supplying and fixing modular blanking plate on the existing modular plate & switch box but excluding modular plate as required. 60 Each 34.00 2,040.00

255 1.17 Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed PVC conduit as required. 250 Metre 42.00 10,500.00

256 1.56 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 nos. 5 pin 5/6 amps modular socket outlet and 2 nos. 5/6 amps modular switch, connection etc. as required. 11 Each 778.00 8,558.00

257 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 0.00

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 12 Each 4,184.00 50,208.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type 5 Each 5,132.00 25,660.00

258 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 0.00

2.12.1 6 A to 32 A, Single pole 234 Each 237.00 55,458.00

259 1.53 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 25 amps modular socket outlet and 25 amp modular SP MCB 'C' curve, including connections, painting etc. as required. 37 Each 683.00 25,271.00

260 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 60 Sqft 1,809.00 108,540.00

261 AR Supply of Copper Strip 40 Kg 871.00 34,840.00

262 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

263 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required. 0.00

264 3.21 Providing chemical/mineral maintenance free earthing system comprising of copper coated earth electrode 3 metre length and 17.2 mm outer dia along with 25 kg earth conductivity enhancing back fill mineral compound for earth electrode to fill up the excavated earth and earth inspection pit etc. as required. 4 Set 16,675.00 66,700.00

265 3.14 Providing and fixing 25 mm X 5 mm copper strip on surface or in recess for connections etc. as required. 25 Metre 1,180.00 29,500.00

266 3.2 Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc with charcoal/coke and salt as required. 2 Each 6,323.00 12,646.00

267 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 125 Metre 144.00 18,000.00

268 4.1 Providing and fixing lightning conductor finial, made of 25 mm dia 300 mm long, copper tube, having single prong on top, with 85 mm dia 3 mm thick copper base plate including holes etc. complete as required. 4 Each 1,056.00 4,224.00

269 4.5 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For horizontal run) 50 Metre 516.00 25,800.00

270 4.6 Providing and fixing copper tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. ( For vertical run) 30 Metre 559.00 16,770.00

271 4.11 Providing and fixing testing joint, made of 20 mm X 3 mm thick copper strip, 125 mm long, with 4 nos. of tinned brass bolts, nuts, chuk nuts and spring washers etc. complete as required. 10 Each 274.00 2,740.00

272 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required. 0.00

273 7.1 Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. 0.00

7.1.4 Above 185 sq. mm and upto 400 sq. mm 365 Metre 368.00 134,320.00

7.4.2 Above 35 sq. mm and upto 95 sq. mm (Clamped with 25 x 3 mm MS flat clamp) 46 Metre 109 5,014.00

274 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required. 0.00

275 8.16 Supply and installation of regular/standard model A.C. ceiling fan of 1400 mm sweep with service value (CM/MM) minimum 4.10, Air delivery minimum 245 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 62 Each 2,838.00 175,956.00

276 8.19 Supply and installation of 400 mm, 230 V A.C. wall/cabin fan including fixing the bracket, making connection, testing, commissioning etc as required. 32 each 3,670.00 117,440.00

277 5.7 Supplying and fixing recess mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

278 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required. 0.00

279 5.8 Supplying and fixing surface mounted following types LED downlighter with minimum efficacy 100 lm/w in pressure die-cast aluminium housing and integrated electronic driver etc directly on ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 0.00

280 5.15 Supplying and fixing following types LED Flood light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

281 5.9 Supplying and fixing recess mounted 36 watt LED flat panel (2' X 2') with minimum efficacy 100 lm/w which privides soft light and glare free symmetrical illumination suitable for armstrong/grid ceiling and integrated electronic driver etc directly on false ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor cable etc as required. 42 each 2,663.00 111,846.00

282 5.2 Supplying and fixing 2'X9 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 56 each 492.00 27,552.00

283 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 2 each 6,536.00 13,072.00

284 5.11 Supplying and fixing wall mounted light bracket/ fixture made with polycarbonate suitable for single 9/10 watt LED lamp directly on wall including connections etc as required. ( But without lamp ) 75 each 1,340.00 100,500.00

285 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required. 0.00

6.1.4 9/10 watt LED lamp 75 each 161.00 12,075.00

6.1.7 20 watt LED lamp 4 each 267.00 1,068.00

286 5.13 Supplying and fixing post top / gate light (width 250/300 mm) made up of high grade unbreakable polycarbonate material suitable for upto 20 watt LED lamp including connections and earthing the body etc as required. ( But without lamp) 4 each 1,399.00 5,596.00

287 8.22 Supply and erection of 6 metre height Hot-dip galvanized octagonal street light pole with following arm with top dia 70 mm and bottom dia A/F 130 mm, made of 3 mm thick sheet along with base plate of size 220 X 220 X 12 mm , small door opening for junction box mounting including 6A 'C' series SP MCB, connector, and suitable size foundation bolts with template as required.(but without pole foundation) 0.00

288 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required. 0.00

289 9.16 Providing and making of following sizes octagonal street light pole foundation in reinforced cement concrete 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size ) of specified size including PVC conduit, form work, curing, reinforcement, excavation and refilling etc. as required. 0.00

9.16.2 For 6/7 metre pole (500mm X 500mm X 1400mm) 14 each 4,398.00 61,572.00

290 1.15 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required. 0.00

291 2.1 Providing and fixing following capacity double pole/ TP&N sheet metal switch disconnector fuse unit in the existing metal panel board with rewireable type fuses including drilling holes in metal panel, making connections etc. as required. 0.00

2.1.3 63 Amp, double pole 1 each 4,463.00 4,463.00

292 DSR 24.1 Oil Type 33/0.433 KV, 3 Phase, 50 Hz outdoor/ indoor mounting (Mineral oil filled) 24.1 Supplying installation testing and commissioning of following capacity (continuous loading) BEE 3 Star rated (Corresponding Level as per BIS amended upto date of receipt of tender) , 33/0.433 KV step down, 3 Phase, 50 Hz, Dyn 11 vector group, ONAN (Oil Natural Air Natural) copper wound transformer (Electrolytic grade 99.9% pure copper, Core made of first grade Cold Rolled Grain Oriented (CRGO) Core grade MOH or better, suitable for out door/indoor applications with On Load Tap Changer (OLTC) on HV side having AVR relay and Remote Tap Changer Control (RTCC) for automatic sensing of incoming voltage, automatic operation of OLTC and facility for remote and manual operation of OLTC HV side in range of +5% to -15% in steps of 2.5%, having cable end boxes on HV side suitable for 3x400 sq.mm XLPE cable of 33 KV grade, including bus trunking arrangement on LV side including supplying and laying of copper conductor multicore control cable from transformer to HT breaker/panel for safety tripping, complete with all accessories and safety provisions as per relevant IS Code including first filling of filtered dehydrated oil, i/c supplying and grouting of suitable M.S. Channel with all accessories and transformer shall be confirming to IS : 2026 (Part 1 to Part 5), IS : 1180 and as per CPWD specifications complete in all respects etc as required at site. The maximum flux density in any part of the core and yoke at rated voltage and frequency shall be such that the flux density with + 12.5 percent combined voltage and frequency variation from rated voltage and frequency does not exceed 1.9 Tesla. The permissible temperature-rise shall not exceed 35 0C for oil and 40 dg. C up to 200 KVA and 40 0C for oil and 45 dg. C for above 200 KVA for winding. Inside of tank shall be painted with varnish or liquid resistant paint. For external surfaces one coat of thermo setting powder paint or one coat of epoxy primer followed by two coats of polyurethane base paint shall be used. IS: 1180 (Part 3) shall be referred to for paint thickness 0.00

for normal to medium corrosive atmosphere. For highly polluted atmosphere and special application external paint work shall be as per direction of Engineer-in-Charge. Design ambient condition: a) air temperature 50 0C, b) Relative Humidity 90 % Max, c) Seismic Zone as per location of site, d) Altitude as per location/site. Noise level Shall not exceed limits as per NEMA TR-1 with all accessories running measured as per IEC 551 / NEMA standard. The transformer should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc. Marking Each transformer shall be provided with rating plate made of anodized aluminium/ stainless steel material securely fixed on the outer body, easily accessible, as per IS: 1180 Part-3. The entries on the rating plate shall be indelibly marked.

Fitting and Accessories : The following fittings shall be provided:- a) Two earthing terminals with the earthing symbol b) Oil level gauge indicating oil level at minimum, 30°C and maximum operating temperature; c) Air release device (for non-sealed type transformers) d) Rating and terminal marking plates; e) Silica gel breather f) Drain-cum-sampling valve (¾″ nominal size thread, IS 554) preferably steel with plug for three phase transformers; g) Thermometer pocket with cap; h) Oil filling holes having (1¼″ nominal size thread) with cover (for sealed type transformers without conservator); i) Lifting lugs for the complete transformer as well as for core and winding assembly; j) Pressure relief device or explosion vent above 200 kVA; k) One filter valve on the upper side of the tank (for transformers above 200 kVA); l) Unidirectional flat rollers (for transformers above 200 kVA); m) Inspection hole (for transformers above 200 kVA); n) HV side neutral grounding strip (where one of the HV bushing terminal is connected to earth); o) Buchholz relay for transformers above 800 kVA. p) Arcing horns or suitable rating lightning arrestors for HT side – 3 Nos. q) Bird guard; r) Oil temperature indicator and winding temperature indicators for transformers above 200 kVA with suitable tripping mechanism above permissible limit s) Jacking pads (for transformer above 1 600 kVA); t) Additional Neutral separately brought out on bushing for earthing. u) Magnetic oil level gauge (for transformer above 1600 kVA) with low oil level alarm

contact; v) Non return valve (for conducting pressure test); w) Pressure relief device or explosion vent x). Monogram Plate y) Inspection cover z). Detachable type radiators with top and bottom shutoff valve. aa) Oil Conservator with Oil level indicator, minimum level marking and drain plug for all transformers of capacity 50 KVA and above. bb) Necessary hardware, clamps, lugs etc. for termination on HV/MV etc. for all transformers.

24.1.1 500 KVA, copper wound, Energy Efficiency Level-2 1 each 1,328,495.00 1,328,495.00

293 8.3 Providing and making steel pole collar with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 stone aggregate 20 mm ) of specified size and shapeincluding form work, plastering if required, curing etc. as required. (volume of pole/pipe not to be deducted)(4mx4mx2m) 32 CUM 7,501.00 240,032.00

294 NS Providing and fixing carbon dioxide (CO2) type fire extinguishers confirming to IS 2878: 1976 and cylinders fully charged of following capacity. 0.00

295 NS Supply and fixing of foam fire extinguishers, Portable type 9 lit capacity hanged on wall with bracket complete as required 3 Each 11840.000 35,520.00

296 NS Supply and fixing safety instruction chart in word duly framed with 5 mm thick glass as required. (approx. front area 1.20 sq. mt.) 3 Each 980.000 2,940.00

297 NS Providing of set of 4 Nos. 9.5 Litre capacity GI bucket painted in post office red colour with prior coat of red oxide paint and written with white paint 'FIRE' and mounted on MS angle iron frame with bracket of appropriate size & capacity i/e filling sand etc. 6 Each 1180.000 7,080.00

298 NS Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 15 KV dielectric strength as per IS 5424: 1969 6 Each 4120.000 24,720.00

299 NS Providing of rubber mat 1 mtr. wide and 12 mm thick to withstand 1.1 KV dielectric strength as per IS 5424: 1969 6 Set 3,820.00 22,920.00

300 NS Supply of Hand Gloves 11KV Tested 6 Meter 825.00 4,950.00

301 NS Supply & fixing of Double Pole Structure( 9 meter PSC) for installation of CT/PT unit alongwith AB Switch, Horn Gap Fuse Set, HT Lighting Arrestor, Channel, earthing, civil work etc as required as per site. 1 P/Set 85000.000 85,000.00

302 7.8 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power H.T. cable with aluminium conductor for working voltage upto 11 KV as required.

303 NS Earth digging by horizontal directional drilling (HDD) method, Laying, termination/Jointing, Erection, Testing & Commissioning of 33 KV grade 3-Core 120 sq.mm XLPE Cable underground using HDPE Pipe complete in all respect along with all accessories, earth 195 Meter 966.00 188,370.00

304 7.40 Laying and fixing of one number PVC insulated and PVC sheathed /XLPE power cable of 1.1 KV grade of following size on wall surface as required.

7.4.3 Above 95 sq. mm and upto 185 sq. mm (Clamped with 25/40 x 3 mm MS flat clamp) 180 Meter 124.00 22,320.00

7.4.4 Above 185 sq. mm and upto 400 sq. mm (Clamped with 40 x 3 mm MS flat clamp) 60 Meter 171.00 10,260.00

305 9.13 Providing , laying and fixing of following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and re-filling etc as required.

306 DSR-11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 0.00

307 DSR-11.1 Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 0.00

308 DSR-10.4 supplying and making indoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required : 0.00

309 2.21 Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel at least 2 mm thick, vitreous enameled white on both sides, and with inscription in single red colour on front side as required. 2 Each 239.00 478.00

310 DSR 29.1.12 29.1 Supplying, Installation, Testing & Commissioning of ‘Silent Type Diesel Generating set as per CPCB IV + or better norms along with having Prime Power Rating of KVA as below, 415 volts at 1500 RPM, 0.8 lagging power factor at 415 V suitable for 50 Hz, 3 phase system & for 0.85 Load Factor, including testing at factory and site with fuel, load for test and other necessary arrangements Complete as per CPWD specifications, should have QR code which should contain drawing, test report OEM manual,Geo- Tag of manufacturing location, rating plate as per relevant IS Code etc. and consisting of the followings: (A) Diesel Engine: Tourbocharged Diesel engine 4 stroke water cooled, multi cylinder, dynamically balanced fly wheel, electric start of suitable BHP at 1500 RPM suitable for above output of alternator at 40 0C, 50% RH & at 1000 Meter MSL , capable of taking 10% over loading for one hour after 12 hours of continuous operation. The engine will be with Electronic governor, Dry type Air filter with service indicator, first filling of engine fuel (after commissioning) lubricating Oil, Coolant and other consumables complete with all the required accessories, the Electronic governor shall be as per ISO 8528.The engine shall comply to the latest CPCB norms (CPCB IV + or better) and Conforming to BS 5514, BS 649, IS 10000, IS 10002, IS 13018 and as per CPWD specifications. 0.00

(B) Engine mounted Instrument Panel fitted with and having digital dis Plate for following:

(i) Start-stop switch with key (ii) Water temperature indication (iii) Lubrication oil pressure indication (iv) Lubrication oil temperature indication (v) Battery charging indication and Voltage indication (vi) RPM indication (vii) Over speed indication (viii) Low lubricantion Oil trip indication (ix) Engine Running Hours indication (x) Fuel Level

(C) Alternator: Synchronous alternator rated of appropriate KVA, 415 volts at 1500 RPM, 3 phase 50 Hz, AC supply with 0.8 lagging power factor at 40 0C, 50% RH & at 1000 Meter MSL. The alternator shall be having Screen Protected Drip Proof (SPDP) enclosure IP23, brushless, continuous duty, dynamically balanced rotor, capable of taking 10% over loading for one hour after 12 hours of continuous operation, self cooled,self-excited and self-regulated through AVR conforming to IS13364(Part 2)/IS: 4722/BS 2613 suitable for tropical conditions and with class- H insulation. (D) Base Frame & Foundation:

Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer. (E) FUEL TANK:

Daily service fuel tank of suitable liters capacity as per CPWD Specifications, fabricated out of 3 mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class ‘C’ pipes of suitable dia. Complete with valves, level indications & accessories as required as per specifications. (F) Exhaust System:

Dry exhaust manifold with hospital type exhaust silencer and catalytic convertor. (G) Starting System:

12V/24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with suitable numbers of batteries (180 AH capacity lead acid SMF type) as required as per specifications. The battery shall be housed inside the acoustic enclosure of DG Set.

(H) Acoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air in to the atmosphere and the temperature rise inside the enclosure, noise level outside enclosure. The acoustic enclosure should be suitable for cable connection/connection through bus-trunking. Such arrangements on acoustic enclosure should be water proof & dust-proof conforming to IP-65 protection. The enclosure shall be as per CPCB IV + or better norms etc. and as per CPWD specifications. (I) AMF Panel:

Free standing floor mounted IP 42 automatic mains failure control panel including auto by-pass, suitable for KVA as below for silent type DG set complete with relays, timers, set of CTs for metering & protection and energy analyser to indicate currents, phase and line voltages, frequency, power factor, KWH, Kilo Volt Ampere Reative Hour (KVARH), KVA (Phase & Total), KW & provision for overload, short circuit, restricted earth fault, under frequency, power (aluminium) and control (copper ) cabling of suitable size upto 15 meter between AMF panel, LT Panel and DG Set including connection interconnection etc. as required, all complete and inter locking and communication/ Ethernet /RS485/SNMP port open protocol for BMS integration including suitable software, the panel shall be of DG Set OEM make etc. as per approved by Engineering in charge and including the following: 1. Suitable numbers and appropriate capacity 4 pole motorised electrically operated draw out with cradle type 3 position ACB/ MCCB with electronic release for O/C & E/F and shunt trip. 2. Auto/Manual/Test/Off selector switch 3. Protection for under and over voltage phase reversal (2 nos Over voltage relay, 2 Nos. reverse power relay and 2 Nos. under voltage relay). 4. 3 Sets of current transformers 15 P 10 accuracy for protection and 15 VA class-I for metering 5. Energy analyser unit to indicate current, Voltage( L- N & L_L), kW, kVA (Phase & Total), Frequency, KWH, PF. 6. LED Indicating lamps for load on mains and load on set 7. Fuse/ MCB for instruments 8. Battery charger, complete with transformer/ rectifier,

D.C. voltmeter and ammeter, selector switch for trickle, off and boost and current adjustment. 9. Main supply failure monitor 10. Supply failure timer 11. Restoration timer 12. Control unit with three impulse automatic engine start/stop and failure to start lockout. 13. Impulse counter with locking and reset facility. 14. ON/OFF/Control circuit switch with indicator 15. Audio/Video annunciation for (i) High water temperature (ii) Low lubricating oil pressure (iii) Engine over speed (iv) Engine fails to start (v) Full load/maximum load warning 16. Protection for over/under Frequency, Loss of AC sensing, Over Current, Unbalancing load with suitable number of relays and accessories 17. Maintenance notification based on Engine Run Hour & due date. 18. Load Management through PLC to achieve auto opening and closing of incomer breakers, bus coupler switching of essential panel , interlocking providing signal to AMF Panel for load status and AMF shall give command to DG Set to auto start / auto stop depending upon load status and requirement etc. and necessary hardware and software required to perform the operation shall be provided by the contractor including all control wiring. 29.1.1 25KVA Each 403101 29.1.2 35KVA Each 446290 29.1.3 40KVA Each 532669 29.1.4 50KVA Each 565061 29.1.5 62.5KVA Each 597453 29.1.6 82.5KVA Each 741418 29.1.7 100KVA Each 863788 29.1.8 125KVA Each 885383 29.1.9 160KVA Each 1249613 29.1.10 200KVA Each 1547620

311 9.10 Providing and laying in position reinforced cement concrete 1: 2: 4 (1 : cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc. as required. (excluding reinforcement) (5mx3mx2m) 30.00 cum 8,721.00 261,630.00

CENTRALIZED AC PLANT

312 33.10 SITC of VFD operated Air Cooled Type Screw Chiller Package Unit

313 Supplying, installation, testing and commissioning of following capacity Air-Cooled (suitable for out door installation) Screw Chiller package complete with VFD (Variable Frequency Drive), hermetic/semi hermetic, screw type compressor each with step less capacity control of 25 % to 100 % of the rated capacity, with microprocessor based control panel compatible for BMS operation, motor, starter panel (VFD), machine mounted, air- cooled condensers with Copper tube and Aluminium fins, factory fitted chiller insulation, water flow switch, vibration spring Isolators, victaulic couplings, integral refrigerant piping and wiring with single/ two circuits, automatic and safety controls mounted in central console panel and all mounted on a steel frame (complete as per specifications) i/c suitable foundation/mounting structure made of RCC/MS Structure i/c anticorosive paint, anti vibration pad, power control cable and connection inter connection etc. as per design approved by engineer-in-charge. Motor shall be suitable for 415±10% 50 cycles. 3 phase AC supply. Refrigerant gas used shall be R-134A. The chiller shall be Building Management System (BMS) compatible The system shall be in confirmation to IS : 16590, BEE Star labeling and CPWD Specification as amended upto date and tested as per IS 16590. Chilled water Leaving Temp. (6.67 0C) Chilled water Entering Temp. (12.2 0C) Evaporator fouling factor = 0.018 m2. 0C/kW Condenser air entering temp. : As per Site Dry Bulb Temperature Suitable for Seismic Zone and Altitude as per location/site. 390 TR(130*3) 2W+1S 27,413 10,691,070.00

33.1.3 Actual Capacity – 130 TR @ 39.0°C Out side Condition Chilled Water In – 54⁰F/12.2⁰C Chilled Water Out – 44⁰F/6.67⁰C Chilled Water Flow – 312 USGPM Chiller Fouling Factor(FT2 hr ⁰F/BTU) – 0.0005 0.00

314 MR-2 Plant Room Manager System 0.00

Supply, installation, testing and commissioning of Chiller Plant Room Manager system. Chiller Plant manager which can control in totality, which can perform sequencing, scheduling, load sharing, etc., based on the demand and also it should be possible to control primary chilled water pump sets and related 2 way valves, Flow Switch of equipments. Necessary controller hardware Software control wiring conduits should be included under the part of scope. By pass line 2 way valve OR Motorised Butterfly Valve and flow swith in scope of chiller supplier. 1 No. 3,500,000 3,500,000.00

315 NS PUMPS : 0.00

NS Primary Chilled Water Pumps 0.00

316 Supply, Installation, testing and commissioning of Primary Cum Secondary Chilled Water centrifugal pumps. The pumps shall be long coupled end suction pumps. The Centrifugal pump sets will be with suitable TEFC, IE-3 electric motor for circulation of chilled Water for central air-conditioning system. The pumps shall be provided with EN-733 Shaft, SS/bronze impeller & Mechanical seals. All pumps shall be fixed on power coated M.S. frame structure with base plate of pumps. The pump motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase power supply. The price of pump shall also include the cost of thermal insulation with cladding suitable for outdoor installation, anti-vibration pads, channel base, cabling, coupling guard etc., and suitable for following ratings as per specifications. the motor shall be suitable for operation with VFD. The noise level of the Pumps should be suitable for the animal house. If sound control will require a sound blanket and a sound barrier wall, add it to this scope. The sound blankets will be removable Velcro-sealed. The sound blanket and sound barrier wall shall be suitable for outdoor installation. The scope of work shall include Lifting, shifting & positioning of pump at location shown on drawing. The Pump set shall be placed on the inertia block with spring isolators. All Civil works including Pedestals shall be in the scope of AC Contractor. Minimum below mention Pump's head shall be considered. However, actual total pump's head shall be calculated and confirmed by the vendor at the time of bidding. Note:- Pump, Controller, Sensor, AFD etc. all shall be sourced from single supplier. Pump performance characteristics shall be suitable for parallel operation as follows:- 0.00

Water Flow Rate : 480 USGPM Head : 20 to 30 M Protection Class : IP 55 Speed : 1450 RPM Motor : 22 kW / As per manufacturers recommendation (2 Working + 1 Stand BY ) 3 Nos. 754,685 2,264,055.00

Suggested Pump Motor - 25 HP 0.00

317 NS Secondary Chilled Water Pumps 0.00

318 NS Supply, Installation, testing and commissioning of Primary Cum Secondary Chilled Water centrifugal pumps. The pumps shall be long coupled end suction pumps. The Centrifugal pump sets will be with suitable TEFC, IE-3 electric motor for circulation of chilled Water for central air-conditioning system. The pumps shall be provided with EN-733 Shaft, SS/bronze impeller & Mechanical seals. All pumps shall be fixed on power coated M.S. frame structure with base plate of pumps. The pump motor shall be suitable for 415 ± 10% volts, 50 cycles, 3 phase power supply. The price of pump shall also include the cost of thermal insulation with cladding suitable for outdoor installation, anti-vibration pads, channel base, cabling, coupling guard etc., and suitable for following ratings as per specifications. the motor shall be suitable for operation with VFD. The noise level of the Pumps should be suitable for the animal house. If sound control will require a sound blanket and a sound barrier wall, add it to this scope. The sound blankets will be removable Velcro-sealed. The sound blanket and sound barrier wall shall be suitable for outdoor installation. The scope of work shall include Lifting, shifting & positioning of pump at location shown on drawing. The Pump set shall be placed on the inertia block with spring isolators. All Civil works including Pedestals shall be in the scope of AC Contractor. Minimum below mention Pump's head shall be considered. However, actual total pump's head shall be calculated and confirmed by the vendor at the time of bidding. Note:- Pump, Controller, Sensor, AFD etc. all shall be sourced from single supplier. Pump performance characteristics shall be suitable for parallel operation as follows:- 0.00

Water Flow Rate : 312USGPM Head : 20 to 30M Protection Class : IP 55 Speed : 1450 RPM Motor : 11.5 kW / As per manufacturers recommendation (2 Working + 1 Stand BY ) 3 Nos. 755,967 2,267,901.00

Suggested Pump Motor - 20 HP 0.00

319 NS SITC of Control VFD Panel for primary variable system for Suitable for outdoor installation (Suitable three number primary cum Secondary pumps.) ●Each pump shall be provided with microprocessor based pump logic controller having 10" touch screen operator interface, with pumping software duly downloaded . ●Each pump shall be provided with a variable frequency drive of suitable capacity with ventilated housing & mounting. ●In case the pump controller is "in built" in the VFD, separate pump controller will not be required. ●controller bypass facility shall be provided. for which, separate bypass panel if required, shall be provided. ●Required differential pressure/sensor/transmitters as necessary and signal as acceptable to pump controller shall be provided with each pump. Location of sensors shall ensure adequate flow in all other areas, in case of reduced flow requirement in anyone or more areas. If required additional sensors/transmitters shall be installed on the piping network. The pumps & variable water pumping system shall be as described in specifications and drawings, suitable for following ratings. 1 Nos. 869,534 869,534.00

320 NS Closed Pressurised Expansion Tank With Centrifugal Air Separator 0.00

Supply, installation, testing and commissioning of Closed 1. Pressurised Expansion Tank with replaceable heavy duty & butyl bladder for chilled water system & Centrifugal Air separator along completely assembled on skid with valves & manifoldsands. Complete with Valves for Makeup with all accessories and fittings. Tank & Air Separator with Insulated require thickness (Minimum 75 MM) duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu.m after a thick coat of cold setting adhesive (CPRX compound) wrapping with 500g polythene faced hessain and finally applying 0.8mm aluminium sheet cladding complete with type3 , grade 1 roofing feltstrip(as per IS:1322 as amended up to date ) . as per specifications and drawings. Pressurised Expansion Tank : Capacity 400 to 500 ltrs.( Nearest standard size of Manufacture) & Centrifugal Air Separator-inlet/outlet- 150 mm (tangential & flanged) 1 Job 856,325 856,325.00

321 NS SITC of AIR HANDLING UNITS 0.00

DSR 30.26 Supply, Installation, Testing and commissioning of factory built Ceiling suspended OR Floor Mounted chilled water double skin type air handling units made of 25mm thick panels consisting of pre plasticized G.I. casing of thickness 0.8mm outside layer and 0.8 mm inside layer with polyurethane foam (PUF) 40±2 kg/m3 density insulation factory injected between them by injection moulding machine, complete with blower section with Plug type Fans suitable for static pressure as required, cooling coil section with aluminium finned copper tubes (tubes thickness not less than 0.5mm) cooling coil of 6 row deep, filter section with 50mm thick metal viscous/ washable synthetic type air prefilters, aluminium damper on the outlet of AHU, fire retardant double canvas connections, belt drive package with TEFC drive motor of efficiency class IE3 suitable for 415 ± 10% volts, 50Hz, 3 Phase AC supply suitably designed for variable frequency drive applications, drain connections, stainless steel (18G) drain pan with PUF insulation, 150 mm dia. dial type pressure gauges (2 nos.) and industrial type thermometers (2 nos.) at the inlet and outlet of coil, auto purge valve wherever required, necessary vibration isolation arrangement etc. Filters shall have efficiency of 90 % down to 10 micron as per ASHRAE standard. AHU should be designed in such a way considering 20 to 30% clogged filters. AHU noise should be below 55 dB(A) after the AHU. If any acoustic lining required for reducing the noise, so provide inside the AHU of the same. complete as per specification and of following capacities. 0.00

CASSETTE FAN COIL UNIT 0.00

322 35.3 Supplying, installation, testing and commissioning of Chilled Water Ceiling Suspended Hydronic Cassette type fan coil unit, four(4) way directional flow, low noise, each complete with two(2) rows of deep chilled water cooling coil, multi-blade centrifugal fan, test reports from National Accreditation Board for Testing and Calibration Laboratories (NABL)/AHRI accerdited lab, electronic air cleaning system, required set of ball valves with & without strainers & 2 way Motorized valve, insulated condensate drain pans with drain pump assembly & drain pump failure alarm, pipe connections through copper pipes, Infra-red remote control, Liquid Crystal Display (LCD), four (4) speed motor , fan four(4) direction air flow, auto swing louver, decorative panel etc., condensation drain connections, All units shall be suitable for 220 +/- 10% Volts, 50 Hz, single phase power supply etc. complete as per specification. The wireless Remote temperature control / thermostat shall have memory back up for set point re-store in case of power failure and re-start. Four(4)hanger rods with required anchoring fasteners, hooks, washers etc.complete as per CPWD specification and as directed by Engineer-in-charge. 0.00

35.3.1 4.0 TR nominal capacity with 1600 CFM air quantity. 34 Nos 46,817 1,591,778.00

323 DSR-30.2 INSULATED CHILLED WATER PIPING (Nitrile rubber insulation) Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping inside the building (with necessary clamps, vibration isolators and fittings but excluding valves, strainers, gauges etc.) duly insulated with following closed cell elastometric nitrile rubber of minimum 45 Kg / cu m density, thermal conductivity 0.037 W/MK or better at 20 deg mean temperature class 'O' insulation applied by suitable adhesive complete including repairing of damage to building etc. as per specifications and as required complete in all respect. Note:- The Pipes of sizes 150mm & below shall be M.S. 'C' class as per IS : 1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589, from minimum 6.35mm thick M.S.Sheet for pipes upto 350 mm dia. and from minimum 7mm thick MS sheet for pipes of 400 mm dia and above. 0.00

30.2.5 200mm dia. (32 mm thick insulation) 80 RMTs 7,467 597,360.00

30.2.6 150mm dia. (32 mm thick insulation) 110 RMTs 5,089 559,790.00

30.2.7 125mm dia.(32 mm thick insulation) 85 RMTs 4,456 378,760.00

30.2.8 100mm dia. (32 mm thick insulation) 120 RMTs 3,556 426,720.00

30.2.9 80mm dia.(32 mm thick insulation) 140 RMTs 2,656 371,840.00

30.2.10 65mm dia(32 mm thick insulation) 110 RMTs 2,139 235,290.00

30.2.11 50mm dia(32 mm thick insulation) 95 RMTs 1,859 176,605.00

30.2.12 40mm dia(32 mm thick insulation) 95 RMTs 1,510 143,450.00

30.2.13 32 mm dia(19 mm thick insulation) 95 RMTs 1,321 125,495.00

30.2.14 25 mm dia(19 mm thick insulation) 95 RMTs 1,110 105,450.00

324 DSR-30.1 INSULATED CHILLED WATER PIPING (expanded polystrene insulation) Supplying, laying/ fixing, testing and commissioning of following nominal sizes of chilled water piping plumbing inside the building (with necessary clamps,vibration isolators and fitting but excluding valves,strainers ,gauges etc. )duly insulated with fire retardant quality expanded polystrene moulded pipe section of density 20 kg/cu m.after a thick coat setting adhesive (CPRX compound )wrapping with 500g polythene faced hessain and finaly applying 0.63mm aluminium sheet cladding complete with type 3,grade 1 roofing feltrip(as per IS: 1322 as amended up to date)at joints repairing of damage to building etc.as per specifications and as required complete in all respect. Note:-The pipes of sizes 150mm & below shall be M.S. 'C' class as per IS:-1239 and pipes size above 150mm shall be welded black steel pipe heavy class as per IS: 3589,from minimum 6.35mm thick M.S. sheet for pipes up to 350mm dia.and from minimum 7mm thick MS sheet for pipes of 400mm dia and Above 0.00

30.1.5 150mm dia. (75 mm thick insulation) 80 RMTs 5,991 479,280.00

30.1.6 125mm dia. (75 mm thick insulation) 75 RMTs 5,093 381,975.00

325 30.7 INSULATED VALVES Supplying, fixing, testing and commissioning of following valves, strainers, gauges in the chilled water plumbing duly insulated to the same specifications as the connected piping and adequately supported as per specifications. 0.00

BUTTERFLY VALVE (MANUAL) with C I body SS Disc, Nitrile Rubber Seal & O- Ring PN 16 pressure rating for chilled water/hot Water circulation as specified 0.00

30.7.1.2 150mm dia. (expanded polystrene insulation with aluminium cladding as above mention ) 4 EACH 9,272 37,088.00

30.7.1.3 125mm dia. (expanded polystrene insulation with aluminium cladding as above mention ) 12 EACH 8,505 102,060.00

326 30.7.2 BALANCING VALVE WITH BUILT IN MEASURING FACILITY with C I body flanged construction with EPDM coated disc with long pitch with protected out pipe insulation & PN 16 pressure rating for chilled / hot water circulation as specified. 0.00

30.7.2.2 150mm dia. (expanded polystrene insulation with aluminium cladding as above mention ) 1 EACH 36,463 36,463.00

30.7.2.3 125mm dia. (expanded polystrene insulation with aluminium cladding as above mention ) 5 EACH 28,121 140,605.00

327 30.7.3 NON - RETURN VALVE with duel plate of C I body SS plates vulcanized NBR seal flanged end & PN 16 pressure rating for chilled / hot water circulation including insulation as specified. 0.00

328 30.7.4 Y - STRAINER of Ductile CI Body flanged ends with stainless steel strainer for chilled / hot water circulation including insulation as specified. 0.00

30.7.4.4 100 mm dia EACH 0.00

329 NS Supply, installation, testing and commissioning of flexible connections of suitable pressure rating to be installed at pump suction, discharge, Chiller Inlet & outlet and at pipes crossing building expansion joints as specified. (With Insulaion & Without Insulation) 0.00

330 30.11.4 Supply, Installation, Testing and Commissioning of following sizes electronic, self-balancing, pressure independent type dynamic balancing valve with integrated 2 way modualating control valve in a single body. The actuator shall be capable of accepting upto 10V DC and upto 20mA electric signal and shall provide similar transduced feedback output to control system. Maximum close off pressure shall not be less than 6 Bar for upto 50 mm valves and 7 Bar for 65 mm & above. Valves should have pressure rating of 25 Bar minimum.With Digital Thermostat 0.00

331 30.8 Providing and fixing in position the industrial type pressure gauges with gun metal / brass valves complete as required 12 EACH 1,491 17,892.00

30.9 Providing & fixing in position the mercury in glass industrial type thermometers. 15 EACH 1,132 16,980.00

332 NS Providing and fixing in position following ball valves without Y strainer for Chilled water as specified. 0.00

NS 32mm dia. With Insulaion 2 EACH 2,939 5,878.00

NS 25mm dia. With Insulaion 8 EACH 2,604 20,832

NS 25mm dia. With Insulaion 40 EACH 2,196 87,840.00

333 NS Supplying, installation, testing and commissioning of Auto air vents with vall valve for Chilled water & Condenser watar as specified. 0.00

NS 25mm dia. 16 EACH 2,465 39,440.00

NS 20mm dia. 20 EACH 2,096 41,920.00

334 NS SIT of Drain Pipes Of AHUs, FCU & Cassette Unit :Supplying, laying, fixing, testing & commissioning of Rigid PVC Pipes pipes of Minimum 6 kg/sqcm, duly insulated with 9 mm Thick Nirtile rubber pipe section, complete with all necessary fittings such as elbows, tees, reducers, serviceable P traps. etc and supports such as clamps etc complete as per specifications RMTs 0.00

NS 50 mm dia 60 RMTs 310 18,600.00

NS 40 mm dia 50 RMTs 260 13,000.00

NS 32 mm dia 55 RMTs 190 10,450.00

NS 25 mm dia 63 RMTs 170 10,710.00

DUCTING, GRILLS, DIFFUSER AND INSULATION 0.00

335 30.12.1 Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.00

30.12.1.1 Thickness 0.63 mm sheet 1150 sqm 1,191 1,369,650.00

30.12.1.2 Thickness 0.80 mm sheet 420 sqm 1,382 580,440.00

30.12.1.3 Thickness 1.00 mm sheet 120 sqm 1,488 178,560.00

30.12.1.4 Thickness 1.25 mm sheet 15 sqm 2,013 30,195.00

336 30.12.2 Supply, installation, balancing and commissioning of fabricated at site GSS sheet metal rectangular/round ducting complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required. 0.00

30.12.2.1 Thickness 0.63 mm sheet 90 sqm 1,213 109,170.00

30.12.2.2 Thickness 0.80 mm sheet 75 sqm 1,415 106,125.00

30.12.2.3 Thickness 1.00 mm sheet 30 sqm 1,851 55,530.00

30.12.2.4 Thickness 1.25 mm sheet 22 sqm 2,063 45,386.00

337 30.13 Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etc, as per specifications 20 sqm 7,580 151,600.00

30.15 Supplying & fixing of powder coated extruded aluminium Supply Air Grills with aluminium volume control dampers as per specifications. 6 sqm 9,623 57,738.00

338 30.18 Supplying & fixing of powder coated extruded aluminium Return Air Grills with louvers but without volume control dampers complete as required. 26 sqm 6,285 163,410.00

339 30.19 Supplying, fixing testing commissioning of supply air diffusers of powder coated aluminium with aluminium volume control dampers with anti smudge ring & removable core. (Round type & Square type) 10 sqm 5,200 52,000.00

340 NS Supply, installation, testing & commissioning of thermal insulated flexible duct of following sizes duly supported at regular interval as per site requirement etc. complete as required as per specifications. 0.00

NS 250mm OR 300 mm dia 135 Each 6,520 880,200.00

341 NS Jet Round Diffusers Makes:-Dyna Craft, Caryaire, Systemair, Air Flow ,Cosmas Supply, installation, testing and balancing of Jet Round supply/Return air diffusers with removable core and extruded Aluminium volume control dampers.The diffusers shall be powder coated as per approved shade of colour.Sample to be submitted for prior approval. Each diffuser shall be equipped with removable key for damper operation. 0.00

Extruded Aluminium powder coated Jet round Supply air diffusers with VCD 0.00

342 NS Diffuser size-dia250MM / 315 MM 40 Each 7,120 284,800.00

343 NS SITC of Butter Fly Dampers 20 GI Sheet Construction- Single Flap -250 mm dia 40 Each 3,444 137,760.00

344 30.2 Supplying, Fixing,testing and commissioning of fire dampers in supply air duct/main branch and return air path as and where required of required sizes i/c control wiring,the damper shall be motorized and spring return so as to close the damper in the event of power failure automatically and open the same in case of power being restored. The spring return action shall be inbuilt mechanism and not externally mounted. The damper shall also be closed in the event of fire signal complete as required and as per specifications. 0.00

345 30.21 Supply and fixing of acoustic lining of supply air duct and plenum with 25 mm thick resin bonded glass wool having density of 32 kg/m³, with 25 mm X 25 mm GI section of 1.25 mm thick, at 600 mm centre to centre covered with Reinforced Plastic tissue paper and 0.5 mm thick perforated aluminum sheet fixed to inside surface of ducts with cadmium plated nuts, bolts, stick pins, CPRX compound etc. complete as required and as per specifications. 450 Sqm. 890 400,500.00

346 30.22 Supplying, fixing acoustic lining on wall and ceiling of AHU rooms with 50mm thick, density 32 kg/cu.m resin bonded glass fiber insulation friction fixed in 610mm x 610 mm frame work made of 25X50X50X50X25 mm made out of 0.6mm thick GI sheet U shaped channel and covered with reinforced fiber glass tissue and finished with 0.80 mm perforated aluminium sheet etc. complete as required and as per specifications. 230 Sqm. 1057 243,110.00

347 30.23 Supplying and fixing of following thickness duly laminated aluminum foil of mat finish closed cell Nitrile rubber (Class "O") insulation on existing duct after applying suitable adhesive for Nitrile rubber. The joints shall be sealed with 50 mm wide and 3 mm thick self adhesive nitrile rubber tape insulation complete as per specifications and as required. 0.00

AIR CONDITIONING SYSTEM-AC UNITS(PART 'B') 35,961,096.00

AUDIO, VIDEO & LIGHTING

348 NS Biamplified, 2/3 Way Loudspeaker Array for stage Left position. Individual loudspeaker modules within the array shall meet the following performance criteria: Usable Frequency Range (-10dB) of 55 Hz - 18 kHz Continuous Power Handling of >=600W for LF & 150W for MF-HF. There shall be LF driver of at least 1x14" or 2x10" in each module, and at least 4 drivers for MF/HF. The Loudspeaker shall have a Max. SPL (Peak) of >=128 dB or better for LF and 131dB for MF-HF. It should have Horizontal dispersion pattern of 90º or better (with multiple waveguide options & Vertical dispersion of the array shall be 70 degrees or better (with at least 3 Array modules). The loudspeaker module shall be comprised of a shall be of Baltic birch plywood construction with IP55 weather rating. Bidder should ensure to offer suitable number of modules to meet the desired vertical angle requirement. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 2 each 284930 569860

349 NS Biamplified, 2/3 Way Loudspeaker Array for stage Right position. Individual loudspeaker modules within the array shall meet the following performance criteria: Usable Frequency Range (-10dB) of 55 Hz - 18 kHz Continuous Power Handling of >=600W for LF & 150W for MF-HF. There shall be LF driver of at least 1x14" or 2x10" in each module, and at least 4 drivers for MF/HF. The Loudspeaker shall have a Max. SPL (Peak) of >=128 dB or better for LF and 131dB for MF-HF. It should have Horizontal dispersion pattern of 90º or better (with multiple waveguide options & Vertical dispersion of the array shall be 70 degrees or better (with at least 3 Array modules). The loudspeaker module shall be comprised of a shall be of Baltic birch plywood construction with IP55 weather rating. Bidder should ensure to offer suitable number of modules to meet the desired vertical angle requirement. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 2 each 265800 531600

350 NS Supply, installation, testing & Commissioning of OEM array frames/ Hanging/ Mounting arrangement for Suspension of upto 8-10 array modules offered above, Shall offer multiple rigging points for achieving desired pitch settings alongwith OEM array frame pull back hardware for extreme pitch angles. The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 4 each 154985 619940

351 NS Supply, installation, testing & Commissioning of 18" arrayable subwoofer having a Freq. Range of 29Hz - 300Hz. It should have an ground stack position Sensitivity of > = 98dB (1W/1m) or more delivering a ground position Max. Calculated SPL(peak) of >=135 db. The loudspeaker should have a nominal impedance: 4ohm or more and continuous AES Power Handling of 1250W or more. Shall be enclosed in Baltic birch plywood with standard Array rigging hardware for Cardioid as well as stacked position. The subwoofer shall have the same footprint as the main array speakers and shall have provision for suspending on top of main LR arrays. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 2 each 489591 979182

352 NS Supply, installation, testing and commissioning of two-way 5.25-inch or better high SPL surface mount loudspeaker. The louspeaker shall meet the following performance criteria: Frequency Range (-10 dB) of 90Hz - 18 kHz or better; Nominal Dispersion : 90°H x 80°V or better; Power handling of 400W peak or more; Sensitivity : 86 dB or better and the Max SPL : 116dB Peak or more with a Nominal impedence of 8 ohms and Integral multi-tap Transformer with selectable tap settings of 10/20/40/80W@70V & 100V; Standard wall mount brackets shall be included. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 4 each 87470 349880

353 NS Supply, installation, testing & Commissioning of Low profile High SPL Delay Fills loudspeakers with 2x6" LF Driver & 1.5" or better VC compression driver; Frequency Range of 80 Hz - 16 kHz or better; Nominal Dispersion : 120°H x 60°V; Long term Power handling of 200 W or better, Peak 800W or Better ; Sensitivity : 92 dB; Max SPL : 122dB Peak; Nominal Impedance : 8?; 18-gauge (1.2 mm) perforated steel; Powder-coated finish grille with Two-part spray polyurethane coating Enclosure. Shall include In-box 100W OEM Input transformer kit for Distributed system The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 6 each 73650 441900

354 NS Supply , installation , testing and commissioning of Digital Dante Amplifier with Max output power of 4x1200W@4-8Ohms, 70V or 100V or bridged mode output power of 2x3000W@4ohms. Frequency response of 20 Hz - 20 kHz, SNR of >110 dB(A and THD+N < 0.1%. With Multiple channel metering LED and attenuation controls. PEQ, band pass, Spkr EQ, limiter, delay. Maximum input level 20 dBu. 4 Digital channels via Dante, with Euroblock, 8-pin connectors for Analog outputs. Software and hardware controlled. Sample rate 24-bit, 44.1 kHz???192 kHz. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 3 each 346511 1039533

355 NS Programmable Audio DSP controller with Display and programmable encoder knobs Supply, installation, testing & Commissioning of Sound Reinforcement System - Networked and programmable controller; Power supply requirement of 15-24 VDC, 300mA; Four rotatory encoders with circular LED rings for managing gain setting or scene selection; Fifth encoder provides control over programmed scenes or presets; Two line by 40 character blacklit LCD provides names of the system elements they are controlling. The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 1 each 214300 214300

356 NS Supply , installation , testing and commissioning of Digital Audio Conferencing Processor with at least 12 Mic/Line inputs & 8 analog outputs and 12 CH AEC, 24 Bit A-D and D-A Convertors; Sampling Rate : 48 kHz; THD : < 0.002 % ; Channel Separation (Crosstalk) : < 108 dB ; Frequency Response 20 Hz - 20 kHz ; Signal-to-Noise Ratio 90 dB ;Dynamic Range > 115 dB; 5 Control Inputs and Outputs; RS-232 and Ethernet Port for third party Control and Monitoring; 64X64 or more Bidirectional DANTE Audio Networking ports, Shall include USB Audio as standard Feature. inbuilt DSP features like Conference room Routers, Input Equalizers, Router, Band Pass filter, Output Equalizer, Delay, Limiters, gates , Source selectors etc. Shall Support at least 15 remote Zone controllers The speaker, amplifier, and DSP will be from the same OEM The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Bose/ Bosch / JBL 1 each 385800 385800

357 NS 32 channel Analog Audio Mixer: SITC of Analog Audio Mixer with 32 line inputs ( 24 mono and 4 stereo ), With Reverb & Effects, 4 GROUP Buses + ST Bus, 6 AUX Sends + 2 FX Sends, 1 Matrix out, FX1:REV-X(8 PROGRAM, PARAMETER control)/ FX2:SPX(16 PROGRAM, PARAMETER control) on b-board processors; MIC: 24 (INPUTS HPF: 100Hz 12dB/oct), 48V phantom power per channel; LINE: 24 mono + 4 stereo, CH INSERT: 24 RETURN: 1 stereo; Digital I/O: USB Device, iPod / iPhone. Make- Bose/ Bosch / JBL / Yamaha 1 each 184200 184200

358 NS SITC of Wireless Handheld Microphone - with Handheld Transmitter, Transmission Power up to 30mW Dynamic cardioid capsule, 2-stage gain switch, Programmable mute button, Diversity Reciever Up to 40 MHz switching bandwidth, Frequency Response 45 to 15 KHz, Scan Function, BNC Antena, Active Channel 16 per frequency band & Audio dynamic range 106 dB Make- Bose/ Bosch / JBL 4 each 55600 222400

359 NS SITC of Wireless Lapel Microphone - with Beltpack Transmitter with clip on microphone Transmission Power up to 30mW, Miniature condenser clip-on microphone, omnidirectional, 4-pin mini XLR connector, Programmable mute button, Diversity Receiver Up to 40 MHz switching bandwidth, Frequency Response 45 to 15 KHz, Scan Function, BNC Antenna, Active Channel 16 per frequency band, Audio dynamic range 106 dB Make- Bose/ Bosch / JBL 2 each 58600 117200

360 NS SITC of Dynamic microphone (cardioid) for vocals, with On/Off switch - Dynamic Vocal Microphone Polar pattern: Cardioid Frequency response: 50 - 70,000 Hz 3-pin XLR male connection . Make- Bose/ Bosch / JBL 5 each 18500 92500

361 NS SITC of Floor mount box for Floor Monitor / Mic connectivity (2 x XLR/ Speakon) Make- Bose/ Bosch / JBL 4 each 4500 18000

362 NS SITC of Mic Boom Table stand Make- Bose/ Bosch / JBL 4 each 3650 14600

363 NS SITC of Mic Boom Floor stand Make- Bose/ Bosch / JBL 4 each 4850 19400

364 NS Mic/Audio and Control Cable: SITC of Single 20 AWG shielded twisted pair with drain wire high performance cable for serial control/audio signals, should be color-coded, tinned copper conductors wrapped in a foil shield, cable includes a tinned copper drain wire on the inside of the foil shield, which is bonded to the jacket for ease of stripping when used with automatic stripping equipment - single twisted pair only. 700 Mtrs 125 87500

365 NS Speaker Cable: Supply, Installtion, Testing & Commissioning of 14 AWG ATC copper conductor Speaker Cable in the existing conduit i/c connection ,interconnection etc complete as required and as per attached specifications or better 900 Mtrs 58 52200

366 NS Supply , Installtion, Testing & Commissioing of the Dual Core 4 sq mm Speakers Cable. 850 Mtrs 45 38250

367 NS Supply, Installtion, Testing, & Commissioning of Equipment rack with 600mm Width, 800 mm Depth and 36U Height, Min 8 Equipment Shelves comprising of tray with 150 kg load capacity having numerous slots for airflow circulation, 21no. 5A sockets depending on each power strip length, 4 mtr long cable for connection to 15 Amp power DP, Front toughened glass door and side metallic panels, Rear Door having facility to have air flow with rear ventilationpockets etc.To achieve std. cooling temp around 30 degree Celsius with Min 4 no 94CFM fans assuming the given BTU/hr around 4000.Required Lockable Castors with level adjusting feet i/c connection ,interconnection etc complete as required. 1 each 44500 44500

368 NS Video System

369 NS Projector : Supply, Installation, Testing and Commissioning of Projector Laser phosphor, 1920X1200 native resolution, min. 85,00 lumens, Contrast Ratio : 50,00,000: 1, Illumination life 20000 hours, Motorized horizontal and vertical lens offset , Inputs: 3G-SDI x 1 (BNC), HDMI x 1(HDCP2.2), DVI-D x 1, ,HD base T , Controls: RS-232C(D-Sub 9 pin),Remote (Stereo mini), Ethernet (10/100), USB Type A x2 (Min. 1 should be able to supply 5V/2A power), Point Correction, Lens position memory, should be complete with lens as per site and compact & light weight(weight less than 24.7 kg)., should be complete with lens as per site. The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. Make- Panasonic/Sony/ 1 each 1585000 1585000

370 NS SITC of Low Noise Motorized Projector ceiling Lift (40Kg load bearing capacity, Travel distance 6mtrs) The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. 1 each 182000 182000

371 NS Projector Screen: Supply, installation, testing & Commissioning of 300 inch Diagonal Projector Screen with 16:1 Aspect Ratio The bid must be submitted along with Manufacturer / OEM Authorization & OEM step-by-step compliance against technical specifications. 1 each 227000 227000

372 NS SITC of 65” 4K LCD Display (Backlight: Direct-lit LED) with mount- For Stage Monitor Display - Screen Size: 65”; Native Resolution: 4K UHD 3840 x 2160 (16:9); Brightness (Typ., cd/m²): 400 nits (cd/m2) typical; Aspect Ratio: 16:9, Contrast Ratio: 4000:1 typical; Viewing Angle (CR 10:1): 178° h/v, Audio Input: RCA (L/R) line in; Response Time: 8ms Typical; Display orientation: Landscape; Pixel pitch: 0.372 x 0.372mm; Life Time (Min.): 50,000 hours to 50% brightness; Control inputs: RS-232 (D-Sub9), LAN (RJ45), IR wire extender. Make: Samsung / Sony /LG/Panasonic 2 each 148500 297000

373 NS SITC of Active wall plate connectivity /floor plate for wired connectivity 1x HDMI & 1x USB C input with HDBT Receiver - HDMI, USB-C Input, 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling support Autoselect mode, CEC, EDID compatibility Extends HDMI, and Control over a single CATx cable up to 100 m distance, Input ports 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling HDBaseT compatible HDMI, HDCP, CEC compliant USB-C Shall support AV Alternate mode USB-C Shall be compatable with VGA Adaptors Receiver HDMI Reciver with HDBaseT input and 1 x HDMI Output Control over one CATx cable for upto 100m. 6 each 8850 53100

374 SITC of Blu ray DVD Player - Blu ray DVD Player Laser: Semiconductor laser Resolution: 1080P Output: HDMI Input: USB Playback: AAC, Audio CD, CD Text, DVD+R, DVD+R Double Layer, DVD+RW, DVD-R, DVD-R Dual Layer, DVD-RW, DVD Camcorder 8 cm DVD, DVD Text, DVD Video, HD JPEG, JPEG, KODAK Picture CD, LPCM, MP3, MPEG1, MPEG4, Super VCD, VCD, WMA, Xvid. Colour System: PAL / NTSC. 1 each 18500 18500

375 SITC of 8x8 HDMI Matrix Switcher with Audio De-embedder - Bandwidth - 18 Gbps or better HDCP, EDID Compliant 4K/UHD capability @60Hz with 4:4:4, 4:2:0 Chroma subsampling Should support HDR, Dolby Vision @ 60 Hz CEC display control Built-in HDMI audio de-embedding Color Depth: 8bit, 10bit Bit Rate: upto 24-bit Multi channl audio compliant TCP/IP, RS232 & IR Control Certifictaion: CE, FCC 1 each 198500 198500

376 NS SITC of Transmitter and Receiver with scaler 4k capable with HDMI Input and Twisted Pair Output - HDMI Tx & Rx extension module supporting 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling Control over one CATx cable for upto 70m HDCP , EDID compliant Input Port: Tx - 1 x HDMI, Rx - 1 x HDBaseT Output Port: Tx - 1 x HDBaseT, Rx - 1 x HDMI 4K/UHD capability @ 60 Hz with 4:2:0 chroma subsampling HDBaseT compatible HDMI, HDCP, CEC, EDID compliant Distance upto 70m PoE Compatible Support RS-232, IR, and CEC control signals over HDBaseT. 1 each 65000 65000

377 NS Various Data Cables & Connectors : Supply, Installtion, Testing & Commissioing of all required HDMI Cables & Connectors and additional accessories. 1 Lot 250000 250000

AUDIO & VIDEO (PART 'C') 8,898,845.00

LAN/WIFI SYSTEM /CCTV

378 DSR 40.4 Supplying Installation Testing and Commissioning of 4MP IP IR Outdoor Bullet Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. 3) Compression (Minimum): Video:- H.265 or better, Audio:- G.711U/A, G.711Mu, G.726, AAC, G.723. Make - Prama Hikvision/CP Plus/Prama 8 Nos 10063 80504

379 DSR 40.3.1 Supplying Installation Testing and Commissioning of 4MP IP IR Dome Camera having following specifications and features etc :- 1) Signal System: PAL/NTSC, Signal to Noise Ratio: > 50 dB,Camera should display Camera title, Date & Time in live & recorded video 2)Image Sensor: 1/2.8" or better progressive Scan CMOS to get color image even at night condition(Minimum Illumination: 0.006 Lux@ F1.4, AGC ON, 0 lux with IR or better) True Day & Night High Performance Mechanical IR cut filter with auto switch, Integrated IR Source (Auto, Manual)- Inbuilt IR LED's with effective distance upto 50 meter or better and 30 meter for colour view in night, Imaging: 1/3s to 1/30000s electronic shutter support, Auto Gain Control , White Balance- Auto, Back Light Compensation, Multi zone Privacy Masking, HLC, Digital Watermarking. Make - Prama Hikvision/CP Plus/Prama 8 Nos 10365 82920

380 DSR 40.9.3 SITC of 2MP IP IR motorized PTZ @25/30fps or better camera, Triple streaming , configurable on resolution:- Main stream: 5MP@25/30 fps Sub streams:1080p@25/30 fps, varifocal lens 3.95mm (±5mm) ~ 177.75mm (±5mm) or better with Automatic & manual Focus Adjustment provisions, 45x Optical zoom and 16x Digital zoom with angle of view H: 65.7°–1.9°V: 39.4°–1.1°D: 73.1°–2.1, PAN Travel: Pan: 0° ~ 360° endless,Manual Pan: 260° /s, Preset : 300° /s, Tilt Travel: Tilt: -20° ~ 90°, auto flip 180°, Manual Tilt: 120° /s, Preset : 200° /s. Make - Hikvision/CP Plus/Prama 1 Nos 107974 107974

381 DSR 11.2 Supplying Installation Testing and Commissioning of 64 Channel Network Video Recorder (NVR) with camera licenses to record for all channels having specifications and features etc as mentioned below : 1) Network Video Recorder Embedded/ Installed OS (Linux) along with Camera Licenses to record per NVR and to provide a live view, storage and simultaneously Multi-channel playback of all IP camera or more and must be ONVIF with minimum support of 384 Mbps incoming Bandwidth. 2) NVR should support video compressions : H.265 or better, H.264, MJPEG. 3) Must support 1 channel RCA Input, 2 channel RCA Output for Two-way Talk with G.711U/A, G.711u, PCM, G726 audio compressions. 4) Intelligent auto power on when power resumes after power outage. 5) Storage: It should support minimum 8 SATA Slots with 20TB capacity/ Slot and RAID support of RAID 0/1/5/6/10. Make - Prama Hikvision/CP Plus/Prama 1 Nos 82600 82600

382 DSR 40.12.3 SITC of 8 TB Enterprise-Grade / RAID-Optimized Surveillance HDDs. Type & Drive Mechanicals: 3.5-inch form factor, SATA III (6 Gb/s) interface, running at a minimum speed of 7200 RPM with a cache size of 256MB or higher.RAID Optimization & Vibration Control: Must be equipped with embedded Rotational Vibration (RV) Sensors to maintain performance inside an 8-bay high-density chassis environment.Recording Technology: Must strictly use Conventional Magnetic Recording (CMR) technology. Shingled Magnetic Recording (SMR) drives are strictly prohibited due to severe RAID failure and write-speed drops during continuous loops.Workload & Reliability Metrics: Engineered for 24x7 continuous video write cycles with a minimum Mean Time Between Failures (MTBF) rating of 1.5 Million Hours and a workload rating of at least 180 TB/Year.Streaming Optimization: Firmware must feature dedicated ATA streaming optimization (such as AllFrame AI or ImagePerfect AI) to support parallel video streams without dropping frames. Make - Seagate/WD/Toshiba 2 Nos 20119 40238

383 DSR 39.17.1 SITC of High-Performance Cat6 UTP Sub-System Cable (Solid Copper) 1. Regulatory, Standards, & Material ComplianceInternational Standards: Must fully comply with and exceed ANSI/TIA-568.2-D Category 6, ISO/IEC 11801 Class E, and EN 50173 standards.Conductor Composition: Conductor must be made of 100% Solid Bare Electrolytic Grade Copper. Copper-Clad Aluminum (CCA) or Copper-Clad Steel (CCS) variants are strictly rejected.Conductor Gauge: Minimum wire gauge size must be 23 AWG to guarantee structural data integrity and optimized power delivery over distance.Flammability & Safety Rating: Outer jacket layer must be Fr-PVC (Flame Retardant) / LSZH (Low Smoke Zero Halogen) compliant, meeting IEC 60332-1 flame propagation standards for high-occupancy government buildings.2. Electrical & Transmission ParametersBandwidth Capacity: Tested and certified to support a clean continuous frequency spectrum of up to 250 MHz (with extended support up to 500 MHz preferred).Insulation Material: High-Density Polyethylene (HDPE) coating over each individual core conductor wire.Outer Diameter Size: Approved Structural Brands (Indicative Only)Honeywell Performance Series / CommScope / Legrand/ Belden. 1250 Mtrs 60 75000

384 DSR 39.11 SITC of 24-Port Category 6 UTP Unshielded 1U Rack-Mount Patch Panel 1. Standards & MaterialsCompliance: ANSI/TIA-568.2-D Cat6, ISO/IEC 11801, RoHS, and UL Listed (UL 94V-0).Chassis: 1U height, 19-inch rack-mountable Cold-Rolled Steel (SPCC) body.Rear Management: Includes a detachable metal cable management bar for strain relief.2. Interfaces & PerformancePort Density: 24 Unshielded RJ45 ports with sequential front/rear numbering.Front Contacts: Phosphor bronze with 50 micro-inches gold plating ($\geq$750 insertions).Rear IDC: 110/Dual IDC blocks supporting 22-24 AWG solid wires ($\geq$200 terminations).Wiring: Supports color-coded T568A and T568B schematics.3. Electrical & PowerPoE Support: Compatible with IEEE 802.3af/at/bt (PoE++ up to 90W).Insulation Resistance: \(\geq 500\ \text{M}\Omega\) @ 500V DC.Contact Resistance: \(\leq 20\ \text{m}\Omega\).4. LabelingIdentification: Integrated write-on labeling strips with clear plastic covers. Make - CommScope / Legrand/ Belden 2 Nos 5278 10556

385 DSR 39.23.1 SITC of 6 U Single-Section Wall-Mount Networking Rack 1. Standards & ConstructionCompliance: DIN 41494, EIA-310-D, and ISO 9001/14001/45001 [EIA/ISO/EN/CEA industrial standards].Material: Heavy-duty welded steel with a 7-tank anti-corrosion powder-coated finish.Load Capacity: Minimum certified static load limit of 50 kg.2. Physical DimensionsHeight: 12U (approx. 613 mm cabinet profile).Width: 550 mm with a standard 19-inch usable equipment mounting grid.Depth: 500 mm depth profile.Angles: 2 x adjustable 19-inch mounting rails with square cage-nut slots.3. Doors & Thermal DesignFront Door: Lockable, swing-frame Toughened Glass Door with key lock.Side Panels: Solid, welded steel side structures for security.Cooling: Vented top panel with cutouts for 1 or 2 Exhaust Cooling Fans.Cable Entry: Top and bottom knockout slots for structured cable routing.Grounding: Integrated electrical grounding/earthing points. Make - CommScope / Legrand/ Netrack 3 Nos 6939 20817

386 DSR 39.3.1 SITC of 24 port PoE Layer 2 Network Switch with PoE Support of 370W or higher with each cooper port supporting 802.3at PoE+ min. Physical Interfaces & Ports 24 Base Ports: 24 × 10/100/1000 Mbps (Gigabit Ethernet) RJ45 copper ports with automated PoE deployment capability. Uplink Ports: 2 to 4 dedicated Gigabit SFP or 10G SFP+ fiber slots for long-distance high-speed backhaul routing. ⚡ Power Specifications PoE Standards: Supports IEEE 802.3af (PoE up to 15.4W per port) and IEEE 802.3at (PoE+ up to 30W per port). Mega models feature 802.3bt (PoE++ up to 60W). PoE Budget: Varies between 195W to 400W total available power across popular enterprise-tier systems. Make - Juniper/Cisco/TPlink/Alcatel 2 Nos 125393 250786

387 DSR 42.4.2 SITC of 43 inch 4 K LED Display (For Each Tower & Common Facility Centre) Screen & Picture Resolution: 4K Ultra HD (3840 × 2160 pixels) Refresh Rate: 60 Hz Formats: Dolby Vision, HDR10+, and HDR10 Tech: 4K Studio Color Engine & Hexa Chroma Drive Audio & Sound Output: 20W to 30W built-in stereo speakers Decoders: Dolby Atmos and DTS Studio Sound Bluetooth: Two-way audio linking capability Smart System OS: Google TV with individual user profiles Voice: Google Assistant remote control Casting: Built-in Chromecast and AirScreen Gaming: Auto Low Latency Mode (ALLM) Inputs & Ports HDMI: 3 × HDMI ports (1 × HDMI 2.1 eARC) USB: 2 × USB media playback ports Internet: Dual-band Wi-Fi (2.4/5GHz) and RJ45 LAN Output: 1 × Digital Optical Audio Out. Make - Samsung/Panasonic/Sony/LG 1 Nos 51459 51459

388 DSR 42.2 SITC of High End Server PC Processor & Logic Cores CPU Model: 14th Generation Intel Core i5-14700 / i5-14700K (Raptor Lake Refresh architecture). Physical Cores: 20 Cores total (Split into 8 high-frequency Performance Cores + 12 background-handling Efficient Cores).Logical Processors (Threads): 28 Parallel Threads (The 8 P-cores feature hyperthreading, generating a highly scalable computation engine). Clock Dynamics: Base speed of 3.4 GHz boosting aggressively up to 5.6 GHz Max Turbo frequency backed by a massive 33 MB Intel Smart Cache bank. Make - Lenovo/HP/Dell 1 Nos 90698 90698

389 NS SITC of An enterprise-tier Integrated Video Management Software (iVMS) architecture designed to manage 1,000 IP Cameras simultaneously must utilize a distributed, high-availability server environment. System Architecture & Scalability Central Management System (CMS): Supports a Distributed Server Architecture with a centralized management node and multiple Recording Servers (Failover nodes). Failover Resilience: N+1 or N+M Redundancy mechanism ensuring that if a recording server crashes, a standby server automatically assumes the 1,000-camera recording pipeline within 30 seconds without data loss. Licensing Model: Base software platform license supporting modular expansion up to 10,000+ channels, with individual per-camera connection licenses. Video Stream Management Codec Compatibility: Native decoding for H.265+, H.265, H.264, and MJPEG video stream compression formats. Dual-Streaming Optimization: Main Stream: High-resolution (4K/5MP/1080P) dedicated directly to storage arrays. Sub-Stream: Low-resolution (D1/CIF) adapted for multi-screen client live-monitoring views to optimize network bandwidth. Bandwidth Control: Dynamic Stream Selection Make - As CCTV OEM 1 Nos 34500 34500

390 SOR 1.58.1 Supplying and drawing of UTP 4 pair CAT-6 LAN cable in the existing surface/recessed steel /PVC concuitas required. Make - Dlink/Legrand/Molex 1250 MTR 52 65000

391 NS SITC OF PVC Conduit 25 mm isi mark 950 MTR 42 39900

392 DSR 39.12.1 SITC of Category 6 UTP Patch Cords - 1 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact. Dlink/Legrand/Molex 24 EACH 151 3624

393 DSR 39.12.2 SITC of Category 6 UTP Patch Cords - 2 Mtr Standard Colour - Blue, Grey, Yellow, RJ45 Plug - Polycarbonate plug, Current Rating - 1.5A max, Insulation Resistance - 500MΩ/km(min)@500 Vdc, Contact Resistance - 15 mΩ (max) per contact. Dlink/Legrand/Molex 24 EACH 227 5448

394 AR SITC of 24-port GbE Smart Managed Switch with GbE Uplink Interfaces-24 Ports 10/100/1000Mbps+4 SFP;Port Standards & Functions-IEEE 802.3 10BASE-T Ethernet (twisted-pair copper),IEEE 802.3u 100BASE-TX Fast Ethernet (twisted-pair copper),IEEE 802.3ab 1000BASE-T Gigabit Ethernet (twisted- pair copper),IEEE 802.3az compliance Auto-negotiation,IEEE 802.3x Flow Control; Full/Half Duplex-Full/half duplex for 10/100 Mbps speeds,Full duplex for Gigabit speed;Media Interface Exchange Auto MDI/MDIX adjustment for all twisted-pair ports;Switching Capacity 56 Gbps; Transmission Method Store-and-forward; MAC Address Table 16,000 entries per device, Maximum 64 bytes packet forwarding rate 41.7 Mpps,Packet Buffer Memory 1.5 MB,Maximum Power Consumption 22.45 watts, Standby Power Consumption 17.84 W/240 V,Diagnostic LEDs Link/Activity/Speed (Per 10/100/1000 Mbps port), Certifications CE (LVD) BSMICCC, C-Tick. Netgear / D-link/ Cisco. 1 EACH 29500 29500

395 AR SITC of Category 6, UTP 24-Port Patch Panel Size - 482.6mm x 44.2 (19’’ x 1U), Panel Material - Steel-fully powder coated, Unshielded - RJ 45, Plug Insertion Cycle - 750 times DC Resistance- 72Ω max, Voltage Rating - 72 Vdc max, Current Rating - 1.5A max. Dlink/Legrand/Molex 1 EACH 7500 7500

396 AR Supply fitting fixing Rack 19" 12U fully powder coated complete etc as required with complete accessories (5 amp x 6 socket, wire manager, rack fan) VALRACK/ Netrack make. 1 EACH 12300 12300

397 AR Supplying and fixing of RJ 45 computer socket suitable for Cat 6 on module GI box along with base & cover plate in surface or in recess including making connection, soldering etc. as required. Dlink/Legrand/Molex 24 Each 545 13080

398 AR SITC of Wireless N Access Point Wi-Fi 6 AX1800, up to 1.8 Gbps1 Dual-band, 2x2 MIMO, band-steering & airtime fairness Free-to-download Nuclias Connect software & app Flexible installation with PoE Customisable captive portal Make - TPlink/Cisco/Dlink 2 EACH 22600 45200

399 AR 16-Port Gigabit Smart Managed PoE Switch 16 x 10/100/1000BASE-T PoE ports 2 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface 193 W PoE budget. Make - TPlink/Cisco/Dlink 1 EACH 29800 29800

LAN/WIFI SYSTEM /CCTV (Part-D) Total amount 1,179,404.00

Part-(E) ONLINE UPS

400 DSR 26.2 Online UPS- Input supply: Three Phase, Output supply: Three Phase.

Supplying, installation, Testing & Commissioning of following capacity at full load (Unity Power Factor) at operating temperature 0 to 40 0C, Relative humidity 0 to 95%, Online double conversion true sine wave Uninterrupted hot swapable (allow for the replacement or addition of battery modules without shutting down the entire system) modular Power Supply (UPS) system with N+1 modules (N denotes total number of modules required for rated capacity). The UPS shall include a Rectifier, inverter, battery bank suitable for 30 minutes back up (Battery VAH capacity shall not be less than 1600 VAH per KVA of UPS rating per Hour backup time) on full load (Battery shall be VRLA, SMF in ABS Container) and Static Bypass switch along with provision for manual bypass, suitable isolation transformer for additional protection against neutral faults etc. UPS shall have inbuilt phase sequence correction. The UPS systems offered are to be of the latest technology with Digital Control Microprocessor based for

reliable operation using Insulated Gate Bipolar Transistor (IGBT)'s both for the rectifier & inverter (3 Level) with PWM (Pulse Width Modulation). The quality of design, manufacturing and inspection process should confirm to the relevant Inter-national standards such as IEC/EN/VDE. The operating efficiency of the UPS systems shall be >96% while operating on battery mode and delivering quality power to the 100% non-linear loads. Current total harmonic effect(ITHD) on the input grid shall be < 5% at 50 %load. (The required LC ( inductor (L) and a capacitor (C)) filters shall be included in UPS cost), extreme power factor kit to be included to limit the input power factor (PF) to 0.99 and output power factor shall be unity (i.e. kw rating of the UPS shall be kva rating x 1 ), however UPS shall be suitable to take load at 0.7 laging to 0.7 leading power factor loads. UPS shall be suitable for incoming supply AC : 3Phase 400V +/-20%, 50 Hz +/-5 Hz, AC Output voltage: 3Phase 415 Volt, 50 Hz +/- 0.2Hz, Overload capacity of 120% for 10 mins, Sine wave output. Non condensing, noise level less than 60db at 1 meter distance, protections: Input Under voltage over voltage, abnormal out voltage, battery over charging, output over current, short circuit protection, battery deep discharge protection, 10KV surge. UPS must comply with low voltage electromagnetic compatibility (EMC) achieved as per EN 6204, EN6204 Part I and Part 2, it shall be a Voltage and Frequency Independent (VFI)-type UPS. . Communication RS232/RS485/SNMP port open protocol for BMS integration, all hardware & software for iOT Communication as per approved by Engineering in charge. Required battery racks and interconnecting copper conductor cables of suitable size and connectors and all required accessories are inclusive of the cost). This system must provide a means for logging and alarming of all monitored points plus email notification. Forced air-cooling with integral inbuilt fans with redundancy (if one fan fail UPS should be able to handle at least 80% of the load, Noise Level 65 DB at 1 meter distance. The system shall be in compliance IEC 62040- 1,2 & 3, IS: 16242 and CPWD Specification. Display Panel (minimum) (In-build 5 inch or more LC Display / LED) to display : a) Input: Voltage, current, Frequency. b) Bypass: Voltage, Frequency. c) Output: Voltage, frequency, Current. d) Battery:

Voltage, Capacity. e) Load: KVA, KW, Percentage. f) Temperature: STS, Inverter, PFC. g) Event Logging & Statistical Data (On LCD/LED): UPS should capture and display up to 3000 events like: Over temperature / DC Bus Fail / Fan Fail / Fuse Fail / Overload / Short-circuit / Device Fail / Inverter Fail / Rectifier Fail / Bypass Fail, etc. h) Statistical Data: No. of power failures / Transfers to Bypass / Total Running time, etc. i) Mains Mode of Operation /Battery Mode of Operation / Bypass feeding the load / UPS Fault /Battery charging and discharging, overload, battery voltage and battery capacity. j) Audible Alarms : Mains Failure, Battery Low Alarm, UPS Overload, Fault, Shutdown, Input Over, Under Voltage, Output Over, Under Voltage, Battery Over, Under Voltage, Over Load and short circuit, Over Temperature. The UPS should have QR code which should contain drawing, test report OEM manual, Geo- Tag of manufacturing location etc

26.2.3 30KVA (Each Power module shall be < 10 KVA) 1 No 505748.00 505,748.00

ONLINE UPS(Part-E ) 505748.00

PART (F) SOLAR SYSTEM

401 DSR 17.1 Solar Photovoltaic Power Plant 17.1 Supplying Installation, Testing and Commissioning of on-grid Solar Photovoltaic Power Plant conforming to various applicable standards BIS, IEC, MNRE guidelines, the Central Electricity Authority Regulations and CPWD Specifications as amended up to date, consisting of Mono/Poly Crystalline silicon solar cells module, net metering facility, necessary control, protections, earthing, cabling, mounting structure, junction boxes, power conditioning units, Real time online web interfaced Data Monitoring System, Distribution panels, grid connecting arrangement, conduits, pipes, cable trays and other accessories etc. as required. a) High Energy Efficiency Solar Photovoltaic Module of capacity 330 Wp or above, manufactured in India, conforming to IS 14286/IEC 61215, IS/IEC 61730- Part-1, IS/IEC 61730-Part-2. Solar Photovoltaic Module conversion efficiency shall not be less than 23% at STC with temperature coefficient of Pmax better than -0.30% per 0C. PV modules used in solar power plants/ systems must be warranted for their output peak watt capacity, which should not be less than 90% at the end of 10 years and 80% at the end of 25 years. Solar Modules shall be designed to operate in relative humidity upto 100% with temperature between -10 0C and +85 0C. Further, each PV module used in any solar power project must have Radio frequency identification tag with information such as name of manufacturer, month and year of manufacturing, country of origin (separately for Solar cell and module), I-V curve, Unique Serial No and Model No of the module, Wattage, Im, Vm and FF, name of test lab issuing IEC certificate.

b)Power Conditioning Unit (PCU) of 350-800 V DC Input voltage range and 415 V AC, three phase, 4 wire, 50Hz +/- 2.5 Hz, output voltage suitable to generate AC with a variation of 10% at nominal voltage. Power with efficiency not less than 97%, total harmonic distortion less than 3% and suitable for ambient temperature from 0 to 50 0C, Minimum IP-65 for outdoor and Minimum IP 21 for indoor, Built-in

meter and data logger, MPPT, switching devices IGBT/MOSFETs and controller Microprocessor /DSP. PCU/inverter shall be capable of complete automatic operation including wake-up, synchronization & shutdown. The PCU shall be able to withstand unbalanced load conforming to IEC standard with shutdown/standby mode. It must be provided with grid islanding along with manual disconnect pole isolation switch besides automatic disconnection. Minimum protections: Mains Under / Over Voltage, Over current, Over/Under grid frequency, Over temperature, Surge voltage induced at output due to external source, Short-circuit, Lightening, Anti Islanding (for grid synch. Mode) and other protections as per applicable standards. LCD/LED display of minimum parameters: DC input voltage, DC current, AC Voltage and current (all 3 phases, in case of 3 phase), Instantaneous & cumulative AC output power, Daily DC energy produced and other parameters applicable standard. Communication interface RS 485 / RS 232.

c) Module mounting structure: The roof top solar plant generation units shall be installed by using supporting Aluminium/Galvanized MS structure (mass of zinc coating shall be as per IS4759 ) having minimum head room clearance of 2.4 meter above the terrace level / ground level. The mounting structure would be designed to sustain wind load and seismic parameter of the site of installation. All the structure shall be design as per applicable BIS code and the material shall also confirm the applicable BIS Code. Structural material shall be corrosion resistant and electrolytically compatible with the materials used in the module frame, its fasteners, nuts and bolts. The suitable arrangements for maintenance and cleaning shall be provided.

d) Real time online web interfaced Data Monitoring System complete with accessories for various parameters such as Solar Irradiance, temperature, AC Output Voltage and current, Output Power, Power factor, DC Input Voltage and Current, Time Active, Time disabled, Time Idle, Power produced and other parameters as per standard practices.

e) Array junction box & Main junction box with IP 65 protection and termination arrangement for incoming and outgoing cable along with glands, lugs and other

accessories etc. as required. Each junction box shall be made of GRP/FRP/Powder Coated Aluminium /cast aluminium alloy with full dust, water & vermin proof arrangement with High quality Suitable capacity Metal Oxide Varistors(MOVs) (semiconductor diode with resistant applied voltage)/ surge arrestors and suitable Reverse Blocking Diodes, isolation switches isolate the DC input to Inverter, copper bus bar etc.

f) Lightning, surge voltage protection, earthing protection and grid islanding.

g) Cables: Connections & Interconnections by required size IR/UV protected XLPE insulated copper conductor 1.1 kV grade armored power and control cables(ISI Marked) along with supplying & fixing of necessary channel/conduit, GI cable trays, supports, lugs, thimble and other accessories etc. as required.

h) DC Distribution Board And AC Distribution Panel Board: IP65, free standing, metal cladded, having copper bus bar, having required protection and control gears, connection-interconnection, etc. as required. kWp 54280.00 60 KWP 54280.00 3,256,800.00

TOTAL (F) 3256800.00

PART (G) FIRE SUPPPRESSION SYSTEM

403 NS SITC lienear pneumatic heat Detection. 20 Mtr 3684.00 73,680.00

404 NS SITC of Master control unit for controlling each system, complete with pressure switches, buzzers and electronic hooter, including all necessary accessories + electrical wiring to make entire system functional (Make :- Fireterx/tracefire/Safefire). 1 No 27289.00 27,289.00

405 NS Rubber mat of 16 mm thik and 1000mm wide to with stand 15kv dielectric strength as per is 5424.1969 15 Metre 2208.00 33,120.00

406 NS Shock treatment chart in English and local language duly framed with glass. 4 nos 696.00 2,784.00

407 NS First aid box complete with all standard first aid materials. 2 nos 602.00 1,204.00

408 NS Rubber gloves 11 KV grade as per IS 4770-68 2 pairs 401.00 802.00

3.4 Earthing with G.I. plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with salt and charcoal / coke as required. 2 Set 6884.00 13,768.00

410 3.11 Supplying and laying 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode, including connection with G.I. nut, bolt, spring, washer excavation and refilling etc. as required. 10 Meter 721.00 7,210.00

411 3.15 Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required. 10 Meter 195.00 1,950.00

FIRE SUPPPRESSION SYSTEM Rs. 311,894.00

Part -(H) Service Block

412 1.3 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Batten Holder Point 22

Tube Light Point 33

Ceiling Fan Point 12

Exhaust Fan Point 7

45 watt LED Street light 6

413 1.5 Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. 150 Meter 309.00 46,350.00

414 1.31 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 8 Each 414.00 3,312.00

415 1.32 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 10 Each 531.00 5,310.00

416 1.7 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.

1.7.1 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 200 Meter 201.00 40,200.00

1.7.2 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 30 Meter 246.00 7,380.00

1.7.11 4 X 6 sq. mm + 1 X 6 sq. mm earth wire 20 Meter 660.00 13,200.00

1.7.12 4 X 10 sq. mm + 1 X 6 sq. mm earth wire 25 Meter 925.00 23,125.00

417 1.25 Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate/ switch box including connections but excluding modular plate etc. as required. 12 Each 358.00 4,296.00

418 1.33 Supplying and fixing 2 pin, 5/6 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 46 Each 64.00 2,944.00

419 1.34 Supplying and fixing batten/ angle holder including connection etc. as required. 22 Each 80.00 1,760.00

420 2.9 Supplying and fixing following way, horizontal type three pole & neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus - bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)

2.9.1 4 way ( 4 + 12 ), Double door, horizontal type 1 Each 4,184.00 4,184.00

2.9.2 6 way ( 4 + 18 ), Double door, horizontal type 1 Each 5,132.00 5,132.00

421 2.12 Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive loads of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.

2.12.1 6 A to 32 A, Single pole 30 Each 237.00 7,110.00

2.12.8 40 A to 63 A, TP&N ( for 2 Nos DB & 2 Nos Panel) 4 Each 2,329.00 9,316.00

422 5.1 Supplying and fixing 4'X18 watt LED batten with minimum efficacy 100 lm/w in polycarbonate housing and complete with integrated electronic driver etc directly on wall/ ceiling including connections with 1.5 sq.mm FRLS PVC insulated copper conductor etc. as required. 33 Each 521.00 17,193.00

423 5.14 Supplying and fixing following types LED street light with minimum efficacy 100 lm/w in die cast aluminium housing, toughened glass, IP 66 protection and complete with electronic driver etc on pole/building including connection earthing the body etc as required.

424 8.5 Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV/ HPSV/ LED street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. 3 Each 1,038.00 3,114.00

425 1.57 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 4 nos. 5 pin 5/6 amps modular socket outlet and 4 nos. 5/6 amps modular switch, connection etc. as required. 2 Each 1,064.00 2,128.00

426 6.1 Supplying and fixing of following types lamp in the existing electrical fitting/ fixtures etc. as required.

6.1.6 15 watt LED lamp 22 Each 250.00 5,500.00

427 8.15 Supply and installation of regular/standard model A.C. ceiling fan of 1200 mm sweep with service value (CM/MM) minimum 4.00, Air delivery minimum 210 cum/min including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated copper conductor etc as required. 12 Each 2,482.00 29,784.00

428 8.17 Supply and installation of following sweep/ sizes metallic blade, heavy duty, single phase, 230 V A.C. Exhaust Fan in existing opening including making good the damage, connection, testing and commissioning etc as required.

429 8.11 Supply and fixing of fabricated Electrical control panel of cubical construction, floor/wall mounted type, fabricated out of 16 SWG CRCA sheet, compartmentalised with hinged doors, dust and vermin proof, powder coated painting of approved shade after 7 tank treatment process, cable alley, internal wiring, earth terminals, Bus bar Chamber, insulator and complete in all respect etc and panel manufactures must be approved by CPRI. (But without RYB inicator, ammeter, voltmeter, inter-connection copper conductor cable/solid copper strip, switchgears etc.) 12 Sq.ft 1,809.00 21,708.00

430 1830 50 mm X 5 mm copper strip (2.30 kg/mtr) 6 Kg 871.00 5,226.00

431 8.13 Supply and fixing panel mounted digital multimeter (Voltmeter & ammeter) including CT coil and RYB pilot indictor in the existing cubical panel board including drilling holes in the panel board making connections etc as required. 1 Each 6,536.00 6,536.00

432 2.4 Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections etc. as required.

433 2.7 Providing and fixing following capacity four pole ON-load/ panel mounted changeover switches inside the existing cubical panel board including drilling holes in cubicle panel, making connections etc. as required.

434 7.9 Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

435 7.7 Supply of following sizes and core PVC/XLPE insulated, PVC sheathed (heavy duty) armoured electrical power cable with aluminium conductor for working voltage upto 1.1 KV as required.

436 7.2 Laying of one number additional PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground in the same trench in one tier horizontal formation including excavation, sand cushioning, protective covering and refilling the trench etc. as required.

7.2.2 Above 35 sq. mm and upto 95 sq. mm 35 Meter 232.00 8,120.00

437 3.6 Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonary enclosure with cover plate having locking arrangement and watering pipe 2.7 metre long etc. with charcoal/ coke and salt as required. 1 Set 13,721.00 13,721.00

438 3.17 Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing etc. as required. 15 Meter 144.00 2,160.00

Part -'H' Service Block Total Rs 486,259.00

PART - 'I' LIGHTING AUTOMATION INCLUDING OCCUPANCY SENSOR

439 DSR 7.2 Supplying, Installation, Testing and commissioning of Passive Infrared(PIR) technology based occupancy sensor with day light dimming(lighting level shall be regulated as per availability of natural day light in an area along with occupancy detection.) having high performance, regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 mtr and for 5 m diameter coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. 2 Nos 9670 19,340.00

440 DSR 7.3 Supplying, Installation, Testing and commissioning of Microwave technology based occupancy sensor having high performance, non regulating programmable type, suitable for connected load upto 10Amp , for mounting height up to 3 meter and for 5m X 20m coverage area along with necessary fixing arrangements i/c programming at site etc. complete as required. 50 Nos 12515 625,750.00

PART - 'I' LIGHTING AUTOMATION INCLUDING OCCUPANCY SENSOR TOTAL RS 645,090.00

PART'E' Rs. 505,748.00

PART'G' Rs. 311,894.00

PART'H' Rs. 486,259.00

PART'I' Rs. 645,090.00

TOTAL Rs. 63,052,521.00

Civil work +Electric work Net Total 227,141,394

Executive Engineer, Building Division, Madhubani