Repairing and Maintenance Work of Various Municipal Suman School Buildings and NPSS school Building at T.P.S. No. 39,( Limbayat - Udhana ), T.P.S No.40 ( Limbayat - Dindoli ) ,T.P.S. no 19 ( Magob ) in South East Zone (Limbayat), Surat.

Name Of Work :- Repairing and Maintenance Work of Various Municipal Suman School Buildings and NPSS school

Building at T.P.S. No. 39,( Limbayat - Udhana ), T.P.S No.40 ( Limbayat - Dindoli ) ,T.P.S. no 19 ( Magob ) in South East

Zone (Limbayat), Surat.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Demolition including stacking of serviceable

materials with all lead and lift. (i) RCC Work

Demolition of brick work and stone masonry including

2 2 18 stacking of serviceable materials and disposal of unserviceable 100.00 C.M. 550.40

materials with all lead and lift. (i) On Cement Mortar.

Removing and scraping of old deteriorated

plaster of any thickness from wall / RCC member including

stacking of serviceable material and disposal of unserviceable

from site of work with all lead and lift.

Dismentling steel work including distempering and stacking the

maerials with all lead and lift

Dismantling door, windows, ventilators etc.

(wood or steel) shutters including chowkhats architraces,

holdfasts and other attacement etc. complete and stacking them

within all lead and lift. (i) Not exceeding 3 Sq.M. in area.

Dismentling door, windows, ventilators etc. (wood or

steel)shutters including chowkhats architraces, holdfasts and

otherattacement etc. complete and stacking them within all lead

and lift. (i) Exceeding 3 Sq.M. in area.

Dismentaling of sheet roofing inlcuding ridges, Hips,

Valleys,Gutters etc. stacking of serviceable materials and

disposal of unserviceable materials with all lead and lift. (i) G.I.

8 12 18 Kota stone flooring and steps 10.00 S.M. 47.72

10 14 18 Tiles flooring / Dedo 10.00 S.M. 47.72

11 15 18 Granite flooring and steps 25.00 S.M. 47.72

Dismentling C.I. pipes G.S.W. pipes and A.C. rain water pipes

12 16 with fittings and clamps including stacking the materials with

all lead and lift. (for any dia, of pipe)

18 22 18 UPVC pipe 20.00 Rmt. 74.77

Dismentling wood work, wrought framed and fixed in frames

trusses including stacking the materials with all lead and lift.

Dismentling barbed wire in fencing including making rolls and

also including dismentling fencing posts including all earth

work concrete in base and making good the disturbed fround

stacking useful materials as directed and disposing as directed

and disposing of the unserviceable materials with all lead and

Dismantling sanitary fittings like wass basin, W.C. pan Indian

21 25 18 and European type, flushing tank etc. including stacking the 20.00 EACH 405.65

materials with all lead and lift.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto 50 mt.

Lead & all lift, watering etc. Comp. (A) Loose or Soft soil

Executed With Mechanised Efforts / Machinaries

Excavation for foundation includ.sorting out & stacking of

useful materials & disposing of the excavated stuff upto 50 mt.

Lead & all lift, watering etc.Comp. (A) Loose or Soft

soilExecuted With Manual Labours

Providing & Laying C.C1:5:10 (1cement :5coarse sand :10

25 3 1 graded stone agg. 40 m.m Nominal size )& curing comp. excl. 0.00 C.M 2517.44

cost of from work in :Foundation &Plinth

Providing & laying cement concrete 1:4:8 (1 cement:4 coarse

26 4 1 sand:8 graded stone agg. 40 mm nominal size) & curing comp. 10.00 C.M 2680.21

excl.cost of form work in (A) Foundation and Plinth

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

27 5 1 Crushed stone agg 20m.m Nominal size)&curing comp. excl. 10.00 C.M 3005.76

cost of form work in :(a) foundation & Plinth

Providing & laying cement concrete 1:1.5:3 (1 cement:1.5

sand:3 graded stone agg. 20 mm nominal size)& curing comp.

28 6 1 Includ.cost of form work but 5.00 C.M 4146.15

exclu. Cost of reinforcement for reinforced concrete work in :

(A) Foundation, footing, Base of columns and Mass concrete.

Providing & laying ordinary cement con.1:1.5:3

(1cement:1.5sand: 3 graded stone agg. 20 mm nominal size)

29 7 1 finishing smooth curing etc. comp. Incld. Cost of form work

but excl. Cost of reinforcement for R.C.C. Work in : Up to

G.L./P.L. (A) COLUMNS

(1)Having c/s area up to 0.08 s.mt 2.00 C.M 12,632.60

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 11,166.97

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 9201.68

(1)Having c/s area up to 0.08 s.mt 2.00 C.M 9,102.61

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 8174.41

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 7086.88

Providing & fixing IS Mark TMT Bar FE 500D reinforcement

30 8 1 for R.C.C. work incl. bending, binding & placing in position 150.00 KG 76.21

etc. comp. Upto G.L./P.L.

Brick work using common burnt clay building bricks having

crushing strength not less than 35 kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly

Filling available excavated earth (excluding rock) in trenches.

plinth, sides of foundations etc. in layers not exceeding 20 cm.

in depth consolidating each

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in

33 11 1 layers of 20cm. thickness including watering, ramming and 10.00 CM 289.06

consolidating etc. complete

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

20mm thick sand faced cement plaster on walls upto height

metres above ground level consisting of 12mm thick backing

coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing

coat of C.M. 1:1 (1-cement : 1-sand) etc. complete.

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone agg.

mm nominal size) finishing smooth curing etc. comp. Incl..

Cost of form work but excl. Cost of reinforcement for R.C.C.

(1)Having c/s area up to 0.08 s.mt- Ground Floor 3.00 CM 12632.60

First Floor 3.00 CM 12672.24

Second Floor 0.00 CM 12711.88

Terrace (third) Floor 0.00 CM 12,751.53

(2) c/s area more than 0.08sq. mt. & upto 0.12 sq.mt - G.F 0.00 CM 11166.97

First Floor 0.00 CM 11206.61

Second Floor 0.00 CM 11,246.25

Terrace (third) Floor 0.00 CM 11285.89

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 CM 9201.68

First Floor 0.00 CM 9241.32

2 Second Floor 0.00 CM 9280.96

Terrace (third) Floor 0.00 CM 9320.61

(1)Having c/s area up to 0.08s.mt- Ground Floor 2.00 CM 9102.61

First Floor 2.00 CM 9142.25

Second Floor 0.00 CM 9181.89

Terrace (third) Floor 0.00 CM 9221.53

(2) Having c/s area more than 0.08 s.m. & upto 0.12 s.m - G.F 0.00 CM 8174.41

First Floor 0.00 CM 8214.05

Second Floor 0.00 CM 8253.69

Terrace (third) Floor 0.00 CM 8293.33

(3) Having cross sectional area more than 0.12 sq. mt. -- G.F 0.00 CM 7086.88

First Floor 0.00 CM 7126.52

Second Floor 0.00 CM 7166.16

Terrace (third) Floor 0.00 CM 7205.81

(2) Slabs having more than 8cm. and upto 10 cm. Th'.-

First Floor 0.00 CM 8024.06

Second Floor 0.00 CM 8063.70

Terrace (third) Floor 0.00 CM 8103.34

(3) Slabs having more than 10 cm. & upto 13 cm. Th'.-

First Floor 0.00 CM 7436.60

Second Floor 0.00 CM 7476.24

Terrace (third) Floor 0.00 CM 7515.89

(4) Slabs having more than 13 cm. Thickness -- G.F 0.00 CM 6813.01

First Floor 0.00 CM 6852.65

Second Floor 0.00 CM 6892.29

Terrace (third) Floor 0.00 CM 6931.94

(D) LINTELS: -- G.F 5.00 CM 9531.24

First Floor 5.00 CM 9570.88

Second Floor 0.00 CM 9610.53

Terrace (third) Floor 0.00 CM 9650.17

(E) CHAJJAS: -- G.F 0.00 CM 5512.83

First Floor 0.00 CM 5552.47

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Second Floor 0.00 CM 5592.11

Terrace (third) Floor 0.00 CM 5631.76

Providing & laying ordinary cement

con.1:1.5:3(1cement:1.5sand:3 graded graded stone

agg. 20 mm nominal size) finishing smooth curing etc.

comp. Incl.. Cost of form work but excl. Cost of

reinforcement for R.C.C. Work in : (A) Stair cases

including landings etc.

Ground Floor 0.00 CM 7380.20

First Floor 0.00 CM 7419.85

Second Floor 0.00 CM 7459.49

Terrace (third) Floor 0.00 CM 7499.13

(B) Vertical and horizontal fins

Ground Floor 0.00 CM 10831.75

First Floor 0.00 CM 10871.40

Second Floor 0.00 CM 10911.04

Terrace (third) Floor 0.00 CM 10950.68

Providing & fixing IS Mark TMT Bar FE 500d

reinforcement for R.C.C. work

incl. bending, binding & placing in position etc.comp.---

First Floor 50.00 KG 77.21

Second Floor 50.00 KG 78.21

Terrace (third) Floor 0.00 KG 79.21

Brick work using common burnt clay building bricks

having crushing strengthnot less than 35 kg./Sq.Cm. in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(C) Fly Ash

Bricks Ground Floor

First Floor 0.00 CM 4786.95

Second Floor 0.00 CM 5061.92

Terrace (third) Floor 0.00 CM 5379.24

Half brick masonry in common brunt clay building bricks

having crushing strength not less than 35 Kg/Sq.Cm. in Cement

mortar 1:4 (1- Cement : 4 - coarse sand ) in foundation and

plinth (C)Fly Ash Bricks.

Ground Floor 20.00 SM 678.86

First Floor 10.00 SM 685.11

Second Floor 0.00 SM 691.37

Terrace (third) Floor 0.00 SM 697.62

Uncoursed rubble masonary with hard stone of approved

40 18 2 quality in foundations and plinth in cement mortar 1:6 (1 0.00 CM 2500.01

Cement : 6 sand) including leveling up etc. complete.

Pointing on Coursed stone masonary with cement mortar 1:3 (1

cement : 3 Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 SM 100.22

Pointing on Uncoursed stone masonary with cement mortar 1:3

(1 cement : 3 Sand) ---(A) Flush Pointing

(B) Ruled Pointing 0.00 SM 108.81

Providing Rubble Pitching with hard stone of approved quality

43 21 3 in cement mortar 1:6 (1 Cement : 6 Coarse sand) including 0.00 CM 2550.00

leveling up ,Curing etc. complete excluding pointing

Providing and filling rubbles including hand packing and

44 22 3 filling interstices with quarry spalls behind abutments and 0.00 CM 1064.80

between returns as directed.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing upto floor two level precast cementconcrete jali or

grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone

aggregate 6mm nominal size)

45 23 3 reinforced with 1.6 mm dia. Mild steel wire including 0.00 SM 706.60

roughening,cleaning, fixing and finishing in cement mortar 1:3

and curing complete. (B) 40mm thick.

First Floor 0.00 SM 716.63

Second Floor 0.00 SM 726.65

Terrace (third) Floor 0.00 SM 736.68

Providing & Applying 10mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces -- Ground Floor

First Floor 50.00 SM 217.93

Second Floor 0.00 SM 246.07

Terrace (third) Floor 0.00 SM 274.20

(B) For ceilings &soffits of stairs

Ground Floor 10.00 SM 214.60

First Floor 10.00 SM 242.74

Second Floor 0.00 SM 270.88

Terrace (third) Floor 0.00 SM 299.02

Providing & Applying 15mm.th.cement plaster in single coat

on brick/ concrete walls similar surfaces for plastering &

finished even & smooth with a floating coat of cement slurry

mixed with admixture of lime or neeru in required proportion

etc. comp. in C.M 1:3 (1 cement : 3sand) (A) For wall and

similar surfaces -- Ground Floor

20mm thick sand faced cement plaster on walls for height more

than 10 metres above ground level consisting of 12mm thick

48 26 3 backing coat of C.M. 1:3 50.00 SM 330.88

(1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1

(1-cement : 1- sand) etc. complete.

Providing 20 mm thick double coat mala cement plaster on

brick / concrete work for plastering comprising of base coat

mm thick cement plaster in

cement mortar (1 Cement : 4 coarse sand) in rough finishing

top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand)

finished with trovel

including scaffolding curing etc. complete.

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of 12 mm

av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) & 8 mm.

50 28 3 th. Finishing coat of C.M. 1:1 (1 cement: 1 sand) apply thick 0.00 SM 324

cement slurry and apply roller horizontal as well as vartical (

two times ) up to good quality and size of grain in elevation as

per directed by engineer incharge.

Providing throating or plaster drip and moulding it to R.C.C.

chajja etc. comp.. For all floor

Providing 20 mm deep finished groove in plaster in line and

level etc. Comp. For all Floor (M.R.)

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and laying precast terrazo tile 20mm thick

white,black, white and black (or of the colour specified in

specification of tender item) marble chips of sizes upto 6mm

laid in floors, treads of steps and landings on a bed of 25mm

50 31 3 average thickness of Lime mortar 1:1.5(1-Lime putty : 1.5 0.00 SM 629.91

coarse sand) or C.M. 1:6 (1:cement :6 - coarse sand) jointed

with neat cement slurry mixed with pigment to match the shade

of tiles including rubbing and polishing complete with precast

tiles of.(A) Light shades using white cement

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-

coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand)

laid over and jointed with grey

cement slurry mixed with pigment to match the shade of slab

including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in

risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with

gray cement slury mixed with

pigment to match the shade of slab including rubbing and

polishing etc.complete.

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson,Nitco,Somani ,Bell make at all floor levels, in

flooring, treads of steps & landings laid on a bed of 12 mm.

Av. Th.C.M.1:3(1cement :3 sand)

finished with flush pointing in white cement etc.com. For all

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson,Nitco,Somani,Bell make at all floor levels in

52 35 4 skirting risers of steps & dado on 10 mm. th. C.M.1:3(1cement 10.00 SM 887.64

:3 sand) including necessary cement paste for fixing and joined

with white cement slurry etc. complete. For all floors

Providing and laying Ceramic tiles 6mm thick in flooring treads

of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in

Providing and laying Ceramic tiles 6mm thick in skrting risers

53 37 4 of steps and dedo on 10mm thick cement plaster 1:3 (1-cement 10.00 SM 987.86

: 3-coarse sand) and jointed with white cement slurry

Providing & laying marble stone slab flooring over 20 mm.av.

base of C.M.1:6 ( 1 cement :6 coarse sand ) & jointed with grey

cement slurry incl. rubbing & polishing comp.(A) Marble slab

Providing & laying granite slab 18mm thick in flooring, treads

of steps and landing laid on bed of 20mm thick cement mortar

1:6 (1 Cement : 6 coarse sand) or lime mortar 1:1.5 laid and

finished with flush pointing in white or colour cement

including rubbing and polishing complete. ( Basic Rate:-

Providing & laying granite slab 18mm thick in skirting, risers

of steps, dedo and pillars laid on 10mm thick cement mortar 1:4

(1 Cement : 4 Coarse sand) and finished with flush pointing in

white or colour cement

including rubbing & polishing comp.. (Basic Rate:-

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & laying granite slab 18mm thick in Window-Door

seal Frame Etc laid on 10mm thick cement mortar 1:4 (1

Cement : 4 Coarse sand) with nessary adhesive material and

finished with flush pointing in white or colourcement,

including rubbing & polishing comp.. (Basic Rate:-

56 42 4 Labour Charges For Edge Finished For Granite 100.00 RM 43.43

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell, Asian or Euro make in

flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1

56 43 4 Cement : 6 Coarse sand) on new surface or fixing on existing 100.00 SM 1397.83

flooring by adhesive material including dismentaling of

existing flooring and jointed with colour cement slurry

including finished with flush pointing & cleaning the surface

etc. comp.Size 24" x 24" For Antiskid tiles

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x 24"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"

in flooring treads of steps and landing laid on a bed of 12mm

thick cement mortar 1:3 (1 cement : 3 coarse sand) finishing

with flush pointing in white cement.

Providing and laying Vitrified tiles 8 to 10 mm thick, 36" x 36"

in skrting risers of steps and dedo on 10mm thick cement

plaster 1:3 (1 cement : 3 coarse sand) and jointed with white

Providing and laying chequered precast concrete tiles 22mm

thick with aggregate of sizes upto 6mm in floors treads of steps

and landing on 20mm thick bed of C.M. 1:6 (1 cement :

sand) or L.M. 1:1.5 (1 Lime putty :

sand) jointed with neat cement slurry with pigments to match

the shade of the tiles.

Providing and laying rough chiseled dressed stone flooring over

20mm thick base of cement mortar 1:5 (1 cement : 5 coarse

62 49 5 sand) or L.M. 1:1.5 including pointing with cement mortar 1:2 20.00 SM 549.47

(1 cement : 2 stone dust) etc.

Providing and laying cement concrete flooring 1:2:4 (1 cement

63 50 5 : 2 course sand : 4 graded stone aggregate 20mm nominal size)

laid in one layer finished with a floating coat of neat cement

(A) 40mm thick 10.00 SM 303.84

(B) 50mm thick 10.00 SM 356.33

Providing & fixing 35mm.th. Flush Door Solid Double Core

type Both Face water proof Ply Vennered & 1.5 mm

th.laminate shall be pasted on both side with adhesives as

64 51 5 specified by the manufacturers. The laminate shall be as per 10.00 SM 3,720.00

approved shade & texture, of make incl. Sal wood frames of

finished size 12cm x 7cm.incl. S.S. Hinges with nessary screws

& Anodized aluminum fixtures & fastenings For all Floor.

65 52 5 Same as Above But Without Frame 20.00 SM 2520.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & fixing 35mm.th. Indian teak wood shutters for

doors, windows & clearstory windows incl. Indian teak wood

66 53 5 frames of finished size 12cm x 7cm.incl. anodized aluminum 20.00 SM 5533.68

fixtures & fastenings incl. Primer coat of approved quality &

two coats of oil painting etc. For all Floor (A) Fully Panelled

(B) Partly Panelled and Partely Galzed 0.00 SM 5185.03

(C) Fully Galzed 0.00 SM 4,551.69

Providing and fixing 35mm thick shutters for Doors, windows

and clearstory windows including anodised alluminium butt

hinges with necessary screws. (A) Indian teak wood. (i) Fully

Providing and fixing FRP FRAME size 125 x 65 mm and

mm thick FRP shutter with wood grain raised panneled design

finish shutter having extra reinforcement on sides & edges in

Gel coat finish. The core of the shutter & frame is to be filed up

with injected polyurethene foam done in situ along with

68 55 5 embedded wooden pieces for stiffening & also taking hinges & 50.00 SM 2019.98

fixtures. The whole FRP frame & shutter is to be water proof

weather proof,termite proof

&resistance to mild acid/alkali. Rates are to be inclusive of

S.S.hinges with fastener sleeve & alluminium fixtures &

Providing and fixing FRP of 35mm thick Fiber Glass shutter

with 1.5 to 2.0 mm thick fire retardent grade FRP skin in

depressed panel design having extra reinforcement on sides &

edges & in Gel coat finish. The core of the shutter is to be filled

up with injected retardent grade polyurethane foam done in situ

alongwith embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is to

be water proof ,weather proof, termite proof & resistance to

mild acid/alkali. Rates are to be inclusive of S.S hinges with

necessary screws & alluminium fixtures & fastenings.

Providing & fixing M.S.Grills of required pattern to wooden

frames of windows etc. At all floor levels with M.S. flats at

required spacing & frame around

square or round bars with round headed bolts & round headed

bolts and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain grill For all Floors

Providing & fixing in position collapsible steel shutters with

vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with bolts,

locking arrangements, stoppers, handles incl. applying a

priming coat of Redlead paint etc. comp.

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs curing,

layig including painting the exposed portion of loops, all as per

standard design complete.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C. work

incl. boxing, centering, vibrating, curing & mixed with

approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of the

water proofing material, concrete

work for top, bottom slab & side pardi for Under ground Tank

& Item incl. Necessary excavation & refilling the available

earth, 15 cm th' C.C 1:4:8 for bedding concrete, Half B.M. in

C.M. 1:4 outside wall, inside R.C.C. pardi as per design,

10mm.th. water proofing cement plaster in C.M. 1:3 with

finishing,watering etc.Comp.to all inner face & bottom of tank

comp. incl. Locking arrangement, outlet, inlet, overflow &

arrangement as necessary & C.I. Cover 0.60 x .045 weight not

less then 35kg.

etc. com. as per structural drawing excluding Steel & as

directed by Engineerin-

Underground tank 20000.00 lit 5.46

Providing and filling in depressions of Bath and W.C. At all

floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by Engineer in

charge etc. comp.

NOTE :- (1) The whole work is to be executed through

specialized agency with a guarantee of 10 (Ten) years given on

75 62 a prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as directed.

(A) Providing and laying water proofing treatment to vertical

and horizontal surfaces of depressed portions of W.C.,kitchen

and the like consisting of : (a) I course of applying cement

slurry @ 4.4 kg/sqm mixed with water

proofing compound conforming to IS : 2645 in recommended

proportions. (b) II course of a layer of plaster in C.M. 1:3 with

water proofing compound

confirming to IS:2645 about 25 mm. th' in the floor of the

6 depression & about 18mm th' On the side walls of the 50.00 SM 296

depression up to the floor level, water proofing plaster about

mm. th' be continued on the walls above the floor level for a

height of 600 mm. with surface suitable to receive further

treatment (c) Finishing top with stone aggregate 10mm to

12mm nominal size spreading

@0.008 C.M./S.M., thoroughly embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

(B) Providing and laying integral cement based water proofing

including preparation of surface as required for treatment of

roofs, balconies,

terraces etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using

cement admixed with proprietary water proofing compound

IS:2645 over the R.C.C. slab including cleaning the surface

before tratment.

(b) Laying cement concrete using broken bricks/brick bats

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse sand)

proprietary water proofing compound conforming to IS:2645

finally covered by jointless cement plaster 20mm th. in C.M.

special water proofing compound confirming to IS:2645 & top

smooth finished

with trowel with false chequered marking of 300 mm.size.The

carried along the vertical surface of the parapet & other

adjoining wall up to

height of about 300 mm in a shape of quarter round vata Incl.

Comp. With average thickness of 120 mm and minimum

thickness at khurra

as 65 mm.(c) The whole terrace so finished shall be flooded

with water for a minimum

period of two weeks for curing and for final test. All above

operations&tolaying

Proiding be water proofing treatment to vertical and

surfaces like consisting of (a) I course of applying cement

slurry 4.4 kg per

sq.mt. mixed with water proofing compound confirming to

rcommended proportions. (b) II corse of 20mm cement plaster

76 6 water proofing compound in recommended proportion (c) III 20.00 SM 505.00

applying blown or / resideal bitumen applied hot at 1.7 kg per

sqm of area. (d)

IV course of 400mm micron th. PVC sheet. (Overlaps at joints

should be 200mm wide and pasted to each other with bitumen

Providing & fixing G.I. Rain water spout of 50 mm.dia &

Providing & fixing at all floor levels,both face polished

machine cut edge

78 65 6 green kota stone slab (30mm) for urinal partition joined with 20.00 SM 900

slurry (1:1) incl. Rubbing & polishing etc. complete. (M.R.)

Providing & fixing at all floor levels,both face polished

machine cut edge

Marble slab for urinal partition joined with grey/White cement

incl. Rubbing & polishing etc. complete. (M.R.)( Basic Cost-

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

WATER SUPPLY AND SANITARY ITEMS

Prov.& Fixing water closet squatting pan (Indian type

W.C.pan) at all floor levels, size 580mm incl. 100 mm size

"P'or "S" trap for water closet squatting

pan joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long

pattern of approved colour For all Floor

Providing and fixing Wash Down Water closet European type

integral P or S trap including jointing the trap with soil pipe in

cement mortar 1:1 (1 cement : 1 find sand) (seat and cover to be

measured and paid for separately) (A) Viterous china pattern - I

(i) in approved colour

Providing and fixing plastic seat and cover for wash down

82 69 7 water closet with C.P. brass hinges and rubber buffers (B) 20.00 EACH 291.33

Plastic seat and cover.

Providing & fixing wash basin with single hole for pillar tap at

all floor levels, with C.I. or M.S. Brackets painted white incl.

cutting holes & making good the same incl. fittings such as

pillar tap, capstan head screw down high pressure with screws,

shanks & back nuts, C.P. Brass waste trap, screw down stop

tap 15 mm. dia. etc. complete. (A) Vitreous china flat back

mm.x 400 mm. size in approved colour For all Floor

Providing & fixing Urinal or approved quality including

conecting the Urinal with waste pipe, tap etc. complete. (A)

White earthenware flat back or corner type size 430 mm x

Providing & fixing 600 mm.x 450 mm. mirror of superior glass

at all floor levels, mounted on 6 mm. th. A.C. sheet or plywood

sheet & fixed to wooden plugs with C.P.brass screws and

washers etc. For all Floor

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5)chamber & water tight C.I. cover with

frame of 300mmx300mm size (inside) with weight includ.

plastering smooth inside & outside 15mm. th' in C.M.1:3 etc.

comp. (i) Square mouth traps---(A) 100mm x 100mm Size -P

(B) 150mm x 100mm Size- P Type 0.00 NO 1246.92

Prov. & Fixing S.W. Gully trap with C.I.grating brick

masonary (C.M 1:5)chamber & water tight Pre cast R.C.C.

87 74 7 cover of 300mmx300mm size (inside) includ. plastering 5.00 NO 1098.48

smooth inside & outside 15mm. th' in C.M.1:3 etc. comp. (i)

Square mouth traps---(A) 300mm x 300mm Size -P type

(B) 150mm x 100mm Size- P Type 0.00 NO 1053.20

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with Inside

dimension ,455 x 610 mm & 450 mm deep sewer trap chamber

with 23 cm th' B.B. masonary

walls in C.M 1:5 with cement plaster 15 mm th' in C.M. 1:3

inside & outside to exposed faces, R.C.C. top slab with 1:2:4

mix ( 1 cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame to

be not less than 38 kg. On top etc. comp. for single pipe.

.(A).Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 EACH 222.71

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & construction simple chamber of 23 cm. th' B.B.

Masonary in C.M 1:5 with cement plaster 15 mm th' in C.M.

1:3 inside & outside to exposed

faces, R.C.C. top slab with 1:2:4 mix ( 1 cement: 2 Sand :

Grade stone aggregate 20mm size) ,Foundation concrete 1:5:10

& fixing C.I. cover with

frame to be not less than 38 kg. On top etc. comp. Inside

dimension,455 x 610 mm &450 mm deep for single pipe

(A) Same as above but Precast RCC heavy duty Cover instead

Extra for every additional depth of 0.1 mt beyoung 0.45 mt 0.00 EACH 242.39

Providing, Lowering & laying joining R.C.C. NP2 CLASS

90 77 7 Pipe In C.M. 1:1 of following nominal internal diameters incl.

Testing of pipes and joints etc. Comp

Providing & laying in trenches galvanised mild steel

tubes(medium grade) TATA / ZENITH / ASIAN / JINDAL

MAKE of the following nominal bore & tube

fittings etc. comp..- 25mm.dia.

Providing & Fixing to wall, ceiling floor at all floor levels,

galvanised mild steel tubes(medium grade) TATA / ZENITH /

ASIAN / JINDAL MAKE of the

following nominal bore, tube, fittings & clamps incl. making

good the wall ceiling and floor etc. complete.

Providing & Fixing C.P. Brass screw down bib tap at all floor

levels, polished bright etc. comp.-(A) 15mm dia. For all Floors

Providing & Fixing gun metal check or non return full way

wheel valve at all floors levels, etc. complete. (A) 15 mm. 20.00 NO 186.83

Providing & Fixing chromium plated brass half turn flush cock

94 81 8 at all floor levels, of approved quality incl. fixing in pipe line 20.00 NO 263.77

etc. Comp.-- 25 mm dia.

Providing & Fixing abonite ball cock of approved qualities

directed etc. comp. (A) 25 mm. dia.

Providing and fixing C.I. Machinehole cover 0.60 x 0.45 mt.

Size having weight not less than 35 Kg. etc. complete.

Providing & Fixing U-PVC pipe (SWR) confirming to IS no.

13592 (Type "B") of Prince/Supreme/Jain/Astral/Tulsi/Finolex

make for soil and waste discharge system at all floor levels incl.

All fixtures like bends, tees, shoe etc. jointed with resin of

approved brand & manufacture etc. comp. (M.R.) (a)75mm

Providing & fixing U-PVC pipes Confirming to IS no.

(Type "A") of Prince/Supreme/Jain/Astral/ Tulsi/Finolex make

for rain water at all floor

levels incl. fixtures like bends, tees, shoe etc joined with resin

of approved brand & manufacture etc. comp. (M.R.) (A)

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of Prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water supply line

at all floor levels incl. fixtures like

bends, tees, shoe etc joined with resin of approved brand &

100 87 8 manufacture etc. comp. Pipe shall be fixed on the wall the help

of clamp at every two meter C/C

or shall be concealed as directed including necessary fittings

etc. including testing of pipe and joints and fixing the same

with adhesive solvent, including cost of all materials.

Providing and fixing PVC SWR Nahni trap IS 14735 for drain -

110x110 mm diameter with jali of the following nominal

101 88 8 diameter of self cleaning design with C.I. scread down or 20.00 NO 558.36

hinged grating including the cost of cutting and making good

Providing & Fixing in position PVC Cowl vent to pipes of

102 89 8 Prince/Supreme/Jain/Astral/Tulsi/Finolex make etc.Comp. (A) 20.00 NO 40.00

Providing & fixing M.S. Holder Bat clamps at all floor levels

of approved design to C.I. Or S.C.I pipes including the cost of

cutting holes & making good the wall etc. Complete - 100 mm.

Providing & fixing G.I./Aluminum Patti clamps at all floor

levels of approved design to C.I. Or S.C.I pipes including the

cost of cutting holes & making good the wall etc. Complete -

100 mm. dia. (M.R.)

Providing erecting and fixing double coated Sintex/Super/Reno

PVC (ISI) mark water tank of required capacity each with all

necessary fittings &

connection etc. complete on terrace.

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as per

instruction given by Eng. incharge. for

(A) 75 mm PVC PIPE 20.00 RM 173.00

(B) 100 mm /110 mm PVC PIPE 20.00 RM 180.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ piles)

& disposal of the surplus excavated soil as directed within a

lead of 50 M. For following

diameter of piles.

Providing & laying cement concrete 1:2:4 (1 cement:2 sand:4

graded stone agg. 20 mm nominal size)& curing comp.

108 95 9 Includ.cost of form work but exclu. Cost of reinforcement for 10.00 C.M 3637.34

reinforced concrete work in : (A) Foundation, footing, Base of

columns and Mass concrete.

Providing & laying ordinary cement con.1:2:4

(1cement:2sand:4graded graded stone agg. 20 mm nominal

109 96 9 size) finishing smooth curing etc. comp.

Incld. Cost of form work but excl. Cost of reinforcement for

R.C.C. Work in : Up to G.L./P.L. (A) COLUMNS:

(1)Having c/s area up to 0.08s.mt 5.00 C.M 12123.79

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 10658.16

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 8692.87

(B) BEAMS : C.M

(1)Having c/s area up to 0.08s.mt 3.00 C.M 8593.80

(2) Having c/s area more than 0.08 sq. mt. & upto 0.12 sq.mt 0.00 C.M 7665.60

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M 6578.07

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

110 97 9 crushed stone agg. 20 m.m Nominal size)& curing comp. incl. 10.00 C.M 3982.62

cost of from work in: wall caps/ copings.

Steel work welded in built up sections, framed work including

111 9 cutting, hoisting, fixing in position and applying a priming coat

of red lead paint

(A) in beams & joists channels angles, tees, flats with

connection plates or angle cleats as in main & cross beams,hip 10.00 QTL 9047.86

& trussed purlins connected to common raffers & the like

(B)For work like chain link fencing, above compound wall etc. 10.00 QTL 9047.86

(C)in trusses & trussed purlins upto 25m.Span &15m.Overall

Providing and fixing G.I. chain link of 50mm x 50mm size x

10 guage thick with nuts, bolts, washer or G.I. pins, excluding

M.S. angles etc.complete as per relevent IS specification &

directed by engineer in charge. (TATA or Jindal Make)

Providing and fixing and fitting TATA or Jindal make G.I.

barbed wire fencing with necessary barbed wire (12 x

113 100 9 guage, weight not less than 0.14 kg. / mt.) pins, hooks, 100.00 KG 125.00

excluding M.S. angles etc. complete as per relevent IS

specification.& directed by engineer in charge

Providing & fixing colouron galvaniced steel, zinc / aluminium

allus coated sheet 0.5 mm. thick roofing fixed with gslvanised

grom J or L hook bolts and bolt 8mm dia with bituman and

impet washer filled with white lead etc.

Excluding the cost of purlins rafter and trusses. (Tata / Jindal or

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter

with bitumen and G.I. limpet washer

or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses. (1) 0.80 mm

thick sheet. (Tata / Jindal or equivalent)

Providing corrugated G.I. Sheets of class-3 roofing fixed with

glavanished iron J or L Hooks, Bolts and nuts 8m diameter

with bitumen and G.I. limpet washer or G.I. limpet washer.

filled with white lead complete excluding the cost of purlins,

Rafters and Trusses. (1) 0.63 mm thick sheet. (Tata / Jindal or

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary

connection with rain water pipes.(i) 0.8 mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet

118 105 9 fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. 15.00 R.M 641.94

limpet and bitumen washer complete (1) 0.80 mm thick

Providing & fixing 150mm wide 450mm over all semicircular

plain G.I. sheet class-3 gutter with iron brackets 40mm x 3mm

size bolts, nuts, washers etc. including marking necessary

connection with rain water pipes.(i) 0.63mm thick

Providing ridges or hips 600mm over all in plain G.I. sheet

120 107 9 fixed with G.I. "J" of "L" hooks bolts and nuts 8mm dia G.I. 10.00 R.M 464.00

limpet and bitumen washer complete (1) 0.63mm thick sheet

Providing & Fixing UV stabilise FRP Sheet roofing with

overlapping the main cladding on both edges. All fixing holes

must be predrilled oversize as specified for the sheet length and

fastener being used. Fasteners must be fitted with approved

washers. Fixings should be tightened to ensure a weatherproof

seal but they must not be over tightened Side-lap fasteners must

121 108 10 also be installed at specified centers with the FRP sheet having

clearance holes provided as per the main fasteners

Weatherproofing shall be provided at all flashing points under

the normal flashing by the fitting of a foam closure strip to

match the profile being used. Closure strips will be sealed to

the sheet with an appropriate non setting silicone sealant.

Excluding the cost of purlins rafter and trusses.

(a) 1.5 mm thick 0.00 SM 992.00

(b) 2 mm thick 0.00 SM 1100.00

Providing & Fixing Polycarbonate sheet roofing with surface of

the sheet is coated with an anti-UV Co-extrusion layer having

good weather resistance, it

can maintain its optical properties and mechanical performance

for a long time. Fasting is usually done by screws. , The

fastening screws should be inserted about 500 mm apart and

300mm apart Along the supporting

internal purlin and edge pulin.All fixing holes with diameter at

least 2 mm larger than screw must be predrilled into each screw

location. The screws

should be 6mm diameter with length according to sheet

thickness and corrosion resistant, with at least heavy duty hot

dripped galvanized or stainless steel. Excluding the cost of

purlins rafter and trusses.

(a) 1.5 mm thick Solid Sheet 0.00 SM 1261.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

(b) 2 mm thick Solid Sheet 0.00 SM 1510.00

Providing & Fixing 80 mm dia M.S. pipe as vertical post are

beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

Providing & Fixing 50 mm dia M.S. pipe as vertical post are

beded in 1:1.5:3 concrete also horizontaly in line and

connecting to purline angle etc by welding rereting etc. (a)

Medium duty "B" Class

Providing & fixing black board on walls of 1.8mt.x1.2mt size

made up to 12 mmth.B.W.P .Plywood (Brand

Saras,Kitply,Uniply, Anchor, Green,Wood Stock or century)

fixed with teak wood beading of 65 mmx 50mm size, rubbing

& sanding comp., incl. applying two coats of black board paint

over a priming coat on plywood & French polishing the frame

all round etc. Comp. as per

instruction of Engineer in charge (M.R.)

Providing & fixing Green board on walls of 1.8mt.x1.2mt size

made up to 18 mm th.ply (using IS 710 Marin ply) with 1 mm

thick outside green board &

126 113 10 0.8mm backside white laminate & with good Quality of 5.00 NO 5195.00

adhesive with appropriate fittings of Alluminium fittings or

teak wood bedding 65 mmx 50mm size, rubbing & sanding

comp., as per instruction of Engineer in charge (M.R.)

Providing & fixing White board on walls of 1.8mt.x1.2mt size

127 114 10 of 12mm thick with appropriate fittings and Alluminium 1.00 NO 4230.00

fittings comp., as per instruction of Engineer in charge (M.R.)

Providing & Fixing Reading table size 8' x 4' and height 2'-6"

with table top 18mm thick (Brand Saras,Kitply,Uniply,

Anchor, Green,Wood Stock or

century) commercial plywood with 1.0mm thick lamination

128 115 10 sheet fitting with teakwood moulding table top supported on 3" 2.00 NO 14774.00

x 3" teakwood leg & 3" x 11/2"

teakwood framing top and bottom with french polish labour

work hardware etc. as per site in charge instruction and as per

Providing & Fixing Librarian table with 18mm thick

commercial plywood (Brand Saras,Kitply,Uniply, Anchor,

Green,Wood Stock or century) )with

1.0mm thick lamination sheet table top supported on 2" x 2"

teakwood leg & make 3 nos. drawers of 1' 3" width on both

side with necessary french polish hardware labour etc. as per

site incharge instruction and as per drawing ( Size 4' x 2'-6" x

2'-6", all framing other then legs are teak wood of size 2" x 1")

Providing & Fixing simple 12mm thick commercial plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) Rack of size 6'

x4' and depth 1'-6" 5 Nos. horizontal partition, supported 2" x

1" framing with necessary french polish hardware labour etc. as

per site incharge instruction and as per drawing.

Providing & Fixing fitting commercial 8mm thick plywood

(Brand Saras,Kitply,Uniply, Anchor, Green,Wood Stock or

century) magazine stand

of Size 6' x 4' with 3" x 11/2" vertical supporting and

adjustable lag support and horizontal simple 2" x 1" teakwood

patti for magazine support with necessary french polish

hardware labour etc.as per site in charges instruction and as per

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing, supplying & placing precast RCC Woodeny

benches as per given specifications. (Seating plank dimensions

: Seating Length of the Bench : 1380 mm, Seating width of the

Bench : 450 mm, Seating height of the Bench : 450 mm,

Seating plank thickness : 60 mm, Total height of the Bench :

900 mm. ) M-30 grade of Concrete using

vibration compaction process. Benches consists of 2 Nos. L-

shape base support in wooden texture and 1 Nos. flate back and

1 Nos. bottom plank leg thickness :90 mm, Leg hight : 830 mm,

Leg width : 600 mm, backside plank width : 350 mm, backside

plank length : 1380 mm, backside plank thickness :

mm.Bench top and back planks are treated with special

anticorrosive, water proof

coating, prevent sun, rain, light and fungal attack, as to make

surfaces glossyand water proof.The back rest should show as

details given by SMC in embossed at casting time.

Providing and fixing stainless steel ( Grade 304) railing made

of Hollow tubes, channels, plates etc., including welding,

grinding, buffing, polishing and making curvature (wherever

required) and fitting the same with necessary stainless steel nuts

and bolts complete, i/c fixing the railing with necessary

accessories & stainless steel dash fasteners , stainless steel bolts

etc., of required size, on the top of the floor or the side of waist

slab with suitable

arrangement as per approval of Engineer-incharge, (for

payment purpose only weight of stainless steel members shall

be considered excluding fixing accessories such as nuts, bolts,

fasteners etc.).

Providing & fixing Z - clamps at all floor levels of approved

design to C.I. S.C.I. or PVC pipes including the cost of cutting

holes & making good the wall etc.

Complete - 100 mm dia as per architect instructions.

(C) 110 mm dia to upto 150 mm dia 0.00 NO 90.00

(C) 150 mm to 200 mm dia 0.00 NO 98.00

Providing and constructing sandwitch type Polish Kota Stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including one

end side Polish Kota stone (Double Polish) of 1.25 mt. height

& front Polish Kota stone patti of

cm wide, vertical partitions of half B.M. wall in C.M. 1:4 and

10mm th. plaster in 1:3 with finishing smooth with cement

slurry as required and Stainless Steel

sink of 0.45 mt x 0.45 mt size of approved quality and make

with required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors.

Providing and constructing sandwitch type Granite stone

cooking platform 0.6 mt. wide & 0.75 mt. height, including one

end side granite stone (Double

Polish) of 1.25 mt. height & front granite stone patti of 10 cm

wide, vertical partitions of half B.M. wall in C.M. 1:4 and

136 123 11 10mm th. plaster in 1:3 with finishing smooth with cement 5.00 RMT 3128.00

slurry as required and Stainless Steel sink of

0.45 mt x 0.45 mt size of approved quality and make with

required all fitings & fixitures etc. comp as per instruction

given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and fixing 150 mm wide, approved quality chicken

wire mesh (FRP / PVC)at junction of brick work and RCC

work or two dissimilar surfaces, at all

heights fixed by nails, rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing, scaffolding all

complete as directed.

Providing and filling Epoxy grout of approved or suggested

brand by consultant / Engineer in charge in 4mm to 6mm thick

tiles joint including spacer with cleaning of joint by vacuum or

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent make

including cost of all equipments,

tools, material, labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed, which

shall be submitted and got approved from the authority prior to

start of work. The rate shall also include cost of drilling of hole

139 126 11 of required diameter and depth as mentioned in manufacturer's

specification, cleaning the hole with required air

blower and other necessary tools and tackles, positioning,

providing and grouting chemical, allied fixtures and fasteners,

etc. but excluding the cost of

reinforcing bar etc. complete. Item includes necessary

scaffolding, staging, labour, tools and equipments, etc.

complete as directed by the engineer-incharge.

Providing and fixing rolling shutters of approved make made of

80 mm wide M.S. laths inter locked together through their

entire lenght and jointed together

at the ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and arrangements for

inside and outside locking with push-pull operation including

the cost of hood cover and spring

etc. complete (A) Shutters having width below 3.5 M.

Providing and fixing rolling shutters of approved make made of

80 mm wide M.S. laths inter locked together through their

entire lenght and jointed together

at the ends by end locks mounted on specially designed pipe

shaft with bracket plates, guide channels and arrangements for

inside and outside locking with push-pull operation including

the cost of hood cover and spring

etc. complete. (B) Shutters having width 3.5 M and above

Providing & Fixing 3 mm thick metal sheet with CNC cutting

to fix it on vertical surface.Steel work welded in built up

sections, framed work including

cutting, hoisting, fixing in position and applying a priming coat

of red lead paint in beams & joists channels angles, tees, flats

with connection plates or angle cleats as in main & cross

beams, hip & trussed purlins connected to common raffers &

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and laying broken china mosaic flooring for terrace

using 12mm to 20mm broken pieces of glazed tiles to be laid

over cement mortar 1:3 to plain

143 131 12 or slope and to be tempered to bring mortar creme out upto 10.00 SM 747.29

surface using white cement including rounding off junctions

and extending them upto 15 cm along the wall clearing with

water and oxalic acid etc. as directed.

Providing and Fixing Hollow steel Sections Framed Work

including Cutting, Hoisting, Welding & Fixing in position

Purlin, Main Chord etc. as per Engineerin-

charge.TATA / JINDAL / ASIAN Make

Providing cement vata (10 cm x 10 cm size) quarter round in

145 133 12 cement mortar 1:1 including neat cement finishing, watering 100.00 RM 23.68

Supplying and erecting floor mounting stand for keeping four

nos. of FIRE buckets comprising 1500mm in lenght, 900mm

height frame made out of 30mm x 30mm x 4mm angle from

with cross supports for legs, welded with

hooks and duly painted with one coat of red lead and two coats

of approved enamelled silver paint.

White Washing with lime on wall surface to give an even

shade & surface incl. throughly brooming the surface to

remove dirt, dust mortar drops & losse scales of lime wash &

other foreign matter Two coats.

(A) walls 0.00 S.M. 12.41

(B) Ceiling 0.00 S.M. 13.53

---do Extra Subsequant coat over above Item

(A) walls 0.00 S.M. 5.73

(B) Ceiling 0.00 S.M. 6.21

Colour washing with lime on wall over & incl. a

primary coat of white washing to give an even shade &

148 2 15 surface incl. throughly brooming the surface to remove all

dirt, dust mortar drops & loose scales of lime wash & other

foreign matter.Two coats.

(B) Ceiling 50.00 S.M. 14.65

---do Extra Subsequant coat over above Item

(A) walls 100.00 S.M. 7.96

(B) Ceiling 50.00 S.M. 10.04

Distempering two coats with oil bound washable

distemper of approved brand & manufacture & of

required shade on wall surface to give an even shade

over and & including a priming coat of alkali

149 3 15 resistance primer of approved brand after throughly

brushing the surface to give an even shade after throughly

brushing the surface free from mortar droppings and

other foreign matter and also including preparing the surface

even and smooth.

(B) Ceiling 50.00 S.M. 80.35

---do Extra Subsequant coat over above Item

(B) Ceiling 50.00 S.M. 33.57

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to

150 4 15 give an even shade including thoroughly brushing the 100.00 S.M. 40.59

surface free from mortar dropping and other matter and

sand papered smooth.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

151 15 surface to give an even shade including throughly 50.00 S.M. 79.39

5 brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth.

For every subsequent coat Extra over item no.above 50.00 S.M. 33.72

Distempering two coats on previously

distempering wall (without primer) with oil bound

washable distemper of approved brand & required shade

152 6 15 on wall surface to give an even shade after throughly 200.00 S.M. 57.59

brushing the surfaces clean of all grease, dirt loose

places of sceles & also including preparing the surface

even and smooth.

Applying Priming coat over new steel and other metal

surface after over and including preparing the surface by

153 7 15 throughly cleaning oil, grease dirt and other foreign matter 200.00 S.M. 35.00

and scoured with brushed fine steel wool, scrapers and sand

paper with ready mixed priming paint brushing red lead.

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters.

Painting one coat (excluding priming coat) on

Previously Painted steel and other metal surface with

155 15 synthetic enemal paint, burshing to give an even shade 100.00 S.M. 38.03

9 including cleaning the surface of all dirt, dust and other

foreign matters.

For every subsequent coat Extra over item no.above 0.00 S.M. 38.18

Applying Priming coat over new wood & wood

surface after & incl. preparing the surface by throughly

156 10 15 cleaning oil grease dirt & other foreign matter sand 200.00 S.M. 41.05

papering & knetting Really mixed paint brushing priming

Painting two coats (excluding priming coat) on New

wood & wood based surface with enamel paint to

give an even shade & surface incl. cleaning of all dirt,

dust & other foreign matter.

Painting two coats (excluding priming coat) on

previously painted wood & wood based surface with

enamel paint to give an even shade & surface incl. cleaning

of all dirt, dust & other foreign matter.

Polishing with french polished on New wood & wood

based surface to give an even surface incl. cleaning the

surface of all dirt, dust & sand papered smooth incl. a

cost of wood filler.

Polishing with french polished on previously

polishing wood & wood based surface to give an even

surface incl. cleaning the surface of all dirt, dust & sand

papered smooth incl. a cost of wood filler.

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Painting two coats of enamel paint over priming coat

(including priming coat) on wall after removing entire

surface dirt, dust foreign matter & also incl. preparing the

surface even & sand papered smooth etc. comp.(M.R.)

Painting two coats of enamel paint (Excluding

priming coat) over previously painted wall after

removing entire surface with even shade & surface after

removing dirt, dust foreign matter etc. comp.(M.R.)

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including applying

exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved by

architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation :

surface is thoroughly clean, dry and free from all loose

dirt, chalk, grease, fungi, algae and flaking paint. This can

be achieved by brushing with a wire/ stiff coir brush, followed

by water jetting if required. Fill up all minor cracks and

defects with white cement and sand mixture in the ratio

1:3. For application on previously painted wall, previous

coatings of paint must be thoroughly scraped off and

Clean the surface thoroughly using wire brushes. Priming:

Apply a liberal coat of exterior acrylic primer and allow it to

dry for 4-5 hours. Application of putty is not recommended.

Minimum 4-6 hours duration is required between each coat

of weather shield max paint

Providing and fixing extruded aluminium window having

extruded aluminium Powder Coated section frame main outer

size 127 mm x 38.10 mm x 1.35 mm (of Jindal section

no.2443, @ Wt. 1.384Kg/mt) horizontal Four track member

122.20 mm x 31.75 mm x 1.10 mm (of jindal section no:8935, @

Wt. 1.398 Kg/mt.) with sliding shutters of horizontal member

size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949,

@ Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated

aluminium fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc. complete for window.

(A) Same as above but Colour anodized 20.00 S.M. 2140.33

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 95 mm x 24 mm x

mm (of jindal section no:2459 @ Wt. of 0.738 Kg/mt), horizontal

Three track member size 92 mm x 31.75 mm x 1.30 mm (of

jindal section no;8688, @ Wt. 1.07 Kg/mt), vertical member of

size 92 mm x 31.75 mm x 1.50 mm (of jindal section no:8933,

165 2 17 @ Wt. 1.06 Kg/mt) with sliding shutters of horizontal member 5.00 S.M. 1591.87

size 40 mm x 18 mm x 1.29 mm (of jindal section no:8947 @ wt.

of 0.456 kg/mt), vertical member of size 40 mm x 18 mm x

mm (of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with powder

coated aluminium fittings & fixtures and transparent silicon

sealant glass fixing to frame as per details etc.

(A) Same as above but Colour anodized 20.00 S.M. 1591.87

Providing and fixing window having extruded aluminium Powder

Coated section frame main outer size 63.50 x 38.10 x1.95 mm

(of Jindal section no.4605, @ Wt. 1.094Kg/mt) horizontal Two

track member size 61.85 mm x 31.75 mm x 1.20 mm (of jindal

section no:8687, @ Wt. 0.695 Kg/mt.) vertical member of size

61.85 mm x 31.75 mm x 130 mm (of jindal section no:8758 @

wt. of 0.659 kg/mt) with sliding shutters of horizontal member

166 3 17 size 40 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ 10.00 S.M. 1705.67

Wt. of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm thick

tranparent bronze colour tineted float glass with powder

coated aluminium fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc. complete for

(A) Same as above but Colour anodized 20.00 S.M. 1705.67

Providing and fixing standared extruded of aluminium

section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with colour powder

coated alluminium frame for Lovered Glass ventilation with

4 mm thick Figured glass as details etc. complete for

(A) Same as above but Colour anodized 20.00 S.M. 2414.00

Providing and fixing standared extruded of aluminium

section of size 61 x 37.0 x0.90 mm (of Jindal section

no.14080, @ Wt. 0.471 Kg per mt) with Powder Coated

alluminium frame with 5 mm thick transparent bronze

colour tinted float glass as details etc. complete for fix

(A) Same as above but Colour anodized 20.00 S.M. 2336.00

Providing & fixing partly panel & partly glass Powder Coated

Aluminium doors with aluminium section of Hindalco,

Jindal , Narmada,Banco or Equivalent approved make

having Poder Coated outer frame Leg Partition section of

63.50 mm x 38.10 mm having weight 1.158 kg. / R.M. shutter

section having size 83.5 mm x 44.45mm ( top & bottom:

1.384 kg./rmt. and middle 1.139 kg./rmt.) door vertical

47.62mm x 44.45 mm ( vertical:0.881 kg./rmt. & top hing

side:0.974 kg./mt.), Glazing Clip (Jindal Section No.

Wt. 0.109 Kg./ Mt.) with 5mm thick sheet glass in acid

frogting and 12 mm thick prelaminated sheet of Greenlam,

Panama or archid make as approved by Engineer-in-charge

fixing brass pivot, handle, lock etc. complete.

170 (A) Same as above but Colour anodized 3.00 S.M. 3237.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & fixing Powder Coated Aluminium partly glazed

and partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved

make having section 63.50 mm x 38.10mm ( Frame-.758

kg/rmt & Middle section- 0.819 Kg./rmt), Galzing Clip with

mm thick clear float glass of approved make including all other

necessary fittings and fixtures. Entire work will have to be made

water proof using necessary rubber sectioned wherever

required. Gaps all round the frame to be filled with approved

water proof sealent. Bottom portion of doors both side to be

covered with 12mm thick prelaminated particle board of

approved make and quality and as per design.

(A) Same as above but Colour anodized 5.00 S.M. 2400.00

Providing & fixing C.P. brass pillar cock with copper

connection,C.P. brass screws complete

Make- Cera, Parry ware, HindWare, Jaquar 20.00 NO. 1423.00

Providing & Fixing 15 mm Dia bib tap with wall Flange at all floor

levels, polished bright etc. comp.

Make- Cera, Parry ware, HindWare, Jaquar 20.00 NO. 1323.00

Providing & Fixing 15 mm Dia 2 way bib tap with wall Flange at

all floor levels, polished bright etc. comp.

Make- Cera, Parry ware, HindWare, Jaquar 20.00 NO. 1755.00

Providing flush cock consisting lever, cartridge sleeve & flange

& concealed part

Make- Cera, Parry ware, Jaquar ,HindWare,Jaquar 3.00 NO. 2110.00

Providing & fixing 15mm C.P. brass angle valve (Stop Cock)

with C.P. copper connecting pipe 450 mm long and nuts,

washer and brass flange complete, including cutting and making

good the wall where required.

Make- Cera, Parry ware, HindWare, Jaquar 30.00 NO. 1432.00

Providing and fixing Wash Down Water closet European type

W.C. pan with integral P or S trap with normal closing seat

cover L bend ncluding jointing the trap with soil pipe in cement

mortar 1:1 (1 cement : 1 find sand) (A) Viterous china pattern - I

Make- Cera, Parry ware, HindWare, Jaquar- 350 x 500 x

Providing & fixing Wash Hung basin with single hole for pillar tap

Size- 550 x 400 mm at all floor levels, with C.I. or M.S. Brackets

painted white incl. cutting holes & making good the same etc.

complete. For all Floor

Make- Cera, Parry ware, Jaquar ,HindWare,Jaquar 10.00 NO. 2656.00

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and 15mm

178 8 21 dia. C.P. spreader,32mm dia CP bottle trap and pipe to wall with

C.P. flange complete including cutting and making good the

walls and floors wherever required.

Make- Cera, Parry ware, Jaquar ,HindWare 10.00 NO. 2476.00

Providing & fixing of overhead shower 80 mm (3”) dia with 3 flow

179 9 21 with Overhead Shower arm 200 mm with wall flange

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 1569.00

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished wall

flange at end of bars with heavy duty anchor fasteners &

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 890.00

SOR SOR 23-24 & MR ( Excl. GST)

Item Pg.No. Description QTY.

No. Unit SOR 23-24 AMOUNT

Providing & fixing S.S.towel rail of 600 mm long approved make

181 11 21 including, providing & fixing C.P. brass screws, making holes in

walls & making good.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 1043.00

Providing & Fixing stainless steel recessed type Soap dish of

182 12 21 approved make. Including providing & fixing screws,

washers,cutting & making good the walls.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 793.00

Prov.& Fixing water closet squatting pan (Orissa type W.C.pan)

at all floor levels, size 500mm x 400 mm incl. 100 mm size "P'or

183 13 22 "S" trap for water closet squatting pan joining the trap with the

pan & soil pipe in C.M. 1:1 (1cement :1 fine sand) etc.

Comp.(A) Vitreous china long pattern

Make- Cera, Parry ware, Jaquar ,HindWare 40.00 NO. 3275.00

Prov.& Fixing Health Faucet ABS Body with wall Hook and

Meter chrome plated PVC Hose Pipe.

Make- Cera, Parry ware, Jaquar ,HindWare 0.00 NO. 971.00

Providing & fixing white vitreous china Ladies urinal of size

470x360X100 mm and 15mm dia. C.P. spreader, and pipe to

wall complete including cutting and making good the walls and

floors wherever required.

Make- Cera 4040101, Parry ware C0503, ,HindWare 60003 0.00 NO 2233.00

Providing & fixing Paper holder with flap guard of 150 mm

186 16 22 long approved make including, fixing C.P. brass screws,

making holes in walls & making good

Make- Cera f5002110, Parry ware T6005A1, Jaquar AHS-

,HindWare F890003

Providing & Fixing pressmatic bib tap with wall Flange at all

floor levels, polished bright etc. comp.

Make- Cera F9020151, Parry ware G2056A1 , Jaquar PRS-043

,HindWare F310016

Providing Metropole Flush Valve Dual Flow 40mm

Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

,HindWare F860075

189 19 22 Providing Sink Cock with Regular Swinging Spout

Make- Cera F2008251 , Parry ware G3321A1 , Jaquar FLR-

5347N ,HindWare F650013