SPECIAL REPAIR TO BLDG NO. 334A (COOK HOUSE) OF 66 MED REGT AND CERTAIN SANCTIONED WORK UNDER AOR OF AGE B/R-I OF

Amount

Demolition of cement concrete in ground floors and pavings n. exe 15 cm thickness (below or above ground level) ,complete all as specified and as directed.

PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in flooring,path , sub foundation etc ,complete all as specified and as directed.

50mm thick PCC 1:3:6 type C-2 using 20 mm graded crushed stone aggregate as in plinth protection or similar places, without using extra cement ,complete all as specified and as directed.

M&L 75mm thick PCC 1:4:8 type D2 using 40mm graded stone aggregate ) as in sub base in plinth protection.

Machine made precast cement concrete blocks (rubberised interlocking paver) of 60mm thick with 6mm top layers of ante abrasive rebbrised material laid over & including 25mm thick sand cushion . The interlocking joints shall be filled with fine sand. The compressive strength of layer shall not be less than 350 Kg/Cm2 ,complete all as specified and as directed.

Machine made precast cement concrete curb stone blocks using Cement concrete 1:3:6 type C2 (20mm stone agg) ,complete all as specified and as directed.

M&L for roughly squared stone lintels hammer dressed on face and soffits hoisted set and pointed in CM (1:6) complete n,exc 3m in length

M&L for 5 cm thick sand stone slabs as in chajjas n.exc 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in cm 1:4 complete.

M&L for Jodhpur stone roof slabs self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set jointed and grouted in cm 1:3 complete.

M&L for PCC 1 : 2 : 4 Type B0 using 12.5 mm graded stone aggregate as in roof curb including weathering, slightly rounded or chamfered angle and throating etc as directed.

M & L for 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in DPC complete all as specified and directed.

M&L for 50mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregates as in roofs, finished the surface even and smooth with WPC complete all as specified and directed.(Note : WPC measured & paid saperetely)

Supply only Integral water proofing compund.

Demolition of stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified & as directed.

Squarred rubble walling Jodhpur type regular coursed well bonded ,bedded and solidly hearted built in cement mortar 1:6,complete all as specified and as directed.

All as per item No 15 above but except stone ,complete all as specified and as directed.

PCC solid building blocks 10 cm thick type B1 1:2:4 set in cement mortar (1:6) ,complete all as specified and as directed.

Extra over squared rubble stone walling Jodhpur type regular course for hammer dressing to face of stone with max depression on face from a straight edge not exc 20mm and dressing,complete all as specified and as directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises ,complete all as specified and as directed.

20mm thick cement concrete type B-0 1:2:4 (using 12.5 mm graded crushed stone aggregate) complete all as specified and as directed.

15mm thick screed bed or bedding layer in CM 1:6 floor finished even & rough to receive tiling/floor finish ,complete all as specified and as directed.

Non-skid coloured ceremic tiles (ist quality) joint less 7 to 8 mm thick area of each tiles exceeding 0.18 Sqm but n.exc. 0.38 sqm in floor etc set jointed in neat cement slurry and pointed in white or coloured cement to match the shade,complete all as specified and as directed.

All as per above but skirting/dado including 10 mm thick rendering in cement mortar 1:4 ,complete all as specified and as directed.

Non skid ceramic colour joint free tiles (ist quality) 6 to 7 mm thick of size area exc 0.11Sqm but nexc 0.18 Sqm in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match,complete all as specified and as directed.

Glazed colour ceramic tiles( ist quality) (of size 250x350xx7mm/300x450x7mm, laid in vertical surface dado/skirting joint free etc, set and jointed in neat cement slurry and pointed in coloured tiles to match the shade of tiles ,complete all as specified and as directed.

10mm thick rendering in CM 1:4 over stone masonry surfaces incl finishing the surface fair & rough to receive tiling etc ,complete all as specified and as directed.

20 to 22 mm thick granite(table rubbed & polished) of approved colour in steps, jambs, pillars, window cills, cooking platform and like in cement mortar 1:4 including pointing in white cement (1:2) using marble dust with admixure of pigment to match with shade of granite,complete all as specified and as directed.

Rubberised coloured chequrred tile 25cmx25cmx25cm/30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry as in floor with grey cement and pigment over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Taking down existing cement plaster including racking out joints, hacking for key, scrubbing down with water etc ,complete all as specified and as directed.

18-20 mm thick mirror polished Kota stone as in shelves incl fixing in walls & making good ,complete all as specified and as directed.

18 to 20 mm thick machine cut Kota stone slab flooring over screed bed base ,laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing and polishing icluding 15 mm thick screed bed in cement mortor 1:6 ,complete all as specified and as directed.

18- 20 mm thick Kota stone slabs as in skirting , risers of steps & other vertical surfaces etc including 10mm thick rendering in CM 1:4 as backing coat ,complete all as specified and as directed.

Sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarfwall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm as in repair,complete all as specified and as directed. Make -Blue star/Nirali

Rendering 10 mm thick CM (1:3) on concrete surfaces on ceiling / facia /RCC Chhaja etc all as directed & finished even & smooth complete all as specified & directed.

15mm thick rendering in CM 1:6 finished even and smooth without extra cement on stone wall surface ,complete all as specified and as directed.

Excavation in trenches for fdn n.exc 1.5m wide and n.exc 1.5m in depth & getting out in soft /loose soil

Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm

Removing excavated at a level n.exc 1.5 m above the starting point

M & L sand filling under floors or foundation spreading and levelling in layer n exc 25 cm thick well ramming including watering and consolidation complete all as specified and directed

Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L 50 mm thick PCC 1:2:4 Type B-1 as a floor finish over sub base.

M&L for mortice lock 2 lever vertical type size 100 mm brass body for aluminium doors as per sample,complete all as specified and as directed.

PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring benching to drain, coping, etc and the like edge slightly rounded or chamferred including necessary use and waste of form work ,complete all as specified and as directed.

Racking out joints/pointing to square rubble masonry Jodhpur type regular coursed built in cement mortar ,complete all as specified and as directed.

Keyed pointing to square rubble masonry Jodhpur type regular course in CM 1:3 ,complete all as specified and as directed.

Three coats of white wash on newly plastered/unplastered surface of wall including preparation of surfaces ,complete all as specified and as directed.

One coat of white wash on old surface of walls ,complete all as specified and as directed.

Preperartion of newly plastered surfaces on wall and applying one coat of wall putty with fair finished and even surface and applying two coat of oil bound distemper ,complete all as specified and as directed.

Two coat of colour wash on newly plastered/ unplastered surfaces over one coat of white wash on wall & including preparation,complete all as specified and as directed.

Two coat of cement base paint over a coat of white wash on plastered/unplastered surfaces of wall including preparation of surface ,complete all as specified and as directed.

Preperartion of old plastered surfaces of wall and applying one coat of oil bound distemper ,complete all as specified and as directed.

Three coats of white wash on newly plastered surface of ceiling including preparation of serfaces ,complete all as specified and as directed.

One coats of white wash on old surface of wall ,complete all as specified and as directed.

One coats of white wash on old surface of ceiling ,complete all as specified and as directed.

Applying two coats of synthetic enamel paint on new wooden surfaces of any description over 10 cm width or girth over a coat of pink primer including preparation of surfaces ,complete all as specified and as directed.

Applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth over a coat of red oxide primer including preparation of surfaces ,complete all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame ,complete all as specified and as directed.

Taking down chowkhats or frame exc 1.5 Sqm but not exceeding 4 Sqm each,complete all as specified and as directed.

Taking down shutter of any description, exc. 1 Sqm but n exc 2 Sqm each ,complete all as specified and as directed.

2nd class hard wood 35mm thick factory made skeleton shutters, open rebated and prepared to receive wire gauze etc, edge of framing shall be plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc.,complete all as specified and as directed.

2nd class hard wood 35 mm thick factory made paneled door shutter ( two pannel) factory made with lock rail and panel of 9 mm thick BWP commercial ply or 12 veneered particle board with commercial veneering on both faces , the size of rail and style as per IS 1003 (part-I) klin seasoned and chamically treated ,complete all as specified and as directed.

Flush shutters 30 mm thick, solid core construction and plywood face panels, both face is covered with decorative face veneer with lipping/frame to match,complete all as specified and as directed.

Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made of MS tubes for top & bottom rail. MS frame shall be covered with heat moulded plain color pvc ‘C’ channel having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and plain color pvc sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted to the MS Frame/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, all as specified.Make Rajshree

Solid PVC door frame of size 50x47mm made out of 5mm thick pvc sheet reinforced with MS square tube all as specified.

Aluminium anodised handle extruded section of size 150mm long complete all as specified and directed.

Aluminium anodized,tower bolt 200 mm long

Aluminium alloy anodised sliding door bolt 300 mm with hasp and stalpe (bolt type and fixings clips of sheet cast or extruded sections and fixings bolts and sliding bolts of extruded sections and fixed 16mm dia and 300mm long ,complete all as specified and as directed.

Mild steel butt hinges 100 mm size complete all as specified and directed.

Stainless steel butt hinges 100 mm size.

100mm size single action door spring hinge complete

Floor door stopper of alluminium alloy body and toungue anodised with hard drawn steel spring 40mm longs.

Aluminum anodised handle extruded section of size 150mm long complete all as specified and directed.

Flat iron for hold fast and similar work confirming to Fe-290 Gde-E-165

PCC 1:2:4 type B1 Mix using 20mm graded stone aggregate as in hold fast iron fixing including necessary form work ,complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description,complete all as directed.

Framed work using MS angle iron , rectangular hollow sections. Solid Sq Bars, Flat iron, MS Channel sections , or hollow structural tubes etc incl necessary cutting & bending to shape & welding together complete as in gates , cattle traps , overhead trusses , railings etc as per the design & patterns complete all as directed at site.

Dismantling of asbestos cement/GI// PVC ( corrugated , semicorrugated , etc ) sheet in roof covering.

Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified.

Cutting openings, throughstone walls for door, window and other openings or enlarging existing openings, converting window into door openings, etc. or cutting out defective brick work for under-pinning, including providing, fixing and removing shoring, cleaning and stacking bricks, removing surplus serviceable mtrl to store and rubbish not exc. 50m,complete all as specified and as directed.

Taking down steel window/ventilator ,complete all as directed.

Mild steel box type window with side hung shutter with glazing bar with or without cooler opening as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 ,complete all as specified and as directed.

Mild steel box type window with side hung shutter without glazing bar with or without cooler opening as per drg. Ce/JZ/TD/20to23 sheet1/3 to 3/3 ,complete all as specified and as directed.

Mild steel box type ventilator with side hung shutter with glazing bar as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 ,complete all as specified and as directed.

Mild steel box type ventilator with side hung shutter without glazing bar as per drg. CE/JZ/TD/20to23 sheet1/3 to 3/3 ,complete all as specified and as directed.

Supply and fabrication of Mild steel guard bars and welded to window frames ,complete all as specified and as directed.

4mm thick pinheaded sheet glass panes of size not. exceeding 0.5 Sqm fixed with oil putty,complete all as specified and as directed.

3 mm thick plain glass ordinary quality & glazing,complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.00 mm ,complete all as specified and as directed.

MS with PVC coated decorative 25mm curtain rod with fixing brackets etc as in repairs ,complete all as specified and as directed.

Vitreous china wash down water closet Anglo Indian Type pedestal pattern with seat & cover as in repairs with jet spray complete incl fixing of flush pipe etc complete all as specified and directed. Make:- Jaquar/Parryware

Vitrous china wash basin as in repairs, white flat back size 450x300 mm including , waste pipe, MS brackets, pvc connection etc ,complete all as specified and as directed. Make:- Jaquar/Parryware

S&F chromium plated toilet paper holder complete.

S&F vitreous china bowl type flat back urinal pot of snow white with division plate complete.

S&F PVC connections 15mm size with PTMT nuts of length 450mm

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 110mm bore ,complete all as specified and as directed.

Dismantling of cast iron or AC drain pipe/ PVC pipe jointed in cement mortar of size 75mm bore ,complete all as specified and as directed.

100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor ,complete all as specified and as directed.

75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor ,complete all as specified and as directed.

100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed

75 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall ,complete all as specified and as directed.

100mm CI bends any radius complete ,complete all as specified and as directed.

75 mm dia CI bend with oval acess door fixed to pipe ,complete all as specified and as directed.

100mm dia CI vent cowl fixed to pipe complete all as specified and directed.

PVC SWR floor trap plain grating including jointing with solvent cement 75mm dia,complete all as specified and as directed.

SWR guly trap 125/110mm setting and jointing with solvent cement,complete all as specified and as directed.

Chromium plated 15mm dia pillar cock long neck with aerator ,complete all as specified and as directed.

25 mm dia stop valves, cast copper alloy with screw down high pressure with crutch or butter fly handle screw both ends for iron pipe or for union & fixed of 25mm dia ,complete all as specified and as directed.

15 mm dia angular stop cock with chromium plated long thread with flange ,complete all as specified and as directed.

S& F 15 mm dia stop cock regular body with adujstable wall flange with chromium plated with (concealed type) all as specified .

S&F 15mm bore stop valves cast copper alloy, screwed high pressure with crutch or butterly handle screwed both ends iron pipe & fixed.

S&F of Swivel shower of CP/PTMT any colour for fixing with 15mm pipe (Minimum weight 40gms) with A shower arm 15mm size, 195mm long with bend of 45 degreee with flange of PTMT any colour. (Minimum weight 40 gms). Make Prayag

15 mm dia two way angular stop cock with chromium plated long thread with flange ,complete all as specified and as directed.

15 mm dia bib, cock long body with flange with chromium plated fixed with iron pipe ,complete all as specified and as directed.

Low level flusing cistern PVC 10 ltrs capacity with float valves (ISI Marked) white with inlet ball valve including float and includign pvc connection etc ,complete all as specified and as directed.

Dismantling water tanks of capacity exc 500 ltrs but.nexc 1000 ltrs and removing to store all as specified.

Rotational moulded polythene water storage tanks ,triple layer (cylindrical vertical with closed top hoisted and fixed in position all as specified in SSR Part -I capacity of tank Make Syntex 1000 ltrs including tank led cover complete with fixing arrangement ,complete all as specified and as directed. Make Sintex/Star

20mm dia Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed ,complete all as specified and as directed.

50 thick PCC (1:2:4)Type B-1 using 20 mm graded stone aggregate for water tank plinth ,complete all as specified and as directed.

Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm with necessary fitting on steel/ wooden surface ,complete all as specified and as directed.

Demolition of reinforced cement concrete of as staircase, landing, chajjas and similar suspended work of any description and any position not otherwise,complete all as specified and as directed.

Pre-cast RCC using 20mm graded aggregate as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles set in CM 1:6 ,complete all as specified and as directed.

TMT bars 6 to 8mm dia and over, cut to length , bent to shape required including cranking, bending & binding with MS wire (annealed ) not less than 0.9mm dia or securing with clips, as in stirrups also ,complete all as specified and as directed.

PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as bed to drain pipe including packing under and haunching against side of pipe after they are laid and tested in for 150 mm dia pipe complete all as specified and directed.

Supply , laying jointing and testing 150mm bore reinfirced conctete pipes class NP-2 laid and jointed in cement mortor 1:1 complete with collars or socket/spigot type laid jointed and haunching at side in cement complete all as specified and directed. (Note- cement concrete used for haunching concrete shall be measured and paid separatly),complete all as specified and as directed.

Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching as required,complete all as specified and as directed.

Soap dish of CP/PTMT fixed with screws complete all as specified and directed.

CP towel rail 450mm long fiexd to wall with chromium plated brass screws and woodn cleats Min weight 170gms approved make ,complete all as specified and as directed.

Taking down or up steel tubing and connection including cleaning for refixing or removal to store ,complete all as directed.(a) 25 mm dia.

(b) 20 mm dia

(c ) 15 mm dia

Steel water tubing, medium grade, galvanized, with all fittings fixed to wall ,complete all as as directed. (a) 25 mm dia,

(b) 20 mm dia

(c ) 15 mm dia including cutting chases, pinning in & making good to disturbed portion to match the existing surface etc complete.

Snap grid frame work of powder coated prefabricated GI channel for false ceiling of size 600x600mm with ceiling board PVC laminated Gypsum board 8mm thick and fixed as per manufacturer instructions incl as per sample kept in GE's office ,complete all as specified and as directed.

Pre powder coated Anodized aluminium frame for door fram, door,window,ventilator shutter with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed by E in charge.

5mm thick tinted/frosted sheet glass fixed with aluminium channel/snap grid and rubber beading packing in door, window and ventilators and securing complete all as directed.

Door closer hydraulically regulated, Aluninium (extruded section) body designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg fixed complete all as speciied.

Taking down carefully copper/aluminium point wiring for light, fan, bell socket power slocket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket, ceiling rose etc ,complete all as directed.

Point wiring complete with 1.5 sqmm, single core, multi stranded, copper conductor, PVC (FRLS), insulated, unsheathed cable, confirming to IS-694, 1100 volts grade, ISI marked, in and including PVC concealed conduit (MS), ISI marked not less than 20mm, with accessories fixed on surface of wall/roof/ceiling etc and including sunken pressed steel terminal boxes in wall but including 3mm thick plastic laminated sheet top cover (ISI marked hylem sheet Make Anchor and 1.50 sqmm PVC insulated unsheathed stranded copper conductor for common earth and connecting to earth dolly material and labour for :- (a) One light point controlled by one, one way switch

(b) One fan /Exhaust fan, point controlled by one way switch.

(c) One socket outlet 3 pin 6 Amps on same board

(d) One socket outlet 3 pin 6 Amp on independent board

All as per item No 2 above but with 2.5 Sq mm single core multistanded copper conductor cable for 3 pin 16 Amp socket outlet on independent board .

Switch flush type single pole one way 6 Amp ISI Marked

Switch flush type single pole one way 16 Amp ISI Marked.

Socket out let , 5 pin , 6 Amp Flush Type.

Socket out let , 3 pin ,16 Amp Flush Type. ISI Marked

Socketed stepped type electonic fan regulator flush type , ISI Marked.

Ceiling rose, 3 terminal/PVC/ polycarbonate, isolated body, ISI Marked.

Insulated Batton lamp holder metal cased body of brass with back plate suitable for batton fittings ISI Marked.

LED tube light fitting Box type 20 watt complete with all accessories such as bipin holders connector block, etc internally pre-wired , including LED lamp-1No, connectiong up with , multistranded copper conductor of size 1.00 sq mm flexible cable Make :Crompton Fitting Cat No-DMLN1LTD8-16 & LED Lamp Cat No-LTT8-20 or equivalent in Havells Cat No LHEXBHP7PN1W020 /philips Cat part No-BN150W LED20S complete all as specified.

Sub main wiring with 6.00 Sq mm single core multistrandred copper conductor PVC insulated and unsheathed cable passing through PVC concealed conduit and making good the distrurbed surface of wall inc 6 Sq mm single core copper conductor cable PVC insulated and unsheathed cable as earth wire. Note :- Two runs of cable 6 Sqmm and One run of 6 Sqmm shall be measured as unit length.

Distribution board in sheet metal with 200 Amps rated copper bus bar Confirming to relevant IS.SPN 8 way, Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

Prewired distribution board in sheet metal Prewired when MCB to be used with 200 Amps rated copper bus bar Confirming to relevant IS TPN , Make;-Legrand/ABB/Havell's Note -Rate are deemed to be included for flashing in wall concealed complete, making good and matching existing surface.

MCB Single pole 5 to 30 Amp, 10 kA, ISI Marked.

MCB SPN 63 Amp, 10 kA, ISI Marked.

MCB 4 pole 100 Amps, 16 kA, ISI Marked.

Connecting, and commissioning of street light fitting 30/45 watt LED , IP-65 protection, single peice pressure dia cast aluminium alloy housing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and contror gear compartment with high voltage surge protection device upto 4.5 KV, Prewired including 1.60 mtr long 40mm bore light grade GI pipe mounting bracket made to shape with and including MS clamp of F1 40 mmx6mm with bolts , nuts & washers and conductor to fitting with 3 core 1.5 sqmm pvc insulated cable complete all as specified cat part No LSTO-30/45-CDL of CG or equivalent in Havell,s/ Philips.

Earthing complete with galvanised steel earth plate electrode 60 x60cm x 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) wih top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate no. 3 connected to Earthing test point all as specified or indicated including testing on completion Note : (i) Rates are deemed to be included for necessry earth work ,PCC pit , RCC cover etc complete. (ii) Earth lead shall be up to 7.5 Mtr and rates are deemed to be included for GI pipe 15mm Light grade upto 7.5 mtrs for protection of earth wire 4.0 mm dia.

Supply and lay cable XLPE insulated screened meter PVC bedded gal vanized steel strip or wire armored , electric power cable (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sq mm 4 core.

Note for all above items:All items are for "Material and labour /Supply and fix" and to be executed in "Repairs" only incl taking down old materials unless otherwise specifically mentioned as "Supply only" or "fixing only" in BOQ. Contractors are requested to quote their rates accordingly.

shri prabhu construction

KRISHNA CONSTRUCTION COMPANY

SURESH TRADERS

M/s Chawariya Enterprises