ADDTN/ ALTN AND SPECIAL REPAIR TO CERTAIN OTM BLDGS OF INF BN (TA) AT CALICUT STATION UNDER GE (ARMY) TRIVANDRUM

Amount

B/R Works Dismantling of asbestos cement (corrugated, semicorrugated, etc.) sheets in roofing complete all as specified and as directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc under 40 sqcm in section in any position, in un-framed work complete all as specified and as directed.

Dismantling timber scantlings 40 sqcm and over in section in any position, unframed work complete all as specified and as directed.

Material and labour for 2nd class hard wood, clean sawn, as in scantling, purlins, rafters etc fixed to timber frame work complete all as specified and as directed.

Refixing of second class hardwood scantlings, clean sawn as in rafters, purlins fixed to timber un-framed work complete all as specified and as directed. Note: Serviceable wood obtained from item No 3.00 described here-in-before ahall be reused

Material and labour preparing surfaces of wood and wood based materials, new or old surfaces of any description and girth, not otherwise described and treated with two coats of creosote oil all as specified and directed.

Material and labour for mild steel work of rectangular or square tubular section as in purlins/ battens/ rafters including special shaped washers etc. conforming to IS 1161-1979 grade St-240 etc. complete all as specified and as directed.

Material and labour for mild steel rolled joist, channel, angle, or tee sections, fixed independently, with connecting plates, etc, using Fe 410-W, Gde E-250 quality -A (cut to ordinary lengths i.e. within 20mm of the length indicated) etc complete all as specified and as directed.

Material and labour for plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment using Fe 410-W, GdeE-250 quality-B etc complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-0 using 12.5mm graded stone aggregate in roof kerbs of mud stops, rounded or chamfered complete all as specified and as directed.

Supply and fix Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge

Supply and fix Pre- painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick as per approved profile of any colour having tensile strength of 550 Mpa as in roof covering/ on Chajjas, fixed with self tapping screws or L type or J type or cranked hook bolts or as per manufacture instruction complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red zinc chrome primer complete all as specified and as directed.

Supply and fix mild steel wind ties for roof including securing bolts, all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Supply and fix mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290,Gde-E-165 etc complete all as specified and as directed.

Supply and fix welded mild steel wire fabric complete to steel members not exceeding 4 Kg/Sqm complete all as specified and as directed.

Demolition of brick/ stone/ PCC block masonry built in cement mortar including all quoins, pillars etc and removing the debris outside of MD land from the premises complete all as specified and as directed.

Material and labour for precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate exceeding 10cm in width and setting in cement mortar 1:6 etc complete all as specified and as directed.

Material and labour for providing precast cement concrete block masonry with solid blocks made out of PCC 1:3:6, type C-1 with using 20mm graded stone aggregate not exceeding 10cm thick (with plain or interlocking joints as directed) setting in cement mortar 1:4 as in internal walls etc complete all as specified and as directed.

Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and as directed.

Material and labour for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces on internal walls, finished even and smooth with out using extra cement complete all as specified and as directed.

Material and labour for 15mm thick rendering in two coats (10mm + 5mm) 10mm thick in cement mortar 1:6 and 5mm thick in cement mortar 1:4 mixed with integral water proofing compound @ 3% by weight of cement on stone masonry surfaces on external walls, finished even and smmoth without using extra cement in second coat of cement mortar 1:4 etc complete all as specified and as directed. Note: Integral water proofing compound will be measured and paid separately

Material and labour for rendering 5mm thick in cement mortar 1:3 on ceiling surfaces, finished even and smooth with out using extra cement complete all as specified and as directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards, slabs, blankets, any thickness, including cover fillets all as specified and as directed

Material and labour anodised aluminium snap grid of size 605 x 605mm frame work for false ceiling complete all as specified and as directed.

Supply and fix Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and as directed.

Material and labour for hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long complete all as specified and as directed.

Material and labour for non asbestos fibre cement decorative type buildings boards of 4mm thick inserted to aluminium frame work fixed with screws in ceiling flat or sloping complete all as specified and as directed.

Supply and fix Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions in ceiling flat or sloping in jointless finish with jointing compound and jointing tape as per manufacturer complete all as specified and as directed.

Material and labour for preparation of new ceiling surfaces apply two coats of distemper oil emulsion white or tinted over a coat of alkali resistant primer complete all as specified and as directed.

Demolition of cement concrete (unreinforced) not exceeding 15cm thickness in ground floors and pavings work complete all as specified and as directed.

Material and labour Hardcore of gauge not exceeding 63mm using broken stone or boulders deposited, spread and levelled in layers not exceeding 10cm thick, watered and rammed to a true surface complete all as specified and as directed.

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil complete all as specified and as directed.

Removing excavated material (soil) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and as directed.

Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded aggregate as in 75 mm thick plinth protection, finished even and fair including necessary form work etc complete all as specified and directed

Material and labour for treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and as directed.

Material and labour for Anti Termite Treatment ie treating under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

Material and labour for Anti Termite Treatment ie treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and as directed.

Material and labour for plain cement concrete 1:2:4, type B-1, using 20mm graded stone aggregate as in 25 mm thick floor, finished even and fair etc complete all as specified and as directed.

Material and labour screed bed or bedding layer in cement mortar 1:4, 15mm thick for laying floor finish complete all as specified and as directed.

Material and labour screed bed or bedding layer in cement mortar 1:4, 20mm thick for laying floor finish complete all as specified and as directed.

Material and labour for 10mm thick backing coat in cement mortar 1:3 on stone masonry surfaces for fixing of wall tile, finished even and rough complete all as specified and as directed.

Material and labour for Vitrified Ceramic tiles, light shade, 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc, set and jointed in neat cement slurry and including grouting of joints complete all as specified and as directed. Note : Payment for grouting of joints to be made separately.

Material and labour for grouting the joints of flooring/wall tiles having joints of 3 mm width spacer, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete all as specified and as directed.

Material and labour for laying matt finished vitrified tile 10mm thick, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm having water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades, shapes & patterns in steps etc including grouting the joints with white cement mixed with matching pigments etc. complete all as specified and as directed.

Material and labour for Vitrified Ceramic tiles light shade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in skirting, riser of steps etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for light shade joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for light shade joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm, in skirting, riser etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for coloured joint free non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Material and labour for light shade Glazed ceramic tiles in vertical surface 350 x 250 x 7 mm / 450 x 350 x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

Taking down chowkats or frames in repair with shutter of any description not exceeding 1.5sqm each (without taking off shutter from frames) complete all as specified and as directed.

Taking down chowkats or frames in repair with shutter of any description exceeding 1.5sqm but not exceeding 4sqm each (without taking off shutter from frames) complete all as specified and as directed.

Supply and fix for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P.brass/stainless steel screws, all complete as per architectural drawings and complete all as specified and as directed.

Supply and fix for providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and complete all as specified and as directed.

Supply and fix powder coated aluminium grill of approved design/ pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, etc complete as per requirement all as specified and as directed.

Supply and fix mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe.290, Gde-E-165 etc complete all as specified and as directed.

Supply and fix flat iron hold fast and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Material and labour for cement concrete 1:2:4 type B1 using 20mm graded stone aggregate etc in linteks upto 1.5m clear span,cills,steps, seismic and othet similar bands,plinth courses,string courses,lacing courses,parapets nd railing upto 60cm height,copings,kneelers,apex stones,bed plates,water troughs and like including weathering,slightly rounded or chamfered angles and throating as directed completed allas specified and as directed.

Supply and fix second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and as directed.

Material and labour for 2nd class hardwood 30mm thick plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats framing is moulded on solid (for each side) complete all as specified and as directed.

Supply and fix for 2nd class hardwood glazed and skeleton shutters, 30 mm thick open rebated and prepared to receive glass, gauze, etc., but divided into squares, with plain, chamfered or rounded,mitred and rebated sash bars,any numbers fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), and fitted to chowkats complete all as specified and as directed.

Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement Door handle, lock and stopper etc.to be paid separately and making necessary holes etc. for fixing required door fittings, all complete all as specified and as directed.

Supply and fix sheet glass is ordinary or frosted, on one side 5.5 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix ordinary sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix solar control film exceeding 1.50 Sqm, 25 micron reflective type sticked to glass panes as per instructions of manufacturers complete all as specified and as directed.

Material and labour for 9mm thick prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination fixed to Aluminium frame work like door, partition etc complete all as specified and directed.

Supply and fix stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix stainless steel butt hinges, medium weight fixed, 100 mm long complete all as specified and as directed.

Supply and fix Aluminium 2 levers Mortice lock, vertical type, size 100 mm long for FRP doors complete all as specified and as directed.

Supply and fix extruded aluminium alloy handle fabricated type anodized 150mm size complete all as specified and as directed.

Supply and fix aluminium anodized sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy 300mm long, ISI marked complete all as specified and as directed.

Supply and fix floor door stopper overall length of cover plate 140mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor complete all as specified and as directed.

Supply and fix in repairs curtain rails 25 mm dia, anodised aluminium alloy with fixing brackets, stops, rollers etc. complete all as specified and as directed.

Material and labour for preparation of new plastered surfaces and preparing surface even and smooth using 3mm thick wall care putty (in two coats) and and distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification (Two or more coats) over a coat of primer complete all as specified and as directed

Material and labour complete removal of existing treatment on surfaces of wall by scrapping down old treatment and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour preparation of newly plastered surfaces of wall and finishing walls with Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 litre/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and directed.

Material and labour for preparation of new unplastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparing back of chowkats of area not exceeding 0.50 Sqm each and treated with tar or coal tar black paint complete all as specified and as directed.

Supply and fix Fiber Glass Reinforced plastic (FRP) Door Frames of cross section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2mm thick and shall be filled with suitable wooden block in all the three legs.The frame shall be covered with fiber glass from all sides.M.S. stay shall be provided at the bottom to steady the frame.,complete as specified by the manufacturer and complete all as specified and as directed.

Supply and fixing 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table 3 of IS: 14856 complete all as specified by the manufacturer and complete all as specified and as directed.

Supply and fix 1000 litres capacity triple layered Rotational Moulded Polyethylene (HDPE) FDA grade materials water storage tanks, (Cylindrical vertical with closed top) screwed lid type conforming to IS 12701-1996 with manhole lid and suitable locking arrangement including making holes for inlet, outlet, washout and over flow pipes, hoisted and fixed in position as specified in SSR Part -I (2009) including taking down existing tank etc complete all as specified and as directed

Supply and fix in repairs ball brass valves, 25mm bore high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm girth complete all as specified and as directed.

Supply and fix 15mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of GI pipe 15mm bore complete all as specified and as directed

Supply and fix 20 mm bore unplasticised PVC pipes of pressure rating 10 kgf/cm2 fixed complete to walls, ceilings or in floors etc., any type of pipe including taking down of GI pipe 20 mm bore complete all as specified and as directed.

Dismantling of cast iron drain pipe75/ 100mm dia complete all as specified and as directed.

Supply and fix PVC SWR pipe single socketed in any length with rubber ring joints, 110mm dia laid in trenches or on floors complete all as specified and as directed.

Supply and fix PVC SWR pipes single socketed in any length with rubber ring joints, 75mm on floors complete all as specified and as directed.

Supply and fix PVC SWR bends any radius 75mm with access door complete all as specified and as directed.

Supply and fix PVC SWR bends any radius 110mm with access door complete all as specified and as directed.

Supply and fix PVC (SWR) junction single, (Single T) equal or unequal 110mm complete all as specified and as directed.

Supply and fix PVC (SWR) Gully trap 125/110mm setting and jointing with solvent cement as in repairs complete all as specified and as directed.

Supply and fix in repair 75mm PVC SWR floor trap plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix grating square 150mm size of PTMT complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash down water closet pan with P or S trap (pedestal pattern), white including Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and as directed..

Supply and fix in repairs 10 Litres capacity, PVC Valve less, Syphonic action type, low level flushing cistern, white, with inlet ball valve, float, handle, flush pipe of polyethylene of low or high density of PVC, 32mm dia including brackets and connections to pipe of Make Slim line or Cera or equivalent make complete all as specified and as directed.

Supply and fix in repairs fush pipe of polyethylene of low or high density or PVC. 32 mm dia, for low level cistern to squatt pattern closet incl. all joints and making good to the floor complete all as specified and as directed.

Supply and fix Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix table top wash basin with C.I brackets, cutting and making good the walls wherever required white vitreous china angle back wash basin size 495x395x150mm complete all as specified and as directed.

Supply and fix15mm pillar taps cast copper alloy with capstan heads, chromium plated screwed down high pressure ,with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and fixed but fancy type complete all as specified and as directed.

Supply and fix in repairs toilet paper holder with flat recessed type stainless steel, fixed to walls with chromium plated (CP) brass screws complete all as specified and as directed.

Supply and fix in repairs waste fittings brass chromium plated for sinks ,WHB etc with long screwed shanks and fly nuts flange end bedded in red lead cement and other end fixed, 32mm dia fixed complete all as specified and as directed.

Supply and fix PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix in repairs chromium plated fancy type Bib tap cast copper alloy with crutch or butterfly handle screwed and down screwed for iron pipe or for brass ferrule 15mm complete all as specified and as directed.

Supply and fix in repairs stop valves, 15mm bore cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.

Supply and fix in repairs tubular towel rail 20mm dia D type 600 mm long between flanges brass chromium plated complete all as specified and as directed.

Supply and fix in repairs, sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever mild steel angle brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling, PVC waste pipe of 32mm bore of suitable length etc complete all as specified and as directed.

Supply and fix Vitreous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) inclusive of Vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed

Supply and fix urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms complete all as specified and as directed.

Supply and fix vitreous china urinal partition white of size 310x700 mm complete all as specified and as directed.

Material and labour for 12mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws to timber frame work complete all as specified and directed .

Supply and fix stainless steel nickel plated slip-on soft close concealed hinges of size 11 x 6 x 3 cm not less than 150g for Cabinate doors etc complete all as specified and directed .

Supply and fix ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed .

Supply and fix 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed .

Material and labour for formwork to rough finished surfaces of concrete flat surfaces such as in soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work;not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed .

Material and labour for Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but not exc.10cm wide complete all as specified and directed .

Material and labour for reinforced cement concrete (nominal mix) Type B1 (1:2:4) using 20mm graded aggregate in slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like complete all as specified and directed .

Material and labour for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for granite slab, 20mm thick, machine cut, Jet Black granite slab in single piece or two piece length, table rubbed and polished, laid over and including 20mm thick cement screed in cement mortar 1:4, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust and admixture of pigments to match with shade of granite stone as in cooking platforms, microwave platform, WHB counter top in steps, jambs, pillars, window-cills, etc, including cutting, polishing etc., complete all as specified and as directed.

Material and labour for 20mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

Material and labour for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

Supply and fix stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and as directed.

Supply only Liquid water proofing compound complete all as specified and as directed.

Material and labour for excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth and getting out in soft/ disintegrated rock complete all as specified and as directed.

Material and labour for plain cement concrete 1:4:8 type D-2 using with 40mm graded stone aggregate for foundation filling and mass concrete complete all as specified and as directed.

Material and labour for Precast reinforced cement concrete (Nominal Mix) 1 : 2: 4, type B 1 using 20 mm graded stone aggregate as in manhole cover slab, set in cement mortar 1:4 complete all as specified and as directed.

Material and labour for 15mm thick rendering with cement mortar 1:4 on PCC solid block masonry surfaces and making the surfaces with even and smooth finishing without using extra cement etc complete all as specified and as directed.

Supply and fix PVC (SWR) pipes 160mm bore single socketed in any length with rubber ring joints , or jointed with solvent cement laid in trenches or in floors complete as specified and directed.

Material and labour for plain cement concrete 1:3:6, type C-2 using 40mm graded stone aggregate as in bed to drain pipes for 160mm bore including packing under and haunching against the sides of pipes after they are laid and tested etc complete all as specified and directed.

Returning filling in using excavated soil ramming watering and well ramming in layers not exceediong 25cm complete all as specified and as directed.

Removing excavated soft/disintegrated rock to a distance not exceeding 50 mm and depositing where directed complete all as specified and as directed.

Material and labour for LLDPE septic tank 30 users, conventional type designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, inlet-outlet connection, return filling,removal of soil etc., complete all as specified and as directed.

Material and labour for Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of block masonry in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats all as per TD Dwg complete all as specified and as directed. TD Drg Nos :- TD/ST/744 (Sheet No- 1/1) & TD/ST/746 (Sheet No - 1/1)

E/M Works Taking down carefully copper / aluminium point wiring (light, fan, socket or power) complete including fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials out side MD land in case of Credit and making good disturbed surfaces of walls, floors, etc., complete all as specified and as directed.

Material and labour for point wiring for complete with PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor conforming to IS-694, 1.5sqmm (nominal area), drawn through and including suitable dia non metallic rigid PVC conduit (ISI marked) and accessories concealed in wall/ roof including provision of PVC insulated FRLS cable 1100 volts grade with multi stranded copper conductor 1.5sqmm as earth continuity conductor and connecting to common earth dolly complete all as specified and as directed for the following. Note: (i) Cost of modular type sunken terminal boxes, cover plate with frame (modular plate) for mounting of switches, socket outlets, regulators etc will deemed to be included in the unit quoted rate. (ii) Cost of blank plate required if any will deemed to be included in the unit quoted rate. (iii) Cost of cutting chases in stone masonry/ brick masonry wall/ ceiling surfaces will deemed to be included in the unit quoted rate.

One light / fan / bell point controlled by one, one way switch

One 3/5 pin 5/6 Amps switch socket outlet combination point on independent board.

One 3/5 pin 5 Amps socket point on the same board with other switches controlled by one switch complete all as specified and as directed.

All as per item No 137.00 described here-in-before but for point wiring with 2.5 sqmm single core standard FRLS copper conductor and one run of 2.5 sqmm FRLS copper conductor, standard for earth wire for one 3/5 pin socket outlet point 15 amps on the independent board complete all as specified and as directed..

All as per item No 137.00 described here-in-before but for point wiring with 4 sqmm single core standard FRLS copper conductor and one run of 4 sqmm FRLS copper conductor, standard for earth wire for one 3/5 pin socket outlet point 15 amps on the independent board complete all as specified and as directed..

Supply and fix Modular type switch single pole 6A, one way, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular socket, 6A, 240volts, 2/3 pin combined 2 module, ISI marked flush type complete all as specified and as directed.

Supply and fix Modular switch 1 way 16A, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular Bell push 6A, 1 module, 240V, AC, 50Hz, ISI marked complete all as specified and as directed.

Supply and fix Modular socket, 6A/16A, 240volts, 2/3 pin combined 2 module, ISI marked flush type complete all as specified and as directed.

Supply and fix Ceiling rose, surface type polycarbonate insulated body, three terminal 65x50mm, ISI marked complete all as specified and as directed.

Supply and fix Modular fan step regulator, 120W, 2 module, 240V, AC, 50Hz, ISI marked suitable for ceiling fan of any sweep complete all as specified and as directed.

Supply and fix lamp holder, insulated body of PVC/ polycarbonate type with back plate suitable for angle/ batten fittings, ISI marked complete all as specified and as directed.

Supply and fix Call bell/ buzzer, electric (Ding-dong type) suitable for working on 240 volts AC supply complete all as specified and as directed.

Supply and fixing of recessed/surface mounting 36W LED luminaire prewired with white powder coated CRCA housing with LEDs and fully window acrylic diffuser,suitable for 600x600mm E grid/POP/false ceiling complete with all accessories making connection using 3 core 0.5 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed.

Supply and fixing LED battern extruded aluminium body with PC diffuser in unique square shape>120 degree wide distribution, 4 feet 18W of minimum efficacy 120 lumen/watts LED battern 4 feet 20W CCT 6500K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceble light fittings complete and all as specified and directed

Supply and fixing LED battern extruded aluminium body with PC diffuser in unique square shape>120 degree wide distribution, 2 feet 10W of minimum efficacy 120 lumen/watts LED battern 2 feet 10W CCT 6500K complete including connection upto ceiling rose with flexible copper twin twisted wire including taking down old unserviceable light fittings complete and all as specified and directed

Material and labour for sub main wiring complete with and including two runs of 6 sqmm, single core FRLS, PVC insulated and unsheathed, multistranded, copper conductor cable, single core, 1100 Volts grade drawn through and including non metallic PVC conduit of suitable size including accessories etc as required and concealed in walls/ floors and 6 sqmm PVC multistranded copper conductor cable for earthing and connected to common earth dolly including taking down the existing sub main wiring complete all as specified and as directed. Note : (i) Two runs of 6 sqmm PVC insulated cable and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one unit length. (ii) The cost of cutting chases and the cost of making good the disturbed surfaces is deemed to be included in the quoted rate.

Supply and fix 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, complete all as specified and as directed.

Supply and fix 240V, 10 KA 'B' curve miniature circuit breaker (MCB) of single pole and current carrying capacity SP 40 AMP, complete all as specified and as directed.

Supply and fix MCB, SPN of capacity 40 to 63 Amp, 240V as ordered breaking capacity 10 KA ISI marked complete all as specified and as directed.

Supply and fix in replacement of MCB TPN 63 A , breaking capacity 10 KA, B series ISI marked complete all as specified and as directed.

Supply and fix in repair and providing new sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one double pole MCB of 20 Amps, 240 Volt complete all as specified and as directed.

Supply and fix in repair SPN DB, 8 Way, IP43, IK09, metal double door type, 240 volts, fitted with 200 Amps rated busbar and blanking plates, neutral link and making good the disturbed surfaces with all other accessories including necessary connection all as specified and directed.

Supply and fix of distribution board made out of sheet metal enclosure (CRCA sheet) dust and vermin proof double door, TPN 4 way, 415volts grade with 200 Amps insulated busbar with nickel plated brass, isolated neutral bar and door earthing, earth bar IP-43 protection with poly urethane casketing, IK-08 mechanical impact resistance, door earthing flush to wall, including testing suitable for fixing,MCCB, MCB TP/SP/SPN etc including taking down existing unserviceable one etc complete all as specified and directed.

Taking down carefully existing serviceable ceiling fan/ wall mounted fan, ceiling cable etc and removing the fan for keeping in safe custody then hanging the ceiling fan with down rod after rewiring including clamps, hooks hold fasteners etc and connection up, including making electric connection from ceiling rose or connector to fan complete all as specified and as directed

Taking down carefully existing serviceable exhaust fan, ceiling cable etc and removing the fan for keeping in safe custody then Fixing the exhaust fan and connecting up including provision of cable from ceilig rose/ connector to fan complete all as specified and as directed

Supply and fix BLDC without remote ceiling fans complete with blades down rods electronic regulator and accessories 230V 1200 sweep min air delivery 210 CFM with service 6.00 BEE five star rated with brushless direct current motor (BLDC) complete all as specified and as directed.

Supply and fix exhaust fan AC metallic body single phase 230/240V of size 300mm sweep with louver and all mounting accessories including making exhaust vent hole for exhaust fan of size 300mm dia in wall of toilet and suitable length of twin twisted flexible copper wire from ceiling rose to fan connector and all connecting accessories suitable for 230V AC 50Hz complete all as specified and as directed

Material and labour for Earthing complete with Galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (in vertical position) earth pit not less than 2.25 mtr below normal ground level with the top edge of the earth plate not less than 1.5 m below ground level and connected to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron including PCC pit & cover with suitable handle, including necessary excavation and earth work in any type of soil, 20 mm dia med grade galvanized steel tube for watering with one end fixed with suitable funnel and wire mesh, 15 mm bore medium grade galvanized steel tubing for drawing earth lead GI wire protection (upto 7.5m long) & common salt, charcoal in alternate layers etc. complete all as shown in EP No 3 of SSR Part 1 and testing on completion including taking down complete all as specified and as directed. Note: On completion of the work/ job the Contractor is to perform earth resistance tests for each earthing job in the presence of the Engineer-In-Charge or his rep & submit test certificates duly signed & certified. If the test results are not satisfactory or not within the permissible limits of relevant Standards/ IS then the job is to be redone without any extra cost to the Department till the results are satisfactory.

EURO ENTERPRISES (BID ID -3490803)

EXCEL ENGINEERING (BID ID -3491170)

M/S RADHIKA ENTERPRISES (BID ID -3491117)

B AND H CONSTRUCTIONS (BID ID -3491193)

LAKSHMI BUILDERS (BID ID -3491033)

VIJAY CONSTRUCTIONS (BID ID -3490870)