Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹3.7 Cr
EMD Value
₹6 L
Closing Date
31 Oct 2026, 5:00 pm
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Krishna Bhagya Jala Nigam Limited
vithal
Providing painting by sandblasting method and replacement of rubber seals to the spillway radial crest gates no. 1 to 14 of Almatti Dam.
KBJNL/2026-27/DA/WORK_INDENT3700
KBJNL/2026-27/DA/WORK_INDENT3700
Open
Dam and Allied works
Two Tender Document System(Two Cover)
KBJNL Division Dam Division Almatti
10 documents required · 10 mandatory
Minimum financial turnover (civil engineering construction works) not less than two times the annual payments from this contract (Rs. xxxxx Lakhs)
Satisfactoriy completed (atleast 90%) as prime contractor at-least one such similar work of value not less than Rs. xxxxxxx (80% of estimated cost of tender)
Executed in any one year the following minimum quantities of work (Cement Concrete - xxxx cum, Earthwork - xxxx cum, etc) (80% of peak rate of construction)
Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year
Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)
Liquid assets and /or availability of credit facilities of no less than Rs. xxxxxx Lakhs (estimated cash flow for 3 months of peak construction period)
Total value of civl engineering works executed and payments received in the last five years (year-wise)
List of existing commitments and ongoing works
List of works for which tenders already submitted
Banker Details for reference
Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded
Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years
Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded
List of Financial Resources with Certificates
The intending bidders should be a registered contractor enrolled in valid KPWD Class-II & above.
The Requisite Earnest Money Deposite (in the form of e-cash / e-Bank guarantee / Insurance Surety Bonds issued by Insurance Company authorized by insurance Regulatory and Development Authority of India).
Valid Employees Provident Fund Registration Certificate.
Valid GST Registration Certificate mandatory.Notes:a) The Successful bidder shall furnish within 15 days from issue of letter of intent before entering in to agreement, a Copy of Income Tax returns filed mentioning PAN for the financial year 2025-26 (Assessment year 2026-27) prior to date of entering in to the agreement. Failing which the EMD amount will be forfeited and the tender will be rejected and the bidder shall be liable for subsequent penal action including black listing.b)The amount put to tender is exclusive of GST and the tenderer should quote without GST. However G.S.T will be paid at prevailing rate during billing.
The intending bidder should have in last 5 years i.e. from 2021-22 to 2025-26, Satisfactorily completed (not less than 90% of the contract value), as prime contractor, one similar work costing not less Rs. 186.00 lakhs (not less than 50% of the amount put to tender) in last five years reckoned back from 2025-26)The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the Superintending Engineer of the same Circle or equivalent in case of other Government undertaking within India. The cost will be updated to the present value by giving a weightage of 10% each year..Note-: 1) Similar work means:: Cleaning of gates by sandblasting method and Providing Painting to Vertical/Radial/Stoplog gates Of large dams in India.
The intending bidder in his/its name should have in the last 5 years i.e,2021-22 to 2025-26 achieved in at least 2 financial years, a Minimum financial turnover of Rs. 1273.27 Lakhs.(usually not less than two times the estimated annual payments under this contract)(Rs. 371.37 Lakhs x 2 x 12 months /07 months).The turnover prior to FY 2025-26 will be updated to the Present Price Level () by giving weight age of 10% each year. Audited Profit and Loss account certified by a practicing Chartered Accountant bearing UDIN along with copy of Income Tax returns filed for the years indicated above should be furnished.() FY 2026-27.
The intending bidder should have executed minimum quantity of work in any one financial year,during the last five financial years reckoned from 2025-26. a) Sand blasting for painting(0.8x27,885.00 x12)/07 minimum executed Qty is equal to 38,243.00 Sqm b) One coat of primer paint(0.8x27,885.00 x12)/07 minimum executed Qty is equal to 38,243.00 Sqm c) Two coats of finishing paint(0.8x27,885.00 x12)/07 minimum executed Qty is equal to 38,243.00 Sqm . (The work done certificate should be obtained duly signed from an officer not below the rank of Executive Engineer of the concerned Division and countersigned by the Superintending Engineer of the same Circle or equivalent in case of other Government undertaking )
Tenderers who meet the above specified minimum qualification criteria, will only be qualified, if their available tender capacity is more than the total tender value (Rs.371.37 Lakhs).The available tender Capacity will be calculated as under: Assessed available tender Capacity is equal to (AxNx1.5 - B), where, A is equal to Maximum value of civil engineering works Executed in any one year during the last five years (updated to 2026-27 price level) taking into account the completed as well as works in progress. N is equal to Number of years prescribed for completion of the works for which tenders are invited. B is equal to Value, at 2026-27 price level, of existing commitments and on-going works to be completed during the next 07 months (Period of completion of the works for which tenders are invited) Note:(i) The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.Financial turnover of previous years shall be given a weight of 10% per year to bring them to the price level of (Year inviting the Tender)(ii)Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:(a)made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or (b) record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc.and/or(c) participated in the previous Tender for the same work and had quoted unreasonably high tender prices and could not furnish rational justification.
Bidder should furnish liquid assets and/or availability of credit facilities of not less than Rs.160.00 Lakhs from any Nationalized /scheduled bank (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc. (Usually the equivalent of the estimated cash flow for 3 months in the peak construction period). The format for Bankers Certificate/ Line of Credit (BC/LOC) letter to be issued by the Banks as per circular No. FD-CAM/16/2022(P-2) dated: 22-08-2022.
Availability by owning at least 50% of the required / specified key and critical equipment for this work.However it is obligatory for the contractor to use the following machineries for various activities of road work /Irrigation works involved in construction as per MORTH specification and Irrigation manual. 1) Compressor Own/ Hire/Lease is 2 Nos 2) DG Set Own is 1 Nos Hire/Lease is 1 Nos
₹5,000
₹6 L
12 Oct 2026
12 Oct 2026
3 Nov 2026
19 Oct 2026
22 Oct 2026
in words
Cleaning gates / hoists / embedded parts to expose fresh metal surfce for repainting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, applying a coat of rust inhibitive compound with all other ancillary operations complete.
Rewelding of rusted/corroded welds of gate components with necessary surface preparation by chisseling/ gouging & Grinding the rusted welds as directed including scaffolding,safety tools, complete with all leads and lifts as directed by Engineer in Charge
Providing and applying one coat of zinc rich epoxy primer paint ( zinc content 90% ) of approved quality 40 micron dry film thickness to gates /embedded parts /hoist components including cost of all materials, labour, removing rust, cleaning surface,scaffolding etc.,complete with all leads and all lifts.
Providing and applying two coats of cold applied coal tar epoxy paint of approved quality 100 micron dry film thickness each coat to embedded parts / gates / lifting beam etc., including cost of all materials, labour, removing rust, cleaning surface, scaffolding etc., complete with all leads and all lifts.
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in new seals, fixing new seals / bolts / nuts / washers tightly in position, scaffolding with all other ancillary operations complete. Flat rubber seals and hot dipped G.I bolts / nuts / washers.
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in ew seals, fixing new seals / bolts / nuts / washers tightly in position, scaffolding with all other ancillary operations complete. Z- type rubber seals and hot dipped G.I bolts / nuts / washers.
Three crore seventy one lakhs thirty seven thousand five hundred eighty nine rupees and sixty nine paisa only
Cleaning gates / hoists / embedded parts to expose fresh metal surfce for repainting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, applying a coat of rust inhibitive compound with all other ancillary operations complete.
Spillway Radial Crest Gates
Power pack
Gantry Crane 25 T
Stoplog Elements
River Sluice Gate
Gantry Crane 16 T
Rewelding of rusted/corroded welds of gate components with necessary surface preparation by chisseling/ gouging & Grinding the rusted welds as directed including scaffolding,safety tools, complete with all leads and lifts as directed by Engineer in Charge
Providing and applying one coat of zinc rich epoxy primer paint ( zinc content 90% ) of approved quality 40 micron dry film thickness to gates /embedded parts /hoist components including cost of all materials, labour, removing rust, cleaning surface,scaffolding etc.,complete with all leads and all lifts.
Providing and applying two coats of cold applied coal tar epoxy paint of approved quality 100 micron dry film thickness each coat to embedded parts / gates / lifting beam etc., including cost of all materials, labour, removing rust, cleaning surface, scaffolding etc., complete with all leads and all lifts.
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in new seals, fixing new seals / bolts / nuts / washers tightly in position, scaffolding with all other ancillary operations complete. Flat rubber seals and hot dipped G.I bolts / nuts / washers.
Supplying trained/experienced staff for Operation and maintenace of spillway radial crest gates, sluice gates, out door traversing gantry 25 T & 16 T, stoplog gates etc, including cost of two sets of industrial dress to the labours, small tools and tackles, insurance for labours etc., in complete as per direction of Engineer in Charge.
Quantity
Crest Gate Operators June to November (6 Months)
Month
Gantry Crane operator (Except Monsoon Period i.e. December to May) Two crane operators per shift and considering one shift in a day (2*1*6=12 Months)
Months
Length
Executive Engineer,
KBJNL,Dam Division
Almatti.
Cleaning gates / hoists / embedded parts to expose fresh metal surfce for repainting by sand blasting method as per specifications including cost of all materials, labour, machinery, scaffolding, applying a coat of rust inhibitive compound with all other ancillary operations complete.
Executive Engineer,
KBJNL,Dam Division,Almatti
Rewelding of rusted/corroded welds of gate components with necessary surface preparation by chisseling/ gouging & Grinding the rusted welds as directed including scaffolding,safety tools, complete with all leads and lifts as directed by Engineer in Charge
Executive Engineer,
KBJNL,Dam Division,
Almatti
Providing and applying one coat of zinc rich epoxy primer paint ( zinc content 90% ) of approved quality 40 micron dry film thickness to gates /embedded parts /hoist components including cost of all materials, labour, removing rust, cleaning surface,scaffolding etc.,complete with all leads and all lifts.
Executive Engineer,
KBJNL,Dam Division,
Almatti
Providing and applying two coats of cold applied coal tar epoxy paint of approved quality 100 micron dry film thickness each coat to embedded parts / gates / lifting beam etc., including cost of all materials, labour, removing rust, cleaning surface, scaffolding etc., complete with all leads and all lifts.
Electrician
Crew for Vehicle Truk (Light vehicle driver)
Executive Engineer,
KBJNL,Dam Division,Almatti
Supplying and fixing rubber seals of approved quality including cost of all materials, labour, removing existing worn out / damaged bulb type rubber seals from gates, cleaning surface, making holes in new seals, fixing new seals / bolts / nuts / washers tightly in position, scaffolding with all other ancillary operations complete. Flat rubber seals and hot dipped G.I bolts / nuts / washers.
Per Shift of 8 Hours
Executive Engineer,
KBJNL,Dam Division,Almatti
Supplying trained/experienced staff for Operation and maintenace of spillway radial crest gates, sluice gates, out door traversing gantry 25 T & 16 T, stoplog gates etc, including cost of two sets of industrial dress to the labours, small tools and tackles, insurance for labours etc., in complete as per direction of Engr in Charge.(WRD SR For the Year 2018-19 ).
Basic Rate
Add overhead charges at 10%
Add CP at 10%
Basic Rate
Add overhead charges at 10%
Add CP at 10%
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
KBJNL,Dam Division,Almatti
Materials
Particulars
Mobile Crane
Grinding machine
Particulars
Crew for mobile crane
Crew for grinding machine
Foreman
Heavy Mazdoor
Helpers
Electrician
Materials
Machinery
Labour
Executive Engineer,
KBJNL,Dam Division,Almatti
Particulars
SS Plate
SS welding rod
Particulars
Mobile Crane
Grinding machine
Particulars
Crew for mobile crane
Crew for grinding machine
Foreman
Fitter
Welder
Heavy Mazdoor
Helper
Electrician
Materials
Machinery
Labours
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Particulars
Welding Electrodes(LH)
Description
Welding Transformer
Fuel/Energy Charges
Description
Welder
Helper
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Executive Engineer,
KBJNL,Dam Division,Almatti
Perticulars
zinc rich epoxy primer paint (Vol-IV WRD SR 2023-24 P-19)
Perticulars
Perticulars
Painter ( IV Sl No-5)
Helper ( IV Sl No-5)
Cost of Materials
Cost of Machinery.
Cost of Labour.
Executive Engineer,
KBJNL,Dam Division,Almatti
Perticulars
Synthetic Coal tar Epoxy paint 1st quality (Vol-IV WRD SR 2023-24 P-17)
Perticulars
Perticulars
Painter ( IV Sl No-5)
Helper ( IV Sl No-5)
Cost of Materials
Cost of Machinery.
Cost of Labour.
Executive Engineer,
KBJNL,Dam Division,Almatti
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
PTEPL-AMT-RG-11.jpg
Others - Drawings • 15.08 MB
DTP Gates Painting 1 -14.docx
Tender Document • 21.50 MB
PTEPL-AMT-09.JPG
Others - Drawings • 4.79 MB
BOQ_Gates painting 1 to 14.xls
Others - Schedule -B • 0.12 MB
PTEPL-AMT-08.jpg
Others - Drawings • 17.91 MB
PTEPL-AMT-RG-10.JPG
Others - Drawings • 2.49 MB
Rubber seal drawing.pdf
Others - Drawings • 0.15 MB
PTEPL-AMT-WS-01.jpg
Others - Drawings • 19.49 MB
PTEPL-AMT-05-A.JPG
Others - Drawings • 1.91 MB
PTEPL-AMT-02.jpg
Others - Drawings • 19.66 MB
PTEPL-AMT-06.JPG
Others - Drawings • 3.34 MB
PTEPL-AMT-03.jpg
Others - Drawings • 63.83 MB
PTEPL-AMT-HS-02.JPG
Others - Drawings • 5.98 MB
general arrangements of rc gate.pdf
Others - Drawings • 0.50 MB
PTEPL-AMT-FB-12A.JPG
Others - Drawings • 18.19 MB
PTEPL-AMT-04.JPG
Others - Drawings • 19.02 MB
PTEPL-AMT-07.jpg
Others - Drawings • 8.83 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .