Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹5.5 LAccepted-AOC | 1 | Accepted-AOC agreemented |
| Sl No | Description | Qty | Unit | BASIL MATHEW L1 |
|---|---|---|---|---|
| 1.00Malankara Anganvady | ||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4.94 | cum | 335.74 ₹1,659.23 Lowest |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.88 | cum | 8,620.24 ₹16,223.29 Lowest |
| 1.00 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 0.51 | cum | 7,404.03 ₹3,776.06 Lowest |
| 1.00 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete | 2.55 | sqm | 360.41 ₹919.05 Lowest |
| 1.00 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.64 | cum | 9,789.52 ₹6,245.71 Lowest |
| 1.01 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more | 51.04 | kilogram | 104.93 ₹5,355.63 Lowest |
| 1.01 | 50.6.1.7:Solid block masonry using pre cast solid blocks ( Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15 cm in : CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 2.46 | cum | 6,566.49 ₹16,153.57 Lowest |
| 1.01 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) | 8.97 | sqm | 345.11 ₹3,095.64 Lowest |
| 1.01 | 13.37.1:White washing with lime to give an even shade:New work (three or more coats) | 8.97 | sqm | 37.95 ₹340.41 Lowest |
Tender Value
₹6.5 L
EMD Value
₹13,734
Closing Date
28 Oct 2025, 5:00 pmClosed
ASSISTANT ENGINEER
koliyadi Nenmeni
Retender-Nenmeni GP 2025-26 PR NO-164/25-26-Renovation to various Anganvady Buildings
2025_LSGD_812006_13
AE/LIDEW/NMN/ET/04/2025-26
Open Tender
Civil Works - Roads
Item Rate
KOLIYADI
Please refer Tender documents.
7 documents required · 7 mandatory
₹1,215
Yes
₹13,734
Yes
6 Jul 2026
21 Oct 2025
30 Oct 2025
21 Oct 2025
28 Oct 2025
21 Oct 2025
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1357352.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.21 MB
Tendernotice_2.pdf
PDF • 0.13 MB
Tendernotice_3.pdf
PDF • 0.44 MB
Tendernotice_4.pdf
PDF • 0.25 MB
Tendernotice_5.pdf
PDF • 0.25 MB
Tendernotice_6.pdf
PDF • 0.81 MB
BOQ_1357352.xls
BOQ • 0.32 MB
viewsbd.pdf
Tender Documents • 2.00 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .