PGP 114-26 - DRINKING WATER FACILITES TO PILICODE FHC IN PILICODE GP UNDER ANNUAL PLAN 2025-26

CONSTRUCTION OF WELL

2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil

OD314807/2025-2026:Earth work in excavation by mechanical means (Hydraulic excavator/manual means) over arreas (exceeding 30 cm in depth, 1.5m in width as well as 10sqm on plan lift 1.5m to 3.0m

OD314806/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 3.m to 4.5m

OD314805/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 4.5m to 6.0 m

OD314804/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 6.0 m to 7.50 m

OD314803/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 7.50 m to 9.0 m

OD314802/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 9.0 .m to 10.50m

OD314801/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 10.50 .m to 12.0m

OD400499/2025-2026:Earth work in excavation by mechanical means (hydraulic excavator/manual means) over areas exceeding 30cm in depth,1.5m in width as well as 10 sqm on plan lift 12.00 m to 13.50 m

5.7:Reinforced cement concrete work in well - steining excluding the cost of centering, shuttering, finishing and reinforcement, with 1:1.5:3 (1 cement : 1.5 coarse sand (Zone - III) derived from natural sources derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources derived from natural sources)

5.9.12:Centering and shuttering including strutting, etc. and removal of form for:Well steining

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

OD314882/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for foundation and basement including all cost of materials,labour charges etc.

OD400261/2025-2026:Laterite dry stone masonry with neatly dressed stone of size 35x20x20 cm or nearest size suitable to well circle for well lining including cost and conveyance of all materials and all labour charges etc complete.

OD398768/2025-2026:Laterite masonry with neatly dressed stone suitable to well shape of size 35x20x20 cm or nearest size in cement mortar 1:6 for well lining including cost and conveyance of all materials and all labour charges etc complete (MOD 50.6.7.1 of DAR with additional labour for dressing and lifting)

OD392540/2025-2026:Laterate masonry with neatly dressed laterate stone of size 35x20x20 cm or nearest size in cement mortar 1:6 for superstructure above plinth level up to floor two level including all cost of materials, labour charges etc.

13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

10.25.2:Item Shifted to Sub head 14 as item 14.73 Item Shifted to head 14 as item 14.74 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

50.2.3.1:Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer

13.60.1:Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade:Two or more coats on new work

13.7.2:12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

13.71:Lettering with black Japan pint of approved brand and manufacture

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.