PROVN OF VOCATIONAL LABORATORY (SIZE 10.6 X 7 MTR) AT KENDRIYA VIDYALAYA PITHORAGARH

Amount

DESCRIPTION OF ITEMS

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5M in depth for foundation etc and getting out in hard/dense soil complete all as specified and as directed.

Surface excavation n exc 30cm deep and averaging 15cm deep and getting out in harde/dense soil complete all as specified and as directed.

Returning filling including spreading, levelling, watering and well ramming in layers n exc. 25cm (hard/dense soil)

M&L for Sand filling under floors or in foundations including watering and consolidation

M&L for hard core of broken stone or boulders guage n exec 63 mm deposited and levelled in layers n exec 15 cm thick watered and rammed to a true surface of broken bricks aggregate complete all as spd and directed

Filling under floor (except material) including spreading, levelling, watering and well ramming in layers n exc. 25cm complete all as specified.

Removing excavated material (Soil) n .exc 50 m and depositing, where directed at a level n. exc 1.5 m above the starting point complete all as specified and as directed.

Treating the backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the substructure in contact with backfill to be measured)

M&L for treating top surface of filled earth at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.

M&L for treating the soil under plinth protection at the rate of 5 litre per sqm of surface with anti termite chemical emulsion complete all as specified.

M&L for treating the soil along with external perimeter of building at the rate of 2.25 litre of anti termite chemical emulsion per sqm of the perimeter wall.

M&L PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in foundation, including raft, footings, foundation beams, plinth beams, bases for columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in columns, pillars, piers etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in beams, cantilever, lintels etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in slabs supported on walls, beams and columns etc complete all as specified and as directed.

M&L RCC M-25 (Design Mix) as in chajjas/shelfs complete all as specified and as directed.

M&L RCC M-25 (Design Mix) Fins, fascias, louvres, parapets, and railings exc. 60cm in height, newels, balustrade, and the like complete all as specified and as directed.

M&L form work to sides of concrete foundations, footings, bases of columns, raft and raft beams, plinth beams or similar works vertical or to batter for fair finished flat surface of concrete

M&L form work to sides and soffits of roof beams, lintels lever shelves incl supports over hang etc rough finished surfaces of concrete flat all as specified.

M&L form work to soffits of suspended slabs such as roof slab landings and similar works n exc 200mm thick (horizontal or slopping) for rough finished surfaces of concrete flat all as specified.

M&L form work to chullah hoods, chajjas/shelfs and similar items incl edges rough finished surfaces of concrete flat all as specified.

M&L form work to sides of pillars, posts, struts, columns for rough finished surface of concrete square, rectangular or polygonal all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished surfaces complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, cut to length, bent to shape required incl cranking, bending spirally for hoping for columns hooking ends and bindind with ms wire (annealed) not less than 0.9mm dia quality confirming to all as specified.

Description same as Item No 25 above but, but 6mm to 8mm dia.

Description same as Item No 25 above but, 5 mm dia and over and incl 10mm dia in stirrups, spacers and binders

M&L providing cement concrete 1:2:4 of type B0 using 12.5 mm graded stone aggregate 40mm thick as in damp proof course to horizontal or slapping or vertical incl. necessary form work and applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per sqm and blinding with clean dry sand @ 0.05 cum per sqm complete.

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, and setting in cement mortar 1:6 complete all as specified and directed .

M&L Brickwork with sub- class ‘B’ bricks straight or curved on plan exc 6 m mean radius, in half brick thick walls built in setting in cement mortar 1:4 complete all as specified and directed .

M & L 15 mm thick cement plaster on fair faces of brick work or concrete surface on wall in CM 1:4 mixed with water proofing compound as per manufacturer instruction, finished fair and even complete all as specified and directed. (WPC measured separately)

M & L 15 mm thick cement plaster on otherthan fair faces of brick work or concrete surface on wall in CM 1:6 finished fair and even complete all as specified and directed.

M&L 5mm thick rendering in CM 1:4 on ceiling, soffits, chajja projection complete all as specified and directed

GI wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls, ceilings, stanchions, beams, etc. including all laps, cutting and waste complete all as specified and as directed

M&L for 10mm thick screed bed in CM 1:4 mixed with water proofing compound as per manufacturer instruction , finishing the surface should be even and fair with out using extra cement , complete all as specified and directed. (WPC measured separately)

Supply only water proofing compound, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 of type D-2 using 40mm graded stone agrregate as in sub base of floors etc complete all as specified and directed.

M&L PCC 25mm thick 1:2:4 of type B1 using 20mm graded stone aggregate as in floors finished rough and uneven complete all as specified and as directed.

M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) as in plinth protection laid in alternate panels 75mm thick finished even and smooth w/o using extra cement.

Forming construction joints 30mm deep x10mm wide filled with sealing compound grade "A"

M & L, cement concrete 1:2:4 type B-2, using 40 mm graded stone aggregate as in surface channel or drain complete all as specified and directed.

M & L, forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement including forms, moulds, mitered / stopped ends etc. complete all as specified and directed.

M&L, providing cement concrete1:2:4 type B1 as in , coping ,benching, bressumers, steps, incl necessary form work complete all as specified and as directed.

S&F 1.25 mm thick Pressed steel frame size 125 x 60 for doors with one or more rebates including necessary fixing lugs, hinges ( 125 mm long-06 Nos hinges & 75mm long - 2 Nos for each door ), lock strike plate, hold fast etc., including Frames shall be filled with PCC 1:3:6, type C-0 (12.5 mm graded stone aggregate) complete all as specified and directed.

S & F 32 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 30 mm thick IInd class hard wood glazed skelton shutters devided into square open rebated and prepaired to recive glass,guage etc as in windows and ventilators, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of members of sutters as specified in SSR part - I section - 8, clause 8.20 (a). S&F to chowkhat.

M&L for PCC 1:3:6 type C-1 using 20mm graded stone for embedding of hold fast etc complete all as specified and directed.

S&F 300 mm long aluminium alloy annodised slidding door bolt with hasp and satple (bolt type) and fixing clips of sheet castor extruded sections and fixing bolts and slidding bolts of extruded section or cast aluminium alloy and fixed all as spd and directed

S&F MS 300 mm ordinery rat rail rod pattern spring including roller and roller plate complete all as specified and as directed .

S&F 150mm long floor door stopper of aluminum alloy body and tongue , anodized with hard drawn steel spring complete all as specified and directed

S&F 200mm aluminium anodised barrel tower bolts of extruded section all as specified

S& F 150 mm extruded aluminum alloy handles, fabricated type anodised.

M&L for applying two coat of plastic emulsion paint on newly plastered ceiling with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed.

M&L for applying two coat of plastic emulsion paint on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M & L preparation of new wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer on new wooden surfaces all as specified.

M&L for applying two coat exterior emulsion paint (weather coat of Berger or equivelent ) on newly plastered wall with airless electric sprayers over a coat of primer applied using airless electric sprayers over one coats of wall care putty of 1-1.5mm thickness (suitable for external surface)prepared and sanded with electrically operated sanding machine. application to be done through the authorised applicator of manufacturer complete all as specified and directed..

M&L for double charged Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tilesexceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry over 15 mm thick screed bedding in CM 1:6 and pointed in white or coloured cement to match.

M&L for double charged Vitrified Ceramic tiles10 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 sqm but not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry in vertical surfaces over 10 mm thickplastering in CM 1:4 and pointed in white or coloured cement to match.

M & L, glazed joint free coloured ceramic tiles in vertical surface as in skirting & dado, 7 to 8 mm thick area exc 0.06 Sqm but n.exc 0.18 Sqm over and including 10 mm thick rendering in CM1:4 set & jointed in neat cement slurry & pointed in coloured cement to match complete all as specified and directed.

Granite (of any type of coloured) work (table rubbed and polished) 16-18mm thick in steps jambs,pillars, window cills, cooking plateform /partition and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15mm thick screed bed in CM 1:6 incl moulding, chamfering of edges complete.

S&F sheet glass 5.5 mm thick ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane complete all as specified

Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottomand sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Chief.

S&F SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified and directed.

S&F heavy duty outdoor tiles 300x300mm 8-10mm thick set and jointed in neat cement slurry and pointed in white/ coloured cement to match the shade as in floor over and incl 15mm thick cement screed bed in CM 1:4 complete all as specified and as directed.

M&L for water proofing treatment to roofs surfaces including a coat of cold applied bituminous shalitex primer @ 0.30 Lit per sqm evenly on roof surface and a coat of hot blown bitumen 85/25 @ 1.2 kg/sqm shall be applied on primed surface and laying of 3mm thick APP modified polymeric membrane (weight not less than 3.0 Kg/Sqm) unrolled and bonded completely to the substrate with side over lap of 75 mm & end over lap of 100 mm and then scaled/ fused by flame or bitumen and a coat of hot blown bitumen grade 85/25 @ 1.20 Kg/Sqm shall be applied on top of APP modified polymeric membrane as per manufacture instruction and finally it will be finished with a coat of bituminous aluminium paint @ 0.20 Kg/Sqm, complete all as specified and as directed.

M&L Clean sawn timber fixed and framed Second class hard-wood in scantlings for frame work complete all as spd and as directed.

M& L 18/19 mm thick block boards grade 2 quality interior grade, commercial type fixed with screw to timber frame work as in cup board shutter / shelves/cabinet fixed including both side decorative laminate of thickness 0.9mm type1 of surface finish, colour and pattern as approved, fixed with approved adhessive as per manufacturer's instructions and wooden leaping 5mm thick all round , including continuous (piano) hinges, mild steel,bright finish ,width of flaps (when open) 30mm with welding the same along with existing steel door frame with nails to timbar frame and complete all as specified and as directed

S& F 75 mm Extruded brass handles,fabricated type polished Handles shall be of pattern/design as approved by engg- in- charge complete all as specified and as directed

S & F 75 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws

S&F 1000 liters capacity rotational moulded polyethylene water storage tank (Cylindrical vertical with close top) hoisted and fixed in position including 20mm bore dia of pipe Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 20mm -210 gms ) incl connections all as specified.

Cutting chases in brick wall, stone concrete block or slab walls, pining in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings ,steps,cills sunshades, shelves , lintels, etc and cutting chases for concealed water tubing and making good , cutting n'exc 10 cm girth complete all as specified and directed.

S&F 15 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F 20 mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed.

S&F Sinks made of stainless steel 1mm thick kitchen with plugs washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe bowl size 550mm x 400mm x230mm ,including cupling , west pipe etc complete all as specified and directed.

S&F 110mm bore dia PVC floor trap (SWR) plain with grating including jointing with solvent cement to waste pipe complete all as specified and directed.

S&F 110mm bore PVC(SWR) bends any radius, complete all as specified and directed.

S & F PVC (SWR) junction single,(Single T) equal or unequal 110 mm dia

S & F Soap dish, vitreous China white, approximate size 160x 160x90mm complete all as specified and directed.

S&F Brass chromium plated Tubular towel ring, 20mm dia, D type,complete all as specified and directed.

S&F bib taps cast copper alloy chromium plated fancy type (long body ) with crutch or butterfly handle screw down ,screwed for iron pipe or or brass ferrule for 15 mm bore of pipe.

S&F 15 mm dia Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed .

Material and Labour for cutting of road not exceeding 50 cm wide and 100 cm depth for laying of pipe line and making good the disturbed road with PCC 1:2:4 type B-1 using 20mm graded stone aggregate complete all as specified and directed.

Material and Labour for 15 mm dia bore GI tubing medium grade complete with all fittings laid in trenches/ walls all as specified and directed.

Cutting existing steel tubing for alterations or additions (Each cut measured)

M&L for point wiring with 1.50 sqmm in copper conductor cable ( multistrand) FRLS single core PVC insulated cable in and including PVC concealed conduit with all accessories /fittings including and continuous earth wire 1.5 Sqmm copper cable PVC insulated FRLS controlled by one switch for one light/fan/sockets point/ all as specified and directed by Engr-in-Charge in ceiling Portion surface conduit wiring to be done. . Note : i) Eye/bottle thimbles shall be used for connection in switches/sockets & MCB's in DB's without any extra cost ii) Electric rewiring should be done in proper colour coding i.e. Red for phase, Black for neutral and Green for Earth.

All as per item No 85 above, but for one 3/5 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge.

All as per serial item No 85 here-in-before , but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor ( Multi-stranded) PVC insulated and unsheating electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 1.5 Sqmm copper stranded conductor as continuous earth wire connected to common earth dolly complete all as specified and as directed by Engineer-in-Charge.

M&L for Modular Socket 6A/16A - 2/3 pin 2 module type all as specified and directed.

M&L for Modular Socket, 6A - 2/3 pin 2 module type all as specified and directed.

M&L for Modular switch 1 way 6A, 1module type all as specified and directed.

M&L for Modular switch 1 way 16A, 1module type all as specified and directed.

S&F White cover plate with frame modular type of 3 module complete all as specified and directed.

S&F White cover plate with frame modular type of 8 module complete all as specified and directed.

S& F metal flush box modular type of 03 module complete all as specified and directed.

S& F metal flush box modular type of 08 module complete all as specified and directed.

Supply & fix Sheet metal enclosure with new DB’s suitable for MCBs of single pole and neutral 8 way double door type with 200 amp rated bus bar with digree of protection IP 54 & PU gasket and mechanical Impact strength IK 09. Note: i) Connnections of the MCB'S shall be done with appropriate size of brass/Cooper thimble complete all as specified and directed. .

Supply and fix of MCB SP up to 6-32 Amp all as specified and directed.

Supply and fix MCB SPN 6-32 Amp complete all as specified and directed.

Supply & fix new techonlgy self blasted LED batten lamp with thermoplastic body with PC Diffuser with square shape 20 w 6500 K including neccessary electric conection from ceiling rose to connector with suitable size of cable complete all as specified and directed.

Supply and fixing of Exhaust fan steel body AC single phase 230/240 V OF size 300 mm sweep 1400 RPM with suitable louvers and making connections with twisted copper flexible wire complete all as specified and directed.

Supply and fixing ceiling fans completewith blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFMwith service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC)

Material & Labour local sand dry ,filling in trenches around under ground cable complete all as specified and directed.

M & L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 core

M&L for earthing complete with galvanized steel earth plate electrode 600x600x6mm tthick buried directly in ground(earth plate not less than 2.25 mtr deep below the normal ground level ) with top edge of plate not less than 1.5 mtr below the normal ground level connected to galvanized earth wire 4mm dia by means of nuts bolts,washers,check nuts of iron or steel including test point PCC pits and RCC cover in PCC 1:2:4 (type B-1) including iron angle frme 40*40*6mm. and medium grade GI watering pipe 20mm dia with funnel and wire mesh and 15 mm bore GI pipe light grade proection pipe including excavation and charcoal ,common salt surrounded with 15cm all around the plate all as specified and shown in EP-3 of SSR Part-I NOTE: 1. The drawing listed under list of drawings forming part of tender documents shall be strictly followed for execution of work. However, in case of any description found in the drawing or any changes are inescapable due to site requirement, shall be carried out with prior written approval of GE. GE's decision shal be final and binding and work shall be executed accordingly Each and every item shall be measured and paid as per actual execution of work at site. 2. The minor details which are not shown/given in these drawings shall be followed as per IS provision and departmental TD/STD drawings for execution of work.

m/s RC punetha (BID ID -3314103)

M/S HIRA CHAND (BID ID -3313574)

basant ballabh punetha (BID ID -3310709)

shivam builders (BID ID -3313593)

M/S GD Punetha Son (BID ID -3310318)

RADHEY SHAYAM YADAV AND SONS (BID ID -3314428)

M/S RAMESH SINGH ADHIKARI (BID ID -3314775)

M/S KS Shahi and Sons (BID ID -3310371)

m/s MD pandey sons (BID ID -3316238)