REPAIRS TO JOINERIES, BUIT IN FURNITURES, PVC DOORS, KITCHEN BAKSET AND CONNECTED WORKS AT CERTAIN MD AND OTM ACCNS AT CGRA KOZHIKODE AND ICGS BEYPORE

Amount

Supply and fix 19mm thick plywood, grade BWR, type BB, fixed with adhesive and nails as in cubic cabin/ working table etc in a any shape and in any direction etc to the required size and pattern as in cabin of any pattern and design etc all as shown on drg including taking down old unserciveable one and as directed by Engr in Charge.

Supply and fix 12mm thick plywood, grade BWR, type BB, fixed with adhesive and nails for as in cubic cabin/ working table etc in any shape and in any directionto the required size and pattern as in cabin of any pattern and design etc all as shown on drg including taking down old unserciveable one and as directed by Engr in Charge.

Supply and fix 9mm thick plywood, grade BWR, type BB, fixed with adhesive and nails for as in cubic cabin/ working table etc in any shape and in any direction to the required size as in cabin of any pattern and designand pattern I etc all as shown on drg including taking down old unserciveable oneand as directed by Engr in Charge.

Supply and fix 0.9mm thick decorative laminate type - I of surface finish (colour & pattern as approved) of any colour and pattern ( pattern consists of combination of two or more colour) fixed with approved adhesive as per manufacturers instruction finished to approved size as in cubic cabin/ working table of any pattern and design etc all as shown on drg and as directed by Engr in Charge.

Supply and fix Cast brass powder coated Automatic lock and release Butt hinges of sixe 100mm all as specified and as directed.

Supply and fix Cast brass powder coated Box type decorative door handle of 75mm size fixed all as specified and as directed.

Supply and fix Cast brass powder coated Box type decorative door handle of 100mm sixe fixed all as specified and as directed.

Supply and fix 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc 06 not exc. 13 Sqcm including taking out old fillets all as specified and as directed.

Supply and fix 2nd class H.W. plain cover fillets square, rectangular or triangular in section bull nosed, splayed chamfered or rounded on one edge or face in 2nd class H.W. sectional area exc 03 not exc. 06 Sqcm including taking out old fillets all as specified and as directed.

Supply and fix in repairs butt hinges 125mm size type B-12, cast brass with mild steel hinge pin, bright polished and fixed complete all as specified and as directed by Engr-in-Charge.

Supply and fix in repairs telescopic drawer slider suitable for working table, drawer on andy sixe and any pattern complete all as specified and as directed by Engr in Charge.

Supply and fix in repairs magnetic door catch of approved pattern conforming to IS all as specified and as directed.

Material and labour for French polishing on surface of any description width or girth including cleaning and preparing the surface with a coat of wood filler on new work and two or more coats till the desired finish is obtained all as specified and as directed.

Supply and fix in repairs kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 100 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed.

Supply and fix in repairs kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 200 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed.

Supply and fix in repairs kitchen basket fabricated with stainless steel section (SS-304), best quality (as per sample kept in GE, s office) of size 430 mm x 508 mm x 300 mm for different use such as placing plain plate / dish / cup & saucer /cutlery / thali etc fixed in position with and including one pair telescopic Channel of size 450 mm (when closed), mild steel chromium plated, roller type, heavy duty as directed.

Taking down chowkhats or frame with shuters (without taking shutter from frame) exc 1.5 sqm and n. exc 4.0 sqm and removing from site all as specified and as directed.

Taking down chowkhats or frames not exc 1.5 sqm with shutter(without taking of shutter from the frames) including hold fasts and PCC block all as specified and as directed.

Taking down shutter of any description, shutters of any description n exc 1sq. m each and removing from site all as specified.

Taking down shutter of any description, exceeding. 1 Sqm and not exceeding 2 sqm each and removing from site all as specified.

Supply and fix second class hardwood plain solid straight chowkats and frames wrought framed rebated on chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix 30 mm thick factory made moulded PVC door (Wood free) including frame consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottom & lock rail. M.S. frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multi-chamber hollow PVC section of 1mm wall thickness, bonded using solvent cement / cynoacrylate adhesive with 5 mm (+0.25) thick moulded PVC sheet of density 600 kg/cbm with 2, 4, 6 raised panel deign in plain / prelam colours after routing the moulded design on one side of the inside panel. 5 mm (+0.25) plain / prelam PVC sheet to be pasted using solvent cement / cynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton made by sticking 2 nos. foam PVC sheets of 5 mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of Plain/Prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 nos.) thick PVC sheet to be given for lock provison at lock height. Door to be fixed with frame with 3 nos. stainless steel butt hinges of size 100mm x 25mm x 2mm and 50 mm long steel screws drilled suitable to pass through both the walls of the M.S. tube other hardware should be fixed with 25mm x 8mm size steel screws etc, complete as per manufacturer’s specification and drawing or direction of Engineer-in-charge.

Supply and fix 30 mm thick Flush shutters, solid core construction, with block board core and plywood face prelaminated decorataves panels, commercial type on both sides complete all as specified.

Supply and fix 35 mm thick II class HW Glazed and skeleton shutters, open rebated and prepared to receive glass,gauze, etc. (without sash bars), edges of framing plain, chamfered orrounded. fitted with cut and mitred beads for securing glass, etc.; as per section 8.28 (a) sizes of members of shutters as specified .

Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed including takig down old unservicable one all as specified and as directed.

Supply and fix 100 mm size Mild steel butt hinges medium weight, fixed to chowkhat all as specified and as directed.

Supply and fix 100 mm long aluminium anodised barrel tower bolt all as specified and as directed.

Supply and fix 250 mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and as directed.

Supply and fix 300 mm, size mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Material and labour for Preparation of new wooden surface of any description not otherwise described over 10cm width or grith and applying two coats of synthetic enamel paint over pink prime including preparation of new wooden surface all as directed and as specified.

Demolition of concrete surfaces in ground floor and paving n.exc. 15cm thickness (below or above ground level) all as Specified.

Material and labour for providing plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring 25mm thick finished rough to reiceve toping complete all as specified and as directed.

Material and labour for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, paving including finishing the surface even and fair complete all as specified and as directed.

Material and labour for light shade vitrified ceramic tiles 10 mm thick area of each tiles not exc 0.36 sqm but n. exc 0.42 Sqm, of any shade and any pattern (Pattern consists combination of two or more tiles ) as in floor etc jointed in neat cement slurry and pointed in colored cement to match colour tiles over and including 15mm thick screed bed in CM 1:6 and pointed in colored cement to match coloured tiles.(The Colour,shade and pattern shall be approved by the GE during execution work). NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.

All as per item No.34 above but in vertical surfaces like skiting / dado etc all as specified and directed.(The Colour,shade and pattern shall be approved by the GE during execution work). NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.

Material and labour for Non skid coloured glazed ceramic tiles of any shade and any pattern of sixe (Pattern consists combination of two or more tiles ) 400 x 400 x 7 to 8-10mm thick, over and including 15mm thick screed bed in CM 1:6 as in floors etc. jointed in neat cement slurry and pointed in colored cement to match coloured tiles..(The Colour,shade and pattern shall be approved by the GE during execution work). NOTE: No extra cost sahll be allowed for Removing and re-fixing and necessary cutting of door etc if any required during execution of work.

Material and labour for glazed ceramic Coloured tiles in vertical surface 450x350x7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles over and including 10mm thick backing coat in CM 1:4 cmplete all as specified.

Demolition of cement concrete in ground floors and paving (reinforced) n exc. 15 cm. thicknesses, below or above ground level, complete all as specified.

Material and labour for preparation of new plastered/concrete surfaces of walls, providing one or more coats of Birla white wall care putty to achieve smooth surfaces and applying two coats of acrylic distemper of approved shade/tint over a coat of compatiable priming paint complete all as specified.

Material and labour for Preparation of new ceiling surfaces including washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of acrylic distemper on wall surfaces complete all as specified.

Material and labour for applying two coats of exterior grade emulsion weather coat over a coat of primer including Preparation of newly plastered surfaces complete all as specified and as directed.

Material and labour for Preparation of old distempered and painted surfaces including washing, rubbing down and stopping by brooming down , scraping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wall surfaces complete all as specified and as directed.

Material and labour for preparation of existing treatment of old surface including brooming down , scrapping down smoke soot,mould, moss and efforescent salts and trading oil and grease spouts and cleaning with water on wall applying one coats of Acrylic emulsion (exterior weather coat) paint of any tint as approved complete all as specified and as directed.

Material and labour for Granite 18 mm thick of any type work (table rubbed and polished) in steps, treads jambs, pillars, window- cills, cooking platforms, other plateforms and like in over and including 10mm thick backing coat in CM 1:4 including pointing in white cement or colour cement (1:2) using marble dust with admixture of pigment to match with shade of granite( including moulding ect) complete all as specified and as directed.

Material and labour for rounding to edges of Granite slabs one edge, such as in steps cooking plateform, and other similar situation all as specified and as directed.

Schedule of Credit (Minus) Rs. 74605.00 NOTE: Bidder shall insert credit amount of Rs. 74605.00 as rate in Green field under Col-5.

VIJAY CONSTRUCTIONS

KDR CONSTRUCTION

K R JOSEPH AND SONS