Karnataka

Active

Works

Bridges/Culverts

Construction of Bridge at Ch.2.20 km of Harave Road Connecting Harave via Ramenahalli in Hunsur Taluk

Public Works Department

PWD Special Division Office Hunasuru | Karnataka

Amount: ₹96.3 LCloses: 7 Sept 2026

Timeline

Published24 Aug 2026
Closes7 Sept 2026
Bid Opening8 Sept 2026

Tender Value

₹96.3 L

EMD Value

₹1.9 L

Closing Date

7 Sept 2026, 9:30 pm

Tender Inviting Authority

Office Inviting Bids

Public Works Department

Contact Person

VENKATESHA G

Office Number

08222251955

Work Description

Construction of Bridge at Ch.2.20 km of Harave Road Connecting Harave via Harave Kalhall, Ramenahalli in Hunsur Taluk

Tender Information

Tender ID

PWD/2026-27/BR/WORK_INDENT35401/CALL-3

Reference Number

PWD/2026-27/BR/WORK_INDENT35401/CALL-3

Tender Type

Open

Product Category

Bridges/Culverts

Form of Contract

Two Tender Document System(Two Cover)

Location

PWD Special Division Office Hunasuru

Source Website

Subscribe to view

Documents Required

5 documents required · 5 mandatory

Technical Bid

RequiredAnnual Turnover Certificate along with UDIN NO for period of last 5 years-2021-22 to 2025-26

RequiredKPWD Registration Certificate Class-III and Above Civil Contractor

RequiredWork Done Certificate for Similar nature of work of rs.48.14 lakhs duly attested by the Officer Not below the rank of E.E. from the last 5years i.e, 2021-22 to 2025-26

RequiredBanker Certificate - Line of Credit in the prescribed form

RequiredIncome Tax Balance sheets and Annual Turnover Certificate issued by theCA with Membership No. with UDIN - 2021-22 to 2025-26

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of kppp portal due to internet connectivity issues and technical glitches at bidders end

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-)soon after contract has been issued to bidder.

Conditional tenders will not be accepted

The tenderer shall bear all costs associated with the preparation and submission of his tender, and the employer will in no case be responsible and liable for those costs.

The Tender processing fee shall not be refundable

Royalty on construction materials and other taxes will be deducted as per prevailing Govt orders

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter noPW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund.

All scanned documents to be uploaded shall be in original and the Executive Engineer reserves the right to verify the documents before approval.

The employer reserves the rights to Reject or accept any or all the tenders without assigning any reasons.

The intending contractors are requested to note that they should abide by the detailed instructions and conditions contained in the Standard Tender documents KW-3

In the case of the death of the contractor after executing the agreement /commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work

Contractor should carryout additional test required to test the suitability of materials

All safety precautions, warning signs, night illumination, reflectors,deployment of security guards has to be ensured so that no incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Formation levels and other data furnished are bare minimum the contractor should make all efforts to validate and to get additional data if required at his own cost

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

The contractors assessed available tender capacity will be calculated as per the clause 3.5 of STD tender document Attached

All the items in the tender include all lead, lifts, loading unloading, transportation, labour, hire charges of machinery curing for concrete works, cost and conveyance of all material and all other such incidental charges necessary for successful completionof works as per the detailed technical specification and direction of Engineer in charge of this work

All precautions should be taken by the contractor so that there are no damages to such public/ private properties

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client

Further particulars, if any, required by the Contractor can be had from the office of the Executive Engineer, Public works Department, Hunsur Division,Hunsur during office hours on all working days.

Contractor should adhere to HSE (Health Safety Environment) policy applicable for similar projects. Contractor to that extent should submit HSE document defining all the procedure including the policies before execution of the project

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost

The difference in cost deposited by the lowest successful tenderer (for unbalanced) along with the performance security will be released to the contractor 30 days after the completion of defects liability period

All the uploaded documents in e-portal should be got verified at the Division office within 3 working days from the stipulated date of opening of Technical Bid by producing the original documents at the Division office, failing which the tender is liable for rejection. No separate communication will be made in this regard.

The returns submitted to the I.T. along with the Profit and Loss account statement submitted to the I.T. Department should be uploaded for the financial turnover criteria as per tender document attested by Chartered accountant

The success-full contractor should complete the whole work with in 5months from the date of handing over of site (including rainy season)

The successful Tenderer shall deliver to the Employer a Security deposit in the prescribed form in the favour of the ExecutiveEngineer, PWD Division, Hunsur Division, Hunsur given below for an amount equivalent to 5% of the Contract price plus additional security for unbalanced tenders in accordance with the Conditions of Contract

Regarding Appealing aggrieved contractors may appeal to the prescribed (Appellant) authority within 15 days as per KTTPand appeal should be through e-proc only as per Govt.order No:pwd/572/CRM-2020(E) Bangalore DT.09-10-2020. The samewill not be considered if appeal through Letters

18-Percent GST shall be paid to the tendered amount separately

Contractors should be registered as KPWD Class 3 and above Civil Contractor

The defect liability period for this project shall be 2 Year

Rs 50,000.00 of the EMD should be paid through e-payment as specified in e-procurement portal and the remaining balance amount of EMD must be produced in the form of Bank Guarantee by uploading the scan copy of the Bank Guarantee. Theoriginal copy should be produced at the time of Technical Bid Opening

Bankers Certificate for the stipulated amount as per clause 3.3 (b) should be submitted in the format as prescribed in the biddocument only. Otherwise tender is liable for rejection.

The quantities for the necessary deviation road and cofferdam are provided on a one-time basis in the BOQ and any additional quantities required for completion of the work shall be deemed included in the Contractors rates no extra payment shall be admissible, and such works shall be executed at the Contractors own cost and risk

Technical Criteria

General

Tenderer or his identified Sub Contractor should possess valid Electrical License for executing building electrificatio works and should have executed similar electrical works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Tenderer or his identified Sub Contractor should possess valid license for executing water supply / sanitary engineering works and should have executed similar works totallng Rs. xxxxxx (not less than 50% of electrical works) n any one year

Owning the following key and critical equipment for this work (xxxx, xxxx, xxxx)

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of works for which tenders already submitted

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditor’s reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

List of Financial Resources with Certificates

Past Experience

To qualify for award of this contract, each Tenderer in his name should have in the lastfive years i.e. (2021-22 to 2025-26)Executed in any one year the following minimum quantities of work ( Earthwork excavation-746.85Cum, Subgrade/Embankment - 2925.45cum, GSB-153.60cum WMM-174.00cum, steel-18.21tonnes, RCC/PCC concrete-298.18cum)

Work Done Certificate

Capabilities of Vendor

Existing Commitments work details - B-Valueshould be furnished duly attested by the concerned Executive Engineer as per Standard TenderDocuments

Others -- Existing Commitments work details

To qualify for award of this contract,each Tenderer in his name should have in the last five years i.e. (2021-22 to2025-26)Satisfactorilycompleted (atleast 50%) as prime contractor at-least one such similar work such as Culverts/Bridges of value not less than Rs.48.14 lakhs (Workdone Certificate from not below the rank of an Executive Engineer or equivalent)

Work Done Certificate

Liquid assets and /or availability of credit facilities of no less than Rs. 29.00Lakhs

Line of Credit

Financial Status

Achieved in at least Two financial years an average financial turnover (in all classes of civil engineering construction works only) of Rs. 96.28 Lakhs

Audited CA Certificate of Annual Turnover

Banker Details for reference

Line of Credit

Fee & Financial Details

Tender Fee Amount

₹2,410

EMD Fee Amount

₹1.9 L

Important Dates

Last Activity

24 Aug 2026

Published

24 Aug 2026

Bid Opening

8 Sept 2026

Download Ends

3 Sept 2026

BOQ Preview

•

Construction of Bridge at Ch.2.20 km of Harave Road Connecting Harave via Harave Kalhall, Ramenahalli in Hunsur Taluk

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing rubble stone/boulder filling between or behind abutment/below apron including cost of all materials, labour, hand packing, finishing top surface & all necessary works as directed and complet...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications. (Batching Plant). Ref to MoRT&H : IRC - 2702 ---- All the ite...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Filler joint - Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement up...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...

•

Painting on concrete surface - Providing and applying 2 coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescence and apply...

•

Road Delineators - Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fit...

•

DEVIATION ROAD AND APPROACH ROAD RECONSTRUCTION

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

Scarifying the existing bituminous road surface to a depth of 50 mm and disposal of scarified material by Mechanical Means using Hydraulic excavator with in all lifts and lead. Ref to MoRT&H : IRC - 3...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Tack coat on Granular surface treated with primer - Providing and applying tack coat with RS1 Bituminous Emulsion using emulsion pressure distributor at the rate of 0.25 kg/m2 on Granular Surface. R...

•

ELECTRIC POLE and LINE SHIFFTING

•

RCC Pole - 9 Mtr Long, 145 Kg WL ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and convey...

•

Labour For RCC Pole ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of all m...

•

Spiral Earth Electrode ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of al...

•

Labour for Spiral Earth ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of a...

•

11 kV, Horizontal Cross Arm ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance ...

•

Labour for Horizontal Cross Arm ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveya...

•

11 kV, 45 kN Polymeric Insulator ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and convey...

•

11 kV, 5 KN Composite/Polymeric Pin Insulator (24 mm Dia FRP Rod) ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring fo...

•

LT 4 Pin Cross Arm GI ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of all...

•

Labour for 4 Pin Cross Arm ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance o...

•

1.1 kV Polymeric Pin Insulator ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyan...

•

No. 8 Strain Insulator ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of al...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete...

•

Labour for Guy Set (CDS-1)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance ...

•

HT ST Support 50x8 mm Flat - GI

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conve...

•

GOS Set 200 Amps Single break ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyanc...

•

Labour for GOS Set ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of all ma...

•

H-Frame for mounting GOS (CDS-15)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and con...

•

Labour for H-Frame (CDS-15)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyanc...

•

Rabbit ACSR (6/3.35 mm Al+1/3.35 mm St), Std Wt: 214 Kg/KM ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concr...

•

Labour ACSR ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance of all material ...

•

Weasel ACSR(6/2.59 mm Al + 1/2.59 mm St), Std Wt: 128 Kg/KM ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for conc...

•

Supplying, fixing, wiring, earth electrode for grounding conduits, I.C. cutouts and other equipment's on the meter board using 40 mm dia 2.90 mm thick GI pipe 2.5m long buried in a pit . The pit shoul...

•

GI/Copper strips for grounding connections, using necessary fixing materials as required.25 x 6 mm GI strip ---- All the items in the tender include all lead,lifts, loading unloading, transportation, ...

•

Releasing & Refixing of RCC/PSCC Pole of 9 to 10 Mtr long in a pit of 1.8 Mtr depth ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of ...

•

Releasing & Refixing of V-Shape/Horizontal cross arm for DC Line including Brace and Insulator fixing. (Without Single Top Support ---- All the items in the tender include all lead,lifts, loading unlo...

•

Releasing & Refixing of 4 Pin cross arm with Insulator and Braces fixing ---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycu...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Rabbit ---- All the items in the tender include all lead,lifts, loading unloading, transportation, l...

•

Releasing and Restringing of Conductor (including pin binding, providing jumps, dead ending, etc.,) Weasel ---- All the items in the tender include all lead,lifts, loading unloading, transportation, l...

•

Releasing & Refixing of GOS Set(1104*1.9)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost ...

•

Releasing & Refixing of Labour for H-Frame (CDS-15) (323*1.9)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for c...

•

Construction of Bridge at Ch.2.20 km of Harave Road Connecting Harave via Ramenahalli in Hunsur Taluk

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut ...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per design in Single Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class bedding...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Granular Sub-Base - Plant Mix Method - Construction of Granular Sub-Base of required grading as per design mixing in a mechanical mix plant at OMC, carriage of mixed Material...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and laying in position Cement Concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The granite...

•

Prime Coat over WMM/WBM - Providing and applying primer coat with SS1 grade Bitumen Emulsion on prepared surface of granular base including cleaning of road surface and spraying ...

•

Bituminous Macadam Grading - II for traffic <20 MSA - Providing and laying Bituminous Macadam with 40/60 TPH capacity hot mix plant using crushed aggregates of specified grading prem...

•

Semi Dense Bituminous Concrete - Providing and laying Semi Dense Bituminous Concrete with 40/60 TPH capacity hot mix plant batch type using crushed aggregates of specified grading pre...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Construction of Subgrade and Earthen Shoulders - Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface - Providing and laying of hot applied thermoplastic compound 2.5 mm thick including ref...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

Supplying and Fixing of Molded Shank Raised Pavement Markers / Cats Eye made of polycarbonate and ABS moulded body and reflective panels with micro prismatic lens capable of providing total int...

•

Retro-Reflectorised Traffic Signs - Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC:67:2022 made of Class C Type XI ret...

•

Back filling behind abutment, wing wall and return wall complete including compaction as per drawing and Technical Specification - Granular material. Ref to MoRT&H : IRC - 710.1...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Metal Beam Crash Barrier - Type - A, W : Metal Beam Crash Barrier - Providing and erecting a W metal beam crash barrier system comprising of 3 mm thick corrugated sheet metal beam rail, 70 cm...

•

Guy Set Complete with No. 15 Strain Insulator ((CDS-1)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete...

•

Labour for Guy Set (CDS-1)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyance ...

•

HT ST Support 50x8 mm Flat - GI

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conve...

•

H-Frame for mounting GOS (CDS-15)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and con...

•

Labour for H-Frame (CDS-15)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for concrete works, cost and conveyanc...

•

Releasing & Refixing of Labour for H-Frame (CDS-15) (323*1.9)

•

---- All the items in the tender include all lead,lifts, loading unloading, transportation, labour, hire charges of machinerycuring for c...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

Kw 3-120 L CALL-3.doc

Tender Document • 1.08 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].