REPAIR TO ROAD, PATH AND ROAD FURNITURE AT ZONE-1, 1B, 1C, ZONE-2, ZONE-3 AND ZONE-5 AT SAA UNDER GE (S) TEZPUR

Dismantling Reinforced Cement Concrete of any description and in any Position not otherwise specifically provided for incl rubbish off the premises complete all as specified and as directed.

M&L for Pre cast RCC (1:2:4) type B1 using 20 mm graded stone aggregates for cover slab of drain, manhole/soak pit etc set in cement mortar 1:4 complete all as specified and as directed by Engr-in-Charge.

S&F TMT Bars 10 mm dia and over, cut to length, bent to shape required including crank-ing, bending and binding with and including Mild Steel Wire (annealed) not less than 0.90 mm, complete all as specified and as directed.

Demolition of Cement Concrete (un-reinforced) in Ground Floors and Pavings not exc. 150mm thickness (above or below Ground Level) incl rubbish off the premises complete all as specified and as directed.

M&L for Plain Cement Concrete type D2 (1:4:8) using 40 mm graded stone aggregate as in Foundation, Filling and Mass Concrete, complete all as specified and as directed.

Dismantling of stone slabs and tiles laid,bedded and pointed in any mortar of any description or thickness in floors, aprons etc incl rubbish off the premises all as directed by Engineer-in-charge.

M&L for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour,design & pattern as in footparth, parks,lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, complete all as spcified and directed.

M&L for Providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks over compacted sand bedding layer, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete.

Laying only using old paver paver block obtained from Item No 6 above at site compacted bed of coarse sand including sand and applying water proof paint , filling the joints with fine sand finishing and sweeping extra sand; complete all as specified and directed.

M&L for Plain Cement Concrete type B-1, (1:2:4) (20mm graded crushed stone aggregate) as in Coping bed plate,hold fast etc,block benching,channeling slightly rounded or chamfered angle and throating including form work and finishing all exposed faces of cement concrete complete all as specified and as directed.