WBPWD/EE/N24/EL/e-NIQ217/24-25

Amount

Supplying & fixing sheet metal (16 SWG) Iron Clad Busbar chambers on angle iron frame on wall, incl. earthing attachment and painting as required – ( As per Drawing no. 470 of PWD Specification Book – May 1991)-4 no Cu-bar 415 V, 200 A Dimension of Cu. bars [85mm long]-4 x 20x5mm

Supplying and fixing 63A, 415V, TPN SFU with sheet steel enclosure on flat iron frame on wal with nuts bolts etc incl. S & F 3 nos. DIN type HRC fuse as per rating. (L&T/Siemens/ABB) ( For outgoing to Ground Floor ).

Supplying and fixing 63A,415V FP Changeover switch with Sheet Steel enclosure on angle iron frame on wall with nuts bolts etc.(Havells/HPL/L&T)

Supply & laying FR-LSH 35 sq.mm. single core flexible copper wire (Make: Finolex/Polycab /RR) in suitable size PVC pipe including Copper Socket o Both End (reinforced) on wall from WBDCL Meter to 125A Cut-Out Kit kat Fuse .

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex /Polycab/RR) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish [Average run 9 mtr]

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Finolex/Polycab/RR) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan/call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish (On board )

Supply and delivery of Single LED Fitting (20Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 1 nos LED Tube.[Make: Philips(TMC 502 1xT-LED 22W,Mas LEDTube 1200mm 18W865 T8 I – 2100lm) or Wipro].

Supply and delivery of Twin LED Fitting (20Watt, 230VAC, 50hZ, 4000K NW, THD<10%, bult in 2.5KV SPD) with all accessories and 2 nos LED Tube. [Make: Philips,(TMC 502 2xT-LED 22W,Mas LEDTube 1200mm 18W865 T8 I – 2100lm) or Wipro].

Fixing only single/twin fluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports fixed with “L” type MS clamp whose one side fixed on ceiling with sutable size 4 nos. fastener and other side connected with the conduit with suitable size of bolts and nuts incl. S&F EI conduit, “L” type (125mmx125mm) 6mm thick and 25mm with MS clamps and connecting the length of PVC insulated wire and mending good damages to original finish and painting etc. by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length, as per GS.

Supply & delivery of 1200mm sweep 230V AC Ceiling fan incl. Blades, canopy etc. with 18" down rod (14SWG), Fork (10SWG), Heavy type insulator, 3/8th inch bolt with nut, heavy type split pin etc., as directed by EIC with complete accessories. [Crompton HS/Orient New Breeze].

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire, as per GS.

Supply & Fixing Socket type fan regulator (Step type) (Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.

Supply and delivery of 230V 30cm (12") 1420 r.p.m. metal body Exhaust fan with all necessary accessories, as directed by EIC. [Make: EPC Heavy Duty]

Fixing only 12" exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.

Supply & Fixing Aluminium louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) a) 30cm(12")

Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S&F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground, as per GS.

Excavation of soil for installation of Earth Electrode and filling & ramming, for Soft Soil, as per GS.

Extra for providing masonry enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below ground level) complete with cemented brick work (1:6) of 25 cm duly plastered with cement mortar cover of size hinged inspection cover of size 36.56 cm x 35.56 with locking arrangement GI reducer including drilling of 46 nos 12 mm dia hole on GI Pipe

S&F earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as reqd., as per GS.

Connecting the equipments to earth busbar including S&F 2x10SWG GI (Hot Dip) wire on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as reqd. & mending good damages as per GS.

SITC of 30 kVA Diesel Generator : Supply, Instalation ,Testing and Commisioning at site of 30 KVA, 415V, 50Hz, 3Phase silent new DG Set, comprising of Engine, alternator, integrated AMF panel, Base frame, Fuel tank, Battery, CPCB-IV+ approved Engine & Acoustic Enclosureincl. Brick foundation, exhaust system with insulation, earthing arrangement, canopy, control cable etc. having following specifications. ENGINE Make Cummins(Jakson)/Kirloskar) Engine Type : 4 Stroke Diesel Engine, RPM 1500 Rated Output: 42 BHP or Higher,Duty: PRIME Cooling : Liquid cooled with radiator Cylinder: 3 Aspiration : Turbo Charged Type of Govemer : Electronic Fuel Tank Capacity Minimum capacity 70Ltr as per manufacturer's standard Ltrs. Fuel Consumption at 75% rated Load with Radiator or Fan: As per Manufacturer's standard 5.8Ltr/ Hr. or Less Fuel Consumption at 100% rated Load with Radiator or Fan : As per Manufacturer's standard 7.6 Lt/ Hr or Less Overload Capacity: 10% overload for one hour for every 12 hours continuous running at full load or better 1.14.Engine instrument Panel : Consisting of starting switch with Key. Lube Oil Indicator, water temperature Indicator, RPM indicator and hour meter. Safety Controls Emergency Stop. Low Lube Oil Pressure warning Shutdown, High Engine Water Temp. warning (Shutdown, Sensor failure Indicator, Engine over speed indicator Battery charging and low battery indicator Exhaust Silencer Residential Type Starting system: 12V starting system complete with starter motor, charging alternator with rectifier and Cutout as per manufacturer standard Battery Lead Acid, Low Maintenance or SMF and conforming to relevant IS Specification with Low/High Battery Voltage and Weak Battery warning.

ACOUSTIC ENCLOSURE The DG set should have integrated acoustic enclosure at the manufacturing state itself. High quality acoustict enclosure must be certified as per CPCB-II norms. BASE FRAME Common iron channel fabricated base frame containing the engine and alternator, mounted on AVM pads and having provision for lifting HookType ) Rate should be quoted inclusive of all applicable taxes and Duty etc (li) All materials, equipments & accessories must conform to relevant IS /IEC specifications. The DG Set to be supplied must be from the authorized OEM of the respective Engine Manufacturer m) Necessary manufacturer's test certificate for Diesel Engine, alternator etc. Will have to submit in triplicate copy during delivery of the equipment iv) Copy of "Type Approval Certificate" and Certificate of Op must be produced at the time of delivery issued from competent Authority (As per CPCB-II). (v) Circuit Diagram for AMF Panel must be submitted from thel stars Manufacturer / OEM. (v) The entire set must be warranted at least 15 months from the Iate of Delivery/12 months/ 5000 Hrs from the date off Commissioning whichever is earlier. However Engine & Alternator should be warranted of 2 years/5000 Hrs, whichever is earlier.

Supply & Delivery of 4 core 35sqmm 1.1kV grade XLPE A/Al armoured cable (From AMF of DG to Main Switch) (Make- RR/Polycab/Gloster)

Laying of two cables 4 core 35sqmm in an underground trench in single tier formation (horizontal), the trench size : 680 mm x 760 mm average depth, with brick protection on the top of each cable 8 (eight) Nos. bricks per Mtr. and 4 (four) Nos. bricks per Mtr. as separator between the bricks and cables and also trench to be filled up with shifted soil, levelling up and restoring surface duly rammed.

Laying of cable 4 core 35 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 2 x 10 SWG GI (Hot Dip) Wire, making holes etc. as necy., mending good damages and painting.

S&F and fixing compression type gland complete with brassgland, brass ring & rubber ring for dust & moisture-proof entry of 4C 35 sqmm XLPE/PVC armoured cables, as per GS.

Finishing of 4 core 35 sqmm XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc., as per GS.

Supplying & fixing 40 mm medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required

S & delivery of 50 Liters. Capacity heavy gauge MS barrel. as per direction of EIC

S/D of Diesel oil for commissioning of 25KVA DG Set.

SKS PROJECTS (BID ID -5967194)

TECHNO FAITH (BID ID -5966112)