PROVN OF JAFFERY WAL AROUND P-96 AND P-97 AND CERTAIN B/R WORKS, CERTAIN SPECIAL REPAIR WORKS AT HQ SWAC VSN CHILODA AND MINOR WORK AT SECTOR - 25 GANDHINAGAR UNDER GE (AF) CHILODA

Amount

Excavation in trenches not exc 1.5m wide and n. exc 1.5m in depth, for foundation, etc. or for shafts, wells, cesspits, manhole, pier holes, etc. n exc 10 Sqm on plan and n exc 1.5m in depth and getting out in Soft / loss soil complete all as specified and as directed.

Removing excavated material n exc 50m and depositing where directed at a level n exc 1.5m above the starting point complete all as specified and as directed.

Returning filling in, including spreading, levelling, watering and well ramming in layers not exc 25cm in hadr/dense soil complete all as specified and as directed.

M&L for plain cement concrete type D-2 1:4:8 (using 40mm graded aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and as directed.

M&L for rendering 10mm thick on fair faces of concrete block masonry in cement concrete 1:4 and finished fair and even complete all as specified and as directed.

M&L for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in beams complete all as specified and as directed.

M&L for formwork to sides and soffits of floor or roof beams beam haunchings, girders bressumers cantilevers complete all as specified and as directed.

S&F for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia complete all as specified and as directed.

All as per item No 9 here in before but 6mm to 8mm dia (as in stirrups).

M&L for preparation of new or prevously untreated plastered surfaces of walls and applying two coats of cement base paint, complete all as specified and directed.

M&L for Providig precast cement concrete (type B-0, 1:2:4 using 12.5mm graded aggregate) louvers and jallies, 25mm thick (measured solid), including all mouldings but excluding frame, set in cement mortar 1:4, complete all as specified and as directed.

S&F semi/fully perforated acoustic ceiling, Calcium silicateat at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of Size 595x595 mm consisting the thickness of 10-12mm of approved texture, design and patterns having moisture content less than 2%, Rh of 99%, NRC 0.60 to 0.75, Non- combustible as per IS: 1734 static bending of 4.7 N/mm2 and compressive strength of 7.6 N/mm2 AS PER is 2380 ( Part-8) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.28mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 24x32 mm of length 3000 mm, cross - T of size 24x26 mm of length 600 mm and secondary intermediate cross-T of size 24x26 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items i.e. 50 mm long, 8 mm outer diameter M-6 dash fastener hanged by 16 gauge Galvanized/ S.S. wire at the distance of 600mm between each. Galvanized iron perimeter wall angle of size 24x24x0.30 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall metal wood grip screws on which Glasswool mats of 24 density and 50mm thickness to be laid. The work shall be carried out as per specifications, drawing and as per directions of Engineer-in-Charge.

S&F 2 Track Two Shutter panels sliding window with - Two Sash glazed made of frame 40x45mm, Glaze sash 27x65mm both having wall thickness of 1.4 ± 0.2mm and DGU Glass double glazing bead of appropriate dimension complete all as specified and as directed.

S&F Casement glazed door comprising of Aluminium with multi- chambered frame 1 Glass Door Shutter with DGU Glass 5mm Clear Toughened + 10mm Air Gap + 5mm Clear Toughened(where ever required) extruded profiles glazing beads of appropriate dimension, EPDM gasket, zinc alloy (Black powder coated) Butthinges and one handle on each side of panels along with zinc plated mild steel multi point locking having, cylinder with keeps and one side key, G.I fasteners 80x8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawings. Casement door with Butthinges made of (big series) Frame 40x40mm & Glass Door sash 70x40 mm all having wall thickness of 1.5 ± 0.2 mm and double glazing bead of appropriate dimension with mortize lock with L type Handle and cylinder lock with Key and as per directions of Engineer in-charge.

S&F Acoustic fully perforated panels, wall panel 595mm x 595mm having thickness of 12mm having moisture content less than 2%, humidity resistance of 99%, NRC from 0.60 to 0.75 having compressive strength of 7.6 N/sqmm and static bending sytrenth of 4.7 N/sqmm includes along with 18mm thick 75 mm width of pattas as main runner, screw fixed to brick wall/partition with the help of Nylon sleeves and screws at 610mm centres. Then suspending G.I. intermediate channels of size 45mm (0.9mm thick with 2 flanges of 15mm each) from the soffit at 1220mm centres with ceiling angle of width 25mm X 10mm X 0.55mm thick fixed to soffit with G.I. cleat and steel expansion fasteners. Ceiling section of0.55mm thick having knurled web of 51.5mm and 2 flanges of 26mm each with lips of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and indirection perpendicular to the intermediate channel at 450 mm centres on which Glasswool mats of 24 density and 50mm thickness to be laid. premium grade superfine gypsum powder. The work shall be carried out as per specifications, drawing and as per directions of Engineer in-charge.

M&L after fill the joints followed by primer coat, finishing, scrapping and 2 coats of plastic water- soulble plastic paint for asthetic look and longer durability and as per directions of Engineer in-charge.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size exc 1.5 Sqm & n.exc 4.00 Sqm each complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from frames) size n exc 1.5 Sqm each complete all as specified and as directed.

Taking down shutters of any description n exc 1sq. m each complete all as specified and as directed.

Taking down shutters of any description exc 1sq. m but n exc 2.00 sqm each complete all as specified and as directed.

S&F 35mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 25mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 35mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, but divided into squares, with plain,chamfered or rounded,mitred and rebated sash bars,any numbers sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and as directed.

S&F Factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC Sheet rainforced with MS square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S&F pressed steel frames of size 125mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, filling/ packed with PCC 1:3:6, back side all around frame complete all as specified and as directed.

S&F 100mm long butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and as directed.

S&F 75mm long butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin anodised type C-21 complete all as specified and as directed.

S&F aluminium extruded alloy handles fabricated type anodised of size 150mm complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of size 150mm long extruded section complete all as specified and as directed.

S&F aluminium anodised barrel tower bolt of size 200mm long extruded section complete all as specified and as directed.

S&F 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and directed.

S&F in repair 300mm size mild steel ordinary rat tail, rod pattern springs including roller and roller plate complete all as specified and as directed.

S&F 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and as directed.

S&F in repairs 150mm floor door stopper of aluminium alloy powder coated with hard drawn steel spring complete all as specified and as directed.

S&F 300 mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections complete all as specified and as directed.

S&F stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts complete all as specified and as directed.

S&F in repair stainless steel wire cloth 0.50mm nominal dia of wire and average width of apertujre 1.18m fixed with MS screw and bolts complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Taking down cement plaster of any description including racking out joints, hacking for key and disposing of debris out side MOD Land complete all as specified and as directed.

M&L for 10 mm thick rendering in CM 1:6 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on concrete surfaces / fair faces of brick masonary wall, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for new plastered surfaces of wall and applying two coats of oil bound distemper over chalk whiting on plastered surfaces preparotory to distempering including preparation complete all as specified and as directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) P or S type (excluding fixing bolts, flushing cistern and flush pipe) incl seat cover white closed pattern with flat bottom etc complete all as specified and as directed.

S&F in repair vitreous China squatting pan, orissa pattern of size 580mm x 440mm, white with integral foot rest incl connection to trap & flushing pipe complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect complete all as specified and as directed.

S&F in repair 10 litres capacity PVC valveless symphonic action type, flushing cistern, low level, white, with inlet, ball valve float handle including brackets complete all as specified and as directed.

S&F in repair Pillar taps, cast copper alloy, with capstan heads, chromium platedscrewed down highpressure, with orwithout lettered 'Hot' or 'Cold' withlong screwedshanks and fly-nuts,screwed for iron pipe and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repair Bib taps, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repair stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed to 15mm bore pipe complete all as specified and as directed.

S&F in repair 15 mm size brass chromium plated shower rose 125 mm dia with or without / swivel joints, fixed in position complete all as specified and as directed.

S&F in repair vitreous china white wash hand basin 550 mm x 450 mm including all necessary fitting such as 15 mm CP pillar cock, CP waste coupling 32mm dia, PVC waste pipe and brackets including supply and grouting 6 to 8 mm dia GI racket bolt at the back side of WHB and making good existing surfaces, including taking down old wash hand basin complete all as specified and as directed.

S&F in repair plastic water closet seat cover, white or black colour closed pattern with flat bottom complete all as specified and as directed.

Dismantling of cast iron/ PVC or reinforced concrete drain pipe of 75 to 110mm dia of any description incl high rise bldgs etc complete all as specified and as directed.

S&F cast iron soil waste and vent pipe 75mm bore sand cast pipes with or without ears fixed to walls complete all as specified and as directed.

S&F cast iron soil waste and vent pipe 100mm bore sand cast pipes with or without ears fixed to walls complete all as specified and as directed.

Extra over cast iron pipes and fittings for providing lead joints in lieu of cement joints for 75mm dia bore complete all as specified and as directed.

Extra over cast iron pipes and fittings for providing lead joints in lieu of cement joints for 100mm dia bore complete all as specified and as directed.

S&F CI cover for oval access door for 75mm dia pipe with bolts complete all as specified and as directed.

S&F CI cover for oval access door for 100mm dia pipe with bolts complete all as specified and as directed.

S&F PVC 110 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC 75 mm bore Rainwater drainage pipes , waste, soil ,(SWR) PVC SWR pipes single socketed in any length with rubber ring joints fixed to wall of any height etc complete all as specified and directed.

S&F PVC (SWR) bends 110mm bore etc complete all as specified and directed.

S&F PVC (SWR) bends 75mm bore etc complete all as specified and directed.

S&F PVC 100mm bore (SWR) coupler etc complete all as specified and directed.

S&F PVC 75mm bore (SWR) coupler complete all as specified and directed.

S&F 75mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F 100mm cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair 20 mm dia decorative aluminium anodised tubular curtain rod including both side finals with powder coated complete all as specified and as directed.

Hacking out old broken glass of any thickness, size, quality or description from metal frame including punching or drilling out old glazing pins/spring clips etc complete all as specified and as directed.

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty/wooden lepping in square not exc 0.50 Sqm each in each pane complete all as specified and as directed.

Demolition of stone slabs & tiles of any thickness & in any position laid, bedded and pointed in any mortar otherwise specified complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) complete all as specified and as directed.

M&L for Glazed ceramic coloured tiles in vertical surface 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat of 10mm thick in CM (1:4) all as specified and directed.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including screed bed 15mm thick in CM (1:6) complete all as specified and as directed.

M&L for Machine cut kota stone slab flooring 18-20mm thick over 20mm thick cement screed base in cM 1:6 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab complete all as specified and as directed.

M&L for Machine cut kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over 15mm thick backing tiles laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

M&L for preparation of old surfaces of wall and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying two coats of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old surfaces of walls and applying a coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparation of old wood surfaces of any description, not otherwise descri-bed, over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description over 10cm width or girth not otherwise described and applying one coats of synthetic enamel paint complete all as specified and as directed.

M&L for complete removal of existing surfaces including preparation of wall and applying two coats of acrylic emulsion (weather coat) paint over a coat of one coat of primer by using roller brush complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of old surfaces of wall and applying two coats of acrylic emulsion (weather coat) paint using roller brush complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying two coats of acrylic emulsion (weather coat) paint over a coat of primer by using roller brush complete all as specified and as directed by Engr-in-Charge.

Dismantling and removing of existing sunken floor of WC of any thickness with 15mm thick plastering in CM 1:3 of internal surfaces with ceiling compound/WPC @ 3% and filling with PCC/ Lime concrete 1:2:4 type B1 using 20mm graded stone aggregate with inserting 50mm bore GI water pipe light grade spout and applying pidilite 20 micron endura atul (crack powder, endura B-30, Flast Flex , Microsil 30C, Epoxy lacrete) (NOTE : WC & Tiles shall be measured and paid separately) complete all as specified and as directed.

Demolition Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 25mm thick cement concrete type B-1,1:2:4 (20mm graded aggregate) as in level course complete all as specified and as directed.

M&L for 75 mm thick PCC ( 1:3:6) type C-2,(20mm graded aggregate) as in plinth protection incl joint filling etc complete all as specified and as directed.

Dismantling water tanks exc 250 ltrs but n exc 500 ltrs capacity and removing to store complete all as specified and as directed.

Dismantling water tanks exc 500 Ltrs but n exc 1000 ltrs capacity and removing to store complete all as specified and as directed.

S&F 500 Ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

S&F 1000 Ltrs capacity double layer, rotational molded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position over existing PCC platform including all fitting such as connection pipe pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20mm ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed.

M&L for ATT Along the internal and external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes minimum 300mm depth @ 300mm c/c etc in apron complete all as specified and as directed.

M&L for ATT points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as specified and as directed.

Taking up or down 15mm steel tubing and connections,including cleaning for refixing complete all as specified and as directed.

M&L for 15mm GI Tubes, 'medium grade galvanised,with all fitting fixing on wall complete all as specified and as directed.

M & L 18/19mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice lamination , fixed in repairs with screws to timber frame work complete all as specified and as directed by Engr-In-Charge.

M & L for 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed to kitchen cabinet shutter of dimension as required, complete all as specified and as directed by Engr-In-Charge.

S & F for auto closing hydrolic Hinges complete all as specified and as directed by Engr-In-Charge.

S & F in reapirs Magnetic catches ( Size not exc. 50 mm x 15mm, complete all as specified and as directed.

S & F Mild steel chromium plated handle 125 mm size for built in steel/Wooden cupboard complete all as specified and as directed by Engr-In-Charge.

M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 complete all as specified and as directed by Engr-In-Charge.

M & L for PVC lipping all around Prelaminated particle board of width n exc. 18/19 mm fixed with glueing together complete all as specified and as directed by Engr-In-Charge.

S & F Anchor and fastners size dia 10 mm, length 100 mm as complete all as specified and as directed.

Shree Builders

TECH SERVE SOLUTIONS

Haritwal traders

Ramdev and Sons

DMA PROJECTS

ALBA AC AND REF SERVICES

divyarsh entrprise

Sharnamsingh and Co

ARTI CONSTRUCTION