Replacement of rusted/damaged meter panel, faulty staircase lighting, cables, electrical maintenance work at flat no. 08 and other allied works at staff quarter (Gwyer Hall and PG Mens hostel), University of Delhi

Supply, Installation, testing and commissioning of pre-wired, single box fitting with one no. LED tube of frosted cover design, 18 Watt, 2100 lm, 50000 burning hours, size 1200 mm complete i/c all accessories etc. directly on ceiling/wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. fitting equivalent to Philips Make, Cat No. TMC 502 1xT-LED 22W, Tube equivalent to Philips Make, Cat No. Mas LEDTube 1200mm 18W 865 T8I-2100 lm.

Supply, Installation, testing and commissioning of pre-wired, wall mounted fancy white light, suitable for installation of LED bulb, 220-240 V, 50 Hz complete i/c all accessories but without bulb etc. including connection, etc. complete as required. Make Philips, Cat No. Cat No. Comet wall fancy light B22 or equivalent model of Thorn/Trilux

Supply, Installation, testing and commissioning of 12 watt, ceiling circular light for domestic grade, surge protection upto 3 kV & wide voltage protection 160-360 V, 50 Hz complete i/c all accessories etc. directly on surface including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor cable and earthing etc. as required. Make philips, Cat No. Full Glow 12W, WW/NW/CDL or equivalent model of Thorn/Trilux

Supplying of one number PVC insulated and PVC sheathed / XLPE aluminium conductor armoured power cable of 1.1 KV grade of size 4C x 16 sqmm etc as required.

Supply and fixing of street light pole box of size (250 X 200 X 100) complete with all necessary accessories including suitable clamps, bakelite sheet, brass screws, washers, and 01 no. 10 Amps SP MCB (Single Pole Miniature Circuit Breaker), inclusive of making electrical connections, as required at site.

Supply, erection, Testing and comissioning of hot dip galvanized octagonal steel pole of 5 Metre height made out of 3mm thick sheet PCD 200 mm, having bottom 130mm A/F & top 70mm A/F with built in connector box of size 500 mm length, M.S. base plate of size 200mm x 200mm x12mm thick to accommodate the fitting on existing RCC foundation including Supply and fixing of 4 Nos. M-16 x 450mm long J Type (EN-8 grade) G.I. foundation bolts, 12 Nos. of Nut, 4 Nos. of washer along with suitable size templates, making connections, interconnections with suitable size of copper wire with timble/lugs in the connection box, earthing, making numbering of pole etc. complete as per drawing & technical specifications attached including following accessories mounted on inbuilt control box having flush cover with 2 Nos mounting strips with tapped holes (a) 6mm thick phjenolic laminated sheet/ bakelite sheet inside the window mounted on the existing mounting strips inside the flush door (b) Supply and fixing of Teriminal block suitable for 16 sq. mm conductor 4 Nos. & shorting links - 5 Nos. on DIN Chneels (c) Terminal suitable for 6 SWG GI Wire/ 1.5 sq. mm wire (d) 6 Amp SPMCB 10 KA 'C' Series - 1 No. including mounting on DIN Channel This includes making of founation of size 1200 mm x 400 mm x 400 mm made of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) with proision of IN and OUT slot for cable entry including excavation and refilling etc. as required. (Make : Bajaj/ Transrail/Jindal/Tata)

Supply, Installation, testing and commissioning of pre-wired, 150 watt, flood light Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP66 protection, 130lm/w, 220-240 V, 50 Hz on existig street light pole/wall including all accessories and connection etc.as required..Philips Make, Cat No. BVP 192 LED 177 CW NB FG A1 PSU GR or equivalent model of Thorn/Trilux

Supplying and Fixing of 500 mm long Over hang double arm bracket made of suitable dia G.I. pipe and suitable for 70 mm dia G I Pole including Nut bolts etc. as required. (Make : Bajaj/ Paruthi/ Surya)

Supply, erection, testing and commissioning of 415V, 3 phase 4 wire 50 Hz , Meter panel, IP 65 (outdoor type) fabricated CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade, having capacity extensible type DMC / SMC FP bus bars of high conductivity, DMC/ SMC bus bar supports , bottom base channel of MS section of suitable size, fabrication shall be done in transportable sections, entire panel shall have a common copper earth bar of size 25 mm x 5 mm at the rear with 2 Nos. earth stud, solid connections from main bus bar to switch gears with required size of bus bars etc. complete in all respect as per CPWD specification complete with necessary accessories, wiring with 2.5 sq. mm. FRLSH insulated copper conductor , cable alleys, cable gland and following incoming and outgoing switchgears with protection and metering etc.as required at site. All MCCBs above 63A should be provided with Spreader Terminals. Approval shall be taken for each panel before fabrication. Incomer 100A FP MCCB (25kA) with thermal magnetic based O/L & S/C protection -1 Nos., Incomer should be Suitable for cable termination. RYB on, off trip indication lamp-1 set., Multi-Function Meter with CT- 100/5A class-1.0 10 VA -03 nos. Busbar 150A TPN Al busbar Extensible type Outgoing : 1. 63A DP MCB (10kA) -6 Nos. 2. Space for single phase energy meter with lockable arrangement :- 06 Nos. Connecting terminal (Inside cable alley) of all MCB should be suitable for connection with Aluminium armoured cable upto size 16 sqmm.

Please Enable Macros to View BoQ information