Providing Brail Symbols, TacTile & Ramp For Handicap At Aadarsh Nivasi School (Kanya) Khedbrahma,Ta:- Khedbrahma, Dist.- Sabarkantha

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

1 Brick work using common burnt clay building 3.00 4245.09 Cum

bricks having crushing strength not less than

35 kg./Sq.Cm. infoundation and plinth in

Cement Mortar 1:5. (1- Cement : 5 -fine

sand) (B) Conventional

2 Providing 20mm thick cement plaster in 20.00 235.48 Sq.mt.

single coat on single or half brick walls for

interior plastering upto floor two level and

finished even and smooth in (i) Cement

mortar 1:3 (1cement:3-sand)

3 Providing and fixing machine cut, free edges, 7.00 2510.86 Sq.mt.

mirror polished Granite stone strips 18 mm

thick for Ramp/floor as per design

including full moulded round inside edge and

laid on 10 mm thick cement mortar 1:3 (

cement: 3 coarse sand) jointed with grey

cement slurry including rubbing and polishing

finishing etc. complete.

4 Providing and laying cement concrete 1:2:4 2.00 3757.61 Cum

(1- Cement : 2- Coarse sand : 4- graded

stone aggregates 20 mm nominal size) and

curing complete excluding cost of formwork

in (A) Foundation and Plinth

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

5 Providing and fixing Braille Signages made 25.00 1161.50 No.

of high-quality acrylic / stainless steel /

aluminium (as specified), with tactile raised

letters, symbols and Grade–1/Grade–2

Braille dots as per accessibility norms.

Signages to be of required size, thickness

and colour contrast, with smooth edges, non-

glare finish and universal symbols as per

ISO / IS standards. Signage to be fixed on

walls/doors at appropriate height using

approved adhesive or fasteners, complete as

directed by the Engineer-in-charge.

6 Providing and laying tactile paving (guiding 60.00 1262.50 Sq.mt.

and warning path) using precast concrete

tactile tiles of size 300 mm × 300 mm ×

25/30 mm thick (or as specified), conforming

to IS 13801 / accessibility standards for

persons with disabilities (PwD). Tiles shall

have raised patterns (truncated domes/lines)

with non-slip surface, in approved colour

contrast (generally yellow), laid on a 20 mm

thick cement mortar (1:4) bedding, joints

filled with cement slurry, including curing,

finishing and all materials, labour, and tools

complete as directed by the Engineer-in-

7 Providing and fixing 90 cm high Stainless 8.00 2878.50 Rmt

steel railing made from anticorrosive S S

pipe of 50 mm dia (16 Gauge) as hand rail

with S S 38 mm dia (16 Gauge) as a vertical

support fixed in RCC slab at 1.2m c/c

including three horizontal S S pipes of

mm dia (16 Gauge) at eqal distance fixed by

18.75 mm dia (16 Gauge) S S pipe including

accessories as per detailed drawing as

directed etc compl.

Description of Item

(with brief specification and reference to Quantity Rate In figures Unit Amount

book of specifications)

8 Providing and Supplying foldable manual 1.00 12877.50 No.

wheel chair for differently abled perons,

having MS tubular powder coated frame,

fixed armrest, footrest, rear wheel with hand

rim, front caster wheels, seat and backrest in

durable fabric, complete in all respects and

as directed by Engineer-in-Charge.

Total Rs.

Rupees One Lakh EightyThree Thousand Two Hundred TwentyNine and Paisa Eleven Only

I / We am / are willing to carry out the work at ________________________________% above / below

percent (should be written in figure and words) of the estimated rate mentioned above. Amount of my /

our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct_________% Below Add_________% Above

Net Rs.__________________ Net Rs.__________________

In words __________________ In words __________________

1 The Contractor shall exhibit a board with detailed specification and details of work as directed by

the Engineer-In-Charge for which no extra payment shall be made.

2 The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt.

G.R.: PRC-10/2017 Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in

R.C.C. items where there is a change as per actual mix design the cost of difference of cement

consumption have been deducted from the rate of original item at the rate of input rate mentioned

in all the tender.

Signature of Contractor

Deputy Executive Engineer Executive Engineer

R.& B. Sub Division R.& B. Division

Khedbrahma Himatnagar