GI Sheet Building

Hiring of Septic Tank Vehicle for suction, collection, transportation and disposal of sewage/septic tank waste, including vehicle, operator. pumping equipment, manpower and all incidental charges, complete an directed by the Engineer-in-Charge

Cutting open CC road surface with concrete saw cutter and removal with breaker

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m. dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/304 MORTH

Collection supply and filling of Stone crusher dust finer than 3mm with not more than 10% 4 passing 0.075 sieve including cost and conveyance of all materials, labour charges, watering and compacting etc complete as per ss under bed concrete

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications MORTH

Providing concrete for plain/reinforced concrete (M20) in open foundations using 20 mm nominal size Graded hard stone aggregate mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications MORTH

Supply and placing of the VRCC M-25 Grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, 8 incidental and labour charges such as weigh batching, machine mixing. laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering. laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. (BLD-CSTN-2-14) FOOTINGS

Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT)/Mild steel (MS) steel hars (Fe 415/ Fe 500 grade as per 15 1786-1979) of different diameters for RCC works including labour charges for straightening, cutting, bending to required sizes and shapes. placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps. couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors. APSS No. 126

Manufacture, supply, delivery and fixing of Heavy Steel works like Trusses, Stanchions, Heavy Beams and Girders made with MS Structural Steel, ie Angles, Channels & I Sections etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Supply and fixing of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating Alu-Zinc coating AZ150 GSM. Tensile Strength. 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width 1020, Length Maximum 12 Meters with Regular Range Colours 10 Sqm.

Brick Masonry in CM (1:6) with 2nd class Bricks traditional size 23 x 11 x 12 7 cms including cost of all materials and labour charges for curing and scaffolding charges etc.

Plastering with CM (1:4), 20 mm thick including cost & conveyance of all materials and labour charges curing etr complete

Plasteing with CM (1:4), 12 mm thick including Cost & Conveyance of all materials and labour charges for mixing and curing etc. Complete as per S.S

Supply and Fixing 66mm thick metal stud partition screw fixed to either side of 48mm studs of 0.55mm thick with 50mm floor and ceiling channel 0.55mmand the joints duly finished with joining compound, glass Fiber tape and two coats dry wall top coat as per specification finished Item of work using 8mm thick Calcium silicate boards

Providing and applying synthetic plaster putty or plaster of paris putty or lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust. applying knifing paste filler by putty knife / muslin pad, air dry for 2-3 hrs, sand with 180 and 320 No., emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls

Paunting new walls with 2 coats of plastic emulsion paint of approved brand and shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, inlcuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc complete for finished item of work as per SS 911 for Internal walls

Painting to new walls with 2 coats of plastic emulsion paint of approved brand and shade after chouroughly brushing the surface to remove all dirt and remains of loose powdered materials, 16 mlnuding cost and conveyance of all materials to work site and all operational, incidental, labour charges etc complete for finished item of work as per SS 911 for External walls.

Manufacture, supply, delivery and fixing of Window Grills, Compound wall grills, Iron Doors, Windows made with MS Structural Steel, ie Angles, Channels & I Sections etc including welding, finishing, applying red oxide paint as primary coat etc complete unit 1.00 kgs

Painting to new iron work with synthetic enamel paint two coats over pirmary coat with red oxide paint including cost and convevance of all materials and labour charges etc complete

Suapplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) sliding windows three track two glass shutters sliding and one mesh shutter duly manufactured using UPVC reinforced profiles of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.0 mm for outer frames. (58 mm x 39 mm)/(54 mm x 38 mm) x 2.0 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 12 mm prefabricated & welded through fusion welding the window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 215 mm) x 2 mm fitted with nylon/ polymer mesh on rollers/accessories like pulley duly fixed with TPV Gaskets/ EPDM weathering seal resistant locking system 1 No. per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant easy glazing/ deglazing at site etc and conveyance of all materials. accessories, labour charges erection at site with templates for casement sizing complete for finished item of work including cost for transportation, erection at site with templates for casement sizing complete for finishing item of work.

Flooring with vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab. including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement. sand water and tiles etc., complete, including seigniorage charges, etc.. complete for finished item of work, but excluding the cost of conveyance of all materials..

Providing skirting to internal walls to 15 cm height/risers of steps with vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work

Flooring with chequrred terrazzo tiles of 22 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, complete for finished item of work, but excluding the cost of conveyance of all materials.

Door Frame section of 45x75 MM The two Vertical members are to be joined together with the horizontal member using 8x50 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 No.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member.

Providing and fixing 28 30 MM thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame

Supply and fixing of aluminium fixed glazing as per drawing using standard powder coated/ anodised aluminimum section of 101.4 x 44.45 x 3.18 mm thick fitted with 6.0mm thick / 4.0 mm thick plain float glass 27 glazing fitted with suitable Aluminimum glazing clips and aproved brand silicon sealant including cost and conveyance of all Material Labour charges for manufacturing fixing in position using wooden blocks and sheet metal screw etc. to complete for finished item of work (BLD-CSTN-11-27)-1 No.

Supplying and fixing (Prince/Sudhakar/Kisan/Supreme or any ISI brand)6Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & of SWR PVC pipes contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)

Provision for Electrical Works, including necessary conduits, sleeves, openings, junction boxes, cable routes, supports, earthing provisions, and other requirements for future installation of electrical systems, complete as directed by the Engineer-in-Charge.