WELCOME MAINT INCLUDING CERTAIN BR WORKS IN MD ACCN UNDER ZONE B OF GE (A) AHMEDABAD

M&L for perparation of old decorated surface of walls (plastered/unplastered) including cornices, pilasters etc by brooming down or steel wire brushing, scraping down smoke, soot moulds, moass and effloroscent salts trading oil and greasy spots and applying one coat of white wash on walls all as speciied and directed

All as per item No 1 above but one coat of white wash on ceilings complete all as specified and directed

All as per item No 1 above but one coat of oil bound emulsion distemper on walls complete all as specified and directed

All as per iten No 01 above but one coat of cement base paint on walls complete all as specified and dircted.

M&L for complete removal of existing treatment and applying two coats of Oil Bound Distemper over and incl one coat of 3 mm thick wall care putty on wall.

M & L for preparation of old painted wooden : surfaces of any description postion and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) complete all as specified and directed

All as per item No 6.00 above but applying one coat of synthetic enamel paint (ordinary tint) on steel surfaces, complete all as specified and directed

Complete removal of existing treatment and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed.

Demolition of Brick work or stone/boulder masonry, build in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed

Taking down cement or lime plaster of any description from stone or brick walls etc including raking out joints, hacking for key scrubbing down with water and disposing off the rubbish complete all as specified or directed.

M&L for 15mm thick rendering on fair faces of brick/ concrete surfaces in CM (1:4) finished even and smooth without using extra cement complete all as specified and directed.

M&L for 10 mm thick rendering on surfaces other than fair faces of brick/concrete surfaces in CM (1:6) and finished even and smooth without using extra cement complete all as specified and directed

M & L for 10mm thick rendering on cement concrete as in ceiling with cement mortaar 1:3 complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of walls & applying two coats distemper oil- emulsion , white or tinted over a coat of primer surfaces of wall complete all as specified and directed.

M&L for preparation of new plastered surfaces on walls and applying two coats of cement based paint over one coat of Primer on walls complete all as specified and directed.

All as per item no 16 above but three coat of white wash on ceiling complete all as specified and directed

S & F in repair Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed

Repair of steel window shutter not exc 1 Sqm each by replacing projected type unserviceable hinges with welding new hinges or welded of existing broken hinges and handles to window frames easing of shutter top proper closing with oiling to hinges and painting at welded portion to match the existing surface complete all as specified and directed

Hacking out old broken glass (any thickness, size, quality or description) from wooden or metal frame including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

S&F 3mm thick frosted glass panes and glazing with oil putty & pins/spring pins complete in squares n.exc 0.50 sqm each panes complete all as specified and directed

S&F 4mm thick frosted/tinted glass panes and glazing with oil putty, pins/spring pins & aluminium beading for steel/aluminium window complete n.exc 0.50 sqm each panes complete all as specified and directed

S&F in repairs for 25 mm Stainless steel curtain rails with fixing brackets stops complete all as specified and directed

Taking down chowkats or frame with shutters (without taking off shutters from the frame) exc 1.5 sqm and n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames area not exc. 1.50 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down shutter of any description but exc 1 sqm and n. exc. 2 sqm each complete all as specified

Taking down shutters of any description not exceeding 1 Sqm complete all as specified adnd directed.

S&F mild steel angle Iron work as in doors or Gate or grill of angle of other section with gueset plates , rails brackets etc, complete, drilled for fixing of steel sheeting or other covering, Doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging dooe fittings (exclusive or steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing complete FE 290 (Gde-E-165) complete all as specified and directed

S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F 2nd hard wood 35mm thick glazed, and skeleton shutters open rebated & prepared to receive, glass, gauge etc. divided into squares with plain chamfered or rounded mitred and rebated any numbers and size of members of shutters as specifed in SSR Part I, Section 8, clause 8.24(a); supllied and fitted to chowkahts complete all as specified and directed.

S & F 100 mm long mild steel butt hinges, medium weight cold rolled complete all as specified and directed.

S&F 150 mm size aluminium anodised door handles complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section 200 mm size complete all as specified and directed.

S&F aluminium alloy anodised sliding door bolt with hasp and stapple ( bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section 300mm length & dia not less than 12mm with & including 6 Nos of bolts complete all as specified and directed.

Preparation of new or previously untreated wooden surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamal paint over a coat of pink primer complete all as specified.

S&F Solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supplied and fixed in repair in opening as per specification and drawing complete as directed.

S&F PVC door/cup board shutter 30 mm thick consting of frame made out of MS tube for top and botom rail with PVC sheet strip 20 mm width suitable PVC sheet bedding complete fixing to frame etc all as specified.

S&F Stainless steel butt hinges medium weight 100mm long complete all as specified and directed

S&F Aluminium anodised barrel tower bolt of extruded section 150 mm size complete all as specified and directed.

S & F of mild steel work such as window guard bars door frme and similar work conforming to Fe – 290 Grade – E 165 complete all as specified and directed.

S & F aluminium anodised ventilator with fixed aluminium frame of size 65 x 40 x 1.98mm thick fixed in vertical position with aluminium vertical members and half portion to be provided with 4mm thick pin head glass and remaining portion to be louvered using 4mm thick pin head glass including necessary channel frame work, including rubber gasket and frame with wire mesh of aluminium,and deco grill ,aluminium beading complete all as specified and directed

S&F aluminium powder coated framed windows, any pattern, fixed/side hung/sliding Three track , AC opening using powder coated aluminium sections of approved make, with or without sash bars, suitable for 5 mm thick glazing and Aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm wire guaze, including necessary rubber packing, joining cleats, glazing clips, aluminium snap beading, handles, locking arrangementsetc, frame of window should be of 1.5 mm thick section & shutter sec including cutting down existing glazed/gauge shutter complete all as specified and as directed Note :Rates include all glazing/aluminium wire cloth, rubber packing, jointing cleats, glazing clips, aluminium snap beading, locking arrangements, handle etc

Taking up or down GI tubing 15/20mm bore pipe and connection including cleaning for refixing or removal from site as directed

Supplying and laying of 20 mm bore CPVC pipes SDR 11 and plain CPVC SDR 11 fittings in trenches, fixing on walls/ceiling or laying in floors complete all as specified

Cutting chases, pinning in, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting n.exc 10 cm girth.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing (but not backing) removing serviceable tiles and rubbish off the premises.

M & L for coloured glazed ceramic tiles of size 450X 350X 7mm thick on vertical surfaces such as skirting, dados etc, set and jointed in neat cement slurry and pointed in coloured cement to match over and including rendering 10mm thick in CM 1:4, complete all as specified and directed. complete all as specified and directed.

M & L for Vitrified ceramic tiles 8 to 9mm thick (square/rectangular) light shed /double charged / ultra charged area of each tile n.exceeding 0.36 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. incl screed bed 15 mm in CM 1:6 complete all as specified and as directed by Engr-in-charge.

All as per item 48.00 above but in vertical surfaces such as skirting over and including 10 mm thick backing coat in cement mortar 1:4 complete all as specified and directed

M & L for non skid ceramic (colored), 7 to 8 mm thick as in floor area of each tile 0.06 sqm but not exceeding 0.11 sqm , set and jointed in neat cement slurry and pointed in white or colored cement to match incl and over screed bed or beeding layers of mortar 15mm thick in CM 1:6 in floors, complete all as specified and directed. complete all as specified and directed.

M & L for 18-20 mm thick granite slab (Red/black) work (table rubbed and polished) in steps, Jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including 20 mm thick cement plaster (1:3).(All exposed surfaces should be bull nosed)

Dismantling of PVC water Tank of any descriptionand at any position 250 to 500 but n.exc 500 ltr capacity and removing to store/removing from site.

Dismantling of PVC water Tank of any descriptionand at any position exc 500 ltr and n.exc 1000 ltr capacity and removing to store/removing from site.

S&F in repair Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) 500 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer in Charge

S&F in repair Rotational moulded polyethylene Water storage tanks (cylindrical vertical with closed top) 1000 litres capacity hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed by Engineer in Charge

S&F in repairs shower rose 150 mm dia/square of brass chromium plated fancy type with or without swivel joint suitable for fixing to 15mm bore GI pipe complete all as specified and directed.

S&F in repairs bib taps 15mm bore of cast copper alloy chromium plated fancy type, screwed for iron pipe or for brass ferrule & fixed complete all as specified and directed.

S & F in repairs stop valvew/Angle valves fancy type chromium palted with long shank and cup screwed for iron pipe of 15 mm bore, screwed both ends includinf necdessary fittings such as sockets for pipes or for union complete all as specified and as directed

S&F CP Sink mixer with regular spout W/M 15mm dia fixed in repair complete all as specified and directed.

S&F brass CP bottle trap 32mm for wash hand basin with inlet and outlet screwed for iron pipe, fixed in repairs.

S&F wall mounting Mixture valve of Chromium plated, 15mm bore fixed in repairs.

S&F in repair 15 mm dia bore pillar taps cast copper alloy with capstan heads chromium plated fixed in repairs 15mm bore fancy type screwed down, high pressure with long screwed shanks and fly nuts, screwed down for iron pipe or for union.

S&F in repair CP towel rail 60 Cm long, complete all as specified and directed.

S&F in repair CP towel rack complete all as specified and directed.

S&F stainless steel kitchen plate rack, 1 mm thick of size 900 mm x 780 mm x 222 mm fixed to wall in repairs with brass screws complete all as specified and directed.

S & F in repairs viterous china wash down water close (Pedestral pattern) EWC white incl plastic water closet seat cover and mild steels chromium plated on aluminium hinging device and connecting to 'P' or 'S' incl connecting flush pipe with flushing rim all as specified and directed.

S&F in repair PVC seat cover for pedestal pan, white closed pattern with flat bottom and cover and mild steel chromium plated or aluminiumised hanging device complete all as directed.

S&F in replacement of PVC cabinet size 650 x 400mm, comprising of looking glass, space for bath soap, shampoo, tooth brush and paste, handle towel rail complete all as specified and directed

S&F in repair vitreous china ware wash basin, white flat back size 550 x 400mm excluding taps, waste chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1mm thick sheet plugs, washers, waste coupling and waste pipe, including a pair of cantilever brackets embedded in wall with suitable size of PCC (1:3:6) type C-1 blocks and connecting union to pipe of overall size 915mm x 460mm & bowl size 410mm x 330mm x 160mm all complete as specified and as directed.

S&F in repairs 10 ltrs capacity PVC valve less, syphonic action type flusing cistern, low level white with inlet ball valve float and handle including brackets, complete all as specified and directed.

S&F vitreous china water closed (squatting pan), orissa patern size 580 x 440mm white with integral, foot rests an including 'P' trap and lime bedding making doog to floors complete fixed in repairs complete all as specified and directed.

S&F in repair health faucet with one meter tube and hook complete all as specified and directed.(Cat part No BEA-81 of Make-Prayag or its equivalen make).

S & F 15mm size PVC connections with PTMT nuts of length 450mm and fixed in repairs complete all as specified and directed.

S/F grating doom 150 mm size of PTMT (Minimum weight 100 gms) complete all as specified and directed.

S&F 32mm dia PVC waste pipe fixed in repairs. Including Cup bracket complete all as specified and directed.

Dismantling of CI/PVC/AC jointed in cement mortar and taking out of trenches, if required with fittings of any description complete all as specified and directed..

S & F 110mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc. complete all as specified and directed

S & F 75 mm bore C I soil waste and vent pipes sand cast, in any length with or without ears with cement jonts fixed to wall incl fittings and fixtures like bend , elbow, Y(equal or unequal),tee etc. complete all as specified and directed

S&F in repairs 75mm bore PVC (SWR) floor trap long body type with grating including jointing with solvent cement complete all as specified and directed

S&F in repairs 125/110mm bore PVC (SWR) gully trap plain with grating including jointing with solvent cement complete all as specified and directed

S & F glass shelf (Three of Set) assembly straight/corner with chrominium plated brass bars complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed

M&L for preparation of new steel surfaces exc 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified.

S&F in repairs, wash down water colset (wall hung type ) with seat cover of jaquar florentine or equivalent , jaquar catalog no. ONS-WHT-10953BIUFSM (inlusive of brackets), to pedestal pan including all joints, trapete complete all as specified and directed

M & L for plain fillets, square, rectangular or triangular in section clean sawn, secured with nails 2nd class hard wood exc 13 and n.exc 25 sqcm complete all as specified and directed

S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws/nails to timber frame work as in cupbord door/shelves complete all as specified and directed

S&F in repair 18 mm (+0.7mm) thick solid PVC Sheet one side prelam for cupboard shutter of density 600 Kg/Cbm bent 900 and finish at all edges at level for makingedges at level for making edge lipping/bendingor 0.5 mm thick PVC sheet lipping at 4 edges using bonding taps etc complete all as specified and directed

S & F MS Auto hinges of crank 0 degree & 90 degree, fixed with screws to timber frame complete all as specified and as directed.

S&F G Profile handle for kitchen cabinet/Cubboard fixed to board complete all as specified and directed.

Taking down shutter resecuring, easing and cutting refixing in the same opening shutters of any description exc 1 Sqm and not exc 2 Sqm complete all as specified and directed.

Dismantling wall and ceiling boards any description, any thickness, including cover fillets complete all as specified and directed

S&F Tee grid suspension system of size 600 mm x 600 mm type-1 made out of roll framed hot dipped galvanised steel zince coated of not less than 120 gm/Sqm, main runner 0.3 mm thick of section 24 mm x 33 mm crross runner 0.30 mm thick of section 24 mm x 25 mm, wall angle shall be 0.63 mm thick of section 24 mm x 24 mm grid shall be suspended by 4 mm dia adjustable quick fit hanger rod, system exposed portion shall be pre painted polyester coated in off whitee/white in colour complete with material, fixing, jointing etc., with Coloured textured designer ceiling board (Everest)/Asbestos Cement white fiber Board 4mm thick of size 595 x 595 mm fixing with screws/clips complete all as per manufacturers instructions and direction.

M&L in repair for water proofing treatment to non accessible RCC roofs by providing 10mm thick screed in CM 1:3 mixed with & including water proofing compound @ 3% by weight of cement & applying one coat of bituminous primer @ 0.30 kg/sqm & laying APP based polymer modified membrane with polyster non woven reinforced of weight not less than 3 kg/sqm 3mm thick with polythene finished sealing with side over laps of 75mm & 100mm laps at the ends of membrane by torch application method & applying two coats of aluminium paint complete all as specified and directed

S/F of 4 mm thic AC cement plaing building bd to timber work with screw complete all as specified and directed

Providing & applying rising damp-proof costing system with single component ready to use damp- proof coating Roff Hydamp : 1. Surface preparation thoroughly brush and clean all laltance, loose particles such as dirt, grease, mortar droppings , release agents, efflorescence, bird droppings , etc. All large volds or hollow portions must be removed and re-plastered , Non - moving cracks having width upto 5 mm must be filled with polymer based brack filler. 2. APPLICATION : Apply the first coat of Dr fixit Damp guard Classic with a paint brush directly on the prepared surfaces by mixing (1 part base : 1 part hardner : 1 part of water). Allow to dry for a minimum 2-3 hrs . Apply on e part of DAMP GUARD mixed chemical and 2 parts of OPC whte cement / Birla putty and make the putty , apply putty on the entire surface area. Allow it to dry for at least 3-4 hours . Apply the Final coat of Dr Fixit Damp guard classic on the entire surface and allow the surface to air cure 48 hours proceeds for Paint