Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 LAccepted-AOC BABAPORE KHREW PAMPORE PULWAMA KASHMIR | PULWAMA | JAMMU AND KASHMIR | 191102 | L1 | Accepted-AOC Lowest bidder and quoted reasonable rate | |
| 2 | L2₹6.9 L+₹89,789.50 (14.9%)Rejected-Finance R O Y K PURA QAZIGUND ANANTNAG 192221 J K | ANANTNAG | JAMMU AND KASHMIR | 192221 | L2 | Rejected-Finance Other than lowest bidder | |
| 3 | Rejected-Technical | - | Rejected-Technical Not admitted as the firm is banned for participating in tender till 25 Oct 2023 by HQ CWE Khumbhathang |
Tender Value
₹8.2 L
EMD Value
₹16,480
Closing Date
14 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, Kargil
GE Kargil, PIN - 908121, C/o 56 APO
GE-K-44-2023-24 - SPL REPAIR TO BLDG NO T-77 (D COY OR LIVING) OF 13 JAK RIF AT DRAS UNDER GE KARGIL
2023_MES_619057_1
GE/K-44/2023-24
Open Tender
Civil Works
Item Rate
180 days
Dras
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE Kargil
₹16,480
12 Jan 2024
15 Sept 2023
16 Oct 2023
15 Sept 2023
14 Oct 2023
30 Sept 2023
Amount
Demolition of Cement Concrete (unreinforced) in ground floor and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed
M&L Chequered cement concrete tiles 30cm x 30cm x 25mm thick, etc, jointed and pointed in neat cement slurry in floors with grey cement and no pigments over 15mm screed bed in CM 1:6 complete all as specified and as directed.
M&L 75mm thick cement concrete type C-2 1:3:6 (40 mm graded aggregate) as in sub base of floors.
M&L machine cut Kota stone slab flooring 20-25mm thick, over cement screed bed or bedding layer of cement mortar 20mm thick in CM 1:4 for laying floor finishes base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
Taking down cement plaster on Brick or concrete surfaces incl racking out joints hacking for key scrubbing down with water etc complete
M&L machine cut Kota stone slab 20-25mm thick,in riser of steps,skirting,dado and pillar laid over cement screed bed or bedding layer of cement mortar 15mm thick in CM 1:6 for laying floor finishes base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.
M & L rendering 15 mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finishing even and smooth without using extra cement complete all as specified and as directed
M & L rendering 15 mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finishing fair and even complete including using water proofing compound all as specified and as directed by Engr-in-Charge (WPC shall be measured & paid for separately)
M&L for preparation of newly plastered wall surfaces and applying two coat of cement base paint over a coat of alkali resistant priming paint complete all as specified and directed
M&L preparation of new plastered surfces of walls and applying two coat of OBD over a coat of birla wall care putty for smoothness of surfaces complete all as specified and as directed.
M&L PCC 1:3:6 type C-2 using 40mm graded aggregate as in plinth protection 75mm thick, finished even and smooth w/o using extra cement.
Dismantling of plain or corrugated CGI/PGI steel sheeting any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed
S&F for Galvanised corrugated mild steel sheeting of 0.63mm with two corrugations side lap,fixed with L-type or J-type with coach screws and washer in roofs,walls etc with grade of zinc coating 275 bent to a curve of any radius complete all as speciified and as directed
M&L for preparation of New steel and iron surfaces of any description , not otherwise described ,over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as speciified and as directed
Dismantling timber scantlings as in fillets,rails,posts,rafters, purlins, etc. under 40 sq.cm in framed work,in any position complete, all as specified and directed.
M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm in square, rectangular or traingular in section, clean sawn secured with nails or brads complete all as specified and directed
Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/ slabs/blankets, any thickness, including cover fillets all as specified and as directed
S&F, 12 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work complete, all as specified and directed
S&F, 9 mm thick prelaminated particle board, for ceiling interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with nails to timber rame work complete, all as specified and directed
M&L for Plain fillets of second class soft wood (KAIL), sectional area exceeding 6 Sqcm but not exceeding 13 Sqcm in square, rectangular or traingular in section, bullnosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed
M&L for side cornice fillets of second class soft wood (KAIL), sectional area exceeding 3 Sqcm but not exceeding 6 Sqcm in section, bullnosed, splayed, chamfered or rounded fixed with nails to timber frame work complete all as specified and directed
Taking down chowkats with shutter (without taking off shutter from the frame) exc 1.5 Sqm but n.exc 4 Sqm each.
Taking down shutter of any description n.exc 1 sqm each.
S&F plain solid straight chowkats and framed wrought framed rebated on the solid rounded or chamfered put together with glue pinned at joints 2nd class soft wood (KAIL) complete all as specified and as directed.
S&F 35 mm thick 2nd class soft wood (KAIL) plain framed panelled shutter (any number of panels) with panels of timber flat on both sides (Feather edge) or of veneered particle board medium density wood particle board with commercial face veneers and fitted to chowkhat.
S&F 30 mm thick 2nd class soft wood (KAIL) glazed and skeleton shutter open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated sash bars any numbers
S&F 200mm long Aluminium anodiseld barrel tower bolt of extruded section and fixed complete all as specified and as directed
S&F 150mm long Aluminium anodisedl barrel tower bolt of extruded section and fixed complete all as specified and as directed
S&F 100mm mild steel butt hinges medium weight , cold rolled complete all as specified and as directed by Engr-in-Charge
S&F 75mm mild steel butt hinges medium weight , cold rolled complete all as specified and as directed by Engr-in-Charge
S& F aluminium handles cast type anodised size125mm complete all as specified.
S& F aluminium handles cast type anodised size150mm complete all as specified.
S&F 250mm Aluminium alloy, anodised,sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed
S&F pane galss 3mm thckness pin headed type and glazing with oil putty n exc 0.5 Sqm in each pane.
Supply only liquid water proofing compound
M&L for preparation New surface of wood and wood based material surface of any descriptiony description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primercomplete all as specified and as directed
M&L for prepration of old painted surface of wood and wood based material and two coat of synthetic enamel paint of any description, not otherwise described over 10cm width or girth complete all as specified and as directed
Demolition of Brickwork or stone/boulder masonry, laid dry all as speciified and as directed.
M&L for walling of random rubble uncoursed well bonded solidly hearted bult in cement mortar 1:6 complete all as specifed and directed by Engr-in -charge.
Taking down carefully copper or aluminium point wiring (light, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, sockets bulk, head fitting, tube light fitting by unscrewing carefully from boards etc and making good, distrubed surface of walls floors etc.
M&L for Point wiring for light/fan/bell with FRLS cable of 1.5sqmm PVC insulated (red/blue/yellow for phase, black for neutral and green for earth) unsheathed multistranded copper conductor 1100 volts grade in and including not less than 2mm thick PVC casing caping with all accessories and 1.5sqmm green in colour PVC insulated multistranded copper conductor FRLS cable for earth continuity connected to common earth dolly incl MS sunken box with 3mm thick pre laminated hylum sheet/PVC box flush/surface type for mounting fittings such as switches,socket,and regulator complete all as specified and directed for one light point or bell/buzzer point controlled by one switch.
All as per Srl item No 41 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 5 Amps independent board.
All as per Srl item No 41 here in before but using cable size 2.5 Sqmm for one 3 pin socket outlet 15 Amps independent board.
S & F Switch piano flush type 5 Amps, single pole one way.
S & F Switch socket combination 2 in 1, 3 and 2 pin, 5/6 Amps flush type.
S & F Switch socket combination 2 in 1, 5 and 15 Amps flush type.
Supply and fixing LED 1x18/20 Watt, 220 V, AC decorative box type fitting with driver, holder including LED tube ligh having lumen out put100lm/wattt,CCT:6500K , PF>0.9, and connecting up with two core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.
S & F Ceiling rose on PVC squre block surface bakelite, two to three terminals.
S & F Sheet metal enclosure for DB's double door, Single pole and neutral, 240V, 8 way with 200 Amp rated bus bar including blanking plates where required. Complete all as specified and directed.
Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SPN 32 Amp in the MCB DB complete with connection testing and commissioning.
Supply and fixing in replacement 240 V 10 KA C curve miniature circuit breaker (MCB) SP 5 to 32 Amp in the MCB DB complete with connection testing and commissioning.
M&L for House Service bracket (hook type) complete with 3.0 m long G.I pipe 40 mm dia (medium grade), two numbers 90° bends, M.S hook and stay including taking down the existing unserviceable bracket. NOTE :- The unit rate shall to include for :- (a) Cutting holes in walls etc. of any description, grouting rag bolts and making good with cement mortar 1:3 including making good finishing to match the existing work and removing rubbish off the premises as directed (in case of bracket being fixed to masonry wall). (b) G.I pipe house service bracket hook type fabricated out of 3.0m long screwed G.I pipe of medium grade and comprising of two number 90° bend (pipe dia) screwed tight to the top ends of the service vertical limb, the two ends of the service provided with two number of turned spit tight fit, well seasoned teak wood bushing and the bracket fixed plumb vertical against the wall with two number flat iron clamps (fabricated out of 50 x 6mm flat iron with 4 No. 16 mm dia ragged bolts of appropriate size with screwed ends, tightened with 16 mm dia nuts with 6 mm thick washer against the clamp tightening collar.
S&F in replacement 1100 volts grade heavy duty 10 sqmm 2 core flat cable PVC insulated aluminium stranded conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 01 metre apart including 4 mm suspension complete all as specified.
S&F in LED light fitting 1x9W/1x10W bulkhead luminaries including LED light driver holder connecting up three core flexible copper conductor cable of suitable size.
M&L for Earthing complete with galvanised steel earth plate electrode of size 60cm×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to and including GI iron wire of size 4 mm dia by means of GI bolts, nuts, check nuts and washers, protected by 15mm bore GI light grade ISI marked pipe upto and including test points. Earth plate shall be surrounded by alternate layer 15cm thick of charcoal or coke and common salt all around bottom and top , 20cm bore GI medium grade ISI marked pipe for watering and including funnel,wire mesh,PCC chamber pit made with PCC(1:3:6) type C-1(using 20mm graded stone aggregate) including necessary form work, excavation and earth work in any type of soil, returning filling and disposal of surplus soil to a distance not exceeding 50M, CI pit cover duly painted with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified & shown in electrical plate No.3 of SSR 2009(Part-I) and all as directed. Note:- (i) Protection pipe and earthing wire upto test point from top of the earth plate and further upto the body of electrical equipment shall be included in the unit rate of this item. (ii) Earth testing arrangement should be done by contractor as per direction of Engr-In-Charge.
Note : Deduction for amount of Rs 10763.00 as listed in Schedule A Part - II ( Schedule of Credit) shall be made while awarding of contract.
M/S BHAT ENGINEERS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .