SPECIAL REPAIRS TO BLDG NO. P-227 5 ROOMS INCLUDING TOILETS AT OFFRS MESS EME SCHOOL VADODARA UNDER GE A BARODA

Amount

Taking down cement plaster on brick or stone walls or concrete surfaces, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete.

M & L for 10 mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces and surface finished even and smooth without using extra cement all as directed.

M & L for rendering 5mm thick on brick wall surface or concrete surfaces of ceiling in cement mortar 1:3 for finished even and smooth (without using extra cement)

M & L for preparing new plastered surfaces of wall and applying two coats of oil bound distamper over and including a coat of 3mm average thick wall care putty and one coat of chalk whitening primer

M & L for preparing new plastered surfaces of ceiling and applying two coats of oil bound distemper over and including a coat of 3mm average thick birla/equivalent wall care putty and one coat of chalk whitening primer

M & L for 25mm thk prelaminated particle board, interior grade, prelaminated both sides with decorative choice laminations fixed with screws to aluminium frame work all as specified and directed.

Demolition of stone slabs and tiles of any description or thickness in floors & wall, laid bedded & pointed in any mortar.

M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, double charged, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor fiishes with CM 1:4 complete.

M&L for non skid colour ceramic tile 8 to 9mm thick area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of mortar 15mm thick for laying floor finishes with CM 1:4.

M&L for coloured (of any shade) vitrified ceramic tiles 10 mm thick (square/ rectangular) polished, double charged, area of each tile exceeding 0.36 sqm but not exceeding 0.42 sqm, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10mm thick rendering for backing coat on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles.

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering or backing coat on vertical surface of wall or concrete surfaces in CM 1:3 to receive wall tiles.

M&L for PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and as directed.

M&L 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing. Upto 1.5m height

S&F in repairs Vitreous china premium/ 1st quality wash down water closet wall hung EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. (excluding flushing cistern & flush pipe) of size 655 x 350 x 735 mm (Cat. No. S1031101) of CERA or equivalent including plastic water closet seat, (Cat. No. B1520102) soft close seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging devicecomplete in all respect all as specified. (Make: Cera or equivalent)

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified. (Make: Cera or equivalent)

S&F in repairs Bib cock with wall flange and aerator (Cat part No. F1015151 or equivalent) 15mm bore cast copper alloy with capstan heads, screwed down high pressure with long screwed shanks and fly nuts screwed for iron pipe and fixed complete all as specified and directed. (Make: Cera or equivalent)

S&F in repairs brass (Cat No.F1015401or equivalent) Wall mixer with bend pipe for overhead shower CP wall mixer for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. (Make: Cera or equivalent)

S&F in repairs for PVC low level flushing Cistern white with Twin flush fittings Cat. No. S1062128 or equivalent)10 ltrs capacity with all internal accessories & fixed to wall & making good to wall surfaces including taking down existing flushing cistern complete. Make: Cera equivalent.

S&F in repairs Chromium plated toilet paper holder.

S&F in repairs Soap Dish (Glass) (Cat No.F5003116 or equivalent) fixed to wall with brass chromium plated screws complete all as specified and directed. Make : Cera & equivalent

S&F in repairs 600mmx 450 mm Superior Quality Glass Frameless Rectangular Glass (of thickness 5mm) Wall Mirror Unframed, with chromium plated brass screws and cup washers complete all as specified and as directed by Engr-in-Charge.

M & L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete.

S&F in repairs Vitreous China wash hand basin, angle back 550x400mm white excluding taps, waste chains and plugs and porcelain stopper but including bracket complete.

S&F in repairs brass Single lever basin mixer with 315 mm (12.5”) extended body and 600 mm braided connection pipe (without pop-up) (Cat No.F1015452 or equivalent) for mixing hot & cold water three way screwed down for iron pipe 15mm bore and fixed complete. Make Cera or equivalent

S&F in repairs 32mm dia flexible waste pipe for urinal, wash basin and kitchen sink of length exc.1m not exc 2m complete.

S&F in repairs stop valves/angle cocks or two way angle cock fancy type chromium plated with long shank and cup (concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore iron pipe or for unions and fixed complete all as specified and directed.

S&F grating 150mmx150mm made out of stainless steel complete all as specified and directed.

S&F in repairs 15mm dia 450mm long PVC connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.

S&F in repairs SS waste coupling of 32 mm dia (half or full threaded), for WHBs, urinals complete all as specified and directed.

S & F in repairs chromium plated (Cat No.F7010609AB or equivalent) Overhead Rain shower 150 mm dia (6") with or without swivel joints any siz , including fixing to GI pipe complete all as specified & directed. Make Cera or equivalent

Taking up or down GI tubing 15mm bore from trenches/wall including all fittings complete all as specified and directed.

Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings fixed complete to walls and ceilings or laid in floors all as directed.

Taking up or down GI tubing 20mm bore from trenches/wall including all fittings complete all as specified and directed.

Taking up or down GI tubing 25mm bore from trenches/wall including all fittings complete all as specified and directed.

S & F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

S & F 25mm bore galvanised mild steel tubing medium grade with all fittings and fixed complete to walls and ceilings or laid in floors all as directed.

Taking down chowkats or frame with shutter (without taking off shutter from the frame) n.exc 1.5sqm each

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

S & F 30mm thick factory made both sides prelam panel PVC door shutter consisting of frame made out of MS tube of 19 gauges thickness and size 19mm x 19mm for stiles, top and bottom rails, MS frame shall have a coat of steel primer of approved make and manufacture. MS frame shall be covered with 5mm thick heat moulded prelam PVC C channel size 30mm thickness, 70mm width, out of which 50mm should be flat and 20mm shall be tappered in 45 degree < on either sides forming stiles and 5mm, 95mm wide prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115mm wide. prelam PVC sheet out of which 75mm shall be flat and 20mm shall be tappered on both sides to form lock rail. Top rail, bottom rail and lock rail shall be provided either sides of the panel 10mm (5mm x2) thick 20mm wide cross PVC sheet shall be provided as gap insert for top rail, and bottom rail paneling of 5mm thick both side prelam PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with 7mm (5mm+2mm) thick 15mm wide. PVC sheet beading on inner side and jointed together with solvant cement adhesive, an additional 5mm thick PVC strip of 20mm width is to be stuck on the interior side of C channel using PVC solvant adhesive etc. complete all as specified and directed.

S&F for Framed work as in door frame, grill/grating of angle or other section with gusset plates, rails, braces, etc., complete for tank cage, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Gde Fe-290 (Gde E 165)all as specifed and directed.

M & L for preparing new steel surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for 35mm thick factory made Flush shutters, solid core construction, with block board core and plywood face panels, comercial type 1.0mm thick ,veneered on both side with decorative choice laminate type 1 (factory laminated),including 6mm thick external teak wood lipping fixed with nails, color and pattern as approved by EIC/GE.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165

M & L for Cement concrete type B1, 1:2:4 (20 mm graded aggregate) as in coping, bed plate for hold fast etc.

M&L for 100mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed.

M&L for 75mm butt hinges of stainless steel grade 202, 14 gauge thickness, medium weight of approved make fixed with pressed steel door frame/Angle iron frame/PVC door frame with screw complete all as specified and directed.

S & F 200mm long Aluminium anodised barrel tower bolt of extruded section and fixed

S & F 250 mm aluminium alloy anodised sliding door bolts, with hasp and staple (bolt type) not less than 12mm dia with and and fixing clips of sheet cast or extruded section and fixing bolt and sliding bolt of extruded section or cast aluminium and fixed to wooden door shutters

S&F 150 mm size extruted aluminium alloy handles, fabricated type anodised complete all as specified and directed.

S&F in repairs vertical type venitian blinds with sliding & revolving track & 100mm wide approved coloured fabric etc complete as directed by Engr-in-charge

S&F in repairs, Cat. No. F5015131CH or equivalent Towel Rack With Hook 24" 600mm Long with Lower Hangers, Stainless Steel complete all as specified and directed. (Make: Cera or equivalent)

Demolition brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars, etc,

M & L for brick work kiln burnt bricks (old size) built in cm (1:6) using sub class 'B' brick straight or curved on plan exceeding 6m radius complete all as specified and directed.

S&F in repairs precast steel fibre reinforeced concrete drain covers, factory made in cement concrete 1:2:4 type B1 using 20mm graded stone aggregate with and including reinforcement of 8mm dia TMT bars at 150mm c/c both ways including MS frame at the edges of cover and handles 2 Nos each cover made of 12mm dia MS round bar, set in CM 1:6 complete, thickness and sizes of covers shall be as directed by Engineer-in-Charge.

S&F in repairs including disconnecting tanks, 1000 ltrs rotational moulded triple layred, polyetylene water storage tanks (cylindrical vertical with colsed top) hoisted and fixed in position all as directed.

S & F in repairs 25mm dia bore gun-metal, globe or gate valves with iron wheel head screwed both ends for iron pipe and fixed

S & F 110mm PVC (SWR) WC connector with lip ring all as specified and as directed.

S & F 110mm PVC (SWR) WC connector bent type to fit WC outlet all as specified and as directed.

S&F in repairs 75 mm dia PVC (SWR) pipes, single socketed in any length with rubber ring joints and fixed to wall as in waste/soil pipe complete.

S & F in repairs 75mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F 110mm PVC (SWR) junction single, (Single T, 'Y' type) equal or unequal all as specified and as directed.

S & F 75mm PVC (SWR) junction single, (Single, 'Y' type T) equal or unequal all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall or in floors all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches all as specified and as directed.

S & F in repairs 75mm bore PVC (SWR) bends any radius with oval access doors all as specified and as directed.

S & F in repair 75mm PVC (SWR) floor trap including jointing with solvent all as specified and as directed.

S & F in repairs 110mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F in repairs 75mm bore PVC (SWR) branch piece, single (single Y) equal or unequal or with parallel branches with access door all as specified and as directed

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 110mm bore pipe all as specified and as directed

S & F stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays incliding bolts and nuts and securing ends of stays to walls and roofs for 75mm bore pipe all as specified and as directed

S & F 110mm PVC (SWR) vent cowl all as specified and as directed

S & F 75mm PVC (SWR) vent cowl all as specified and as directed

Demolition of existing PCC/lean concrete including floor tiles and removing rubbish off the premises.

M&L for 15 mm thick plaster in sunken portion with CM 1:3 mixed with water proofing compound @3% by wt of cement and should be even and smooth without using extra cement all as directed. Note . (WPC will be measured and paid separately).

M&L for providing & laying applying one coat of bituminious/polymerized primer confirming to IS-3384 @ 0.40 Ltrs/Sqm, 3 mm thick APP modified polymeric membrane of weight of 3 kg/sqm with non-woven polyester reinforcement shall be laid over a coat of bitumen S-35 grade (30/40) applied @1.20Kg /Sqm (minimum) with minimum 75 mm side overlaps and minimum 100 mm end overlaps, joints & overlaps shall be sealed as per manufacturer instructions complete all as specified and as directed.

M&L for sunken portion filled with lean concrete 1:5:10 using brick/lime aggregate and finish the surfaces rough to receive sub base complete all as specified and as directed.

M & L for 25 mm thick cement concrete in flooring type Bo, 1:2:4 (12.5mm graded aggregate) with water proofing compound @3% by wt of cement for laying floor tiles. Note (WPC will be measured and paid separately).

Supply only Integral water proofing compound all as specified and directed.

S&F in repairs, 25 mm dia chromium plated tubular curtain rod complete all as specified and directed.

S&F in repairs chromium plated brackets for 25mm dia curtain rod complete all as specified and directed.

M & L for preparing old wooden surface of any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint to match the existing surfaces.

Taking down carefully existing unserviceable copper/aluminium point wiring (light, fan, socket or power point etc) complete with fittings/fixures such as switches sockets, ceiling rose, fan regulators, etc (except light fittings), and making good disturbed surface of wall, floors, etc complete all as directed by Eng-in-Charge.

M & L for Point wiring complete with 1.5 sqmm single core PVC insulated (FRLS) and unsheathed cable 1100 volts grade with multistranded copper conductor drawn through and including PVC Conduit and all accessories Concealed in walls / roofs / floors / ceiling etc. and including provision of 1.5 sqmm copper cable as earth continuity conductor and connected to common earth dolly, in modular sunken boxes in wall with modular plate cover for housing the switches, socket outlets, fan regulators etc complete including cutting chases where as required and making good all disturbed work to match the existing all as specified and as directed for the following:- Note :- Modular switch and socket, modular sunken boxes & modular switch cover inner and outer to be measured and paid for separately in relevent items

One light point / fan point / bell point controlled by one switch / bell push

One 3 pin socket outlet 5 Amps independent board.

One 3 pin socket outlet 5 Amps on the same board with other switch.

All as per item No. 86 here-inbefore but with 2.5 sqmm PVC insulated multistranded flexible unsheathed copper conductor inclusive of 2.5 sqmm PVC insulated multistranded flexible copper conductor as earth continuity conductor for one independent 6 pin 16 Amp socket.

Supply and fixing for Modular type switch 1 way 6A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete as all as specified and directed

Supply and fixing for Modular type switch 1 way 20A, 1module, 230 V,AC 50Hz ISI Marked with valid CML No. complete all as specified and directed

Supply and fixing for Modular type socket outlet multipurpose having provision for Socket, 6A - 2/3 pin combined 2 module, 230 V, AC 50Hz ISI Marked with valid CML No. complete all as specified and directed

Supply and fixing for Modular type socket outlet multipurpose having provision for 3 pin 16A and 3 pin 6A, 2 module, 230 V, AC 50Hz ISI Marked with valid CML No. complete all as specified and directed

Supply and fixing for Modular type Fan step regulator electronic type, 230V,120W - 2 module ISI marked with suitable CML No and connecting upto complete all as specified and directed

Supply and fixing for Modular type Bell push 6A, 1 module ISI marked with suitable CML No and connecting upto complete all as specified and directed

S & F ceiling rose surface polycarbonate body three terminal.

S & F of ceiling fan complete with blades, down rod from existing roof / truss to fall ceiling, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor including ceiling fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV ceiling fan complete all as specified and directed. Note : 1) Old ceiling fans shall be deposited to AGE E/M store yard for re issue

Supply & fix of exhaust fan steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers, voltage 230V, 50Hz, RPM 1200, copper winding complete including exhaust fan connecting up with three core flexible copper conductor cable of suitable size from ceiling rose and taking down existing UNSV exhaust fan complete all as specified and directed. Note :1) Old unserviceable Exhaust fans shall be deposited to AGE E/M store yard .

Supply and fix of LED light fitting 1X20Watt, 220 Volt AC decorative box type with drivers, holders and including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old unserviceable existing light fitting complete all as specified and directed.

Supply and fix of LED batten tube light fitting of capacity 10 Watt, including tube rod 2' long indoor decorative LED engineering plastic batten with opal diffuser, IP20 protection complete all as specified and directed. Make :- Havells / Phillips / Wipro

Supply and fix of decorative type wall light fitting suitable for B-22 type holder inclouding one LED lamp 9 Watt complete all as specified and directed

S & F Ding Dong call bell AC, 230 Volt, single Pole complete all as specified and directed

M & L for Sub main wiring with FRLS two run of single core PVC insulated and unsheathed fire retardant multi stranded copper conductor cable 1100 volt grade IS-694, marked of 4.0 Sqmm size drawn through and including not less than 32 mm dia PVC conduit medium grade ISI marked and conduit junction boxes, terminal boxes and accessories such as tees, bends, elbows, reducers, bell mouth tube ends concealed in walls / roofs / floors / ceiling etc including one run of 4.0 sqmm PVC insulated and unsheathed FRLS multi stranded copper conductor cable for earth wire continuity conductor complete including cutting of chases where as required and making good all disturbed work to match the existing all as specified and as directed NOTE : two runs of single core 4.0 sqmm and one run of 4.0 sqmm copper FRLS cable as earth continuity conductor and suitable size conduit with accessories shall be measured as one length.

S & F sheet metal enclosures (double door) for DBs where MCBs to be used single pole and neutral 8 way 240 V with 200 amps rated bus bar fixed on wall complete with all acessories including taking down old unserviceable MCB DB with MCBs complete all as specified and directed

S & F incl connecting MCB single pole, having rupturing 10KA, 6 amps to 32 amps as ordered 240 Volts

S & F MCB Single pole and neutral (SPN), having rupturing 10KA, 240 V 63 amps as ordered.

S & F of electric water heater, storage type ABS body with stainless steel inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection pipe etc complete all as specified and directed Note : 1) Old water heater shall be deposited to AGE E/M store yard .

Supply & Fix of modular White cover plate with frame, 1/2 module complete all as specified and directed

Supply & Fix of modular White cover plate with frame, 3 module complete all as specified and directed

Supply & Fix of modular White cover plate with frame, 4 module complete all as specified and directed

Supply & Fix of modular White cover plate with frame, 6 module complete all as specified and directed

Supply & Fix of modular White cover plate with frame, 8 module complete all as specified and directed

Supply & Fix of modular Metal flush box 1/2 module complete all as specified and directed

Supply & Fix of modular Metal flush box 3 module complete all as specified and directed

Supply & Fix of modular Metal flush box 4 module complete all as specified and directed

Supply & Fix of modular Metal flush box 6 module complete all as specified and directed

Supply & Fix of modular Metal flush box 8 module complete all as specified and directed

Supply & fix Modular Power unit 25 Amp unit including suitable size of sunken metal box and white cover plate including Modular Miniature Case Circuit Breaker and plug top with indicator of capacity 25 Amp complete all as specified and directed by Engr-in-Charge

Supply and fix electronic meters temper proof LCD display with polycarbonate cover 230 V, 10-60Amp, accuracy class-I 50Hz, conforming to IS 13779, IP-54, with parameters to show data, time, current reading, load, PF, voltage, KWH and transparent PVC cover complete all as specified and directed Note : 1) Old Electric Meter shall be deposited to AGE E/M store yard.

City Light

Shree Vaishno Enterprises