REPAIR AND PAINTING STEEL ALMIRAH, STEEL LOCKERS, STEEL TABLES, BED HARD (MAP), CHARPOY IP RECTANGULAR, BED HARD AT AF STATION JODHPUR UNDER GE (AF) NO 2 JODHPUR

Amount

ALMIRAH LARGE STEEL WITH SHELVES, ALMIRAH STEEL 1/2 HANGING 1/2 SHELVES( FD-1031 & 1033)

Removing UNSV shelves from almirah large steel & S & F new shelves made out of 1mm thick palain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed by Engr -in- Charge

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge. Make-GODREJ/HARRISON

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

Removing UNSV hanging rod & S & F new hanging rod 20 mm dia, 16 Gauge thick made of stainless steel conduit pipe with sockets complete all as specified and directed by Engr-inCharge.

M & L for denting & painting of Almirah large steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

ALMIRAH MEDIUM STEEL W/SHELVES : FD-1032

Removing UNSV shelves from almirah Medium steel & S & F new shelves made out of 1mm thick palain sheet fixed with appropriate clamps/screws/ nuts bolts complete all as specified and directed by Engr -in- Charge

Removing UNSV locks from almirah & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

Removing UNSV handle & S & F new steel anodized handles Godrej pattern with suitable bolts and all as specified and directed by Engr-in-Charge. Make-GODREJ/HARRISON

Removing UNSV locking assembly & S & F new locking assembly with cover complete all as specified and directed by Engr -in-Charge.

M & L for denting & painting of Almirah Medium steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

LOCKER BEDSIDE STEEL : FD-257

M & L for denting & painting of Locker steel both internally and externally with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing UNSV & S & F hasp & staples 75mm long as per drg complete all as specified and directed by Engr - in - Charge

Removing UNSV & S & F MS steel CP handles 100mm long as per drg complete all as specified and directed

Removing UNSV & S & F Stainless steel conduit pipe 20mm dia as a hanging rod 16 guage thick as per drg.complete all as specified and directed

Removing UNSV & S & F new shelves made out of 1mm thick plain sheet all as per drg complete all as specified and directed

TABLE OFFICE CLERK STEEL: FD-1004 & 84

Removing UNSV top & S & F New top made out of pre-laminated particle board 18mm thick exterior grade (CENTURYPLY/ACTION TESA/BHUTAN BOARD) as approved shade and 6mm thick first class teak wood edging fixed with all around the top & edging polishing with sprit polish matching the colour of top complete all as specified and directed by Engineer-in-Charge.

Removing UNSV & S & F new drawers made out of 1mm thick plain sheet shape and size all as per drawing complete all as specified and directed by Engineer-in-Charge.

Removing UNSV locks & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

M & L for denting & painting of Table office clerk steel to external surfaces and drawer & Drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing unsv & S & F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

TABLE OFFICE OFFICERS STEEL: FD-1003 & 84

Removing UNSV top & S & F New top made out of pre-laminated particle board 18mm thick exterior grade (CENTURYPLY/ACTION TESA/BHUTAN BOARD) as approved shade and 6mm thick first class teak wood edging fixed with all around the top & edging polishing with sprit polish matching the colour of top complete all as specified and directed by Engineer-in-Charge.

Removing UNSV & S & F new drawers made out of 1mm thick plain sheet shape and size all as per drawing complete all as specified and directed by Engineer-in-Charge.

Removing UNSV locks & S & F new 6 levers locks, Godrej pattern (Make-HARRISON/GODREJ/LINK), with duplicate and key & hole cover and all as specified and directed by Engr -in- Charge.

M & L for denting & painting of Table office clerk steel to external surfaces, cabinet and drawer & Drawer cabinet to external & internal surfaces with synthetic enameled paint of silver/ grey colour with spray gun after properly smoothening the steel surface with the help of Sand paper/ electric grinder,applying putty on dents and providing a coat of primer complete all as specified and directed by Engineer-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Removing unsv & S & F best quality hard rubber shoes to legs complete all as specified and directed by Engineer-in-Charge.

M & L for preparation of wooden surfaces of the following furniture by scraping with sand paper, redusting and apply putty whereever required and polishing the surfaces with french polish maching with existing colour to get glossy finish all as specified and directed by Engr-in-Charge.

M & L for removing unserviceable plywood from both side of Head board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Head board including 15mm wide 6mm thick teak wood round beeding providing for both side of head board and 35mm wide 4mm thick teak wood beeding for top of head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable plywood from both side of Foot board of Bed plywood top and S & F new 4mm thick plywood one side teak face ( Natural teak) to both side of Foot board including 15mm wide 6mm thick teak wood beeding providing both side of Foot board and 35mm wide 4mm thick teak wood beeding for top of the head board and all as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable long rail from Bed plywood top and S & F new long rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing unserviceable centre rail from Bed plywood top and S & F new centre rail made out of 1st class teak wood and made to shape and al as specified and as directed by Engr-in-Charge.

M & L for removing old unserviceable/ wornout existing plywood top from Bed plywood top and S & F new 12mm thick plywood BWR grade Type AA of size 1940 X 915mm approved make and fixing it by minimum 18 Nos 30mm brass screw for each bed and all as specified and as directed by Engr-in-Charge.

M & L for polishing of bed plywood top with french polish for obtaining glossy finish including preparation of wooden surfaces by scrapping with sand paper & apply putty whereever required and as directedby Engr-in-Charge.

SOFA SET 3 SEATER SINGLE PIECE-FD-281/1113 Removing UNSV & Supply & fixing the following existing wooden components from Sofa set 3 seater carefully without disturbing the adjoining parts made of first class teak wood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact complete all as specified and directed by Engineer-in-Charge.

Cushion 100 mm thick 40 density Make: Sleepwell/Kurlon (Kurlon Ltd) duly covered with tapestry cloth not less than Rs 350 per mtr quality and shade as approved by Engr-in-Charge./GE

Batten

Bearer

M&L for preparation of wooden surfaces of sof set 3 seater by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish two coats to get glossy finish all as directed by Engr-in-Charge.

SOFA CHAIR SINGLE SEATER WITH ARMS FD-281/1113 Removing UNSV & Supply & fixing the following existing wooden components from Sofa chair single seater with arms carefully without disturbing the adjoining parts made of first class teak wood well seasoned free from pits & knots including tightening the joints, pinning, screwing, nailing, wedging, glueing,placing every part in-tact complete all as specified and directed by Engineer-in-Charge

Cushion 100 mm thick 40 density Make: Sleepwell/Kurlon (Kurlon Ltd) duly covered with tapestry cloth not less than Rs 350 per mtr quality and shade as approved by Engr-in-Charge./GE

Batten

Bearer

M&L for preparation of wooden surfaces of sof set 3 seater by scraping with sand paper, redusting and apply putty wherever required and polishing the surface with french polish two coats to get glossy finish all as directed by Engr-in-Charge.

Repair of Bed Hard (MAP) :-

M & L for removing old unserviceable Ply wood top from Bed hard (MAP) and S & F new ply wood top 12mm thick BWR Gde type 'AA' of size 1900 x 850mm with suitable nut & bolt and All as specified and directed by Engr-in-Charge. Make of plywood - Greenply/Kitply/century ply.

M & L for welding to the broken long rail stiffiner & leg stiffiner of exsisting Bed hard (MAP) with suitable welding rod all as specified and directed by Engineer-in- Charge.

M & L for removing old unserviceable particle board from head board and foot board of Bed hard (MAP) and S & F new 18mm thick boath side laminated particle board exterior grade of size 640 X 200 mm for head board & 640 X 310 mm for foot board fixing with suitable steel screw and All as specified and directed by Engr-in-Charge. Make of particle board : CENTURYPLY/ACTION TESA/BHUTAN BOARD

M & L for preparation of steel surfaces by emery paper to Bed Hard (MAP) and applying one coat of synthetic enamel paint black colour approved make and all as specified and as directed by Engr-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

Repair of Charpoy IP Rectangular with ply top:-

M & L for removing old unserviceable Ply wood top from charpoy Iron pipe rectangular and S & F new ply wood top 12mm thick BWR Gde type 'AA' of size 1940 x 850mm with suitable nut & bolt and All as specified and directed by Engr-in-Charge. Make of plywood - Greenply/Kitply/century ply.

M & L for welding to the broken long rail stiffiner & leg stiffiner of exsisting Charpoy IP rectangula with suitable welding rod all as specified and directed by Engineer-in- Charge.

M & L for preparation of steel surfaces by emery paper to charpoy Iron pipe rectangula and applying one coat of synthetic enamel paint black colour approved make and all as specified and as directed by Engr-in-Charge. Make of Paint:-Berger/Asian paint/Jonson and Nicholson Paints.

BHARAT BUILDERS

L.BHIMSEN

Vinayak Distributors

M/s Ramdev Jangid

M/S Dharam Chand Lal Chand Jain

B.S Constructions