Annual Maintenance of residential and Non-residential buildings On the East Side of NH-66 in NMPT for the year 2020-21

Amount

BOQ Particulars

37.23 --- Removing and resetting Mangalore tiles and replacing broken ones wherever necessary (excluding cost of new tiles).

9.5 -- KSRB 9-2.4 Providing Jungle wood wrought and putup for purlins, common rafters and similar work including cost of materials, labour, HOM of machineries complete as per specifications. Specification No. KBS 9.27Jungle wood such as Nerale, Neem wrought and putup. Specification No. KBS 9.27

Supplying, Transporting & fixing new Mangalore tiles in posistion by removing the damaged tiles & disposing the debries with 300m lead including cost of labour, transportation, & all other incidental charges etc.complete.

Providing & fixing new ridge tiles, in C.M 1:2 and pointing with C.M 1:2 including removing damaged tiles & disposing the debreis within 300M lead incluidng cost & conveyance of all material, labour charges etc. complete as per specification -

Removing & resetting the dislocated ridge tiles in cement, lime, sand,in the proportion of 1:1:3 mix, disposing the debries with 300mm lead incluidng cost & conveyance of all material, labour charges etc. complete as per specification for - Ground Floor Buildings

Providingmortor band over manglaore roofing tiles of size 150x50mm in cement,lime& sand the proportion of 1:1:3 mix, disposing the debries with 300m lead incluidng cost & conveyance of all material, labour charges etc. complete as per specification

Providing and fabricating 50mm dia medium class G.I. pipe including, cutting, welding flange with bolt holes & ends sealed with M.S Plate applying 2 coats of Anti corrosive Steel paint over a coat of primer conveyance of all materials, transportation to work site, cost of Labour, all Tools & Plants, Bolts & Nuts for fixing, charges etc complete.

Providing & fixing 24 guageG.I. corrugated or plain sheet over the roof scantling using J or L bolt with washer incluidng cost & conveyance of all material, labour charges etc. complete as per specification - MSB

8.3 --- KSRB 8.3-1 : Providing and laying to required line and slope roofing with corrugated asbestos cement sheet 6mm. thick fixed with galvanised iron J or L hooks, bolts and nuts 8mm. dia C.I plain and bitumen washers over the existing purlins, rafters and trusses including cost of materials, labour, complete as per specifications. Specification No. KBS 8.5

Replacement of corroded G.I. sheet from valley gutter, removing lime mortor band and providing 18 guage G.I. sheet of approved quality and make fixing to the valley gutter fixing in existing condition including cost and conveyance of all materials, labour charges, etc. complete as per specification.

Supplying & fixing chimney pipe of approved quality and make including cost & conveyance all material, labour charges and T &P charges and all other incidental charges etc. complete as per specification. complete.

2.1 --- KSRB 2-1.1 :Earthwork in surface excavation in ordinary soil for levelling and lowering the ground manually (other than foundation of buildings, culverts, road drains and trenches of pipe lines and cables) and removing the excavated stuff to a distance not exceeding 50m and lift upto 1.5m, excavated surface levelled and neatly dressed, disposed earth to be levelled after breaking of clods and neatly dressed as per specifications.

4.6 --- KSRB 4-1.6: Providing and laying in position plain cement concrete of mix M15 with cement @ 240 kgs with 20mm and down size graded granite metal coarse aggregates @ 0.878cum and fine aggregates @ 0.459cum machine mixed, concrete laid in layers not exceeding 15 cms. thick, well compacted, in foundation and plinth, including cost of all materials, labour, HOM of machinery, curing complete as per specifications. Specification No. KBS 4.1, 4.2

4.19 --- KSRB 4.2.10 : Providing and laying in position reinforced cement concrete of mix M20 OPC cement @240 kgs, with 12mm and down size graded granite metal coarse aggregates @0.5175cum and fine aggregates @ 0.345cum,with superplastisiser @ 0.225lts, machine mixed, well compacted for plain chajja of 7.5cms average thickness, upto ground floor level, including cost of all materials, labour, HOM of machinery, finishing, curing, complete as per specifications. Specification No. KBS 4.1, 4.6

Construction of laterite size stone masonry in C M 1:6 using available stone curing etc complete as per specification FOR FOUNDATION (Cement = 45Kg)

Providing and constructing laterite size stone masonry including cost and conveyance of all materials curing etc complete as per specification FOR SUPER STRUCTURE in C M 1:6 (Cement = 45Kg/M3)

5.6 -- KSRB 5.2-3 : Providing and constructing granite / trap / basalt size stone masonry in foundation with cement mortar 1:6, stone hammerd dressed in courses not less than 20 cms high, bond stones at two m. apart in each course including cost of materials, labour, curing complete as per specifications.cement mortar 1:6, KBS 5.1.13

6.7 --- KSRB 6-2.4 :Providing and constructing burnt brick masonry with approved quality of non-modular bricks of standard size of class designation 50 (table moulded) with cement mortar 1:4 for basement and superstructure including cost of materials, labour charges, scaffolding, curing complete as per specifications. with cement mortar 1:4 Specification No. KBS 6.2

15.1 ... KSRB 15.1.1 Providing flush pointing to square rubble, course or uncoursed stone masonry with cement mortar 1:3, 20mm deep, after raking joints to depth of20mm nicely lining, including cost of materials, labour, curing complete as per specifications.

15.10 ... KSRB 15.3.2 Providing 12mm thick cement plaster in single coat with cement mortar 1:4, to brick masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

15.23 KSRB15-4.1 Extra for providing and mixing waterproofing compound in cement plaster work at one kg per bag or in the proportion recommended by the manufacturers, for cement mortar 1:3, 12mm thick cost of materials complete as per specifications.

Providing Cement Plaster floor finish with C.M 1:3, 20mm thick, with red/black oxide including preparation of the surface, laying, Finishing to achieve smooth, glossy surface of uniform colour, true to level & gradient, thread lining, curing, cost & conveyance of all materials, labour, T & P and all other incidental charges etc. complete including cost of Cement.

15.19 . KSRB15-3.11 : Providing 20mm thick cement plaster in single coat with cement mortar 1:4, to stone masonry including rounding off corners wherever required smooth rendering, : Providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications.

15.32 KSRB15-6 : Providing floating coat of cement to plastering and finishing smooth, including cost of materials, labour, curing complete as per specifications.

37.50 --- Dismantling plastering and removing the debris with a lead upto 200m

37.48--- Dismantling size stone masonry in clay mortar and stacking the size stone within a radius of 50m and removing the debris to a distance upto 200m

KSRB 14-17.2 : Providing skirting, dado, rises of steps with colour glazed tiles on 10mm thick cement plaster 1:3 and jointed with white cement slurry over rough plaster surface ( excluding cost of rough plastered surface which should be measured and paid separately ) using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications. Specification No.KBS 14.16, 14.17

14.17 ... KSRB 14.10-3: Providing flooring with 25mm to 40mm thick polished Cadapa slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mixed with pigment to match the shade of the slab, , including cost of materials, labour, curing, polishing complete as per specifications. Specification No. KBS

. KSRB 11-5 : Providing and fixing white vitreous china clay, water closet European type ( Pedestal type, P-trap ) with black solid plastic seat and lid, C.P brass hinges, rubber buffers. 10 litre low level, P.V.C flushing cistern ( all are approved make ) with fittings, C.I / M.S brackets, 40mm diameter flush bend with fittings and clamps, overflow arrangements with special and 25mm mosquito proof coupling of approved design, painting of fittings and brackets, cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

12.4 ... KSRB 11-4 : Providing and fixing white vitreous china clay, water closet Orissa pattern of size 580 x 440mm with integral type footrests, 100mm S orP trap, (approved make ) cutting and making good the wall and floor wherever required, including cost of materials, labour complete as per specifications. Specification No. KBS 11

12.113.1 Providing and fixing CI Nahani trap of approved make conforming to ISI specifications and construction of Cistern in CC 1:2:4 as per directions (Rate is inclusive of cost of materials and fixtures and conveyance of materials to work spot)- 10 cms x 7.5 cms.

Supplying & fixing CPB grating with frame of approved quality and make including cost & conveyance all material, labour charges and T &P charges and all other incidental charges etc. complete as per specification. complete.

Providing & fixing 2.5Kg/cm2 110mm PVC drainage pipes including cost of all materials, labour, curing and other incidental charges etc complete.

Providing & fixing 110mm SWR Y/T with inspection door including cost of all materials, labour, curing and other incidental charges etc complete.

Providing & fixing 110mm SWR elbow/tee including cost of all materials, labour, curing and other incidental charges etc complete.

Supply of 50mm PVC pipes of approved make and quality to the required alignment in the wall and below the ground including cement patch finish work with 1:3 mix curing etc. including cost & conveyance , labour T&P etc. complete.

Supply of 50mm SWR bendwith inspection door of approved make and quality including cement patch finish work with 1:3 mix curing etc. including cost & conveyance , labour T&P etc. complete.

Supply of 50mm SWR bend of approved make and quality including cement patch finish work with 1:3 mix curing etc. including cost & conveyance , labour T&P etc. complete.

Supply of 50mm SWR Y/T of approved make and quality including cement patch finish work with 1:3 mix curing etc. including cost & conveyance , labour T&P etc. complete.

Carefully dismantling door/window frame, hinge, fastenings and stacking all the materials & disposing the debries within a lead of 50mts including cost and conveyance of all materials, labour charges, etc. complete as per specification.

Carefully dismantling ventilator fastenings and stacking all the materials & disposing the debries within a lead of 50mts including cost and conveyance of all materials, labour charges, etc. complete as per specification.

Carefully dismantling door shutter, hinge, fastenings and stacking all the materials & disposing the debries within a lead of 50mts including cost and conveyance of all materials, labour charges, etc. complete as per specification

Carfully dismantling window shutter, hinge, fastenings and stacking all the materials & disposing the debries within a lead of 50mts including cost and conveyance of all materials, labour charges, etc. complete as per specification.

9.98 --- Providing and fixing RCC door frames factory manufactured, with C.C. 1:1 1/2 :3 reinforced with 3 Nos. of 6 mm dia. Main bars and 6 mm dia. Stirrups welded at 30 cm C/C, vibrating, curing including cost of steel and fabrication charges having 3 Nos. of hinges with 20mm x 3mm M.S. flat welded with required iron rods and flats with drilling and fixing 4 No.offlat screw nuts each in concrete for fixing hinges and making necessary provision in concrete for fixing aldrops, tower bolts etc., including cost of one coat of oil based enamel primer, 4 No.of hold fasts, 3 Nos. ISS Iron oxidised hinges necessary metal screws etc., complete. 60mm x 100 mm size-Door frames.

9.12 -- KSRB 9.4-3 : ProvidingMathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side clamps ),but including cost of materials, labour, HOM of machineries complete as per Specification specifica`tion No. KBS 9.33. Matti / Nandi wood frames Specification No. KBS 9.33

9.22--- KSRB 9-7.3 :Providing and fixing in position fully panelledMathi / Nandi wood class-II shutters for doors

9.73 -- KSRB 9-24.2 : Providing and fixing in position fully glazed windows shutters with Teak wood styles and rails of 25mm. thick, 75mm wide in single shutters with 4mm thick plain glass fixed with wooden beading including cost of materials, labour charges, HOM of machineries complete as per specifications. (excluding cost of fixtures) Specification No. KBS 9.34, 9.42Honne wood

9.54 -- KSRB 9-18.4 : Providing and fixing in position fully panelled shutters for windows with Honne wood styles and rails of 25mm. thick, 75mm wide in two halves with panels provided with NUWUD ( MDF ) of 18mm thick including cost of materials, labour charges, HOM of machineries complete as per specifications. ( excluding cost of fixtures ) Specification No. KBS 9.34, 9.26.3

16.19 -- KSRB 24-24 : Rewedging, cramping joinery of any description with new wedges in glue or white lead and repinning including rehanging or refixing of shutters, hinges or pivots, exceeding one sqm but not exceeidng two sqm per leaf, removing or dismantling excluding cost of wood but including cost of labour, complete as per specifications. Specification No.KBS

Providing & fixing hinges 100mm including cost and conveyanceof all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing hinges 75mm including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing stoppers including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing aldrop and locking arrangements including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixingaluminium tower bolt of 100mm including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing tower bolt 200mm including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing tower bolt 300mm including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing hook & eye including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing &fixing aluminium handles including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. Complete

37.55 --- Providing and fixing weld mesh 75 mm X 25 mm 6G X 10G

Easing of shutters of door

Easing of shutters of windows

37.33 Providing and fixing hydraulic door closures-Aluminium body

7.15.2 -- -Do- Providing, fabricating, assembling and fixing in position anodized aluminium partitions using aluminium sections of mat finish or glassy finish in combination of plain grove, single grove and double grove as per requirements for the frames of overall size 63.5mm x 38.1mm. with thickness of 2mm. having section weight, plain sections 1.054kg/m, single grove thickness 1.95mm. section weight 1.094kg/m, double grove thickness 1.9mm section weight 1.094kg/m and bottom member 114.3 mm. x 44.45mm. thickness 3.18mm. weight 2.646 kg/m; aluminium louvres section of size 36.5mmx34.93mm 1.45mm. thick section weight 0.429kg/m; bottom portions provided with 12mm. thick prelaminated sheet both sides of approved colour lamination exterior grade upto 0.9m height, spacing of vertical member not exceeding 0.6 m. c to c; sections are cut to the required lengths, joints mitered and corners grinded subdividing frames tennoned and rivetted to the frames; the assembled frame stiffened with corner angles, stripped and fixed with screws, rawl plugs and teak wood gutties to R.C.C.columns on sides, R.C.C. lintels or beams at top and floor at bottom, including cutting chistelling and making good with cement mortar to match the surface; providing and fixing 5.5mm. thick plain glass for middle portion viz., 0.9m. to 2.13 m. and top panel with louvres sections; the glass and panels fitted with glazing clips of 19mmx17.3mm. of thickness 0.9mm. weight 0.124kg/m, aluminium sections sections treated for removal of any rust and prevention of further rust formation, coated with greasy materials for non-adherence of mortars or any other sticky materials; vertical members embedded in the flooring by making suitable sized holes and fixing with cement mortar, with necessary opening for fixing of door of standard size ( excluding cost of door ) all the frame throughly cleaned, free from rust, scale or dirt including cost of materials, fixtures, labour and HOM of machinery complete as per specifications.usingaluminium section powdered to a minimum of 60 to 70 microns with exterior durable pure polyester grade powder of approved quality.

7.9 --- KSRB 7.9 : Providing and fixing M.S.grill work for windows and ventilators weighing 21kg/sqm using M.S. flats, or M.S. square rods, or combination of M.S. flats and square rods as per approved design, drawing including cutting steel sections and welding the same to required pattern with a coat of red lead primer, cost of materials, fixtures, labour and HOM of machinery complete as per specifications. Specification No. KBS 7.12

9.87 -- Supply and fixing of door shutters made of rigid PVC extruded hollow section (Nandi or equivalent) of 20mmx200mm with the wall thickness of 1.0mm+/-0.1mm equally divided into 4nos with tongue an groove locking arrangements. The shutter frame is made of 30mm x 79mm with the wall thickness of 1.5mm+/-0.15mm section metric cut and joined at 4 corners with 125mmx225mm plastic brackets. The shutter shall be horizontally reinforced with 2nos of 8mm PVC rods. Teak wood battons shall be reinforced inside the door shutter during the fabrication of the door shutter at those points wherever the hardware is fixed on to the door shutter.

15.38 KSRB 15.10.1 Providing white washing to new wall surface in two coats with lime of approved quality, to give an even shade including cost of materials, labour, complete as per specifications.

15.45 ... KSRB 15.12.2 Providing Gopicolour washing to new wall surface in one coat with lime and gopicolour of approved quality, to give an even shade after thoroughly brooming the surface to remove all dirt, dust, mortar drops and other foreign matter including cost of materials, labour, complete as per specifications.

15.50 ... KSRB 15-14.3 : Providing and applying one coat with oil bound washable distemper of approved brand and shade on wall surface to give an even shade after throughlybrooming the surface free from all grease, dirt, loose peases of scales, including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

15.60.1 ... KSRB 15-17.6 : Providing and applying painting two coats (excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade, cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

15.59 ... KSRB 15-17.5 : Applying priming coat over new wood surface and / or wood based surface after preparing the surface after throughly cleaning oil, grease, dirt and foreign matter, sand papering and knotting liquid wood filler, for varnish including cost of materials, labour, complete as per specifications.

15.61.1 ... KSRB 15-17.7 : Providing and applying painting one coat (excluding priming coat ) on new wood surface and / or wood based surface with enamel paint to give an even shade after cleaning the surface of all dirt, dust and foreign matter, sand papering including cost of materials, labour, complete as per specifications.

15.75 ... KSRB 15-18.3 : Providing and applying enamel metal paint one coat ( excluding priming coat ) on previously painted steel or other metal surface brushing to give an even shade after cleaning oil, grease, dirt and other foreign matter, including cost of materials, labour, complete as per specifications

15.52.1 ... KSRB 15-15.3 : Providing and applying painting in one coat with plastic emulsion paint of approved brand and manufacture on wall surface to give an even approved shade after throughly brushing the surface, free from mortar drops and other foreign matter including preparing the surface even and sand paper smooth, cost of materials, labour, complete as per specifications.

Servicing the collapisible gate and folding type shutters with minor repairs and rectification works including cost of all fixtures cost &conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Servicing the rolling shutters including removing and refixing the all fixtures greasing reconditioning to prOpnr functioning and rectification works including cost of all fixtures cost & conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing new laths of rolling shutters with replacing the damaged laths including painting with two coats of anticorrosive steel paint of approved colour including cost of all fixtures cost & conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing new bottom plate of rolling shutters with replacing the damaged bottom plates including painting with two coats of anticorrosive steel paint of approved colour including cost of all fixtures cost & conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing new guide of rolling shutters with replacing the damaged guide including painting with two coats of anticorrosive steel paint of approved colour including cost of all fixtures cost & conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

Providing & fixing new spring of rolling shutters with replacing the damaged guide including painting with two coats of anticorrosive steel paint of approved colour including cost of all fixtures cost & conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete

7.6 --- KSRB 7.6 : Providing and fixing top covers made out of 20 guage M.S. sheet over pull and push rolling shutters bent to shape including cost of red lead primer coat of painting , materials, labour, HOM of machinery complete as per specifications. Specification No. KBS 7.10.6 / 7.12

Resetting the non operativealuminium door shutter with replacing the hinge/pivot arrangements and making the shutter to easy Opnration including cost & conveyance of all material, labour charges and all other incidental charges etc. complete

Removal of debries from the work site for 2 KM including cost of tranportation& conveyance charges and all other incidental charges etc. complete as per specification

Supply of unskilled labour for mescellaneous works like, Cleaning of A.C sheet roofing, Cleaning and clearing canopy & roof slabs of multistoried buildings to avoid water leakage. And also for removing weeds and plants from multistoried buildings and other emergency unforeseen works .

Providing and fixing 4mm thick glass panes to steel windows including T.W. beading of 10 mm thick and 2 coats of approved paints.

2.4 --- KSRB 2-2.2 : Earthwork excavation for foundation of buildings, water supply, sanitary lines and electrical conduits either in pits or in trenches 1.5m and above in width, in hard soil not exceeding 1.5 m. in depth including dressing the bottom and sides of pits and trenches, stacking the excavated soil clear from edges of excavation with lead upto 50 m. after breaking of clods complete as per specifications. No. KBS 2.1(b) / 2.3.5

Providing & constructing New Inspection Chambers 450x 300 MM upto300 MM depth ( interior clear dimensions ) with 1060 x 910 x 100 MM thick P.C.C 1:3:6 Mix bed concrete, Non-Modular Brick Masonry 230 MM thick in C.M 1:6, Benching &Channelling in P.C.C 1:2:4 Mix 75 MM average thickness, and plastering inside &out side with C.M 1:3, 15mm thick P.C.C work using 20 MM graded metal including cost &conveyance of all materials cost of labour, T&P and all other incidental charges etc. complete as directed by the dept.

Providing & constructing Inspection Chambers 450x 450 MM upto450 MMdepth( interior clear dimensions ) with 1060 x 1060 x 100 MM thickP.C.C1:3:6 Mix bed concrete, Non-Modular Brick Masonry 230 MM thick in C.M 1:6, Benching &Channelling in P.C.C 1:2:4 Mix and plastering inside &out side 15cmsdepth with C.M1:3, 15 MM thick, allP.C.C works using 20 MM graded metal including cost & conveyance of all materials cost of labour, T&P and all other incidental charges etc.complete as directed by the Department.

Providing & constructing Inspection Chambers 600 x 450MM upto600 MM depth ( interior clear dimensions ) with 1210 x 1060 x 100 MM thick P.C.C 1:3:6 Mix bed concrete, Non-Modular Brick Masonry 230 MM thick in C.M 1:6,Benching &Channelling in P.C.C 1:2:4 Mix and plastering in side &out side 30cms depth with C.M :3, 20 MM thick, all P.C.C works using 15 MM graded metal including cost & conveyance of all materials cost of abour, T&P and all other incidental charges etc.complete

Conveying and fixing the precast RCC cover slabs from the departmental stores for the inspection chambers wherever found necessary including cost & conveyance of allmaterials,labour, T&P etc., complete(RCC slabs will be issued free of cost by the dept.)

Supplying of SFRC Cover and Frame 560mm (ID) Heavy Duty.

Cleaning & Removal of blokages in main lines between the two manholes with the Jet machine, grabber, and cessfollout side the security compound wall by mechanically including cost & conveyance of all materials ,labour,T&P, all leads &liftsand disposing the materials as directed by the dept.

Providing & fixing steel fan hooks, chipping the concrete and removing the old hook ,if already fixed, applying a coat of zinc primer on the exposed reinforcemnt bar, filling the openeig with cement concrete, after fixing the hook, including cost and conveyance of all materials, fixing charges, tools & plants and all other incidental charges etc. complete.

Maintaining the sewage lines between W.C., Bath, Kitchen, to manhole including cleaning of all inspection chambers and the branch lines to preventi the blockage in all the quarters and non residential buildings and attending sewage complaints to remove the blockage from all branch sewer lines connected to the Quartres and non residential buildings out side security compound including cost & conveyance of all materials,labour,T&P, all leads & lifts and disposing the materials as directed by the dept. for the year 2020-21

Supplying water in 12000 litre capacity tanker, by mechanically passing the water through the sewage lines to facilitate cleaning of lines, including cost and conveyance of water, cost of labour for filling, transportation and all other incidential charges etc. complete as directed by the department.

KSRRB M200-14.2 :Dismantling brick / tile work in cement mortar in foundation and / or upto 1.5 metres above ground level including sorting the dismantled materials disposal of unserviceable materials, stacking the serviceable materials, providing and removing scaffolding wherever necessary cost of all labour charges complete as per specifications. Specification No.KRBS 200-2 MOST Specification No. 202

KSRRB 800-11.1: Painting lines, dashes, arrows etc., on roads in two coats on new work with ready mixed road marking paint, conferming to IS 164 on bituminous surface including cleaning the surface of all the dirt, dust and other foreign matters, demarcation at site and traffic control involved including materials, labour complete as per specifications.i) over 10 cm in width MORTH Specification No 803

Providing & fixing hinges 125mm (Heavy Duty) including cost and conveyanceof all material, fixing charges, tools & plants and all other incidental charges etc. complete

KSRB 11-15.3 : Providing & fixing 453 X 357 mm rectangular shape mirror with plastic moulded frame of approved make and shade with 6mm thick hard board backing including cost of materials, labour, complete as per specification.

KSRB 4.9.2 : Providing T.M.T steel reinforcement for R.C.C work including strightening, cutting, bending, hooking, placing in position, lapping and/or welding wherever required, tying with binding wire and anchoring to the adjoining members wherever necessary complete as per design (laps, hooks and wastage shall no be measured and paid) cost of materials,labour, HOM complete as per specifications. Specification No. KBS 4.6.3 - TMT bars Fe 500

Providing and laying pervious concrete of mix M20 with OPC 320 kgs with 20mm size metal coarse aggregate at 0.69 cum and 12 mm size aggregates at 0.43 cum, hand mixed, laid in layer not exceeding 15 cms thick, well compacted for footpath, drain bed, all round building premises, parking area etc. including cost of all materials, labour, curing complete as per specifications.

KSRB 4-6.2 : Providing and removing centering, shuttering, strutting, propping etc., and removal of form work for suspended floors, landings, balconies and likes, thickness upto 200 mm including cost of all mateials, labour complete as per specifications. Specifications No. KBS 4.6.2 - 0 to 5 mts

Providing & fixing comode covers of size 17" x 15" including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete.

Providing & fixing Godrej/Europa or equivalent main door lock,including cost and conveyance of all material, fixing charges, tools & plants and all other incidental charges etc. complete.

KSRRB M200-13.2 Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonary, cement concrete, wood work steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unsrviceable material and stacking the sericable material with all lifts complete as per specifications, By Mechanical means

Credit for taking away Dismantled Door frame

Credit for taking away Dismantled Window frame

Credit for taking away Dismantled Door shutter

Credit for taking away Dismantled window shutter

Credit for taking away Dismantled Rolling Shutter laths

Credit for taking away Dismantled Rolling Shutter side guide

Credit for taking away Dismantled Rolling Shutter spring

Credit for taking away Dismantled Rolling Shutter top cover

Credit for taking away Dismantled Rolling Shutter bottom plate

SHEIKH FAIZAL AHAMED

MOONLIGHT ENTERPRISES