Constructing of Lathi Town Development, Garden Development with Operation and Maintenance of Garden (5-Year) and Smashan Mox Dham Development as per various Location Chart At, Lathi, Dist.: Amreli Under Swarnim Jayanti Chief Minister Urban Development scheme (UDP-88) Year-2025-26. (Second Attempt)

NAME OF WORK : CONSTRUCTING OF LATHI TOWN DEVELOPMENT, GARDEN DEVELOPMENT WITH

OPERATION AND MAINTENANCE OF GARDEN (5-YEAR) AND SMASHAN MOX DHAM DEVELOPMENT AS

PER VARIOUS LOCATION CHART AT, LATHI

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr.No. Schedule Amount

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

4 Schedule - "B"- 4

5 Schedule - "B"- 5

6 Schedule - "B"- 6

7 Schedule - "B"- 7

8 Schedule - "B"- 8

9 Schedule - "B"- 9

10 Schedule - "B"- 10

11 Schedule - "B"- 11

12 Schedule - "B"- 12

13 Schedule - "B"- 13

14 Schedule - "B"- 14

15 Schedule - "B"- 15

16 Schedule - "B"- 16

17 Schedule - "B"- 17

18 Schedule - "B"- 18

19 Schedule - "B"- 19

20 Schedule - "B"- 20

21 Schedule - "B"- 21

22 Schedule - "B"- 22

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_______Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 5,78,51,188=00 Put to Tender Rs. 5,78,51,188=00

Add ..............% Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Signature of the Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTING OF STONE PITCHING WORK WITH PAVING PATHWAY & LED LIGHT

LOCATION : AT - LATHI PALO TO CIRCLE TO BRIDGE, AT LATHI.

SCHEDULE - "B-1"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Clearing and grubbing road land including uprooting rank vegetation

grassbushes, shrubs, sapling and trees girth up to 300 mm removal

of stumps of trees cut earlier and disposal of unserviceable

materials (A) By manual means in area of light jungle

Earthwork for embankment including breaking clods, dressing with

all lead and lift and including watering rolling and consolidation of

subgrade in layers at O.M.C. to required dry density including filling

the depression which occur during the process using power roller 8T

to 10T. (E) From Borrow area within 3.0KM. lead 4705.00 177.91 Cumt

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated

stuff upto all lead and sretta 247.50 157.15 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to

63mm size all lead and lift 220.00 586.81 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling

the interstices to required camber and gradient (excluding spreading

of blindage) (i) 40mm size aggregates 220.00 262.23 Cumt

Supplying of Stone Dust all lead and lift 55.00 288.25 Cumt

Spreading blindage or road crust filling the gaps in metal and

leveling to camber and gradient as directed. (ii) Sand/Stone dust 55.00 154.84 Cumt

Providing and filling in foundation with ordinary Cement concrete M-

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete. 912.50 3345.58 Cumt

Providing and fixing pre cast Rubber Dye/ steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed/ vibrated mechanically and as per approved design

confirming to IS 15658:2006 including 35mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and

level asper guid lines of IRC: SP 63-2018 etc. complete. 2200.00 706.93 Sqmt

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of formwork and reinforcement for

reinforced concrete work in (B) Walls, from top of foundation

level upto floor two level 75.90 6356.94 Cumt

Providing and casting in situ ordinary cement concrete M-200 for

Kerbs/ Kerb blocks including formwork, curing and finishing

complete. 99.00 4115.75 Cumt

Providing and laying rubble stone soling 230mm thick including

hand packing and compacting etc. complete. 1384.40 409.05 Cumt

Labour charges for dry stone pitching of 22.5 cm. thick including

preparing the surface etc complete. 1384.40 325.71 Cumt

Pointing on Uncoursed stone masonry with cement mortar 1:3 (1-

cement : 3-coarse sand) (B) Ruled pointing 4614.70 112.90 Sqmt

Providing laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding

reinforcement for reinforced concrete work in : (C) Slab, landing,

shelves, balconies, Lintesl, Beams, Girders and cantilever upto

floor two level. 39.70 4796.49 Cumt

Providing and laying controlled cement concrete M.200 exposed

work with curing etc. Complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS:

(iii) Having cross-sectional area more than 0.12 Sq.M and upto

Providing TMT Bar FE500D reinforcement for R.C.C. Work

including bending, binding and placing in position complete upto

floor two level 22598.00 77.28 Kg

Steel work, welded in built up sections framed work including

cutting, hoisting, fixing in position and applying a priming coat of red

lead paint. (A) In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even

shade including cleaning the surface an even shade including

cleaning the surface of all dirt, dust and other foreign matter. 990.00 92.20 Sqmt

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) 913.00 195.42 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials. etc complete 913.00 120.26 Sqmt

Providing P.V.C. SWR pipes IS 13592 for water spouts 110mm dia

meter including necessary iron gratings as per drawings. 33.00 265.33 Rmt

4.00MT HT DECORATIVE LED STREET LIGHTING

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology asper IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80mm having 80-200 Micron

galvanising, Inner pipe dia of 40mm having 200-250 Micron

galvanising, connection terminal dia of 14mm with constant ohmic

value surrounded by highly conductive compound with high charge

dissipation suitable for following type of applications with chamber

and heavy duty cover (A) (approved make OEM has to submit test

certificate including value of earth resistance of installation duly

stamped and signed by agency and officer Incharge has to ensure

the value of earthing resistane mentioned in test certificate) &

having back filling compound of (

B) Inner chemical (CCM Compound) -Resistivity:- 0.2 ohm/ meter

testing asper IEC 62561-2017, Voltage drop:-<1 volt at no load &

dry form, Sulphar content:- <2%(C) Back fill Compound:- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted by Agency. [A] For

electrical installation up to 440 V Length of Pipe - 1 Mtr Back

filling compound - 1 Nos. of Bag of 15 Kgs. 1.00 5842.85 Ea.

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip

in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of

switch gear, conduit run or power plug etc. 1.00 685.79 Ea.

Supplying and erecting approved make Conical Pole (Medium Duty)

made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of

terminal plate of min 6mm Hylam sheet, standard profile 35mm x

7.5mm Din-Rail for MCB Mounting, stud type terminal and

arrangement for cable terminations as erected on suitable

foundation (included) with necessary GI nut-bolts/ J-Bolts. asper

details given by manufacturer considering site requirement. The

length of poles are as below.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm

thickness 37.00 6498.34 Ea.

Supplying and erecting Street light pole bracket comprising main B

Class GI pipe of 4.2 cm/ require outside dia. complete with suitable

B Class G.I. sleeve tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm/ require size of pole top having nuts and bolts for

fixing the brackets and having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one coat.of red oxide/

PU base primer and two coats of aluminium/ PU paint. paint with

following nos of arms. [A] Single Arm bracket 0.5 Mtr 37.00 491.87 Ea.

Supplying and erecting LED street light/ Flood light fittings with High

power White LEDs wattage of 3 watt and above assembled on

single MCPCB, efficiency more than 130 lm/w and corrosion free

High pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and poly

carbonate optics/ lenses, with toughened glass with company mark/

name engraved or embossed 160 to 270 V, Power Factor more

than 0.95, THD<10%, CCT 3000K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/ watt. LED driver efficiency> 85%

as per approved vender list make (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection -4KV integral and, Light must have

440VAC line supply with over-voltage protection.(i) above 36 to

48 Watts, Cat-lll 37.00 3345.12 Ea.

providing and erecting Miniature circuit breaker single pole 6A to

25A suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark, Cat.-III 37.00 112.11 Ea.

Supplying & erecting XLPE (IS:7098)(i)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size (E)

core 2.5 Sq.mm 148.00 137.36 Mt.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of

cables (a) 4 core 4 Sq.mm 555.00 117.16 Mt.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in

existing trench for laying of cable. below ground/ road surface for

enclosing cable (A) 50 mm dia 536.50 62.62 Mt.

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 529.10 55.55 Mt.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to

have appropriate erection to work uniform until erected with cement

concrete foundation and 45cm high bricks work finishing with plaster

etc. hinged double door internally supported on both side, with

internal and out side looking arrangement with look and keys in

duplicate 35 x 35 x 5mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated

paint. section pillar roof should be without joint with water leakage

proof & tested asper IP 55 test & followed by IS 2147 of 1962 (C)

X 30 X 45 cm section pillar fabricated from 16 Gauge MS Sheet

with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V

+ 5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required

with necessary connection erected as directed.

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections

& complete erected in existing 16 G.M.S. housing. ICS=100% of

ICU only - Cat III 1.00 6173.12 Ea.

Supplying and erecting approved make set of indicator lamps of

LED type lamp, lens cover, Bakelite holder complete erected with

necessary connections.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO

& 2 NC aux contacts complete with 415V/220V operating coil

suitable for (L&T, BCH,T.C., Siemens, C&S make). (a) for 25/ 32 A

rating 1.00 3253.21 Ea.

SEATING BENCHES

Providing & Fixing Cast Iron powder coating garden bench capicity

seater and finishing & fixing as per instruction etc. complete.

Specification: 3 Seater Seating Capacity, decorative legs design,

powder coating finish, with back & arm rest, 150 kg weight bearing

capacity.Material: Side frame cast iron, Mild steel pipe 14 gauge

seat & back rest material. Dimension: 654mm Total Height, 327mm

Seat Height, 520mm width, 1501mm Seat Wide, 1 Year warranty

period with including all types of tax, loading, unloading,

transportation, etc. 37.00 8080.00 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK CAUSEWAY (145.00 X 10.00MT) WITH APPRO. RCC ROAD

LOCATION : AT - LATHI AMRELI ROAD TO LILIYA ROAD, BHINGRAD POOL, AT. LATHI, DIST.: AMRELI

SCHEDULE - "B-2"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated stuff

up to all lead. (B) Dence or Hard Soil 381.00 157.15 Cumt

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated stuff

up to all lead. (C) Hard Murrum 190.50 268.92 Cumt

Supplying of crushed stone aggregates, chippings etc. of machine

cut stone of 40mm size free of disintegrated pieces, deleterious and

organic matter (for butumen surface dressing etc.) and grading as

per I.R.C. Code. All lead and lift 342.50 680.53 Cumt

Supplying of Stone Dust all lead and lift 85.61 366.93 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling

the interstices to required camber and gradient (excluding spreading

of blindage) (i) 40mm size aggregates 342.45 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling

to camber and gradient as directed. (ii) Sand/Stone dust 85.61 154.84 Cumt

Rolling and consolidating water bound macadam (Except laterite and

kankar) including watering not exceeding 150mm thickness (main

layer including binding materials) including filling in depressions

which occur during the process. (A) With power roller 3424.50 15.87 Sqmt

Providing and filling in foundation with ordinary cement concrete M-

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete. 358.40 3345.58 Cumt

Providing and casting in situ ordinary cement concrete M- 250 for

average 75mm thick wearing coat laid as directed including temping,

vibrating finishing, curing and filling in joints with bitument complete

Providing and casting in situ controlled cement concrete M-250 for

R.C.C. Return as per drawings including centering shuttering,

scaffolding where necessary, laying vibrating, curing and finishing

complete. (A) Height from 0.0 to 5.0 M. (1) Piers, (2) Abutment,

RCC Return 442.90 5084.34 Cumt

Providing and casting in-situ controlled cement concrete M-250 for

kerb/kerb blocks including formwork curing and finishing complete 20.10 4725.79 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level

Providing formwork of ordinary timber planking so as to give a rough

finish including centering shuttering strutting and propping etc. height

of propping and centering below supporting floor to ceiling not

exceeding 4M. and removal of the same for in situ reinforced

concrete and plain concrete work in. (C) Vertical surface such as

walls (any thickness) partitions and the like including attached

buttresses & string course & the like. 1771.90 243.86 Sqmt

Filling in foundation and plinth with murrum or selected soil in layers

of 20cm. Thickness including watering, ramming and consolidating

etc. complete. 1597.30 301.77 Cumt

Supplying and fixing reinforced concrete heavy duty non-pressure

pipes with collars for culverts including setting and joining the pipes in

C.M. 1:2 watering and laying (To level of slops of I.S. 458/

Class NP3 casted by vertically vibrated technology of following

internal diameter. (v) 900mm dia. 935.00 3271.56 Rmt

Providing and fixing post and pipe railing as per detailed drawing

including 3 coats of painting to steel works complete. 290.00 1214.22 Rmt

Providing P.V.C. SWR pipes IS 13592 for water spouts 110mm dia

meter including necessary iron gratings as per drawings. 28.80 265.33 Rmt

Providing & Erecting LED Street Light

Supplying and erecting approved make Conical Pole (Medium Duty)

made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759,

with required base plate and integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mm x 7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/ J-Bolts. asper details given by manufacturer

considering site requirement. The length of poles ar e as below.

(C) 5 Mtr. Long 70mm Top X 145mm bottom dia, 3mm thickness. 12.00 8145.65 Ea.

Supplying and erecting Street light pole bracket comprising main B

Class GI pipe of 4.2 cm/ require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm/ require size of pole top having nuts and bolts for

fixing the brackets and having spread of 0.5 mtr. Length with

deg.with vertical plane and suitable welded stiffener reducer and

nipple with check nut complete painted with one coat.of red oxide/

PU base primer and two coats of aluminium/ PU paint. paint with

following nos of arms. [A] Single Arm bracket 0.5 Mtr 12.00 491.87 Ea.

Supplying and erecting LED street light/ Flood light fittings with High

power White LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder

coated and heat sink extruded aluminium with diffuser and poly

carbonate optics/ lenses, with toughened glass with company mark/

name engraved or embossed 160 to 270 V, Power Factor more than

0.95, THD<10%, CCT 3000K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/ watt. LED driver efficiency> 85% as

per approved vender list make (fittings required LM-79 & LM-80

certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown.) (A) Street Light

(IP-65), Surge protection -4KV integral and, Light must have

440VAC line supply with over-voltage protection. (ii) above 36 to

48 Watts, Cat-lll 12.00 3345.12 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box. confirming to IS

8828/1996 with ISI Mark, Cat.-III 12.00 112.11 Ea.

Supplying & erecting XLPE (IS:7098)(i)-88 ISI unarmoured copper

cable 1.1 KV grade to be erected as directed of following size (E)

core 2.5 Sq.mm 60.00 136.35 Mt.

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of

cables (a) 4 core 4 Sq.mm 180.00 117.16 Mt.

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground/ road surface for enclosing

cable (A) 50 mm dia 174.00 62.62 Mt.

Making trench in soft soil of suitable width of 90 cm deep for laying

cable or locating the fault all over the run and back filling the same

and making the surface as normal ground. 170.40 55.55 Mt.

Supplying & erecting IP 55 grade following size section pillar

fabricated from joint less M.S. Sheet with angle iron legs made from

jointless M.S. Angle with cable clamps to be buried in ground to have

appropriate erection to work uniform until erected with cement

concrete foundation and 45cm high bricks work finishing with plaster

etc. hinged double door internally supported on both side, with

internal and out side looking arrangement with look and keys in

duplicate 35 x 35 x 5mm M.S. Angle of Two Nos. one is welded and

other with nut and bolt for erecting Bakelite sheet. Painting the

Section Pillar inside and out side with three tank powder coated paint.

section pillar roof should be without joint with water leakage proof &

tested asper IP 55 test & followed by IS 2147 of 1962 (C) 60 X 30 X

45 cm section pillar fabricated from 16 Gauge MS Sheet with

angle iron legs 45 cm long made from 35 X 35 X 5 mm thick MS

angle. 1.00 1884.66 Ea.

Supplying & erecting approved make Digital time switch having

lithium cell 6 years operative and operate battery backup 1 channel

day clock with 14 memory programme, suitable to operate on 240V +

5%, 16A with, floating contacts Minimum switching setup time

minimum & LCD display. Also comprised permanent ON/OFF

switching. Programming switches & housed in fire proof

thermoplastic enclosure & transparent cover erected as required with

necessary connection erected as directed.

Approved make Four pole moulded case circuit breaker having

breaking capacity ICU of 25 KA. at 415 V,having normal current

rating up to 25 A to 100A. with Fixed thermal & magnetic release

suitable to work on A.C. supply 50 c/s. with all internal connections &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU

only - Cat III 1.00 6173.12 Ea.

Supplying and erecting approved make set of indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with

necessary connections. 1.00 43.43 Ea.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

2 NC aux contacts complete with 415V/220V operating coil suitable

for (L&T, BCH,T.C., Siemens, C&S make). (a) for 25/ 32 A rating 1.00 3253.21 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTING OF STONE PITCHING WORK

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-3"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Earthwork for embankment including breaking clods, dressing with

all lead and lift and including watering rolling and consolidation of

subgrade in layers at O.M.C. to required dry density including filling

the depression which occur during the process using power roller 8T

to 10T. (E) From Borrow area within 3.0KM. lead 1653.30 177.91 Cumt

Excavation for foundation up to 1.5 mt. depth including sorting out

and stacking of useful materials and disposing of the excavated stuff

upto all lead and sretta 90.00 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete. 174.00 3345.58 Cumt

Providing and casting in situ ordinary cement concrete M-200 for

Kerbs/ Kerb blocks including formwork, curing and finishing

complete. 34.10 4115.75 Cumt

Providing and laying rubble stone soling 230mm thick including hand

packing and compacting etc. complete. 298.80 409.05 Cumt

Labour charges for dry stone pitching of 22.5 cm. thick including

preparing the surface etc complete. 298.80 325.71 Cumt

Pointing on Uncoursed stone masonry with cement mortar 1:3 (1-

cement : 3-coarse sand) (B) Ruled pointing 995.90 112.90 Sqmt

Providing laying controlled cement concrete M-200 and curing

complete including the cost of form work but excluding

reinforcement for reinforced concrete work in: (C) Slab, landing,

shelves, balconies, Lintesl, Beams, Girders and cantilever upto

floor two level. 8.60 4796.49 Cumt

Providing and laying controlled cement concrete M.200 exposed

work with curing etc. Complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in (A) BEAMS:

(iii) Having cross-sectional area more than 0.12 Sq.M and upto

Providing TMT Bar FE500D reinforcement for R.C.C. Work including

bending, binding and placing in position complete upto floor two level

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead

paint. (A) In beams and joists, channels angles Tees, flats, with

connecting plates or angle cleats as in main and cross beams. Hip

and jack rafters, purlins conneted to common rafters and the like

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign matter. 7.10 92.20 Sqmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF PAVING BLOCK PATHWAY

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-4"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation upto 1.5mt depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 151.70 157.15 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 289.70 586.81 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (i) 40mm size aggregates 289.70 262.23 Cumt

Supplying of Stone Dust all lead and lift 72.50 288.25 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (ii) Sand/Stone dust 72.50 154.84 Cumt

Rolling and consolidating water bound macadam (Except laterite and

kankar) including watering not exceeding 150mm thickness (main layer

including binding materials) including filling in depressions which occur

during the process. (A) With power roller 2896.10 15.87 Sqmt

Providing and fixing pre cast Rubber Dye/ steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed/ vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guid lines of IRC : SP 63-2018 etc. Complete. 1339.30 706.93 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length, 30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3 (1cement : 3 fine sand)

etc complete. 594.40 374.92 Rmt

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level

upto floor two level 26.50 6356.94 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. Work including

bending, binding and placing in position complete upto floor two level. 1855.00 77.28 Kg

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like 28.99 9108.48 Qtl

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 170.60 92.20 Sqmt

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 318.60 195.42 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete 314.60 120.26 Sqmt

Providing P.V.C. SWR pipes IS 13592 for water spouts 110mm dia

meter including necessary iron gratings as per drawings. 18.90 265.33 Rmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- PROVIDING & ERECTING VARIOUS TYPE OF CHILDREN PLAY EQUIPMENTS

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-5"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Providing & Erecting various type of following children play ground

equipment as per standard manufacture and as per direction by

municipality Incl. cost of required size foundation with cement concrete

1:2:4 (1: cement: 2 coarse sand: 4-20mm nominal size crushed stone

aggregate) with curing etc. complete asper directed by Engineer-in-

charges. The work included all type of labour, Installation charges,

Material charges, transportation charges. MULTI PLAY STATION (18 X

15 X 12 FT) (Drawing is attached herewith in separate sheet) 1.00 196950.00 Ea

MULTI PLAY STATION (15 X 13 X 12 FT) (Drawing is attached

herewith in separate sheet) 1.00 136350.00 Ea

2 SLIDE UNIT (5 X 15 X 8 FT) (Drawing is attached herewith in

separate sheet) 1.00 80800.00 Ea

SPIRAL SLIDE (08 X 07 X 08FT) (Drawing is attached herewith in

separate sheet) 1.00 84335.00 Ea

2 SEATER U TYPE SWING (08 X 04 X 08 FT) (Drawing is attached

herewith in separate sheet) 1.00 36865.00 Ea

3 SEATER U TYPE SWING (10 X 04 X 08FT) (Drawing is attached

herewith in separate sheet) 1.00 47975.00 Ea

ROUND SWING (15 X 15 X 08FT) (Drawing is attached herewith in

separate sheet) 1.00 81810.00 Ea

CIRCULAR SWING (07 X 07 X 07 FT) (Drawing is attached herewith

in separate sheet) 2.00 65145.00 Ea

MONKEY CLIMBER (03 X 07 X 07 FT) (Drawing is attached herewith

in separate sheet) 2.00 38885.00 Ea

SPRING RIDER (03 X 02 X 03 FT) (Drawing is attached herewith in

separate sheet) 2.00 8585.00 Ea

SPRING RIDER (03 X 02 X 03 FT) (Drawing is attached herewith in

separate sheet) 2.00 8585.00 Ea

4 SEATER SEE SAW (06 X 03 X 03 FT) (Drawing is attached

herewith in separate sheet) 2.00 22725.00 Ea

MARY GO ROUND (4FT DIA) (Drawing is attached herewith in

separate sheet) 2.00 34845.00 Ea

08 SEATER MARY GO ROUND (5FT DIA) (Drawing is attached

herewith in separate sheet) 2.00 47975.00 Ea

SEATING BENCHES

Providing & Fixing Cast Iron powder coating garden bench capicity

seater and finishing & fixing as per instruction etc. complete.

Specification: 3 Seater Seating Capacity, decorative legs design,

powder coating finish, with back & arm rest, 150 kg weight bearing

capacity. Material: Side frame cast iron, Mild steel pipe 14 gauge seat &

back rest material. Dimension: 654mm Total Height, 327mm Seat

Height, 520mm width, 1501mm Seat Wide, 1 Year warranty period with

including all types of tax, loading, unloading, transportation, etc. 20.00 8080.00 Ea

Providing & Fixing Dustbin Outdoor Twin Wast Bins of Capicity 80x2ltr.

Detail Given as per instruction etc. complete. Specification: Ground

anchored-bins fixed on poles, 2 Bins mounted with 1 central pole,

liter capacity of each bin, HDPE material of container, Powder coated

material, Non perforated, Green & blue colour, 2mm th bin wall, 25mm

pole diamt, 1.2mm th pole pipe, 1 Year warranty period with including all

types of tax, loading, unloading, transportation, etc. 5.00 3232.00 Ea

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF LOW HT COMPOUND WALL WITH GI GRILL WITH MAIN GATE

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-6"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

LOW HT COMPOUND WALL WITH GI GRILL WITH MAIN GATE

Excavation for foundation up to 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 38.70 157.15 Cumt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 16.70 3345.58 Cumt

Providing and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (B) Walls, from top of foundation level

upto floor two level 40.40 6356.94 Cumt

Provinding and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

Columns and Mass concrete. 1.20 4432.01 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMN (ii) Having

cross sectional area more than 0.08 Sq.mt.and upto 0.12 Sqm. 1.10 12328.73 Cumt

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 3012.00 77.28 Kg

Providing and fixing 0.90 mt High GI chain link Mesh wire with

Metre long GI Pipe posts 50mm x 50mm x 3mm and primer with oil

painting 3 coats fixed at 2.50 Mt, c/c. With 40 x 40x 6mm GI Angle

frame in welding mesh wire 3.00mm (10swg) (3" x 3"/ 75 x 75mm gape)

galvanised steel wire weighting 1.36 kg. per Sq.mt, stained and fixed to

posts with G.I. staples including fixing on wall top and complete &

direction by engineer-in-charge. 57.00 2960.31 Ea.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto floor

two level and finished even and smooth in (i) Cement mortar 1:3 (1-

cement:3-sand) 271.70 195.42 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete 271.70 120.26 Sqmt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 4.70 301.77 Cumt

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like 15.52 9108.48 Qtl

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brushing, interior to give an even

shade including cleaning the surface an even shade including cleanicn

the surface of all dirt, dust and other foreign matter. 87.10 92.20 Sqmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF BEAUTIFICATION

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-7"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

BEAUTIFICATION WITH GREEN LAWN & PLANTATION

Clearing and grubbing road land including uprooting rank vegetation

grass bushes, shrubs, sapling and trees girth up to 300mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (D)

By mechanical means in area of thorny jungle. 0.70 34889.38 Hec

Excavation for foundation upto 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 4.70 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 4.70 3345.58 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg. /Sq.cm. in foundation and plinth in Cement

mortar 1:5 (1-Cement: 5-fine sand) (B) Conventional 11.30 4245.09 Cumt

Providing 15mm thick cement plasterin single coat on Rough (Similar)

side of single or half brick walls for interior plastering up to floor two level

and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) 468.70 195.42 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(twocoats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete. 375.10 120.26 Sqmt

Providing and laying Kota stone slab 25 mm. Thick in risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. 40.70 1109.07 Sqmt

Providing, Supplying & Spreding Bhogavo Sand including all labour

charges, loading, unloading, transportations and all taxes etc complete

as per directed by engineer in charges. 75.20 1818.00 Cumt

Supplying of crushed stone aggregates, chippings etc. of machine cut

stone of following nominal size free of disintegrated pieces deletarious

and oraganic mater (for Bitumen surface dressing etc.) and grading as

per I.R.C. Code.(vi) 10mm 129.50 589.37 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (iv) Chipping varying from 6mm to 25mm size. 129.50 262.23 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 129.50 301.77 Cumt

Supplying and stacking of good earth at site including royalty and

carriage upto 5 km lead complete (earth measured in stacks will be

reduced by 20% for payment) 280.80 520.75 Cumt

Mixing earth and sludge or manure in the required proportion specified

or directed by the Officer-in-charge. 280.80 36.91 Cumt

Supplying and stacking of well decayed cattle manure at site including

royalty and carriage upto 5 k.m.lead complete (Cattle manure measured

in stacks will reduced by 8% for Payment) 45.30 249.97 Cumt

Tree Plantation: Digging holes in ordinary soil and refilling the same with

the excavated earth mixed with manure or sludge in the ratio of 2:1 by

volume (2 parts of stacked volume of earth after reduction by 20%:

part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any,

with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) 2.14.3 Holes 60 cm dia, and 60 cm

deep 10.00 44.18 Ea.

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal

of unserveiceable material’s as per direction of officer in charge

(excluding cast of plant & water) Trees Plant 10.00 7.37 Ea.

Providing New decorative Tree outdoor plants etc.incl. all labour

charges, transportation charges and material charges 10.00 239.37 Ea.

Shrub Plantation: Digging holes in ordinary soil and refilling the same

with the excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by 20% :

part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any,

with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) 2.14.4 Holes 45 cm dia, and 45 cm

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal

of unserveiceable material’s as per direction of officer in charge

(excluding cast of plant & water) Shrubs Plant 500.00 3.68 Ea.

Providing New Plantetion for Flower tree, Decorative outdoor plants

etc.including The work including cost of all materials, labour, plantation

with expertise, tranportation, loading, unloading, all taxes etc. complete

with Three years operation and maintanance after the plantation. The

work carried out as per directed by Engineer-in-charge.. Kashmiri

Gulab, Red Jasud 140.00 45.45 Ea.

Vasant Mori, Hemeliya 140.00 56.56 Ea.

Movari 75.00 39.39 Ea.

Parijat 75.00 67.67 Ea.

Karen 70.00 102.01 Ea.

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on

terrace 2000.00 3.95 Lit

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe (SCH- 40) for cold water including fittings as approved by engineer

in charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 525.00 72.65 Rmt

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 50.00 119.15 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.

(D) 32mm dia. 5.00 314.72 Each

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap 25.00 407.42 Each

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. Class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete. (B) 150mm 150.00 250.54 Rmt

Providing and fixing S.W. Gully trap with C.I. Grating brick masonry

chamber and water tight C.I. Cover with frame of 300mm x 300mm size

(inside) with standard weight. (i) Square mouth traps. (B) 150mm x

100mm size P or R type 10.00 1246.91 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF TOILET BLOCK

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-8"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5mt depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 37.00 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-100 mix

and providing necessary vertical pin headers including formwork, vibrating,

ramming and curing complete. 5.10 3345.58 Cumt

Provinding and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of Columns

and Mass concrete. 4.90 4193.52 Cumt

Providing and laying controlled cement concrete M-200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for RCC work in : (A) BEAM (i) Having cross sectional area

Providing and laying controlled cement concrete M-200 exposed work with

curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for RCC work in : (B) COLUMN (i) Having cross sectional

area more than 0.05 Sq.mt.and upto 0.08 Sqm. 1.90 14145.05 Cumt

Providing laying controlled cement concrete M-200 and curing complete

including the cost of form work and reinforcement for reinforced concrete

work in : (C) Slab, landing, shelves, balconies, Lintesl, Beams, Girders

and cantilever upto floor two level. 4.60 6464.00 Cumt

Providing TMT Bar FE 500D Reinforcement for RCC work and bending,

binding & placing in position complete up to floor two level. 1622.50 77.28 Kg

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 23.40 301.77 Cumt

Brick work using common burnt clay building brick having crushing strength

not less than 35 Kg/Sqcm. in cement mortar 1:5 (1 cement : 5 fine sand) for

brick work in super structure above plinth level upto floor two level (B)

Conventional 18.90 4526.81 Cumt

(i) Half brick masonary in common brunt clay building brick having crushing

strength not lass than 35 Kg/Sqcm. in cement mortar 1:4 (1 cement :

coarse sand) in in super structure above plinth level up to floor two level

(B) Conventional 14.20 684.26 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round square

or round bars with round headed bolts and nuts or by screws. (A) Plain grill.

Applying priming coat of over new steel and other metal surface after and

including preparing the surface by thoroughly cleaning, oil grease, dirt and

other foreign mater and scoured with brushes fine steel wool, scrapers and

sand paper with ready mixed priming paint brushing red lead. 3.00 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other metal

surface with enamel paint, brusing interior to give an even shade including

cleaning the surface an even shade including cleaning the surface of all dirt,

dust and other foreign matter. 3.00 92.20 Sqmt

Providing 15 mm thick cement plaster in single coat on Rough (Similar) side

of single or half brick walls for interior plastering upto floor two level and

finished even and smooth in finishing with a floating coat of neat cement

slurry. (i) cement Mortar 1:3 (1 cement : 3 Sand) 137.70 246.04 Sqmt

Providing 20mm thick double coat mala cement plaster on interior brick/

concrete work for plastering comprising of base coat of 12mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and

8 mm thick top coat of cement mortar 1:2 (1 Cement: 2 Coarse sand)

finished with trovel including scaffolding curing etc. complete. 105.00 283.95 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja. 25.10 43.04 Rmt

Wall painting (two coats) with plastic emulsion paint of approved brand and

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter

and sand papered smooth. 137.70 82.85 Sqmt

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall Surface

(Two Coats) to give an required shape even shade after throughly brushing

the surface to remove all dirt, and remains of loose powdered materials etc.

complete. 105.00 120.26 Sqmt

Providing and laying Marble stone slab flooring over 20mm (average) base

of cement mortar 1:6 (1-cement : 6-coarse sand) and jointed with grey

cement slurry including rubbing and polishing complete. (A) Marble slab

25mm thick 18.10 2231.50 Sqmt

Providing and laying Coloured glazed tiles of he size 300mm x 200mm x

8mm/ 300mm x 450mm x 8mm in skirting, risers of steps and dedo on

mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry. 107.00 1488.23 Sqmt

Providing and fixing flush door shutters, solid core construction with frame

of first class hard-wood with cross band and face veneer or plywood face

panels, including anodized aluminium butt hinges with necessary screws.

(B) Non-decorative type and black board core anodized aluminium butt

hinges in flush door shutters. (2) 35 mm. Thick 8.80 1829.73 Sqmt

Providing & Fixing standard extruded of alluminium Section of size 63mm x

38.10mm x 1.2mm (Jindal Section 2434, @ Wt. 0.643 Kg./mt. with colour

Powder Coated Alluminium Frame for Ventilation with 5mm thick frosted

glass as details etc. complete for Ventilation. 3.00 1175.56 Sqmt

PLUMBING & SANITARY FITTINGS :

Providing erecting fixing double coated ISI water tank of required capacity

each with all necessary fittings & connection etc. complete on terrace. 1000.00 3.95 Lit

Providing, laying and jointing in true line and level 25mm dia. U.P.V.C. pipe

(SCH-40) for cold water including fittings as approved by Engineer-in-

charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter c/c or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 75.00 91.84 Rmt

Providing, laying and jointing in true line and level 32mm dia. U.P.V.C. pipe

(SCH-40) for cold water including fittings as approved by Engineer-in-

charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter c/c or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 30.00 119.15 Rmt

Providing, laying and jointing in true line and level 40mm dia. U.P.V.C. pipe

(SCH-40) for cold water including fittings as approved by Engineer-in-

charge. Pipe shall be fixed on the wall with the help of clamp at every two

meter c/c or shall be concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials. 20.00 148.11 Rmt

Providing, laying and jointing in true line and level 110mm diametre

U.P.V.C. (Type B) pipe Conforming to IS 13592-1992 with one end plain

and other end socketed with rubber ring & fittings comforming to ISI : 14735-

1999 of approved make for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be fixed on wall using of

PVC clamp of the size 110mm diameter x 149mm length x 145mm high at

every 2000mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipe and joints and jointed with adhesive solvent cement including cost of all

materials. 25.00 876.90 Rmt

Providing and fixing wash down water closet (European type, W.C. Pan)

with integral P or S trap including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and

paid for separately) (A) vitreous China Pattern :(i) in colour 3.00 1356.91 Each

Providing and fixing plastic seat and cover for wash down water closer with

C.P. brass hinges and rubber buffers. (B) Black plastic seal and cover. 3.00 291.33 Each

Providing and fixing chromium plated brass half trun flush cock of approved

quality including fixing in pipe line etc. complete.(ii) 25mm dia. 7.00 263.77 Each

Providing and fixing Jet Spray Heavy duty with S.S. Braided hose 60 cm

long with including fittings. 3.00 308.99 No

Providing and fixing Bib Cock 15mm Heavy duty with cap including fittings. 5.00 400.57 No

Providing and fixing wash basin with single hole for pillar tap with C.I. or

M.S. brackets painted white including sutting holes and making good the

same but excluding fittings.(A) Vitreous China:(ii) Flat Back washbasin

mm x v 400mm size. (i) In white colour. 3.00 1484.89 Each

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 3.00 78.75 Each

Providing and fixing pillar tap, capstan head, screw down high pressure

with screws, shanks and back nuts. (i) 15mm dia. 3.00 308.72 Each

Providing and fixing chromium plated, bottle trap with necessary couplings

of approved quality for wash basin. 3.00 295.79 Each

Providing and fixing C.P. brass waste for wash basin or sink. (A) 32mmdia. 3.00 67.91 Each

Providing and fixing Urinal of approved quality including connection with trap

and with integral longitudinal flush pipe. (A) Squating plate pattern white

earthenware 550mm x 300mm. 4.00 1631.87 Each

Providing and fixing 600mm x 450mm Mirror of superior glass mounted on

6mm th. A.C. sheet or plywood sheet and fixing to wooden plug with C.P.

brass screws and washers. 3.00 859.40 Each

Providing and fixing Gun metal check or non-return fullway wheel valve. (C)

25mm dia. 2.00 420.83 Each

Providing and fixing Gun metal check or non-return fullway wheel valve. (E)

40mm dia. 2.00 663.42 Each

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain- 100mm

diameter with jali of the following nominal diameter of self cleansing design

with C.I. Scrwed down or hinged grating inlcuding the cost of cutting and

making good the walls. 4.00 586.27 Each

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber

and water tight C.I. cover with frame of 300mm x 300mm size (inside) with

standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. 2.00 1292.19 Each

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor. (F) 75mm 2.00 280.23 Each

Electrical Fittings :

Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10mtr length, in below type of pipe erected with

6A Modular type switch/ bell push & accessories and earth continuity of

following type, erected on PVC/ Metallic/ Wooden box, single mounting

base frame covered with textured/ metallic/ white front plate modules

erected on/ in wall/ ceiling as per pipe erected, with necessary Lamp holder/

ceiling rose/ H.D. Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected flushed

on wall/ ceiling complete. Cat. III 16.00 449.45 Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10mtr length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC/ Metallic/ Wooden box

covered with appropriate front plate modules erected on/ in wall/ ceiling as

per pipe erected with following type of accessories. [II] For 16A Plug and

16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected flushed

on wall/ ceiling complete. Cat-III 6.00 711.04 Pt.

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin

socket erected on PVC/ Metallic/ Wooden box, single mounting base frame

covered with textured/ metallic /white front plate modules erected on/ in wall/

ceiling with following type accessories. Cat-III 4.00 257.55 Pt.

Supplying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection, Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (iv) 16 to 20 watts, Cat. III 16.00 258.56 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

KA to be erected in existing box. confirming to IS 8828/1996 with ISI Mark.

Cat-III 2.00 112.11 Ea.

Providing & erecting 240 V MCB double pole switch for motor & inductive

load (C Curve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (A) 6 to 32 Amp., Cat. III

Supplying & erecting earth pit of minimum bore dia. 150mm size approved

make Earthing Electrode consisting Pipe-in-Pipe Technology as per IS3043-

1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia of

50mm having 80-200 Micron galvanising, Inner pipe dia of 25mm having

200-250 Micron galvanising, connection terminal dia of 12mm with constant

ohmic values urrounded by highly conductive compound with high charge

dissipation suitable for following type of application swith chamber and

heavy duty cover. (A) (approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped and signed

by agency and officer In charge has to ensure the value of earthing

resistane mentioned intest Certificate) & having back filling compound of (B)

Inner chemical (CCM Compound) -Resistivity: -0.2 ohm/ meter testing as

per IEC 62561-2017, Voltage drop :-<1 volt at no load & dry form, Sulphar

content :-<2% (C) Back fill Compound :-Earthing compound should be

capable to retain moisture for long time Necessary test report must be

submitted by Agency.

(a) For Electrical Installation up to 440V in normal soil, Length of pipe -

1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Ea.

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms. buried

in specially prepared 2.5 Mtr. deep earth pit complete with necessary G.I.

strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch

gear, conduit run or power plug etc. 1.00 685.79 Ea.

For using salt and charcoal/ coke as required for pipe type earthing. 1.00 171.70 Ea.

Supplying & erecting D.C.P. type fire extinguisher for following capacity

cartridge type with gun metal cap 150 gram CO2 gas cartridge, powder and

brackets confirming to IS 2171 1985 and complete erected with necessary

clamps made from 50 x 6 mm M S Flat with nuts and bolts grouted in wall

complete. [B] For 10 KG Capacity 1.00 2226.04 Ea.

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S. Flat

with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as

per IS 13849 or 1 Kg capacity with necessary clamp for erection on wall

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe and

accessories (a) 2 wire 1.5 sq. mm 50.00 62.62 Mtr

(b) 2 wire 2.5 sq. mm 20.40 82.82 Mtr

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- PROVIDING & ERECTING 4.00MT HT DECORATIVE LED STREET LIGHTING

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-9"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying & erecting in earthpit of minimum bore dia. 225mm size

approved make Safe Earthing Electrode consisting Pipe-in-Pipe

Technology asper IS 3043-1987 made of corrosion free hot dipped

G.I.Pipes having Outer pipe dia of 80mm having 80-200 Micron

galvanising, Inner pipe dia of 40mm having 200-250 Micron galvanising,

connection terminal dia of 14mm with constant ohmic value surrounded

by highly conductive compound with high charge dissipation suitable for

following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of

earth resistance of installation duly stamped and signed by agency and

officer Incharge has to ensure the value of earthing resistane mentioned

in test Certificate)& having back filling compound of (B) Inner chemical

(CCM Compound) -Resistivity:- 0.2 ohm/ meter testing asper IEC 62561-

2017, Voltage drop:-< 1 volt at no load & dry form, Sulphar content:-

<2%(C) Back fill Compound:- Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

[A] For electrical installation up to 440 V Length of Pipe - 1 Mtr Back

filling compound - 1 Nos. of Bag of 15 Kgs. 1.00 5842.85 Ea.

Cast iron earth plate size 30 X 30 X 0.35 cms. buried in specially

prepared 2.5 Mtr. deep earth pit complete with necessary G.I. strip in G.I.

pipe 2 Mtr. long with coupling and G.I. plug for earthing of switch gear,

conduit run or power plug etc. 1.00 685.79 Ea.

Supplying and erecting approved make Conical Pole (Medium Duty)

made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759, with

required base plate and integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with necessary

GI nut-bolts/ J-Bolts. asper details given by manufacturer considering

site requirement. The length of poles are as below. (D) 6 Mtr. Long

mm Top X 160 mm bottom dia, 3 mm thickness 10.00 10169.69 Ea.

(B) 4 Mtr. Long 70 mm Top X 130 mm bottom dia, 3 mm thickness 31.00 6498.34 Ea.

Supplying and erecting Street light pole bracket comprising main B Class

GI pipe of 4.2 cm/ require outside dia. complete with suitable B Class

G.I. sleeve tubing of approx. 45cms. length and suitable for 76.5mm/

80mm/ require size of pole top having nuts and bolts for fixing the

brackets and having spread of 0.5 mtr. Length with 110 deg.with vertical

plane and suitable welded stiffener reducer and nipple with check nut

complete painted with one coat of Red oxide/ PU base primer and two

coats of Aluminium/ PU paint. paint with following nos of arms. [A]

Single Arm bracket 0.5 Mtr 31.00 491.87 Ea.

[B] Double Arm bracket 1.0 Mtr 10.00 829.21 Ea.

Supplying and erecting LED street light/ Flood light fittings with High

power White LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High pressure

die cast aluminum housing with smooth finish powder coated and heat

sink extruded aluminium with diffuser and polycarbonate optics/ lenses,

with toughened glass with company mark/ name engraved or embossed

160 to 270 V, Power Factor more than 0.95, THD<10 %, CCT 3000K to

5700K, Uniformity ratio >0.45, Luminaire efficacy > 100 lumens/ watt.

LED driver efficiency > 85% as per approved vender list make (fittings

required LM-79 & LM-80 certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer incharge

may select any wattage capacity between the ranges shown.) (A) Street

Light (IP-65), Surge protection -4KV integral and, Light must have

440VAC line supply with over-voltage protection. (i) above 36 to

Watts, Cat-lll 41.00 3345.12 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark, Cat.-III 41.00 112.11 Ea.

Supplying & erecting XLPE (IS:7098)(i)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size (E) 3 core

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables

(a) 4 core 4 Sq.mm 615.00 117.16 Mt

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground/ road surface for enclosing

cable (A) 50 mm dia 594.50 62.62 Mt

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and

making the surface as normal ground. 582.20 55.55 Mt

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and out side looking

arrangement with look and keys in duplicate 35 x 35 x 5mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested asper IP 55 test & followed by IS 2147 of

1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 1884.66 Ea.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fireproof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as directed.

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A

to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections & complete erected in existing

16 G.M.S. housing. ICS=100% of ICU only - Cat III 1.00 6173.12 Ea.

Supplying and erecting approved make set of indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with necessary

connections. 1.00 43.43 Ea.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T, BCH,T.C., Siemens, C&S make). (a) for 25/ 32 A rating 1.00 3253.21 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF WATER ROOM

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-10"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for Foundation upto 1.50Mt. Depth including sorting out and

stacking of useful materials and disposting off the excavated stuff upto

all lead and sretta 12.30 157.15 Cumt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 4.20 3345.58 Cumt

Provinding and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

Columns and Mass concrete. 2.30 4223.87 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (B) COLUMNS: (i) Having

cross-sectional area 0.05 to 0.08 Sq.M (B) Column 0.70 14145.47 Cumt

Providing and laying controlled cement concrete M.200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in (A) BEAMS :(i) Having

cross-sectional area 0.05 to 0.08 Sq.M 3.30 10514.06 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing TMT Bar FE 500D Reinforcement for RCC work including

bending, binding and placing in position complete up to floor two level. 923.80 77.28 Kg

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 2.80 301.77 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sqcm. in superstructure above plinth level

upto floor two level in cement mortar 1:5 (1-cemet : 5 -fine sand). (B)

Conventional 6.50 4526.81 Cumt

Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half brick walls for interior plastering upto floor two level

and finished even and smooth in finishing with a floating coat of neat

cement slurry. (i) cement Mortar 1:3 (1 cement : 3 Sand) 33.00 246.04 Sqmt

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1

cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1 cement :

sand) etc. Complete 57.20 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja. 92.30 43.04 Sqmt

Providing and laying Marble stone slab flooring over 20mm (average)

base of cement mortar 1:6 (1-cement : 6-coarse sand) and jointed with

grey cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick 22.50 2231.50 Sqmt

Providing and Laying 24" x 24" Vitrified 8mm thick tile flooring over

20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse

Sand) on new surface or fixing on exiting flooring by adhesive materials

including dismentalling of existing flooring and jointed with colour

cement slurry including finished with flush pointing & cleaning the

surface etc. complete for Light Shade 13.90 1264.40 Sqmt

Providing and laying Coloured glazed tiles of he size 300mm x 200mm x

8mm/ 300mm x 450mm x 8mm in skirting, risers of steps and dedo on

10mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry. 33.50 1488.23 Sqmt

Providing and fixing flush door shutters, solid core construction with

frame of first class hard-wood with cross band and face veneer or

plywood face panels, including anodized aluminium butt hinges with

necessary screws. (B) Non-decorative type and black board core

anodized aluminium butt hinges in flush door shutters. (2) 35 mm. Thick

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 33.00 82.85 Sqmt

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall

Surface (Two Coats) to give an required shape even shade after

throughly brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete. 57.20 120.26 Sqmt

Plumbing & Sanitary Fittings :

Providing, laying and jointing in true line and level 25mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings as approved by Engineer-

in-charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 100.00 91.84 Rmt

Providing, laying and jointing in true line and level 32mm dia. U.P.V.C.

pipe (SCH-40) for cold water including fittings as approved by Engineer-

in-charge. Pipe shall be fixed on the wall with the help of clamp at every

two meter c/c or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 50.00 119.15 Rmt

Providing and fixing screw down bib taps of following size. (B) Brass

chromium plated screw down Bib Tap. (i) 15mm dia. 6.00 186.83 No

Providing and fixing Gun metal check or non-return fullway wheel valve.

(C) 25mm dia. 2.00 420.63 Each

Providing and fixing PVC SWR Nahni Trap IS 14735 for drain - 100 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I. Scrwed down or hinged grating inlcuding the cost of

cutting and making good the walls. 5.00 586.27 Each

Providing & erecting water cooler having storage capacity 150 Ltr. &

cooling capacity 150 Ltr.per hour @ an ambient temp of 45˚ C. The

outlet temp. of the water should drop by 15˚C within a hour, The water

cooler should be comprising of hermetically sealed compressor, fan

motor, condensing unit, water tank surrounded by evaporating, coil,

thermostats, relay etc.complete with necessary inlet & outlet connection.

The body of water cooler will be made from stainless steel. 1.00 55893.40 Ea.

Supplying & erecting 5 stage single reverse osmosis water purification

system with M.S. powder coated frame, prefilter housing with 'O' ring

presediment filter GAC filter, carbon filter suitable buster DC pump

capacity 80 psi, mention with 40 psi inline type post carbon filter auto low

& high pressure switches with following size of storage tank & LPH

capacity & erected as directed. [B] 25 Ltr/ Hr with 30 Ltr. Storage Tank

Electrical Fittings :

Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10mtr length, in below type of pipe erected

with 6A Modular type switch/ bell push & accessories and earth

continuity of following type, erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with textured/ metallic/ white front

plate modules erected on/ in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/ H.D. Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ ceiling complete. Cat. III 9.00 449.45 Pt

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC/ Metallic/ Wooden

box covered with appropriate front plate modules erected on/ in wall/

ceiling as per pipe erected with following type of accessories. [II] For

16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ ceiling complete. Cat-III 2.00 711.04 Pt

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC/ Metallic/ Wooden box, single mounting base

frame covered with textured/ metallic /white front plate modules erected

on/ in wall/ ceiling with following type accessories. Cat-III 1.00 257.55 Pt.

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (iv) 16 to 20 watts, Cat. III 9.00 258.56 Ea

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. Cat-III 1.00 112.11 Ea

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.,

Cat. III 1.00 299.97 Ea

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge

has to ensure the value of earthing resistane mentioned intest

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound) -Resistivity: -0.2 ohm/ meter testing as per IEC 62561-

2017, Voltage drop :-<1 volt at no load & dry form, Sulphar content :-

<2% (C) Back fill Compound :-Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

(a) For Electrical Installation up to 440V in normal soil, Length of

pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Ea

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug

for earthing of switch gear, conduit run or power plug etc. 1.00 685.79 Ea

For using salt and charcoal/ coke as required for pipe type earthing. 1.00 171.70 Ea

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of

following capacity with necessary clamps made from 50 x 6 mm M.S.

Flat with nut & bolts grouted in wall complete. [A] For 4.5 Kg Capacity 1.00 6591.26 Ea

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher

as per IS 13849 or 1 Kg capacity with necessary clamp for erection on

wall 1.00 848.40 Ea

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe

and accessories (a) 2 wire 1.5 sq. mm 6.17 62.62 Mtr

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF SECURITY ROOM

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-11"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to

all lead. (B) Dence or Hard Soil 13.70 157.15 Cumt

Excavation for foundation for upto 1.5m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

all lead. (C) Hard Murrum 6.80 268.92 Cumt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 2.80 3345.58 Cumt

Provinding and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

Columns and Mass concrete. 4.30 4319.14 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in: (A) BEAM (i) Having

cross sectional area 0.05 to 0.08 Sqm. 0.80 10514.06 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in : (A) BEAM (ii) Having

cross sectional area more than 0.08 Sq.mt.and up to 0.12Sqm. 1.10 9237.35 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for R.C.C. work in: (B) COLUMN (ii) Having

cross sectional area more than 0.08 Sq.mt.and upto 0.12 Sqm. 1.60 12328.73 Cumt

Providing laying controlled cement concrete M-200 and curing complete

including the cost of form work but excluding reinforcement for

reinforced concrete work in : (C) Slab, landing, shelves, balconies,

Lintesl, Beams, Girders and cantilever upto floor two level.

Providing TMT Bar FE 500D Reinforcement for RCC work and bending,

binding & placing in position complete up to floor two level. 1067.50 77.28 Kg

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 15.80 301.77 Cumt

Brick work using common burnt clay building brick having crushing

strength not less than 35 Kg/Sqcm. in cement mortar 1:5 (1 cement :

fine sand) for brick work in super structure above plinth level upto floor

two level (B) Conventional 4.30 4526.81 Cumt

Providing and fixing flush door shutters, solid core construction with

frame of first class hard-wood with cross band and face veneer or

plywood face panels, including anodized aluminium butt hinges with

necessary screws. (B) Non-decorative type and black board core

anodized aluminium butt hinges in flush door shutters. (2) 35 mm. Thick

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill. 93.60 106.23 Kg

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

dirt and other foreign mater and scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 4.70 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 4.70 92.20 Sqmt

Providing 15mm thick cement plaster in single coat on rough (Similar)

side of single or half brick walls for interior plastering upto floor two level

and finished even and smooth in finishing with a floating coat of neat

cement slurry. (i) cement Mortar 1:3 (1 cement : 3 Sand) 40.00 246.04 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 40.00 82.85 Sqmt

20mm thick sand faced cement plaster on walls upto height 10metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete. 49.60 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja. 34.20 43.04 Rmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after throughly

brushing the surface to remove all dirt, and remains of loose powdered

materials etc. complete. 49.60 120.26 Sqmt

Providing and Laying 24" x 24" Vitrified 8mm thick tile flooring over

20mm (Average) base of cement mortar 1:6 (1-cement : 6 coarse sand)

on new surface or fixing on exiting flooring by adhesive materials

including dismentalling of existing flooring and jointed with colour

cement slurry including finished with flush pointing & cleaning the

surface etc. complete for Light Shade. 11.20 1264.40 Sqmt

Providing and laying Marble stone slab flooring over 20mm (average)

base of cement mortar 1:6 (1-cement : 6-coarse sand) and jointed with

grey cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick 7.40 2231.50 Sqmt

Providing and laying broken China Mosaic Flooring for Terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and tobe tempered to bring mortar crème

out upto surface using white cement including rounding off juctions and

extending them up to 15cm. along the wall, clearing with water and

oxalic acid etc. as directed. 7.00 779.70 Sqmt

Providing & Fixing window having extruded alluminium colour Powder

Coated Section frame main outer size 63.50mm x 38.10mm x 1.95mm

(of Jindal Section No. 4605, @ Wt. of 1.094 kg/mt), horizontal Two

Track member size 61.85mm x 31.75mm x 1.20mm (of Jindal Section

No. 8687 @ Wt. of 0.695Kg./mt.), Vertical member of size 61.85mm x

31.75mm x 1.30mm (of Jindal Section No. 8758 @ Wt. 0.659 Kg./mt)

with Sliding shutters of Horizontal member size 40mm x 18mm x

1.29mm (of Jindal Section No. 8949 @ Wt. of 0.456 kg./mt.), Vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section No.

@ Wt. of 0.456 kg./mt. with 5mm thick transparent bronze colour tinted

float glass with powder coated alluminium fitting and fixtures and

transparent silicon sealant glass fixing to frame as per details etc. 4.70 1705.66 Sqmt

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor. (F) 75mm 2.00 280.23 Rmt

Electrical Fittings :

Point wiring for Light/ Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10mtr length, in below type of pipe erected

with 6A Modular type switch/ bell push & accessories and earth

continuity of following type, erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with textured/ metallic/ white front

plate modules erected on/ in wall/ ceiling as per pipe erected, with

necessary Lamp holder/ ceiling rose/ H.D. Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ ceiling complete. Cat. III 6.00 449.45 Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10mtr length, in below type of pipe erected complete

with Modular type switch & 5 pin Plug erected on PVC/ Metallic/ Wooden

box covered with appropriate front plate modules erected on/ in wall/

ceiling as per pipe erected with following type of accessories. [II] For

16A Plug and 16 amp switch with 2-2.5 sq.mm Cu. Wire from mcb

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ ceiling complete. Cat-III 1.00 711.04 Pt.

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC/ Metallic/ Wooden box, single mounting base

frame covered with textured/ metallic /white front plate modules erected

on/ in wall/ ceiling with following type accessories. Cat-III 1.00 257.55 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multi

strand copper wires upto 10 mtr length, in below type of pipe erected

with 6A Modular type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of following

type erected on PVC/ Metallic/ Wooden box, single mounting base

frame covered with textured/ metallic/ white front plate modules erected

on/ in wall/ ceiling as per pipe erected. with necessary ceiling rose/

H.D.Connector as directed. (a) with medium class Rigid PVC pipe

and accessories erected flushed on wall/ ceiling complete (Cat. III)

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200mm sweep

complete having 3 blades aluminium body and blade sets having

ornamental design shanks, canopy erected with earthing. [Make shall be

approved by Engineer in Charge]

Supplying and erecting led lamps with following wattage capacity of

to 240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22

lamp holders, pf >= 0.5 (A) LED Lamps integral type, with PC

diffuser suitable LAMP holder (iv) 16 to 20 watts, Cat. III 6.00 258.56 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark. Cat-III 1.00 112.11 Ea.

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge

has to ensure the value of earthing resistane mentioned intest

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound) -Resistivity: -0.2 ohm/ meter testing as per IEC 62561-

2017, Voltage drop :-<1 volt at no load & dry form, Sulphar content :-

<2% (C) Back fill Compound :-Earthing compound should be capable to

retain moisture for long time Necessary test report must be submitted by

(a) For Electrical Installation up to 440V in normal soil, Length of

pipe - 1 Mtr, Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Ea.

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug

for earthing of switch gear, conduit run or power plug etc. 1.00 685.79 Ea.

For using salt and charcoal/ coke as required for pipe type earthing. 1.00 171.70 Ea.

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe

and accessories (a) 2 wire 1.5 sq. mm

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- OPERATION AND MAINTENANCE OF GARDEN

LOCATION : BHID BHANJAN MAHADEV TEMPLE, LATHI - AMRELI HIGHWAY ROAD, AT LATHI.

SCHEDULE - "B-12"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Operation and maintenance of the Bhidbhanjan Mahadev Garden

(Left Side) for 5 years, with all material and labor work as per the

rules of Lathi Municipality. Cleaning of all the property of the garden

shall be done with the responsibility of appointing a watchman to

supervise and all the work as per the instructions of the supervisor.

Insurance of the entire property and staff (cleaning staff, watchman,

supervisor) including all taxes for the next 5 years shall be borne by

the contractor. The work shall be carried out as per the terms of the

contract and as directed by the Engineer-in-Charge of Lathi

Municipality. Garden Plot Area: 5408.00 Sqmt. Measurement :

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF PROTECTION WALL WITH PATHWAY & LED LIGHT

LOCATION : SWAMINARAYAN TEMPLE TO APMC, OPP. AARAM GRUH, AT. LATHI

SCHEDULE - "B-13"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to

all lead. (B) Dense or Hard soil. 365.70 157.15 Cumt

Excavation for foundation upto 1.5m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

all lead. (C) Hard Murrum 365.70 268.92 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 138.20 586.81 Cumt

Supplying of Stone Dust all lead and lift 34.60 288.25 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (i) 40mm size aggregates 138.20 262.23 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (ii) Sand/ Stone dust 34.60 154.84 Cumt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 138.20 3345.58 Cumt

Providing and casting in situ controlled cement concrete M-250 for

RCC Return as per drawings including centering shuttering, scaffolding

where necessary, laying vibrating, curing and finishing complete. (A)

Height from 0.0 to 5.0 M. (1) Piers, (2) Abutment, RCC Return 512.40 5057.07 Cumt

Providing and laying in position FE500D TMT bar reinforcement

including cutting, bending, hooking and tying complete as per detailed

drawings for the following. (A) Piers (B) Abutments (C) R.C.C. Returns

Providing and laying weep hole in abutment and return by using A.C.

pipes of 100mm diameter including laying in proper grade and jointing

the completed asper detailed specification. 325.00 56.12 Each

Steel work including cutting, hoisting, fixing position and applying

priming coat of red lead paint to steel work, welded built-up section. (A)

In beams and joists, channels as main and cross beams with angle

tees, flats, connecting plates or angle cleats. Hip and jack rafters,

purlins are attached to common rafters and the like. with M.S. Providing

necessary pattern railing with M.S 101.06mm (2.5mm) dia main pipe

and 60.3mm (2mm) dia bottom pipe with 5mm MS plate RCC wall top

and fixing in base plate 150mm x 150mm, 12x40 nuts bolts suitable

Fixing welding work in place and completing in required distance.

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 195.00 92.20 Sqmt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 689.10 301.77 Cumt

Providing and fixing pre cast Rubber Dye/ steel Dye inter locking

concrete block 60mm thick with grade of concrete M-300 pnumatic

compressed/ vibrated mechanically and as per approved design

Confirming to IS 15658 : 2006 including 35mm Sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guid lines of IRC : SP 63-2018 etc. Complete. 575.30 706.93 Sqmt

Providing and casting in situ ordinary cement concrete M-200 for Kerbs

/Kerb blocks including formwork, curing and finishing complete. 15.00 4115.75 Cumt

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

complete. 20.60 1109.07 Sqmt

Providing 10mm thick cement plaster in single coat on brick/ concrete

walls for interior plastering upto floor two level and finished even and

smooth in (i) cement mortar 1:3 (1-cement: 3-sand) 45.80 145.65 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete 25.20 120.26 Sqmt

Providing & Erecting LED Street Light

Supplying and erecting approved make Conical Pole (Medium Duty)

made from HR sheet steel. The pole should be made as per IS. and

shall be coated with hot dip galvanizing as per IS 2629/2633/4759, with

required base plate and integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mm x 7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

terminations as erected on suitable foundation (included) with

necessary GI nut-bolts/ J-Bolts. asper details given by manufacturer

considering site requirement. The length of poles are as below. (C)

Mtr. Long 70 mm Top X 145 mm bottom dia, 3 mm thickness. 22.00 8145.65 Ea.

Supplying and erecting Street light pole bracket comprising main B

Class GI pipe of 4.2 cm/ require outside dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm/ require size of pole top having nuts and bolts for fixing

the brackets and having spread of 0.5 mtr. Length with 110 deg.with

vertical plane and suitable welded stiffener reducer and nipple with

check nut complete painted with one coat.of red oxide/ PU base primer

and two coats of aluminium/ PU paint. paint with following nos of arms.

[A] Single Arm bracket 0.5 Mtr 22.00 491.87 Ea.

Supplying and erecting LED street light/ Flood light fittings with High

power White LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and poly carbonate

optics/ lenses, with toughened glass with company mark/ name

engraved or embossed 160 to 270 V, Power Factor more than 0.95,

THD<10%, CCT 3000K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy> 100 lumens/ watt. LED driver efficiency> 85% as per approved

vender list make (fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings.The Engineer incharge may select any wattage capacity between

the ranges shown.) (A) Street Light (IP-65), Surge protection -4KV

integral and, Light must have 440VAC line supply with over-voltage

protection. (ii) above 36 to 48 Watts, Cat-lll 22.00 3345.12 Ea.

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark, Cat.-III 22.00 112.11 Ea.

Supplying & erecting XLPE (IS:7098)(i)-88 ISI unarmoured copper cable

1.1 KV grade to be erected as directed of following size (E) 3 core

Providing and erecting XLPE (IS:7098) (I)-88 ISI armoured cable

multistrand Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench/ pipe of following size of cables

(a) 4 core 4 Sq.mm 330.00 117.16 MT

Providing & laying approved make Double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground/ road surface for enclosing

cable (A) 50 mm dia 319.00 62.62 MT

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and

making the surface as normal ground. 312.40 55.55 MT

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45cm high bricks work finishing with plaster etc. hinged double door

internally supported on both side, with internal and out side looking

arrangement with look and keys in duplicate 35 x 35 x 5mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested asper IP 55 test & followed by IS 2147 of

1962 (C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge

MS Sheet with angle iron legs 45 cm long made from 35 X 35 X

mm thick MS angle. 1.00 1884.66 Ea.

Supplying & erecting approved make Digital time switch having lithium

cell 6 years operative and operate battery backup 1 channel day clock

with 14 memory programme, suitable to operate on 240V + 5%, 16A

with, floating contacts Minimum switching setup time 1 minimum & LCD

display. Also comprised permanent ON/OFF switching. Programming

switches & housed in fire proof thermoplastic enclosure & transparent

cover erected as required with necessary connection erected as

directed. 1.00 3168.37 Ea.

Approved make Four pole moulded case circuit breaker having breaking

capacity ICU of 25 KA. at 415 V,having normal current rating up to 25 A

to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only - Cat III 1.00 6173.12 Ea.

Supplying and erecting approved make set of indicator lamps of LED

type lamp, lens cover, Bakelite holder complete erected with necessary

connections. 1.00 43.43 Ea.

Providing and erecting AC-3 duty 3 pole power contactor with 2 NO &

NC aux contacts complete with 415V/220V operating coil suitable for

(L&T, BCH,T.C., Siemens, C&S make). (a) for 25/ 32 A rating 1.00 3253.21 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF RCC BOX CULVERT (41.14 X 5.00 MT)

LOCATION : APMC ROAD, OPP. AARAM GRUH, AT. LATHI,

SCHEDULE - "B-14"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation in sand, gravel, clay soft soils and murrum

etc. including shoring, strutting dewatering as necessary and disposing

of the excavated stuff as directed. (A) Depth upto 3.0 M. and lead

upto 100m for 10 Cum 262.80 511.11 Cumt

Excavation in large boulders and soft rock by welding including shoring,

strutting and dewatering as necessary and disposing of the excavated

stuff as directed. 175.20 716.55 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 87.60 680.53 Cumt

Supplying of Stone Dust all lead and lift 21.90 366.93 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (i) 40mm size aggregates 87.60 262.23 Cumt

Providing and filling in foundation with ordinary Cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 39.40 3345.58 Cumt

Providing and Casting in situ controlled Cement Concrete M-250 for

RCC Raft and cutt-off walls including necessary shuttering laying,

vibrating, ramming and curing complete. 93.50 4477.33 Cumt

Providing & Laying controlled cement concrete M-250 for RCC Return

as per drawing including necessary shutering laying,vibrating, height

from 0.00 to 5.00 m (a) Pier, (b) Abutment, (C) RCC Return. 62.20 5084.34 Cumt

Providing and laying in position FE 500D TMT bar reinforcement

including cutting, bending, hooking and tying complete as per detailed

for the following. (A) Abutment cap & Dirt wall. (B) Pier Cap. 14.10 73858.69 MT

Providing and casting in situ ordinary cement concrete M250 for RCC

solid slab including centering, scaffolding curing and finishing complete. 85.70 4656.10 Cumt

Providing and casting in-situ controlled cement concrete M-250 for

kerb/kerb blocks including formwork curing and finishing complete 4.40 4725.79 Cumt

Providing and casting in situ ordinary cement concrete M-250 for

average 75mm thick wearing coat laid as directed including tamping,

vibrating, finishing, curing and filling in joints with bitumen complete. 18.70 4221.80 Cumt

Providing and placing in position FE500D TMT bar reinforcement

including cutting, bending, hooking, and tying complete as per detailed

drawing. (A) Solid Slab. 9.80 73243.01 MT

Providing and fixing post and pipe railing as per detailed drawing

including 3 coats of painting to steel works complete. 78.70 1214.22 Rmt

Providing & laying weep hole in Aburtments, and returns by using A.C.

pipe of 100mm including laying in proper grede and jointing the

completed as per detailed specification. 24.00 56.12 Ea.

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. Thickness including watering, ramming and consolidating etc.

complete. 61.50 301.77 Cumt

Providing and laying - Fitter Media 600mm thick directed at the back of

abutments, returns and wing walls as per detailed specifications. 32.50 1239.35 Sqmt

Providing & Erecting LED Street Light

Supplying and erecting approved make Octagonal pole made from HR

sheet steel. The pole should be made as per IS. and shall be coated

with hot dip galvanizing as per IS 2629/ 2633/ 4759, suitable suspend

local wind speed with integral Junction box consist of terminal plate of

min 6mm Hylam sheet, standard profile 35mm X 7.5mm Din-Rail for

MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement.

(C) 5Mtr. Long 70mm Top X 130mm bottom dia, 3mm thickness

with 200mm X 200mm X 12mm base plate, 4-M16 Bolts and 600mm

long with necessary G.I. J Bolts . Approx Pole weight 46 kg 10.00 5556.01 Ea.

Providing and erecting Street Light pole bracket comprising main B

Class GI pipe of 4.2cm/ require out side dia. complete with suitable B

Class G.I. sleeve tubing of approx. 45cms. length and suitable for

76.5mm/ 80mm/ required size of pole top having sufficient fasteners for

fixing the brackets and having spread of 1.5.mtr. length with 110deg.

with vertical plane & suitable welded stays, reducer and with check nuts

complete painted with one coat of Red oxide/ PU base primer and two

coats of Aluminium/ PU paint. paint with following nos of arms. [A]

Single Arm Bracket 1.5 Mtr 10.00 683.77 Ea.

Supplying and erecting LED street light/ Flood light fittings with high

power white LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD<10 %, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy>100 lumens/watt. LED driver efficiency> 85% as per approved

vender list make.(fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts, Cat-III 10.00 4997.48 Ea.

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35 x 35 x 5 mm M.S. Angle

of Two Nos. one is welded and other with nut and bolt for erecting

Bakelite sheet. Painting the Section Pillar inside and out side with three

tank powder coated paint. section pillar roof should be without joint with

water leakage proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 1884.66 Ea.

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’&’OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed. 1.00 2354.31 No

Supplying & erecting power contactor, AC 3 duty for time switch

complete erected as per direction Cat III (C) 4 pole 440V 16 Amp. 1.00 857.49 Ea.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire. 10.00 368.65 Ea.

For using salt and charcoal / coke as required for pipe type earthing. 10.00 171.70 Ea.

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe

dia of 25mm having 200-250 Micron galvanising, connection terminal dia

of 12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge

has to ensure the value of earthing resistane mentioned intest

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound) -Resistivity: -0.2 ohm/ meter testing as per IEC 62561-

2017, Voltage drop :-<1 volt at no load & dry form, Sulphar content :-<2%

(B) Inner chemical (CCM Compound) -Resistivity: -0.2 ohm/ meter

testing as per IEC 62561-2017, Voltage drop :-<1 volt at no load & dry

form, Sulphar content :-<2% (C) Back fill Compound :-Earthing

compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (a) For Electrical Installation

up to 440V in normal soil Length of pipe - 1 Mtr Back filling

compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Ea.

Supplying and erecting Flexible PVC insulated multi strand multi core

1.1 kv grade ISI marked copper wires of following size to be erected as

directed. (e) 1.50 Sq.mm 3 core round PVC sheathed 50.00 46.46 Mtr

providing and erecting Miniature circuit breaker single pole 0.5A to 2A

system and having breaking capacity 10 KA to be erected in existing

box. confirming to IS 8828/1996 with ISI Mark. Cat-III 10.00 270.68 Ea.

Providing & erecting 415 V MCB Four Pole Switch for Lighting Load

(Bcurve) having 10 KA breaking capacity & confirms to IS : 8828 in

existing box having following capacity (b) 40 Amp., Cat III 1.00 638.32 Ea.

Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable

multistrand/ Solid Aluminium conductor for 1.1 KV. to be laid on wall with

necessary clamps or in existing trench / pipe of following size of cables

(A) 4 core 4 Sq. mm 170.00 169.68 Mtr

Providing & laying approved make double walled corrugated pipes

(DWC) of polyethylene (conforming to IS 14930 II) with necessary

connecting accessories of same material at required depth in existing

trench for laying of cable. below ground/ road surface for enclosing

cable (A) 50mm dia. 160.00 62.62 Rmt

Making trench in soft soil of suitable width of 90 cm deep for laying cable

or locating the fault all over the run and back filling the same and

making the surface as normal ground. 150.00 55.55 Mtr

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF COMMUNITY HALL

LOCATION : KALAPI PARK, KAPIL HANUMANJI MANDIR, COMMON PLOT NO. 66, AT LATHI.

SCHEDULE - "B-15"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for Foundation upto 1.50Mt. Depth including sorting out and

stacking of useful materials and disposting off the excavated stuff upto

all lead. (B) Dense or Hard soil 37.50 157.15 Cumt

Excavation for Foundation upto 1.50Mt. Depth including sorting out and

stacking of useful materials and disposting off the excavated stuff upto

all lead. (C) Hard Murrum 17.70 268.92 Cumt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 17.80 3345.58 Cumt

Provinding and laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

Columns and Mass concrete. 11.60 4624.89 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc, complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in: (A) Beam (ii) Having cross

sectional area more than 0.08 Sq.mt.and up to 0.12 Sqm. 6.10 9237.35 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc, complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in: (A) Beam (iii) Having cross

sectional area more than 0.12 Sq.mt.and up to 0.18 Sqm. 11.90 7741.49 Cumt

Providing and laying controlled cement concrete M-200 exposed work

with curing etc. complete including the cost of formwork but excluding

the cost of reinforcement for RCC work in: (B) Column (iii) Having

cross sectional area more than 0.12 Sq.mt.and upto 0.18 Sqm. 8.40 9955.10 Cumt

Providing and laying controlled cement concrete M.200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (C) Slabs, landing, shelves, Balconies

Lintels, Beams, Girders and Cantilever upto floor two level.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level 6700.00 77.28 Kg

Brick work using common burnt clay building bricks having crushing

strength not less than 35 Kg/Sqcm. in superstructure above plinth level

upto floor two level in cement mortar 1:5 (1-cement : 5 -fine sand). (B)

Conventional 27.40 4526.81 Cumt

Filling available excavated earth (excluding rock) in trenches, plinth,

sides of foundation etc. in layers not exceeding 20cm. In depth

consolidating each disposited layer by ramming and watering. 37.20 136.91 Cumt

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc

completed. 52.20 301.77 Cumt

Providing 15mm thick cement plaster in single coat on Rough (Similar)

side of single or half brick walls for interior plastering up to floor two level

finished even and smooth in finishing with a floating coat of neat cement

slurry. (i) cement Mortar 1:3 (1 cement : 3 Sand). 302.00 246.04 Sqmt

20mm thick sand faced cement plaster on walls upto height 10 metres

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete. 258.40 342.41 Sqmt

Providing throating or plaster drip and moulding to R.C.C. Chhaja. 74.10 43.04 Rmt

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

complete. 18.40 1109.07 Sqmt

Providing and Laying 24" x 24" Vitrified 8mm thick tile flooring over

20mm (Average) base of Cement Mortar 1:6 (1-Cement : 6 Coarse

Sand) on new surface or fixing on exiting flooring by adhesive materials

including dismentalling of existing flooring and jointed with colour

cement slurry including finished with flush pointing & cleaning the

surface etc. complete for Light Shade. 106.40 1264.40 Sqmt

Providing and laying coloured glazed tiles of the size 300 mm x 200 mm

x 8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo

on 10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry. 92.80 1488.23 Sqmt

Providing and laying broken China Mosaic Flooring for Terrace using

12mm to 20mm broken pieces of glazed tiles to be laid over cement

mortar 1:3 to plain or slope and tobe tempered to bring mortar crème

out upto surface using white cement including rounding off juctions and

extending them up to 15cm. along the wall, clearing with water and

oxalic acid etc. as directed. 112.90 779.70 Sqmt

Providing and fixing flush door shutters, solid core construction with

frame of first class hard-wood with cross band and face veneer or

plywood face panels, including anodized aluminium butt hinges with

necessary screws. (B) Non-decorative type and black board core

anodized aluminium butt hinges in flush door shutters. (2) 35 mm. Thick

Providing and fixing window having extruded aluminum Colour Powder

Coated section frame main outer size 95mmx24mmx1.17mm (of Jindal

Section no:2459 @ wt.of 0.738 Kg/mt), horizontal Three track member

size 92mmx31.75mmx1.30mm (of Jindal Section no:8688,@

Wt.1.07Kg/mt), vertical member of size 92 mm x 31.75 mm x1.50mm

(of Jindal Section no:8933,@ Wt. 1.06 Kg/mt) with sliding shutters of

horizontal member size 40 mm x 18 mm x 1.29mm (of Jindal Section

no:8947@ wt.of 0.456 Kg/mt), vertical member of size

40mmx18mmx1.29 mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt/

with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc 5.60 1591.87 Sqmt

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Plain grill 390.00 106.23 Kg

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

dirt and other foreign mater and scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 19.49 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 19.49 92.20 Sqmt

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on wall surfaces to give an even shade including

throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth. 302.00 82.85 Sqmt

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall

Surface (Two Coats) to give an required shape even shade after

throughly brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete. 258.40 120.26 Sqmt

Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall clipsetc.

including making good the wall ceiling and floor.(F) 75mm 3.00 280.23 Rmt

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10mtr length, in below type of pipe erected

with 6A Modular type switch/ bell push & accessories and earth

continuity of following type, erected on PVC/ Metallic/ Wooden box,

single mounting base frame covered with textured/ metallic/ white front

plate modules erected on/ in wall/ ceiling asper pipe erected, with

necessary Lamp holder/ ceiling rose/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 44.00 449.45 Pt.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm

(Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated

multi strand copper wires upto 10mtr length, in below type of pipe

erected with 6A Modular type switch and hum free EME step type

electronic fan regulator mounted and accessories with earth continuity of

following type erected on PVC/ Metallic/ Wooden box, single mounting

base frame covered with textured/ metallic/ white front plate modules

erected on/ in wall/ ceiling as per pipe erected. with necessary ceiling

rose/ H.D.Connector as directed.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 12.00 638.32 Pt.

Providing & erecting Approved make Ceiling Fan with double ball

bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep

complete having 3 blades aluminium body and blade sets having

ornamental design shanks , canopy erected with earthing. [ Make shall

be approved by Engineer in Charge] 12.00 2311.89 Pt.

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length, in below type of pipe erected

complete with Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate modules

erected on / in wall / ceiling as per pipe erected with following type of

accessories. [II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(a) with medium class Rigid PVC pipe and accessories erected

flushed on wall/ceiling complete 16.00 711.04 Pt.

Point wiring for on board Looped Plug with 6A Modular type switch &

pin socket erected on PVC / Metallic/Wooden box, single mounting base

frame covered with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories 8.00 257.55 Pt.

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of co-extruded polycarbonate channel with

diffuser part in needed opal finish with company mark/name 160V to

270V, Power Factor more than 0.9, THD < 15%, CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED driver efficiency > 85% as per

approved vender list make (fitting required LM-79 & LM-80 Certificates)

(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity

between the ranges shown.) (iii) 18-20 Watts, Surge - 2KV,IP-20,

conventional 4 feet Cat. III 12.00 295.93 Ea

Supplying and erecting LED indoor fittings with LEDs of wattage

Watt to 0.5 Watt assembled on single MCPCB, with housing used as a

heat sink shall be made of thick sheet Steel conforming to IS:

513/CRCA /aluminium pressure die cast powder coated and high U.V.

& corrosion resistance with diffuser housed in aluminium casted body

with company mark/name 160V to 270V, Power Factor more than 0.9,

THD < 15 %,CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % ( fitting required LM-79 & LM-

80 Certificates) (NOTE: Below description have shown ranges of

Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(B) LED Panel Light with provision for Plane front frame with

translucent cover fixed to housing complete.IP20 (iii) 12-15 watts,

6" x 6", Surge-2 KV, Cat. III 20.00 466.62 Ea

Providing & erecting 240 V MCB double pole switch for motor &

inductive load (C Curve) having 10 KA breaking capacity & confirms to

IS : 8828 in existing box having following capacity (A) 6 to 32 Amp.,

Cat. III 2.00 299.97 Ea

providing and erecting Miniature circuit breaker single pole 6A to 25A

suitable to operate on 240 V A.C. system and having breaking capacity

10 KA to be erected in existing box. confirming to IS 8828/1996 with ISI

Mark, Cat. III 4.00 112.11 Ea

Supplying & erecting earth pit of minimum bore dia.150mm size

approved make Earthing Electrode consisting Pipe-in-Pipe Technology

as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner

pipe dia of 25 mm having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value surrounded by highly

conductive compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.(approved

make OEM has to submit test certificate) & having back filling

compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at no load

& dry form, Sulphar content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for long time

Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal soil Length of

pipe - 1 Mtr Back filling compound - 1 Nos Bag of 15 Kg. 1.00 4591.46 Ea

providing and erecting Cast iron earth plate size 30 X 30 X 0.35 cms.

buried in specially prepared 2.5 Mtr. deep earth pit complete with

necessary G.I. strip in G.I. pipe 2 Mtr. long with coupling and G.I. plug

for earthing of switch gear, conduit run or power plug etc. 1.00 685.79 Ea

For using salt and charcoal / coke as required for pipe type earthing. 1.00 171.70 Ea

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following type of pipe to be

erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper

conductor FRLS PVC insulated stranded wire of green colour for earth

continuity of following size (A) With medium class Rigid PVC pipe

and accessories (a) 2 wire 1.5 sq. mm 26.71 62.62 Mtr

(b) 2 wire 2.5 sq. mm 10.00 82.82 Mtr

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF STATUE WITH ROAD CIRCLE

LOCATION : APMC ROAD, OPP. AARAM GRUH, AT. LATHI

SCHEDULE - "B-16"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for Foundation upto 1.50Mt. Depth including sorting out

and stacking of useful materials and disposting off the excavated

stuff upto all lead and sretta 5.10 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-

100 mix and providing necessary vertical pin headers including

formwork, vibrating, ramming and curing complete. 1.40 3345.58 Cumt

(ii) Uncoursed Rubble Masonary with hard stone of approved quality

in foundation and plinth in cement mortar 1:5 (1 cement : 5 coarse

sand including leveling upto etc. complete. 4.50 2628.90 Cumt

Providing and laying cement concrete M-200 and curing complete

including cost of formwork in (A) Wall Caps/ Copping. 0.70 4892.74 Cumt

Providing and laying controlled cement concrete M-250 and curing

complete including the cost of formwork but excluding reinforcement

for reinforced concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and Cantilever upto floor

two level. 2.40 7266.95 Cumt

Providing and laying controlled cement concrete M-250 exposed

work with curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C. work in : (A) BEAM

(ii) Having cross sectional area more than 0.08 Sq.mt.and up to

Providing TMT Bar FE 500D reinforcement for R.C.C. work

including bending, binding and placing in position complete upto

floor two level. 700.00 77.28 Kg

Filling in foundation and plinth with murrum or selected soil in layers

of 20cm. thickness including watering, ramming and consolidating

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand)

Providing and laying Marble stone slab flooring over 20mm

(average) base of cement mortar 1:6 (1-cement : 6-coarse sand) or

L.M. 1:1.5 (1-lime putty : 1.5-coarse sand) laid and jointed with grey

cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick

Providing, Supplying and Fixing of Statue. Make by Fiber Glass G.P.

with Golden Colour with fixing as per directed by Engineer-in-

charges. Included Installation, Material, Transportation Charges &

also including all types taxes & Government charges 1.00 128775.00 Each

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- WORK OF BEAUTIFICATION

(Green Plantation with Kerb Kyara Wall, Kotah stone floor, Filling, comound grill with gate, Extend Wall with Wire Fencing,

all component colour work, Seating Benches & Water Supply)

LOCATION : MOX DHAM, LATHI-LILIYA HIGHWAY ROAD, SMASHAN, AT. LATHI

SCHEDULE - "B-17"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

BEAUTIFICATION WITH GREEN LAWN & PLANTATION

Excavation for foundation upto 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 14.90 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 14.10 3345.58 Cumt

Brick work using common burnt clay building bricks having crushing

strength not less than 35kg. /Sq.cm. in foundation and plinth in cement

mortar 1:5 (1-cement: 5-fine sand) (B) Conventional 35.90 4245.09 Cumt

Providing 15mm thick cement plasterin single coat on Rough (Similar)

side of single or half brick walls for interior plastering up to floor two level

and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-

sand) 354.50 195.42 Sqmt

Finishing wall with weather proof exterior emulsion paint on wall surface

(twocoats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials. etc complete. 1867.70 120.26 Sqmt

Providing and laying cement concrete M-200 and curing complete

including cost of formwork in (A) Wall Caps/ Copping. 4.30 4762.65 Cumt

Providing TMT Bar FE 500D Reinforcement for RCC work including

bending, binding and placing in position complete up to floor two level. 344.00 77.28 Kg

Providing and laying Kota stone slab 25mm. Thick in risers of steps,

dedo and pillars laid on 10mm thick cement mortar 1:3 (1 cement :

coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc. complete. 72.90 1109.07 Sqmt

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand)

and jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc. complete. (A) 25mm

thick 807.80 1019.39 Sqmt

Providing and fixing pre-cast concrete kerb stone of gray cement based

concrete block 30cm length, 30cm height and 15cm thick of M250 grade

concret as per approved design and including excavation for fixing in

proper line and level, filling the joint with C:M 1:3 (1cement : 3 fine sand)

etc complete. 311.00 374.92 Rmt

Supplying of crushed stone aggregates, chippings etc. of machine cut

stone of following nominal size free of disintegrated pieces deletarious

and oraganic mater (for Bitumen surface dressing etc.) and grading as

per I.R.C. Code.(vi) 10mm all lead and lilft 36.40 589.37 Cumt

Spreading the stone aggregate for rolling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

Blindage) (iv) Chipping varying from 6mm to 25mm size. 36.40 262.23 Cumt

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like 2.25 9108.48 Qtl

Providing and fixing Barbed wire for fencing of galvanized steel wire

weighting 9.38 Kg. per 100 Metre of with M.S. Angle posts 40mm x

40mm x 6mm and oil painting 3 coats fixed on wall top etc complete. 185.00 174.73 Rmt

Supplying and stacking of good earth at site including royalty and

carriage upto 5 km lead complete (earth measured in stacks will be

reduced by 20% for payment) 154.90 520.75 Cumt

Mixing earth and sludge or manure in the required proportion specified

or directed by the Officer-in-charge. 154.90 36.91 Cumt

Supplying and stacking of well decayed cattle manure at site including

royalty and carriage upto 5 k.m.lead complete (Cattle manure measured

in stacks will reduced by 8% for Payment) 17.70 249.97 Cumt

Tree Plantation: Digging holes in ordinary soil and refilling the same with

the excavated earth mixed with manure or sludge in the ratio of 2:1 by

volume (2 parts of stacked volume of earth after reduction by 20%:

part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any,

with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) 2.14.3 Holes 60 cm dia, and 60 cm

deep 20.00 44.18 Cumt

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal

of unserveiceable material’s as per direction of officer in charge

(excluding cast of plant & water) Tree Plant 20.00 7.37 Ea

Providing New decorative Tree outdoor plants etc.incl. all labour

charges, transportation charges and material charges 20.00 239.37 Ea

Shrub Plantation: Digging holes in ordinary soil and refilling the same

with the excavated earth mixed with manure or sludge in the ratio of 2:1

by volume (2 parts of stacked volume of earth after reduction by 20% :

part of stacked volume of manure after reduction by 8%) flooding with

water, dressing including removal of rubbish and surplus earth, if any,

with all leads and lifts (cost of manure, sludge or extra good earth if

needed to be paid for separately) 2.14.4 Holes 45 cm dia, and 45 cm

deep 311.00 18.88 Ea

Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal

of unserveiceable material’s as per direction of officer in charge

(excluding cast of plant & water) Shrub Plant 311.00 3.68 Ea

Providing New Plantetion for Flower tree, Decorative outdoor plants

etc.including The work including cost of all materials, labour, plantation

with expertise, tranportation, loading, unloading, all taxes etc. complete

with Three years operation and maintanance after the plantation. The

work carried out as per directed by Engineer-in-charge.. Kashmiri

Gulab, Red Jasud 90.00 45.45 Ea

Vasant Mori, Hemeliya 90.00 56.56 Ea

Movari 44.00 39.39 Ea

Parijat 44.00 67.67 Ea

Karen 43.00 102.01 Ea

Providing erecting and fixing double coated ISI water tank of required

capacity each with all necessary fittings and connection etc. complete on

terrace 3000.00 3.95 Lit

Providing laying and jointing in true line and level 15mm dia. U.P.V.C.

Pipe (SCH- 40) for cold water including fittings as approved by engineer

in charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 326.60 72.65 Rmt

Providing laying and jointing in true line and level 32mm dia. U.P.V.C.

Pipe (SCH-40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials. 90.00 119.15 Rmt

Providing and fixing Gun metal check or non-return fullway wheel valve.

(D) 32mm dia. 2.00 314.72 Each

Providing and fixing C.P. Angle stop cock 15 mm Heavy duty with cap 16.00 407.42 Each

Providing laying (to level or slopes) and jointing reinforced concrete

Light duty non-pressure pipes I.S. Class NP2 of the following internal

diameter with collars and butt ends prepared for collar joints including

testing of joints complete. (B) 150mm 200.00 250.54 Rmt

Providing and fixing S.W. Gully trap with C.I. Grating brick masonry

chamber and water tight C.I. Cover with frame of 300mm x 300mm size

(inside) with standard weight. (i) Square mouth traps. (B) 150mm x

100mm size P or R type 10.00 1246.91 Ea.

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

dirt and other foreign mater and scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

lead. 255.80 36.74 Sqmt

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter. 255.80 92.20 Sqmt

SEATING BENCHES

Providing & Fixing Cast Iron powder coating garden bench capicity

seater and finishing & fixing as per instruction etc. complete.

Specification: 3 Seater Seating Capacity, decorative legs design,

powder coating finish, with back & arm rest, 150 kg weight bearing

capacity. Material: Side frame cast iron, Mild steel pipe 14 gauge seat &

back rest material. Dimension: 654mm Total Height, 327mm Seat

Height, 520mm width, 1501mm Seat Wide, 1 Year warranty period with

including all types of tax, loading, unloading, transportation, etc. 10.00 8080.00 Ea.

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF REFITTING & NEW PAVER BLOCK FLOOR

LOCATION : LATHI - LILIYA HIGHWAY ROAD, MOX DHAM, AT. LATHI

SCHEDULE - "B-18"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

BEAUTIFICATION WITH GREEN LAWN & PLANTATION

Dismentaling tiled of stone floors laid in mortar including stacking of

serviceable materilas and disposal of unserviceable materials with all

lead and lift 2178.00 49.11 Sqmt

Labor work for Refitting of paving block and completing work with

finishing and proper base of paving block, leveling the road.etc 2178.00 213.11 Sqmt

Excavation for foundation upto 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 80.30 157.15 Sqmt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 107.00 586.81 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (i) 40mm size aggregates 107.00 262.23 Cumt

Supplying of Stone Dust all lead and lift 26.80 288.25 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (ii) Sand/Stone dust 26.80 154.84 Cumt

Rolling and consolidating water bound macadam (Except laterite and

kankar) including watering not exceeding 150mm thickness (main layer

including binding materials) including filling in depressions which occur

during the process. (A) With power roller 1070.00 15.87 Sqmt

Providing and fixing pre cast Rubber Dye/ steel Dye inter locking

concrete block 60mm thick with grade of concrete M300 pnumatic

compressed/ vibrated mechanically and asper approved design

confirming to IS 15658:2006 including 35mm sand/stone dust/greet

layer for levelling and filling the joint with sand in proper line and level as

per guid lines of IRC : SP 63-2018 etc. complete. 535.00 706.93 Sqmt

Providing and casting in situ ordinary cement concrete M-200

forKerbs/Kerb blocks including formwork, curing and finishing complete. 16.80 4364.80 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF MINI GAZEBO (5 Ea.)

LOCATION : MOX DHAM, LATHI-LILIYA HIGHWAY ROAD, SMASHAN, AT. LATHI,

SCHEDULE - "B-19"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Excavation for foundation up to 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 65.90 157.15 Cumt

Providing and filling in foundation with ordinary Cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete.

Provinding and laying controlled cement concrete M-200 and curing

complete including the cost of formwork but excluding reinforcement for

reinforced concrete work in (A) Foundations, footings, Base of

Columns and Mass concrete.

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level. 294.70 77.28 Kg

Steel work, welded in built up sections framed work including cutting,

hoisting, fixing in position and applying a priming coat of red lead paint.

(A) In beams and joists, channels angles Tees, flats, with connecting

plates or angle cleats as in main and cross beams. Hip and jack rafters,

purlins conneted to common rafters and the like.

Providing corrugated G.I. sheet of class-3 roofing fixed with glavanished

iron J or L Hooks, Bolts and nuts 8mm diameter with bitumen and G.I.

limpet washer or G.I. limpet washer. filled with white lead complete

excluding the cost of purlins, Rafters and Trusses.(1) 0.80 mm thick

sheet. 92.90 734.19 Sqmt

Applying priming coat of over new steel and other metal surface after

and including preparing the surface by thoroughly cleaning, oil grease,

dirt and other foreign mater and scoured with brushes fine steel wool,

scrapers and sand paper with ready mixed priming paint brushing red

Painting two coats (excluding priming coat) on new steel and other

metal surface with enamel paint, brusing interior to give an even shade

including cleaning the surface an even shade including cleaning the

surface of all dirt, dust and other foreign matter.

Providing and laying Marble stone slab flooring over 20mm (average)

base of cement mortar 1:6 (1-cement : 6-coarse sand) and jointed with

grey cement slurry including rubbing and polishing complete. (A) Marble

slab 25mm thick 57.90 2231.50 Sqmt

Providing and laying Coloured glazed tiles of he size 300mm x 200mm x

8mm / 300mm x 450mm x 8mm in skirting, risers of steps and dedo on

10 mm. Thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry. 10.80 1488.23 Sqmt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK :- CONSTRUCTION WORK OF CC PARKING FLOOR

LOCATION : MOX DHAM, LATHI-LILIYA HIGHWAY ROAD, SMASHAN, AT. LATHI,

SCHEDULE - "B-20"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Clearing and grubbing road land including uprooting rank vegetation

grass bushes, shrubs, sapling and trees girth up to 300mm removal of

stumps of trees cut earlier and disposal of unserviceable materials (D)

By mechanical means in area of thorny jungle. 0.60 34889.38 Hec

Excavation for foundation upto 1.5mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff upto all

lead and sretta 187.50 157.15 Cumt

Crushed stone aggregate for machine cut quality (I) 40mm to 63mm

size all lead and lift 62.50 586.81 Cumt

Spredding the stone aggregate for roling and W.B.M. including filling the

interstices to required camber and gradient (excluding spreading of

blindage) (i) 40mm size aggregates 62.50 262.23 Cumt

Supplying of Stone Dust all lead and lift 15.70 288.25 Cumt

Spreading blindage or road crust filling the gaps in metal and leveling to

camber and gradient as directed. (ii) Sand/Stone dust 15.70 154.84 Cumt

Rolling and consolidating water bound macadam (Except laterite and

kankar) including watering not exceeding 150mm thickness (main layer

including binding materials) including filling in depressions which occur

during the process. (A) With power roller 625.00 15.87 Sqmt

Providing and filling in foundation with ordinary cement concrete M-100

mix and providing necessary vertical pin headers including formwork,

vibrating, ramming and curing complete. 62.50 3345.58 Cumt

Providing and casting in situ ordinary cement concrete M-200 for

average 75mm thick wearing coat laid as directed including tamping

,vibrating, finishing, curing and filling in joints with bitumen

complete.including cost of admixtures Melamine Base/ Naphthalene

Base using 1.5 Kg. per Cement Bage 62.50 4364.80 Cumt

Total Amounts Rs...……

Total Amounts Rs...……

Stamp with Signature of Contractor

Consl. Engineer Engineer

"DESIGN POINT" Lathi Nagarpalika

Chief Officer President

Lathi Nagarpalika Lathi Nagarpalika

LATHI NAGARPALIKA - LATHI

SCHEME :- SWARNIM JAYANTI MUKHYA MANTRI SAHERI VIKASH YOJANA UDP-88 YEAR-2025-26

NAME OF WORK:- PROVIDING & ERECTING 4.00MT HT DECORATIVE LED STREET LIGHTING POLE WITH

LOCATION : MOX DHAM, LATHI-LILIYA HIGHWAY ROAD, SMASHAN, AT. LATHI,

SCHEDULE - "B-21"

PERCENTAGE RATE TENDER

Item No. & Description Quantity Rate Per Amount

Supplying and erecting approved make Lighting pole made from GI steel

with Single Arms. The pole should be made as per IS. and shall be

coated with hot dip galvanizing as per IS 2629/ 2633/ 4759, suitable

suspend local wind speed with integral Junction box consist of terminal

plate of min 6mm Hylam sheet, standard profile 35mm X 7.5mm Din-

Rail for MCB Mounting, stud type terminal and arrangement for cable

termination to be erected With Suitable foundation (Included) as per

details given by manufacturer considering site requirement.

4 Mtr. Long Pole, Base 100-150mm & Top 50-60mm dia rectangle

and square shape, 2 to 4mm thickness. 4 Ea. Mounting Hole, 60Kg.

Weight. 401-500mm Single Arms, Black Colour, P.U. Painted. 30.00 18685.00 Ea.

Supplying and erecting LED street light/ Flood light fittings with high

power white LEDs wattage of 3 watt and above assembled on single

MCPCB, efficiency more than 130 lm/w and corrosion free High

pressure die cast aluminum housing with smooth finish powder coated

and heat sink extruded aluminium with diffuser and polycarbonate

optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95,

THD<10%, CCT 3000 K to 5700K, Uniformity ratio >0.45, Luminaire

efficacy>100 lumens/watt. LED driver efficiency> 85% as per approved

vender list make. (fittings required LM-79 & LM-80 certificates) (NOTE:

Below description have shown ranges of Wattage capacity of LED

fittings. The Engineer incharge may select any wattage capacity

between the ranges shown.)

(A) Street Light (IP-65), Surge protection -4KV integral and ,Light

must have 440VAC line supply with over-voltage protection. (ii)

above 48 to 60 Watts, Cat-III 30.00 4997.48 Ea.

Supplying & erecting IP 55 grade following size section pillar fabricated

from joint less M.S. Sheet with angle iron legs made from jointless M.S.

Angle with cable clamps to be buried in ground to have appropriate

erection to work uniform until erected with cement concrete foundation

and 45 cm high bricks work finishing with plaster etc. hinged double

door internally supported on both side, with internal and outside looking

arrangement with look and keys in duplicate 35x35x5mm M.S. Angle of

Two Nos. one is welded and other with nut and bolt for erecting Bakelite

sheet. Painting the Section Pillar inside and out side with three tank

powder coated paint. section pillar roof should be without joint with water

leakage proof & tested as per IP 55 test & followed by IS 2147 of

(C) 60 X 30 X 45 cm section pillar fabricated from 16 Gauge MS

Sheet with angle iron legs 45 cm long made from 35 X 35 X 5 mm

thick MS angle. 1.00 1884.66 Ea.

Supplying & erecting approved make time switch with single pole air

break contacts suitable for 230V. 15/16A. complete with self starting

motor driven clock ‘ON’&’OFF’ automatic arrangement at any

predetermined time during each 24 hours, With nickel cadmium

rechargeable battery backup erected as directed. 1.00 2354.31 No.

Supplying & erecting power contactor, AC 3 duty for time switch

complete erected as per direction Cat III (C) 4 pole 440V 16 Amp. 1.00 857.49 Ea.

Providing and erecting HOT deep Galvanised iron strip wire 8 to

Providing and erecting Pipe type earthing having 150 cms.long and

cms. dia. galvanised iron pipe with coupling and buch buried in specially

prepared earth pit complete with necessary 8 SWG earth wire. 30.00 368.65 Ea.

For using salt and charcoal / coke as required for pipe type earthing. 30.00 171.70 Ea.

Supplying & erecting earth pit of minimum bore dia. 150mm size

approved make Earthing Electrode consisting pipe-in-pipe technology as

per IS3043-1987 made of corrosion free hot dipped G.I. Pipes having

outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia

of 25mm having 200-250 Micron galvanising, connection terminal dia of

12mm with constant ohmic values urrounded by highly conductive

compound with high charge dissipation suitable for following type of

application swith chamber and heavy duty cover. (A) (approved make

OEM has to submit test certificate including value of earth resistance of

installation duly stamped and signed by agency and officer In charge