Construction of Pay and use Toilet Block at T.P. Scheme No. 21 (Bhestan), F.P. No. 50, Near Siddharthnagar slum area in South Zone-A (Udhna), Surat. (2nd Attempt)

Name of work : Construction of Pay and use Toilet Block at T.P. Scheme No. 21 (Bhestan), F.P. No. 50, Near

Siddharthnagar slum area in South Zone-A (Udhna), Surat. (2nd Attempt)

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Work up to Plinth Level

Excavation for foundation including sorting out and

stacking off useful materials and disposing of the excavated

1 stuff up to 50 mt. lead and all lift, watering etc.comp. (A)

loose or soft soil

Executed With Mechanised Efforts / Machinaries

(1) Up to 1.5 mt. Depth 98.50 C.M. 117.26

Boring holes 3.5 mt.deep in ordinary soil ( for cast in situ

2 piles) & disposal of the surplus excavated soil as directed

within a lead of 50 M. For following diameter of piles.

250mm dia 10.00 Rmt 326.84

Providing & Filling Rubbles including hand packing &

3 filling interstics with Quarry Spalls complete for all leads

Providing & laying C.C 1:3:6 (1cement : 3 coarse sand :

4 Crushed stone agg 20m.m Nominal size) &curing comp.

excl. cost of form work in :(a) foundation & Plinth

(A) Foundation 4.00 C.M. 3005.76

(C) Grade Slab 0.00 C.M. 3005.76 -

Providing & laying cement concrete 1:2:4 (1 cement :

sand : 4 graded stone agg. 20 mm nominal size) & curing

comp. Includ. cost of form work but exclu. Cost of

reinforcement for reinforced concrete work in : (A)

Foundation, footing, Base of columns and Mass concrete.

(C) Grade slab 14.00 C.M. 3637.34

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per

6 IS 456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(A) foundation, footing, base of columns and mass concrete

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per

7 IS 456:2000 (latest revision) and as per tender specification

in all items including cost of form work and rendering but

excluding cost of reinforcement

(1) Having cross sectional area up to 0.085sq.mt. 0.00 C.M. 12587.74 -

(2) Having cross sectional area more than 0.085 sq. mt .up

to 0.12 sqmt. 4.30 C.M.

(3) Having cross sectional area more than 0.12 sq. mt. 0.00 C.M. 9190.79 -

(1) Having cross sectional area upto 0.08 sq.mt. 0.00 C.M. 8994.86 -

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt. -

(3) Having cross sectional area more than 0.12 sq. mt . 13.50 C.M. 6999.09

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

8 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

Providing & fixing IS Mark TMT Bar FE 500d

9 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Upto G.L./P.L. 4257.00 Kg. 76.21

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

comp. - Ground Floor

Filling available excavated earth (excluding rock) in

trenches. plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each

disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected

12 soil in layers of 20cm. thickness including watering,

ramming and consolidating etc. complete.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Carrying out plinth treatment to post construction/existing

structure by spraying chemical solution for termite control

treatment including labour and material consisting with ISI

specification using chlordene and chiorpurfiles 20 EC as

13 per 6131_part II concentration weight one litter give 1% 104.00 S.M. 82.89

concentration inclusive of one litter chemicals emulsions

application at the rate of 5 litter chemicals /sqmt of surface

is recommended as per IS.

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand)

apply thick cement slurry and apply roller horizontal as

well as vertical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

Surface Preparation : surface is thoroughly clean, dry

15 and free from all loose dirt, chalk, grease, fungi,algae and 32.00 S.M 82.00

flaking paint. This can be achieved by brushing with a wire/

stiff coir brush, followed by water jetting if required. Fill up

all minor cracks and defects with white cement and sand

mixture in the ratio 1:3. For application on previously

painted wall, previous coatings of paint must be thoroughly

scraped off and Clean the surface thoroughly using wire

Priming: Apply a liberal coat of exterior acrylic primer and

allow it to dry for 4-5 hours.Application of putty is not

recommended. Minimum 4-6 hours duration is required

between each coat of weather shield max paint

Work Above Plinth

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

16 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(1) Having cross sectional area up to 0.085sq.mt.

Ground Floor 0.00 C.M. 12587.74 -

Terrace Floor 0.00 C.M. 12627.34 -

(2) Having cross sectional area more than 0.085 sq. mt. up

Ground Floor 5.00 C.M. 11136.62

Terrace Floor 1.00 C.M. 11176.22

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 9190.79 -

Terrace Floor 0.00 C.M. 9230.39 -

(1) Having cross sectional area upto 0.08 sq.mt.

Ground Floor 0.00 C.M. 8994.86 -

Terrace Floor 0.00 C.M. 9034.46 -

(2) Having cros sectional area more than 0.08 sq. mt and

upto 0.12 sq.mt.

Ground Floor 11.50 C.M. 8075.85

Terrace Floor 0.00 C.M. 8115.45 -

(3) Having cross sectional area more than 0.12 sq.mt.

Ground Floor 0.00 C.M. 6999.09 -

Terrace Floor 0.00 C.M. 7038.69 -

(1) Slabs having more than 8 Cm & upto 10 Cm thickness.

Ground Floor 0.00 C.M. 7887.74 -

Terrace Floor 0.00 C.M. 7927.34 -

(2) Slabs having more than 10 Cm & upto 13 Cm thickness.

Ground Floor 0.00 C.M. 7306.10 -

Terrace Floor 0.00 C.M. 7345.70 -

(3) Having more than 13 cm. Thickness

Ground Floor 13.00 C.M. 6727.93

Terrace Floor 0.00 C.M. 6767.53 -

Ground Floor 2.50 C.M. 9419.25

Terrace Floor 0.00 C.M. 9458.85 -

Ground Floor 1.50 C.M. 6913.25

Terrace Floor 0.00 C.M. 6952.85 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & laying C.C 1:3:6 (1cement :3 coarse sand :6

17 crushed stone agg. 20 m.m Nominal size)& curing comp.

incl. cost of from work in: wall caps/ copings

Providing, mixing, placing, compacting by machine

vibrator, curing, testing M25 Design mix concrete as per IS

18 456:2000 (latest revision) and as per tender specification in

all items including cost of form work and rendering but

excluding cost of reinforcement

(A) Stair cases including landing etc.

Ground Floor 0.00 C.M. 7158.83 -

(B) Vertical and horizontal fins

Ground Floor 0.00 C.M. 9030.72 -

Providing & fixing IS Mark TMT Bar FE 500 / FE 500d

19 reinforcement for R.C.C. work incl. bending, binding &

placing in position etc.comp.---

Ground Floor 4320.00 Kg 76.21

Terrace Floor 85.00 Kg 77.21

Providing & construction brick work using Fly Ash bricks

having crushing strength not less than 35 Kg./sq.cm. in

foundation & plinth in C.M. 1:6 (1 cement:6 sand ) etc.

Ground Floor 49.00 C.M. 4511.97

Terrace Floor 5.00 C.M. 4786.95

Providing & constructing Half brick masonary in Fly Ash

21 bricks having crushing strength not less than 70 kg/sq.cm in

c.m 1:4 (1 cement: 4 sand) curing etc complete.

Ground Floor 159.00 S.M. 678.86

Terrace Floor 0.00 S.M. 685.11 -

Providing & Applying 15mm.th.cement plaster in single

coat on brick/concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

22 slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

(A) for wall and similar surfaces

Ground Floor 517.00 S.M 237.51

Terrace Floor 45.00 S.M 265.65

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & Applying 10mm.th.cement plaster in single

coat on brick/ concrete walls similar surfaces for plastering

& finished even & smooth with a floating coat of cement

slurry mixed with admixture of lime or neeru in required

proportion etc. comp. in C.M 1:3 (1 cement : 3sand) (A)

For wall and similar surfaces -- Ground Floor

(B) for ceilings and soffits of stairs

Ground Floor 101.00 S.M 214.60

Providing and fixing 150 mm wide, approved quality

chicken wire mesh (FRP / PVC)at junction of brick work

and RCC work or two dissimilar surfaces, at all heights

fixed by nails, rowal plugs or tag by cement mortar 1:3

before applying the plaster, including curing, scaffolding all

complete as directed.

Ground floor 31.00 S.M. 102.00

First floor 3.00 S.M. 102.00

Providing & Applying 20mm. Th. Heavy Roller plaster on

walls or similar surfaces at all floor levels consisting of

mm av. Th. Backing coat of C.M. 1:3 (1 cement:3 sand) &

8 mm. th. Finishing coat of C.M. 1:1 (1cement: 1 sand)

25 apply thick cement slurry and apply roller horizontal as

well as vartical ( two times ) up to good quality and size of

grain in elevation as per directed by engineer incharge.

Ground Floor 134.00 S.M 324.00

Terrace Floor 35.00 S.M 324.00

Providing throating or plaster drip and moulding it to

R.C.C. chajja etc.comp.. For all floor

Ground Floor 24.00 R.M 41.66

Providing 20 mm deep finished groove in plaster in line

and level etc. Comp. For all Floor (M.R.)

Ground Floor 12.00 R.M 50.00

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in flooring treads of steps and landing laid on a bed of

28 12mm thick cement mortar 1:3 (1 cement : 3 coarse sand)

finishing with flush pointing in white cement. (Basic Rate-

Ground Floor 0.00 S.M 1040.35 -

Providing and laying Vitrified tiles 8 to 10 mm thick, 24" x

24" in skrting risers of steps and dedo on 10mm thick

cement plaster 1:3 (1 cement : 3 coarse sand) and jointed

with white cement slurry.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Ground Floor 381.00 S.M 1081.71

Providing & laying Vitrified tiles of 8mm thick of Orient,

Kajaria,Jhonson, Nitco, Somani, Bell, Asian or Euro make

in flooring,treads of steps & Landing laid on bed of 20 mm

(Average) base of cement mortar 1:6 (1 Cement : 6 Coarse

30 sand) on new surface or fixing on existing flooring by

adhesive material including dismentaling of existing

flooring and jointed with colour cement slurry including

finished with flush pointing & cleaning the surface etc.

comp.Size 24" x 24" For Antiskid tiles

Ground Floor 86.00 S.M 1397.83

Providing and laying polished Kota stone slab flooring over

20mm (Average) thick base of cement mortar 1:6 (1-

cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 -

coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including

rubbing and polishing etc. complete. (A) 25mm thick

Ground Floor 10.00 S.M 989.45

Providing and laying polished kota stone slab 25mm thick

in risers of steps,skirting Dedo and pillars laid on 10mm

thick cement mortar 1:3 (1-Cement : 3 coarse sand) and

jointed with gray cement slury mixed with pigment to

match the shade of slab including rubbing and polishing

Ground Floor 1.00 S.M 1076.94

Providing and constructing sandwitch type Granite stone

platform 0.6 mt. wide & 0.75 mt. height, including one end

side granite stone (Double Polish) of 1.25 mt. height &

front granite stone patti of 10 cm wide, vertical partitions of

half B.M. wall in C.M. 1:4 and 10mm th. plaster in 1:3 with

33 finishing smooth with cement slurry as required and

Stainless Steel sink of 0.45 mt x 0.45 mt size of approved

quality and make with required all fitings & fixitures etc.

comp as per instruction given by site in charge at all floors.

(Basic rate of Granite Rs.1,200.00 / S.M.)

Ground Floor 0.00 R.M. 3128.00 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and filling in depressions of Bath and W.C. At

all floor levels, after completing plumbing work of pans,

pipes,traps etc.with cinder or fly ash as directed by

Engineer in charge etc. comp.For all Floors.

All Floor 0.00 S.M 500.00 -

Providing & fixing 35mm.th. Indian teak wood shutters

for doors, windows &clearstory windows incl. Indian teak

wood frames of finished size 12cm x7cm.incl. anodized

aluminum fixtures & fastenings incl. Primer coat of

approved quality & two coats of oil painting etc. For all

Floor (A) Fully Panelled

All Floor 0.00 S.M 5533.68 -

Providing and fixing FRP frame size 125x65 mm and

mm thick FRP shutter with wood grain raised panneled

design finish shutter having extra reinforcement on sides

& edges in Gel coat finish. The core of the shutter & frame

is to filed up with injected polyurethane foam done in situ

along with embedded wooden pieces for stiffening & also

taking hinges & fintures. The whole FRP frame & shutter is

to be water proof weather proof, termite proof & resistance

to mild acid/alkali. Rates are to be inclusive of S.S. hinges

with fastener sleeve & alluminium fixtures & fasteningsFor

Providing & fixing 35mm.th. Flush Door Solid Double

Core type Both Face water proof Ply Vennered &

mm th.laminate shall be pasted on both side with adhesives

as specified by the manufacturers. The laminate shall be as

per approved shade & texture, of make incl. Sal wood

frames of finished size 12cm x 7cm.incl. S.S. Hinges with

nessary screws & Anodized aluminum fixtures & fastenings

Same as Above But Without Frame

All Floor 16.00 S.M 2520.00

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 63.50 x

38.10 x1.95 mm (of Jindal section no.4605, @ Wt.

1.094Kg/mt) horizontal Two track member size 61.85 mm

x 31.75 mm x 1.20 mm (of jindal section no:8687, @ Wt.

0.695 Kg/mt.) vertical member of size 61.85 mm x

mm x 130 mm (of jindal section no:8758 @ wt. of

kg/mt) with sliding shutters of horizontal member size

38 mm x18 mm x 1.29 mm ( of jindal section no:8949, @ Wt. 0.00 S.M 1705.67 -

of .456 Kg/mt) vertical member of size 40 mm x 18 mm x

1.29 mm (of jindal section no:8947, @ Wt. of

Kg/mt/section 8948, @ Wt. of 0.457 Kg/mt) with 5 mm

thick tranparent bronze colour tineted float glass with

powder coated aluminium fittings and fixtures and

transparent silicon sealant glass fixing to frame as per

details etc. complete for window.For all Floors.

(A) Same as above but colour anodized 2.00 S.M 1705.67

Providing and fixing window having extruded aluminium

colour anodized section frame main outer size 95 mm x

mm x 1.17 mm (of jindal section no:2459 @ Wt. of

Kg/mt), horizontal Three track member size 92 mm x

31.75 mm x 1.30 mm (of jindal section no;8688, @ Wt.

1.07 Kg/mt), vertical member of size 92 mm x 31.75 mm x

1.50 mm (of jindal section no:8933, @ Wt. 1.06 Kg/mt)

39 with sliding shutters of horizontal member size 40 mm x 18 0.00 S.M 1591.87 -

mm x 1.29 mm (of jindal section no:8947 @ wt. of

kg/mt), vertical member of size 40 mm x 18 mm x 1.29 mm

(of jindal section no:8949 @ wt. of 0.456 kg/mt) with 5 mm

thick transparent bronze colour tinted float glass with

powder coated aluminium fittings & fixtures and

transparent silicon sealant glass fixing to frame as per

(A) Same as above but colour anodized

All Floor 0.00 S.M 1591.87 -

Providing and fixing standared extruded of alluminium

section of size 63mm x 38.10mm x1.2mm , @ Wt.

40 Kg/mt with colour Powder Coated alluminium frame for 0.00 S.M 2414.00 -

ventilation with 5 mm thick frosted glass as details etc

complete for Ventilation

A) Same as above but Colour anodized 8.00 S.M 2414.00

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & laying granite slab 18 mm thick in Window-

Door seal,Frames Etc laid on 10 mm thick cement mortar

1:4 (1 Cement: 4 Coarse sand) with necessary adhesive

41 material and finished with flush pointing in white or colour

cement, including rubbing & polishing comp. (Basic Rate:

Rs. 1000.00/S.M.).For all Floors.

For all Floors. 49.00 S.M 2026.00

Labour Charges For Edge Finished For Granite for all

For all Floors. 490.00 R.M 43.43

Providing & fixing Powder Coated Aluminium partly glazed

and partly panelled partition using medium duty sections of

Hindalco,Zindal, Narmada, Banco or Equivalent approved make

having section 63.50 mm x 38.10mm ( Frame-.758 kg/rmt &

Middle section- 0.819 Kg./rmt), Galzing Clip with 5 mm thick

clear float glass of approved make including all other necessary

43 fittings and fixtures. Entire work will have to be made water

proof using necessary rubber sectioned wherever required. Gaps

all round the frame to be filled with approved water proof

sealent. Bottom portion of doors both side to be covered with

12mm thick prelaminated particle board of approved make and

quality and as per design.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 2400.00 -

Providing & fixing partly panel & partly glass Powder

Coated Aluminium doors with aluminium section of Hindalco,

Jindal , Narmada,Banco or Equivalent approved make having

Poder Coated outer frame Leg Partition section of 63.50 mm x

38.10 mm having weight 1.158 kg. / R.M. shutter section having

size 83.5 mm x 44.45mm ( top & bottom: 1.384 kg./rmt. and

middle 1.139 kg./rmt.) door vertical 47.62mm x 44.45 mm (

44 vertical:0.881 kg./rmt. & top hing side:0.974 kg./mt.), Glazing

Clip (Jindal Section No. 19370 Wt. 0.109 Kg./ Mt.) with 5mm

thick sheet glass in acid frogting and 12 mm thick prelaminated

sheet of Greenlam, Panama or archid make as approved by

Engineer-in-charge including fixing brass pivot, handle, lock etc.

(A) Same as above but Colour anodized

For all Floors. 0.00 S.M 3237.00 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & fixing M.S.Grills of required pattern to

wooden frames of windows etc. At all floor levels with

M.S. flats at required spacing & frame around square or

45 round bars with round headed bolts & round headed bolts

and nuts or by screws incl. Priming coat of Red lead paint

etc. comp. (A) Plain grill For all Floors

(A) Plain grill

For all Floors. 0.00 Kg. 104.20 -

Painting two coat (excluding priming coat) on new steel

and other metal surface with synthetic enemal paint,

46 burshing to give an even shade including cleaning the

surface of all dirt, dust and other foreign matters. (A) For

plain grill For all Floor

For all Floors 1.00 S.M 65.31

Providing and fixing stainless steel (Grade 304) railing

made of Hollow tubes, channels, plates etc., including

welding, grinding, buffing, polishing and making curvature

(wherever required) and fitting the same with necessary

stainless steel nuts and bolts complete, i/c fixing the railing

with necessary accessories & stainless steel dash fasteners

stainless steel bolts etc., of required size, on the top of the

floor or the side of waist slab with suitable arrangement as

per approval of Engineer-incharge, (for payment purpose

only weight of stainless steel members shall be considered

excluding fixing accessories such as nuts, bolts, fasteners

(1) The whole work is to be executed through specialized

agency with a guarantee of 10 (Ten) years given on a

48 prescribed proforma duly stamped (2) The rate shall include

for work at all floors & conducting water proof test as

directed. (M.R.)

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

B) Providing and laying integral cement based water

proofing treatment including preparation of surface as

required for treatment of roofs, balconies, terraces etc.

consisting of following operations. (a) Applying and

grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound

comforming to IS:2645 over the R.C.C. slab including

cleaning the surface before tratment.(b) Laying cement

concrete using broken bricks/brick bats 25 mm to 100 mm

size with 50% of cement mortar 1:5 (1 Cement : 5 Coarse

sand) admixed with proprietary water proofing compound

conforming to IS:2645 ,brick bats is finally covered by

jointless cement plaster 20mm th. in C.M. 1:4 added with

special water proofing compound confirming to IS:2645 &

top smooth finished with trowel with false chequered

marking of 300 mm.size.The treatment is carried along the

vertical surface of the parapet & other adjoining wall up to

height of about 300 mm in a shape of quarter round vata

Incl. curing etc. Comp. With average thickness of 120 mm

and minimum thickness at khurra as 65 mm.

(c) The whole terrace so finished shall be flooded with

water for a minimum period of two weeks for curing and

for final test. All above operations to be down in order and

as directed and specified by the engineer-in-charge. With

average thickness of 120 mm and minimum thickness at

khurra as 65 mm. (Cement consumption 0.511 Bags / S.M.)

Terrace and staircabin top 107.00 S.M 511.00

(A) Providing and laying water proofing treatment to

vertical and horizontal surfaces of depressed portions of

W.C.,kitchen and the like consisting of :

(a) I course of applying cement slurry @ 4.4 kg/sqm mixed

with water proofing compound conforming to IS : 2645 in

recommended proportions.

(b) II course of a layer of plaster in C.M. 1:3 with water

proofing compound confirming to IS:2645 about 25 mm. th'

in the floor of the depression & about 18mm th' On the side

walls of the depression up to the floor level, water

proofing plaster about 18 mm. th' be continued on the walls

above the floor level for a height of 600 mm. with surface

suitable to receive further treatment

(c) Finishing top with stone aggregate 10mm to 12mm

nominal size spreading @0.008 C.M./S.M., thoroughly

embedad in plaster layer.

as per specifications & instructions of Engineer in charge

(Cement consumption 0.316 Bags / S.M.)

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

For all Floors 0.00 S.M 296.00 -

Providing and laying broken china mosaic flooring for

terrace using 12 mm to 20 mm broken pieces of glased

tiles of to be laid over cementr morter 1:3 to plain or slope

49 and to be tempered to bring morter crème out up to surface

using white cement including grounding off jnctions and

extending them up to 15 cm along the wall, clearing with

water and oxalic acid etc as directed.

Apply two coats of putty and two coats of primer of

approved brand and manufacture on new wall surface to

50 give an even shade including thoroughly brushing the

surface free from mortar dropping and other matter and

sand papered smooth.

(A) for wall and similar surfaces

For all Floors 562.00 S.M 40.59

(B) for ceilings and soffits

For all Floors 101.00 S.M 40.59

Wall painting (two coats) with plastic emulsion paint of

approved brand and manufacture on undecorated wall

51 surface to give an even shade including throughly brushing

the surface free from mortar droppings and other foreign

matter and sand papered smooth.

(A) for wall and similar surfaces

For all Floors 562.00 S.M 79.39

(B) for ceilings and soffits

For all Floors 101.00 S.M 79.39

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & applying two coats of weather shield max

paint (3 coats may be required in case of darker colours.)of

ICI Dulux or Apex Ultima of Asian Paint including

applying exterior acrylic primer coat as per manufacturers

specification and directions in shade and colour approved

by architects, on exterior surfaces of the building including

scaffolding, preparing the surface, watering, curing etc.

complete and as directed by the architects and

manufacturers. Surface Preparation : surface is

thoroughly clean, dry and free from all loose dirt, chalk,

grease, fungi, algae and flaking paint. This can be achieved

by brushing with a wire/ stiff coir brush, followed by water

jetting if required. Fill up all minor cracks and defects with

white cement and sand mixture in the ratio 1:3. For

application on previously painted wall, previous coatings of

paint must be thoroughly scraped off and Clean the surface

thoroughly using wire brushes. Priming: Apply a liberal

coat of exterior acrylic primer and allow it to dry for 4-5

hours. Application of putty is not recommended. Minimum

4-6 hours duration is required between each coat of weather

For allmax paint.For all Floors.

Floors 169.00 S.M 82.00

Providing & laying granite slab 18mm thick in flooring,

treads of steps and landing laid on bed of 20mm thick

cement mortar 1:6 (1 Cement : 6 coarse sand) or lime

mortar 1:1.5 laid and finished with flush pointing in white

or colour cement including rubbing and polishing complete.

(Basic Rate:- Rs.1347.46/S.M.)

For all Floors. 6.00 S.M 2410.00

Providing & laying granite slab 18mm thick in skirting,

risers of steps,dedo and pillars laid on 10mm thick cement

mortar 1:4 (1 Cement : 4 Coarse sand) and finished with

flush pointing in white or colour cement including rubbing

& polishing comp.. (Basic Rate:- Rs.1347.46/S.M.)

Providing and fixing M.S. Fan clamps type 1 to 16 mm dia

M.S. bar bent to shpe with hooked ends to RCC slabs

curing, layig including painting the exposed portion of

loops, all as per standard design complete.

For all Floors. 4.00 Nos 129.02

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Steel work welded in built up sections, framed work

including cutting, hoisting, fixing in position and applying a

priming coat of red lead paint (A) in beams & joists

channels angles, tees, flats with connection plates or angle

cleats as in main & cross beams,hip & trussed purlins

connected to common raffers & the like. For all Floor

For all Floors. 0.00 Qtl. 9047.86 -

Providing & fixing in position collapsible steel shutters

with vertical channels 20 x10 x 2 mm. Braced with flat iron

diagonals 20 x5mm size with top & bottom rails of T-iron

40x40x6mm. with 38mm dia. steel pulleys comp. with

bolts, locking arrangements, stoppers, handles incl.

applying a priming coat of Redlead paint etc. comp.

Ground Floor 6.00 S.M 5865.10

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for Shelve joined with

grey/White cement slurry (1:1) incl. Rubbing & polishing

etc. complete. (M.R.) (Basic Cost Rs. 450/S.M.)

Wall Vinyl Sticker SQ.

Eco Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

Solvent Vinyl Sticker (120 gsm) with Lamination (100 SQ.

5mm PVC sheet Eco Vinyl (Any size) SQ.

Decorative theme base designing & painting with all SQ.

waterproof materials FT.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and fixing rebar of following diameter using

chemical grout of Swanchore/Hilti/Fischer or equivalent

make including cost of all equipments, tools, material,

labour, etc. Standard procedure as mentioned in

manufacturer's specifications shall be strictly followed,

which shall be submitted and got approved from the

authority prior to start of work. The rate shall also include

cost of drilling of hole of required diameter and depth as

mentioned in manufacturer's specification, cleaning the

hole with required air blower and other necessary tools and

tackles, positioning, providing and grouting chemical,

allied fixtures and fasteners, etc. but excluding the cost of

reinforcing bar etc. complete. Item

includes necessary scaffolding, staging, labour, tools and

equipments, etc. complete as directed by the engineer-in

Water Supply & Sanitation

Prov.& Fixing water closet squatting pan (Orissa type

W.C.pan) at all floor levels, size 500mm x 400 mm incl.

100 mm size "P'or "S" trap for water closet squatting pan

65 joining the trap with the pan & soil pipe in C.M. 1:1

(1cement :1 fine sand) etc. Comp.(A) Vitreous china long

Make- Cera S3010109, Parry ware C0117CS/C0117*

Jaquar ,HindWare

For all Floors. 2.00 Nos. 3275.00

Providing and fixing Wash Down Water closet European

type W.C. pan with integral P or S trap with normal

closing seat cover L bend ncluding jointing the trap with

soil pipe in cement mortar 1:1 (1 cement : 1 find sand) (A)

Viterous china pattern - I

Make- Cera CONVENTIONAL B1510121 , Parry ware

C0297*/ C0278, HindWare sleek 20011, Jaquar- CNS-

WHT-751P180SPPZ

For all Floors. 15.00 Nos 3282.00

Prov.& Fixing Health Faucet ABS Body with wall Hook

67 and 1 Meter chrome plated PVC Hose Pipe

Make- Cera F8030106AB, Parry ware T9874A1, Jaquar

ALD-587 ,HindWare F160109

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

For all Floors. 0.00 Nos 971.00 -

Providing Metropole Flush Valve Dual Flow 40mm

68 Size (Concealed Body)

Make- Cera F8010202 , Parry ware T3302A1 , Jaquar FLV-

1089NSQ ,HindWare F860075

For all Floors. 15.00 Nos 3465.00

Providing & fixing Wash Hung basin with single hole for

pillar tap , Size- 550 x 400 mm at all floor levels, with C.I.

or M.S. Brackets painted white incl. cutting holes &

making good the same etc. complete. For all Floor

Make- Cera Cat. No. S2040121, Parry wareC0434* (CTH),

Jaquar SLS- WHT -6801 ,HindWare10004

For all Floors. 7.00 Nos 2656.00

Providing & fixing 600 mm.x 450 mm. mirror of superior

glass at all floor levels, mounted on 6 mm. th. A.C. sheet

or plywood sheet & fixed to wooden plugs with C.P.brass

screws and washers etc. For all Floor

All Floor 7.00 Nos 833.73

Providing & fixing C.P. brass pillar cock with copper

connection, C.P. brass screws complete

Make- Cera F2013101, Parry ware Cat. No.: G3102A1,

HindWare Cat. No.: F650003, Jaquar FLR-5011N

For all Floors. 7.00 Nos 1423.00

Providing & Fixing 15 mm Dia bib tap with wall Flange at

all floor levels, polished bright etc. comp

Make- Cera F2013151 BIB COCK, Parry wareG3104A1,

HindWare F280002 BIB COCK, Jaquar FLR-5047 N BIB

All floor 30.00 NO 1323.00

Providing & Fixing 15 mm Dia 2 way bib tap with wall

Flange at all floor levels, polished bright etc. comp

Make- Cera F2013163, Parry ware G4834A1, HindWare

Cat. No.: F530004, Jaquar FLR-5041N

All floor 5.00 NO 1755.00

Providing flush cock consisting lever, cartridge sleeve &

flange & concealed part

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Make- Cera EXPOSED PART F2013751 &Concealed part

F4060101 , Parry ware T9824A1&T9823A1, Jaquar FLR

5083 KN , CONCEALED BODY ALD-081,HindWare

F280052 & CONCEALED STOP COCK F850105

All floor 0.00 NO 2110.00 -

Providing & fixing 15mm C.P. brass angle valve (Stop

Cock) with C.P. copper connecting pipe 450 mm long and

nuts, washer and brass flange complete, including cutting

and making good the wall where required.

Make- Cera F1020362, Parry ware T0712A1, HindWare

Cat. No.: F440020 F850094, jaquar CON 053 KN

For all Floors. 7.00 Nos 1432.00

Providing and fixing Towel Ring fabricated from seamless

stainless steel tube 2mm thick in bath room with polished

wall flange at end of bars with heavy duty anchor fasteners

Make- Cera F5014115CH, Parry ware F5014115CH, Jaqua

ACN 1121N ,HindWare F880007

For all Floors. 7.00 Nos 890.00

Providing & Fixing stainless steel recessed type Soap dish

77 of approved make. Including providing & fixing screws,

washers, cutting & making good the walls.

Make- Cera F5007106, Parry ware T6902A1, Jaquar ACN-

1131N,HindWare F880011

For all Floors. 7.00 Nos 793.00

Providing & fixing of overhead shower 80 mm (3”) dia

78 with 3 flow with Overhead Shower arm 200 mm with wall

flange complete

Make- Cera F7010602AB, Parry ware, Jaquar OHS-1989

,HindWare Cat. No.: F160144

For all Floors. 3.00 Nos 1569.00

Providing and fixing PVC SWR Nahni trap IS 14735 for

drain - 75 mm diameter with jali of the following nominal

79 diameter of self cleaning design with C.I. scread down or

hinged grating including the cost of cutting and making

good the walls.

All floor 10.00 558.36

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & Fixing U-PVC pipe (SWR) confirming to IS

no. 13592 (Type"B") of Prince/ Supreme/ Jain/ Astral/

Tulsi/ Finolex make for soil and waste discharge system at

all floor levels incl. All fixtures like bends, tees,shoe etc.

jointed with resin of approved brand & manufacture etc.

Providing & fixing U-PVC pipes Confirming to IS no.

13592 (Type "A") of Prince/ Supreme/ Jain/ Astral/ Tulsi/

81 Finolex make for rain water at all floor levels incl. fixtures

like bends, tees, shoe etc joined with resin of approved

brand & manufacture etc. comp. (M.R.)

Providing and fixing in position P.V.C. cowl vent to pipes

82 of prince, suprime, jain Or Eqivalent make etc. comp

Providing & Fixing Kathi around the vertical PVC drainage

pipes for concealing with cement plaster 20 mm avg

thickness(CM 1:3 [1 cement :3 coarse sand]) finishing as

per instruction given by Eng. incharge. For

75mm PVC pipe 20.00 R.M 173.00

Providing, Laying and jointing on true line and level UPVC

pipe (SCH-40) line of prince/Supreme/Jain/Astral/

Tulsi/Finolex make including fittings make or equivalent as

approved by angineer-in-charge. Pipe shall be fixed on the

84 wall the help of clamp at every two meter C/C or shall be

concealed as directed including necessary fittings etc.

including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & Fixing P.V.C. pipes (SCH-80) of Prince/

Supreme/ Jain/ Astral/ Tulsi/Finolex make for water

supply line at all floor levels incl. fixtures like bends, tees,

shoe etc joined with resin of approved brand &

85 manufacture etc. comp. Pipe shall be fixed on the wall the

help of clamp at every two meter C/C or shall be concealed

as directed including necessary fittings etc. including

testing of pipe and joints and fixing the same with adhesive

solvent, including cost of all materials.

Providing and fixing M.S. holder bat clamps at all floor

level,of approved design to C.I. or S.C.I pipes including

cost of cutting holes and making good the wall etc. comp.

Providing and fixing G.I. holder "Z" clamps at all floor

87 level,of approved pipes including cost of cutting holes and

making good the wall etc. comp. (M.R)

(C) 150 mm to 200 mm dia 0.00 NO 98.00 -

Providing and fixing gun metal check or non return full way

wheel valve at floor levels,etc. complete.

Providing and fixing abonite ball cock of approved quality

as directed etc. comp.

Providing, Lowering and laying joining R.C.C. NP2

CLASS pipe in cement mortar in proportion 1:1 of

following nominal internal diameters including testing of

pipes and joints etc. complete.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and fixing s.w. Gully trap with C.I. gratting

brick masonary chamber and water tight Pre cast

R.C.C.cover of 300mm X 300mm size (inside) including

plastering smooth inside and outside 15 mm thick in C.M

1:3 etc. comp.i) square mouth traps (A)300 MM X

MM Size - P type.For all Floors.

Prov. & Fix. 10 cm.x15 cm.(4" x 6") S.W. trap with

Inside dimension ,455 x 610 mm & 450 mm deep sewer

trap chamber with 23 cm th' B.B. masonary walls in C.M

1:5 with cement plaster 15 mm th' in C.M. 1:3 inside &

outside to exposed faces, R.C.C. top slab with 1:2:4 mix (

cement: 2 Sand : 4 Grade stone aggregate 20mm size)

,Foundation concrete 1:5:10 & fixing C.I. cover with frame

to be not less than 38 kg. On top etc. comp. for single

pipe.'.(A) Precast RCC heavy duty Cover instead of C.I.

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

Providing & construction simple chamber of 23 cm. th'

B.B. Masonary in C.M 1:5 with cement plaster 15 mm th' in

C.M. 1:3 inside & outside to exposed faces, R.C.C. top

slab with 1:2:4 mix ( 1 cement: 2 Sand : 4 Grade stone

aggregate 20mm size), Foundation concrete 1: 5: 10 &

fixing C.I. cover with frame to be not less than 38 kg. On

top etc. comp. Inside dimension, 455 x 610 mm &450 mm

deep for single pipe

(A).Same as above but Precast RCC heavy duty Cover

instead of C.I. Cover

Extra for every additional depth of 0.1 mt.beyond 0.45 mt.

Providing and fixing C.I. Machinehole cover 0.60 x

94 mt. Size having weight not less than 35 Kg. etc. complete.

Providing and fixing G.I, Rain water spout of 50 mm dia

and 30 cm Length

Providing & fixing white vitreous china urinal of size

x325mm as per IS-2556 (Part-2 ) with C.I. hangers and

96 15mm dia. C.P. spreader,32mm dia CP bottle trap and pipe

to wall with C.P. flange complete including cutting and

making good the walls and floors wherever required.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Make- CeraCat. No. S4020103, Parry ware C0501*, Jaquar

URS-WHT 13261H ,HindWare BACK SMALL 60001 5.00 NO 2476.00

Providing & fixing at all floor levels,both face polished

machine cut edge Marble slab for urinal partition joined

97 with grey/White cement slurry (1:1) incl. Rubbing &

polishing etc. complete. (M.R.)( Basic Cost Rs. 450/S.M.)

Providing & laying ordinary C.C.1:1.5:3 mix for R.C.C.

work incl. boxing, centering, vibrating, curing & mixed

with approved water proofing cement compound or

"CEMWET"or"PIDICRETE LW"integral water proofing

admixture as water proofing agent to be mixed with 50 kg.

cement bag shall be as recommended by the manufacture of

the water proofing material, concrete work for top, bottom

slab & side pardi for under ground Tank & Item incl.

Necessary excavation & refilling the available earth, 15 cm

98 th' C.C 1:4:8 for bedding concrete, Half B.M. in C.M. 1:4

outside wall, inside R.C.C. pardi as per design, 10mm.th.

water proofing cement plaster in C.M. 1:3 with smooth

finishing,watering etc.Comp.to all inner face of tank curing

etc. comp. incl. Locking arrangement, outlet, inlet,

overflow & wash out pipe arrangement as necessary & C.I.

Cover 0.60 x .045 weight not less then 35kg. etc. com. as

per structural drawing excluding Steel & as directed by

Engineer-in-charge

Under Ground water Tank 5000.00 Lit 5.46

Providing & Laying white glazed tiles 6mm. th. of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor

99 levels, in flooring, treads of steps & landings laid on a bed

of 12 mm. Av. Th.C.M.1:3 (1cement : 3 sand) finished with

flush pointing in white cement etc.com. For all floors

Under Ground water Tank 2.00 SM 857.42

Providing & Laying white glazed tiles 6mm. th. Of Orient,

Kajaria, Jhonson, Nitco, Somani, Bell make at all floor

levels in skirting risers of steps & dado on 10 mm. th.

C.M.1:3 (1cement :3 sand) including necessary cement

paste for fixing and joined with white cement slurry

etc.complete. For all floors

Under Ground water Tank 13.00 SM 887.64

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & fixing IS Mark TMT FE 500D reinforcement

101 for R.C.C. work incl. bending, binding & placing in

position etc. comp. Upto G.L./P.L.

Upto G.L./P.L. 450.00 Kg. 76.21

Providing erecting and fixing double coated

Sintex/Super/Reno PVC (ISI) mark water tank of required

capacity each with all necessary fittings & connection etc.

complete on terrace.

INTERNAL WIRING

Point wiring for Light / Bell with 2-1.5 sq.mm & earth

wire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV

grade FRLS PVC insulated multi strand copper wires up to

10 mtr length , in below type of pipe erected with 6A

Modular type switch / bell push & accessories and earth

continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured/metallic/white front plate modules erected on

/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. III

2 (For point wiring in bathroom and W/C and washbasin area 0 Pt. 224.73 -

in residential quarters reduce overall rate by 50% of point

wiring for light.)

Point wiring for secondary light point with 2-1.5 sq.mm

& earth wire of 1.5 sq.mm (green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multi strand copper

wires, in below type of pipe to be erected complete with

earth continuity and necessary connection with primary

light with accessories erected on Metal / PVC / wooden

box covered covered with appropriate front plate modules

3 erected on / in wall / ceiling for open / concealed wiring. 1 Pt. 151.50

with necessary Lamp holder / ceiling rose / H.D.Connector

as directed.as per pipe erected with following type of

Note:- Maximum up to 6 mtrs length, excess will be

considered as Mains for Secondary Point.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Point wiring for FAN with 2-1.5 sq.mm & earth wire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade

FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular

type switch and hum free EME step type electronic fan

regulator mounted and accessories with earth continuity of

4 following type erected on PVC / Metallic/Wooden box, 2 Pt. 629.23

single mounting base frame covered with

textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu.

Wire from nearby switchboard/mcb db board

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire of

sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS

PVC insulated multi strand copper wires up to 10 mtr

length, in below type of pipe erected complete with

Modular type switch & 5 pin Plug erected on PVC /

Metallic/Wooden box covered with appropriate front plate

modules erected on / in wall / ceiling as per pipe erected

with following type of accessories.

[II] For 16A Plug and 16 amp switch with 2-2.5 sq.mm

Cu. Wire from mcb db board.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for Individual Plug with & earth wire both

are of ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of

pipe erected complete with Modular type switch & 5 pin

Plug erected on PVC / Metallic/Wooden box covered with

appropriate front plate modules erected on / in wall / ceiling

as per pipe erected with following type of accessories.

[III] For 16A Plug and 16 amp switch with 2-4 sq.mm

Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

Point wiring for on board Looped Plug with 6A Modular

type switch & 5 pin socket erected on PVC /

Metallic/Wooden box, single mounting base frame covered

with textured / metallic/white front plate modules erected

on / in wall / ceiling with following type accessories, Cat.

Point wiring for Two Way Controlled Light Point with 2-

1.5 sq.mm & earth wire of 1.5 sq.mm (green) both are of

.ISI marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires erected in below type of pipe with 6A

Modular type switches and following type of accessories

erected on PVC / Metallic/Wooden box, single mounting

base frame covered with textured / metallic/white front

plate modules erected on / in wall / ceiling as per pipe

erected. with necessary batten/angle holder or ceiling rose

or H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete, Cat. III

but for 2 nos of 2.5 sq.mm FRLS PVC insulated copper

conductor wires with 1 no 1.5 sq.mm FRLS PVC insulated

conductor wire (Green color for earthing) for 16 A AC

starter with universal socket up to satisfaction of E.I.C.

(Excluding Main Line, including 16A AC starter & Socket)

Providing following type of Modular Type Accessories

mounted with PVC / metallic/Wooden box, single

mounting base frame covered with textured / metallic/white

front plate , modules erected with necessary connections as

per site situation directed by Engineer In charge.

(3) Two Pin/RJ-11 Telephone Socket 0 -

[A] For One Gang, Cat. III 0 Ea. 153.52 -

[B] For Two Gang, Cat. III 0 Ea. 200.99 -

(4) TV Co-axial Socket outlet, Cat. III 0 Ea. 153.52 -

(7) Blank Plate Single, Cat. III 0 Ea. 24.24 -

(8) Computer RJ-45 socket, Cat. III 0 Ea. 153.52 -

(22) 16/20/25 Amp. Modular Starter for Motor / A.C. Unit

Complete, Cat. III

(19) Modular Indicating Call Bell, Cat.III 0 Ea. 314.11 -

(20) Modular Buzzer, Cat.III 0 Ea. 143.42 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings &

12 Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed.

Providing & erecting PVC Corrugated Flexible Conduit

with required nos. of coupling, PVC bushes, Check-nuts

13 etc. complete of following sizes.

Supplying & erecting UPVC Mini trunking (PVC Casing-n-

Capping) having double-locking arrangement with grooves,

trunking of size not below 12.5 mm in height as per IS with

accessories of PVC/Resin polypropylene not below 1.8 mm

thick duly sealed in joint & erected on wall / ceiling of following

Providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected concealed in

/flushed on wall/ceiling, with 1.5 sq. mm copper conductor

15 FRLS PVC insulated stranded wire of green colour for

earth continuity of following size

(A) With medium class Rigid PVC pipe and accessories

(a) 2 wire 1.5 sq. mm 64 Mtr. 59.59

(b) 2 wire 2.5 sq. mm 52 Mtr. 78.78

providing and erecting Mains with 1.1 KV grade FRLS

PVC insulated ISI marked stranded Copper conductor wire

in following type of pipe to be erected in / on wall / ceiling

with 2.5 sq. mm copper conductor FRLS PVC insulated

16 stranded wire of green colour for earth continuity of

(A) with medium class Rigid PVC pipe and accessories

(a) 2 wire 4 sq. mm 23 Mtr. 107.06

(d) 3 wire 4 sq. mm 0 Mtr. 159.58 -

Providing & Erecting approved make following size of TV

Co-axial flexible cable comprising inner conductor of solid

bare copper insulated with Foam PE & Secondary

17 conductor made of poly - Aluminium film bonded Al.

Braids @ suitable coverage overall sheathed with black

PVC insulation.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Supplying & erecting approved make Telephone Cable

electrolytic copper conductor PE insulation twisted in two

pairs, & wrapped with FRLS PVC tape & sheathed with

FRLS PVC or HFFR outer Jacket suitable for telephone

wiring & confirming to C-DOT erected in existing pipe. of

following size of conductors & nos.of pairs. With necessary

[A] Conductor Size 0.5 mm

(2) Two Pairs 0 Mtr. 19.19 -

(b) Armoured [Jelly Filled]

(1) Ten Pairs 0 Mtr. 120.19 -

(2) Twenty Pairs 0 Mtr. 190.89 -

(3) Fifty Pairs Mtr. 446.42 -

Providing & erecting main Distribution (MDF) indoor

type, back mounted frame as per DoT standard approved

with krone strips

(a) Suitable for 10 pair 0 Ea. 949.40 -

(b) Suitable for 20 pair 0 Ea. 1311.99 -

(c) Suitable for 50 pair Ea. 1678.62 -

Supplying & erecting M.S. Box having 16 Gauge painted

with red oxide or Heavy duty PVC box erected flushed on

wall or concealed in wall with necessary plastering &

finishing as directed of following size.

Providing & erecting Switch board for Computer or

electric apparatus consisting of following items in single

board erected on PVC / Metal/Wooden board

concealed/open with 3 mm thick PC (Polycarbonate) /

21 Acrylic sheet erected as directed

1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch

3 nos. 6A 5 pin Plug

For Modular Type Accessories, Cat. III 0 Ea. 1081.71 -

Decorative call bell Ting-tong box type 250 volts

complete erected

L.T. SWITCHGEAR AND DIST. BOARD & L.T. PANEL

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

MICRO. BASED LSGD RELEASE MCB , 4 POLE, 25 KA

R Y B INDICATOR

ON OFF INDICATIOR

CHANGE OVER SWITCH 4 Pole 25 KA of IRON CLAD/

METAL CLAD WITH OPERATING MECHANISM

63 AMP., 4 POLE MCB-B CURVE, 10 KA, WITH ON OFF

23 INDICATOR : 6 Nos. 0 Ea. 152762.50 -

63 AMP., 4 POLE MCB-C CURVE, 10 KA, WITH ON OFF

INDICATOR : 1 Nos.

40 AMP., 4 POLE MCB-B CURVE, 10 KA, WITH ON OFF

INDICATOR : 1 Nos.

32 AMP., 4 POLE MCB-C CURVE, 10 KA, FOR WATER

PUMP WITH ON OFF INDICATOR : 1 No.

40 AMP., 4 POLE MCB-B/C CURVE, 10 KA, WITH ON OFF

INDICATOR : 2 Nos.

32 AMP., 4 POLE MCB-B/C CURVE, 10 KA, FOR WATER

PUMP WITH ON OFF INDICATOR : 2 No.

Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

busbar, neutral link, earth bar and DIN rail, Conforms to IS

8623-1 & 3, IEC 61439-1 & 3 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase

24 (b) sheet steel double door (IP-43)

(ii)6 way 1 Ea. 582.77

(iii)8 way 1 Ea. 1152.41

(B) three phase incoming and single phase horizontal type

outgoing Per phase isolation type (PPI)

(b) sheet steel double door

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of

KA. at 415 V,having normal current rating up to 25 A to

25 100A. with Fixed thermal & magnetic release suitable to Ea. 6790.43 -

work on A.C. supply 50 c/s. with all internal connections,

spreader tinned copper & complete erected in existing

G.M.S. housing.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

RCCBs, 30 mA, 10 KA, 40 Amp., FP, Cat. III

27 MCB, 10 KA, 40 Amp., FP, Cat. III (INCOMER) 0 Ea. 638.32 -

RCCBs, 30 mA, 10 KA, 25 Amp., DP, Cat. III

MCB single pole 6A to 25A, 10 KA Cat. III (10

Providing & erecting 240 V MCB double pole switch for

motor & inductive load (C Curve) having 10 KA

breaking capacity & confirms to IS : 8828 in existing box

having following capacity, Cat III, (A) 6 to 32 Amp.

Providing & erecting 240 V MCB double pole switch for

lighting Load (B Curve) having 10 KA breaking capacity

& confirms to IS : 8828 in existing box having following

capacity, Cat (III), 6 to 32 Amp.

Providing & erecting 415 V MCB Four Pole for Motor

& Inductive Load (C Curve) having 10KA breaking

capacity & confirms to IS :8828 in existing box having

following capacity, Cat III, 6 to 32 Amp.

Supplying & erecting approved make Electronics Starter

and relay for air conditioners in ABS plastic moulded

housing. Company fabricated with bakelite terminal for

connection with silver coating bimetallic contact in

switching device for o/p with following features.

33 (1) Low Voltage Protection below 130 V 2 Ea. 886.78

(2) High Voltage protection above 270 V

(3) Overload protection for 2-5, 4-10, 8-14, 10-16, 14-22

Amp. (inverse time chara-)

(4) Indicating LEDs for AC on LV, HV, O/L, T/D

(5) With unique feature of 3 minute of time delay

Plastic enclosure fitted with DIN rail suitable for

incorporating One / Two nos. MCB

Plastic enclosure fitted with DIN rail suitable for

incorporating Three /Four nos. MCB

Sheets steel powder coated enclosure suitable for

incorporating One/Two nos. MCB.

Providing and erecting metallic vitrified danger notice

board as per language suggested by engineer incharge for

MEDIUM VOLTAGE installation to be erected as per IS-

Providing & erecting Medium Voltage Danger Notice

38 Board sticker as per language suggested by engineer 0 Ea. 26.26 -

incharge of standard size as per IS-2551

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

providng and erecting Approved make single phase

electronic energy meter rating 5A/20A/40A based on

ASIC (Application Specific integral circuit) digital

technology with accuracy Class-I, temper proof, free from

39 effect of external magnetic field with phase, earth, reverse 0 Ea. 1738.21 -

and impulse indications, 6 digit electro-mechanical counter

suitable to work on 120 V to 300V, 45 - 55 Hz., housed in

robust enclosure complete to be erected as directed with

year replacement guarantee. Cat. III

providng and erecting Approved make energy meter

phase 4 wire unbalanced load rating, 10A to 60 Amp.

based on ASIC(Application specific Integral Circuits)

digital technology with accuracy Class - 1 , temper proof,

40 free from effect of external magnetic field with 3 phase 0 Ea 2696.70 -

indication, earth & impulse indication, 6 digit electro

mechanical impulse counter, suitable work on 120 V to

300V per phase 45-55 HZ, housed in robust enclosure with

erection as directed. Cat. III

INDOOR LIGHTING ITEM

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/ aluminium die

cast powder coated and high U.V. & corrosion resistance

with diffuser with company mark/name 160V to 270V,

Power Factor more than 0.9, THD < 15%,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

41 Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver

(i) 5-10 Watts, Surge-2 KV, IP-20, conventional 1 to

(iii) 18-20 Watts, Surge - 2KV,IP-20, conventional 4 feet 0 Ea. 295.93 -

(iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet 20 Ea. 373.7

(v) 36-40 Watts, Surge-2 KV, IP-20, conventional

Supplying and erecting LED lamps with following wattage

(A) LED Lamps integral type, with PC diffuser suitable

42 LAMP holder, Cat. III

(i) 2 to 3 watts 0 Ea. 69.69 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(ii) 5 to 8 watts 20 Ea. 112.11

Supplying and erecting LED indoor fittings with LEDs of

wattage 0.2 Watt to 0.5 Watt assembled on single MCPCB,

with housing used as a heat sink shall be made of thick

sheet Steel conforming to IS: 513/CRCA/aluminium

pressure die cast powder coated and high U.V. & corrosion

resistance with diffuser housed in aluminium casted body

with company mark/name

160V to 270V,Power Factor more than 0.9, THD < 15 %,

CCT 3000 K to 6500K,

Luminaire efficacy> 85 lumens/watt

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE:

Below description have shown ranges of Wattage capacity

of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips

(ii) 11-15 watts, Surge-2 KV, Cat. III 0 Ea. 427.23 -

(iii) 16-20 watts, Surge-2 KV, Cat. III 0 Ea. 589.84 -

(iv) 22-24 watts, Surge-2 KV, Cat. III 0 Ea. 758.51 -

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Ct. III Ea. 2348.25 -

(G) Step Light having Aluminium die cast and ABS

Plastic material.

43 (i) 5 watts, Direct/Indirect luminaire, Cat. III Ea. 747.4 -

Supplying and erecting LED street light / Flood light fittings

with High power White LEDs wattage of 3 Watt and above

assembled on single MCPCB, efficiency more than 130 lm/w

and corrosion free High pressure die cast aluminum housing with

smooth finish powder coated and heat sink extruded aluminium

with diffuser and Polycarbonate optics/ lenses, with toughened

glass with company mark/name engraved or embossed 160 to

270 V,Power Factor more than 0.95, THD < 10 %, CCT

K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required

LM-79 & LM-80 certificates)(NOTE: Below description have

shown ranges of Wattage capacity of LED fittings.The Engineer

incharge may select any wattage capacity between the ranges

(A) Street Light (IP-65), Surge protection -4KV integral

and ,Light must have 440VAC line supply with over-

voltage protection.

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(iv) above 90 to 120 watts, Cat. III

(Wall mounting outside)

Outdoor street light fitting side entry with clear acrylic

/plastic / polystyrene cover complete with starter, polyester

choke copper wound complete erected with 40/36 watt tube

holders. with lead wire and connections. (For Second Floor

(a) With 1 tube 40 watt.120 cms, Cat. III Ea. 1111 -

(B) LED Panel Light with provision for Plane front frame

with translucent cover fixed to housing complete.IP20

(vi) 36 watts, 24" x 24", Surge- 2KV, Cat. III 0 Ea. 1794.77 -

Supplying and Erecting Of L.E.D. type High bay fixture

having Power Consumption of following watts with, Input

Voltage 110 - 290 V.AC with full efficiency, Power Factor

> 0.9 with 50/60 HZ, CCVC LED Driver used for

maximum power saving, Best Quality luminium alloy

housing and aluminium Dome for etter heat dissipation,

CCT Cool white (6000K), CRI 80, Beam angle >

dgrees, working temperature -20 degc to +55 degc, Body IP

OUTDOOR LIGHTING ITEM

Supplying and erecting B class Galvanized iron pipe having

smooth finished bore of the pipe on both ends erected nuts and

bolts along the pole / wall shaping the pipe as per site

requirement. Pipe dia as following.

(A) 25 mm dia 0 Mtr. 212.10 -

(B) 32 mm dia 0 Mtr. 252.50 -

Supplying & erecting approved make SMC press

moulded composite FRP. loop-in, loop-out approx. 2mm

thick box complete with Bakelite connector strip

5way(3P+N+E),DIN rail for mounting mob & hinged

46 doors as per requirement having locking arrangements with

mounting clamp with nuts, bolts & washers suitable for

erection on pole with cable clamps& earth bolt of following

(F) 200mm x 180mm x 100mm [deep] 0 Ea. 639.33 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand / Solid Copper conductor

for 1.1 KV. to be laid on wall with necessary clamps or in

47 existing trench / pipe at road crossing or floor of

following size of cables. (For wall mounted street light /

flood light luminaries)

(B) 4 core 4 Sq. mm 0 Mtr. 426.22 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables. (For wall mounted street light /

flood light luminaries)

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with high

pressure tool & connected to switchgear terminals with

brass/cadmium plated nut bolts in an approved manner. (For

wall mounted street light / flood light luminaries)

Supplying & erecting approved make IP 55 grade Company

fabricated Timer Panel of following capacity for switch On-

Off street lights on time scheduling basis made from 16G CRCA

sheet duly epoxy power painted inside and outside with hinged

doors and locking arrangement consisting of suitable size of

Pole MCB and 4 pole contactor (cat-III)with analog time switch,

auto manual switch of same make and suitable input and output

Bakelite terminals and with door earthing approved by Engineer

in charge.(For wall mounted street light / flood light luminaries)

FAN AND RELEATED ITEM

Supply, Installation, Testing and Commissioning of suitable

sweep, BEE 5 Star rated, Ceiling fan with Brush Less

Direct Current (BLDC) permanent ferrite magnet Motor,

class of insulation: B, Rust free 3 nos.Aluminium blades,

nos. canopies, shackle kit with earthing provision, copper

winding, Power factor not < 0.9, Service Value (CMM/W)

minimum 6.85, Air delivery minimum 215 CMM,

RPM,230v (tolerance as per IS : 374-2019), THD < 10%,

compitible with electronic regulator unit for Speed Control

and all remaining accessories including safety pin, nut

bolts, washers, temperature rise = 75 degree C (Max.),

suitable for 140 to 285 Voltage and rectifier circuit with

surge, over current and overload protection , 50 Hz, Single

phase AC Supply, earthing etc. Complete as required.[

Make shall be approved by Engineer in Charge]

(A) 1200 mm Sweep (48")

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark with

Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete

having 3blades with aluminium blades with , canopy &

cm. down rod erected with earthing.(Make shall be

approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium

Class M.S. Pipe down rod erected duly painted for fan

complete with proper insulation without leakage and

Supplying & erecting fan hook box of 10 mm M.S. round

bar bounded to the RCC bars up to 50mm length each side

55 and pierced through a 16 Gauge M.S. box / Heavy Duty 3 Ea. 108.07

PVC box complete erected concealed in Ceiling with

necessary finishing.

Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box.

Supplying & erecting single phase approved make

industrial exhaust fan suitable for medium duty ring

57 mounted low noise operation suitable for medium duty 8 Ea 2,054.34

having following dia size and maximum speed in RPM

[A] 305 mm dia 900 RPM, Cat. III

Providing suitable M.S. louver shutter of the Exhaust

Supplying & erecting electro galvanised G.I. wire micro

mesh jali cover of grade 304 required size with suitable

wooden frame duly fitted in wall outside of exhaust fan for

insect protection.

Providing & erecting fresh air fan 250 mm dia with

square frame make of ABS body with louvers, Cat. III

Supplying and erecting approved make oscillating type

medium duty bracket fan with Aluminium Blades A.C.

23OV. 50cy/s, with thermal overload protection wall

mounted with height adjustment and rotary tilting device

complete with guard, pull cord for speed and oscillation

flexible Core plug top complete erected with lead wires as

EARTHING SYSTEM

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and erecting required size HOT deep

Galvanised iron strip for earthing of H.T. , OCB/ ACB/

Transformer LT panel board, Motors etc. using proper

Providing and erecting Annealed bare Copper wire 8 to

Providing and erecting HOT deep Galvanised iron strip

wire 8 to 16 SWG.

Providing and erecting Pipe type earthing having

cms. long and 2.5 cms. dia. galvanised iron pipe with

coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

Providing and erecting Pipe type earthing with 40 mm

dia 2.5 mtr long 'B' grade G.I. pipe with necessary

coupling buch buried in specially prepared earth pit & G.I.

earth wire of 8 SWG erected & connected as directed

For using salt and charcoal / coke as required for pipe

Supplying & erecting in earthpit of minimum bore dia.

225mm size approved make Safe Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer

pipe dia of 80 mm having 80-200 Micron galvanising,

Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications with chamber and heavy

duty cover.(approved make OEM has to submit test

certificate including value of earth resistane of installation.

[B] For Electrical installation up to 11 KV located in other

than normal soil i.e. Soft Rock, Marshy Soil etc.

-Length of Pipe : 2 mtr 2 Ea. 7,095.25

-Back filling Compound :1 no. Bag of 25 Kg. two for body

earth and one for neutral earth

[C] For Electrical Installation covering Transformer

Neutrals, Lightning arrester Earthing, A.C.Plant &

Sensitive Computer System(like Automation,

SCADA)i.e. independent Earthing located in other than 0 Ea. 10,593.89 -

normal soil i.e. Soft Rock, Marshy Soil etc..

-Length of Pipe : 3 Mtrs.

-Back filling Compound :2 nos Bags of 25 Kg.

CABLES, WIRE AND TERMINATIONS

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Aluminium conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (From

DISCOM energy meter to Main L.T. panel)

(G) 3 1/2 core 150 Sq. mm ( 70 Sq. mm 1/2 core) 0 Mtr. 855.47 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

KV. to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 0 Mtr. 1,586.71 -

Making trench in soft soil of suitable width of 90 cm deep

for laying cable or locating the fault all over the run and

back filling the same and making the surface as normal

Providing & laying. R.C.C. Hume pipe for cable to be

laid 90 cm. below ground across the road crossing or on

floor with necessary material in an approved manner and

making the ground as per original. (F) 100 mm dia.

Providing & laying approved make Double walled

corrugated pipes (DWC) of polyethylene(conforming to

IS 14930 II )with necessary connecting accessories of same

material at required depth in existing trench for laying of

cable. below ground / road surface for enclosing cable,

(A)50 mm outer dia

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

74 laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 3 1/2 core 25 Sq. mm ( 10 Sq. mm 1/2 core) 0 Mtr. 1,345.32 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand / Solid Copper conductor for 1.1 KV.

to be laid on wall with necessary clamps or in existing

trench / pipe at road crossing or floor of following size of

(A) 4 core 2.5 Sq. mm 0 Mtr. 269.67 -

(B) 4 core 4 Sq. mm 0 Mtr. 362.59 -

(C) 4 core 6 Sq. mm 0 Mtr. 508.03 -

Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured

cable multistrand Copper conductor for 1.1 KV. to be

76 laid on wall with necessary clamps or in existing trench /

pipe at road crossing or floor of following size of cables.

(A) 4 core 10 Sq. mm 0 Mtr. 673.67 -

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and erecting XLPE(IS:7098)(I)-88 ISI

armoured cable multistrand Copper conductor for

1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of

following size of cables.

(B) 4 core 16 Sq. mm 0 Mtr. 984.75 -

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

78 for PVC insulated armoured cable complete with out going

tails, insulating tape etc for following size of cables.

Providing and, fixing heavy duty flange type brass

double compression type cable gland with rubber ring

79 for PVC insulated armoured cable complete with out going 0 Ea. 66.66 -

tails, insulating tape etc for following size of cables.

(A) 3 & 1/2 / 4 core 25 Sq. mm

Providing and, fixing heavy duty flange type brass cable

gland with rubber ring for PVC insulated armoured cable

complete with out going tails, insulating tape etc for

following size of cables.

(B) 2 to 4 core 6 Sq. mm 0 Ea. 38.38 -

(C) 2 to 4 core 10 Sq. mm 0 Ea. 43.43 -

(D) 2 to 4 core 16 Sq. mm 0 Ea. 54.54 -

(E) 2 to 4 core 25 Sq. mm 0 Ea. 59.59 -

Solder less crimping type Aluminium lugs conforming to

IS suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

81 with brass/cadmium plated nut bolts in an approved

Solder less crimping type Copper lugs conforming to IS

suitable for cable of following size evenly crimped with

high pressure tool & connected to switchgear terminals

with brass/cadmium plated nut bolts in an approved

Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction [C] CAT -

WATER COOLER AND PURIFIER

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an

ambient temp of 45˚ C. The outlet temp. of the water

should drop by 15˚ C within a hour, The water cooler

84 should be comprising of hermetically sealed compressor, 0 Ea. 41,342.33 -

fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel.

SITC of Water Purifire Eureka Forbs Make AG 200 or

Supplying & erecting bank of all polypropylene condenser

(APP type) with standard capacity of 2,3,5,7, 10,12.5 &

KVAR units of P.F. correction for operation on 3 phase

c/s, 400 /440V (+ / - 10%) with externally discharging

resistance, earthing terminal & built on angle iron of

channel iron frame work and provided with terminal cover

box. Complete erected on provided iron bracket or on floor

duly tested by license.

PUMP SETS AND STARTERS

Providing & erecting open well type horizontal mono

block pump set with stainless steel body having following

(D) 1 HP Three phase open well motor pump set suitable

for 190 LPM discharge @ 21 mtr. head, suitable for 32mm

dia. delivery pipe.

S.I.T.C. of single phase submersible pump set suitable for

100 mm size or more dia bore well having motor capacity

and discharge as under with necessary panel box. Lifting

88 and Lowering taken extra. 1 Ea. 15,595.41

(a) Motor rating 1 HP (12 stage) pump having capacity of

50 LPM at 43 to 45 mtr head suitable for 32 mm dia.

Supplying & erecting approved make self-priming

domestic monoblock water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply with

89 metallic flange, and M.S. impeller delivery and following 1 Ea. 7,679.03

(a) 40 LPM at 24 mtrs. head suitable for 25mm dia.

Delivery. Cat.III

Supplying and erecting push button operated fully

automatic Star-Delta starter with 3 Nos. of 15A.rating

contactors and directly operated thermal overload relay

having 10-21A range and erected in sheet steel enclosure

for 3 phase 415V. 50 c/s. A.C. motors from 7.5 to 15H.P.

complete erected on

(Without GST & With Cess)

Description Qty. Unit Rate Amount (Rs.)

(A) P.W. Block with necessary connection, Cat.III 0 Ea. 10,483.80 -

(B) Angle iron frame add to the above 0 Ea. 204.02 -

Supplying and erecting Direct On-line Electronics Starter

with 2-5/4-10/8-14/10-16 Amp. Rating relay (variable

current setting) directly operated in totally insulated elegant

enclosure and 18 Amp. Rating power relay with start - stop

button for single phase operation up to 3 HP as per

91 complete erected on P.W. Block with following features. 2 Ea. 1,603.88

Low voltage cut off below 140 V

High voltage cut off above 280 V

Overload protection

Indicating LEDs for motor on lv, hv & overload tripping.

Supplying and erecting Direct-on-line, Starter with

15A.rating contractor and with 4-14A. range, directly

92 operated thermal overload relay in sheet steel enclosure for 0 Ea. 2,046.26 -

3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete

erected on P.W. Block with necessary connection. Cat.III

Supplying & erecting approved make Automatic liquid

level controller 6A. with sensor testing as per instruction

93 of Engineer in charge on site complete with wiring 1 Ea. 2,355.32

connection with existing wires , with copper conductor

from pump to upper and lower tank.

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single

pole MCB with 20 Amp. Plug socket, company fabricated

powder coated sheet steel enclosure erected as directed

with connection.

[A] Metal Clad Socket with metal clad top. Cat.III 0 Ea. 527.22 -

[B] 15 Amp. / 5 Amp. Five pin Universal Socket Cat.III 0 Ea. 660.54 -

Executive Engineer

South Zone - A (Udhna)

Sign of Contractor Surat Municipal Corporation