GE AF/AMB-T-64/2022-23 PROVN OF TOILETS, INTERLOCKING TILES, WATER TANKS, SHEET ROOFING AND CERTAIN E/M WORKS AT DIFFERENT LOCATIONS AT AF STN AMBALA UNDER GE (AF) AMBALA

Amount

Surface excavation not exceeding 30cm deep & averaging 15cm deep in soft/losse soil including removal of vegetation, bushes, shurbs & trees(not exceeding 30cm in girth) complete all as specified & directed.

Excavation in trenches, n exc 1.5mtr wide and n exc 1.5mtr in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. not exceeding 10 sqm on plan and n exc 1.5 m in depth and getting out in any type of soil, complete all as specified & directed.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for reinforced cement concrete (RCC)1:2:4 Type B1 (using 20mm graded mechanically crushed stone aggregates) as in foundations, includingrafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs not exceeding 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exceeding 10cm but not exceeding 20cm wide for rough finished surfaces of concrete complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregates) as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L RCC 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregates) as in columns, pillars, piers,posts and struts complete all as specified and directed

M&L RCC 1:2:4 type B1 (using 20mm graded mechanically crushed stone aggregates) as in beams, cantilevers,bressummers, lintels over 1.5mtr span complete all as specified and directed.

M&L for formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions for rough finished flat surfaces of concrete complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for fair finished flat surfaces of concrete complete all as specified and directed.

M&L mild steel TMT bars 10mm dia and over, Fe500/Fe500D grade confirming to IS-1786, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in main reinforcement complete all as specified and directed.

M&L mild steel TMT bars 6mm to 8mm dia, Fe500/Fe500D grade conforming to IS-1786, cut to length cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as in stirrups, spacer & binders complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft/loose soil complete all as specified and directed

Removal of soil to a distance not exceeding 50m and depositing where directed complete all as specified and directed.

M & L for laying broken stone or boulders hardcore of guage exc 63 mm but not exc 100 mm deposited spread and levelled in layers not exc 15 cm thick watered rolled/rammed to a true surface complete all as specified and directed

M & L for 100 mm thick plain cement concrete 1:4:8 type D 2 (using 40 mm graded aggregate ) as in sub base, finished even and rough to receive the topping layer for hard standing complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 (40mm thick) using 20mm graded aggregate as in leveling course, complete all as specified & directed.

M&L for 15mm thick screed bed or bedding layer in CM 1:4 for laying floor finishes. complete all as specified and directed by Engineer-in-Charge.

M&L Non skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06sqm but not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white of coloured cement to match, complete all as specified & directed.

M&L for plain cement concrete 1:3:6, type C2 (using 40mm graded aggregates) 75mm thick as in plinth protection, complete all as specified & directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6m mean radius built in cement mortor 1:4. complete all as specified and directed by the Engr-in-Charge.

M&L for brick work with fly ash bricks straight or curved on plan to any radius built in half brick thick walls built in cement mortor 1:4. complete all as specified and directed by the Engr-in-Charge

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, finished even and smooth without using extra cement, complete all as specified & directed.

M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 as backing coat to receive wall tiles etc, complete all as specified & directed.

M&L coloured glazed ceramic tiles 300 x450x 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles complete all as specified and directed .

S&F Chequered cement concrete commercial Tiles 25cm x 25cm x 20 to 22mm /30cmx30cmx20 to 25mm thick, jointed and pointed in neat cement slurry in floors laid over and 15mm screed bed in CM 1:6 including complete all as specified and as directed.

M&L for plain cement concrete 1:2:4 type B1 (using 20mm graded stone aggregates) as in coping/ bed plate/ bed block including necessary forms and moulds, complete all as specified & directed.

M&L for preparation of newly plastered or unplastered surfaces and applying three coats of white wash on wall, complete all as specified & directed.

S&F Pillar tap 15mm dia, cast copper alloy, with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shank and fly nuts, screwed for iron pipe and fixed, complete all as specified & directed.

S&F stop valves 15mm dia cast copper alloy, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified & directed.

S&F 32mm bore High density polyethylene pipes (HDPE) of pressure rating 6kgf/sqcm laid in trenches, complete all as specified & directed.

S&F 75mm PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or floors, complete all as specified & directed.

supply and fixing new 15mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors or in trenches , complete all as specified and as directed

Supply and fixing new 20mm bore Galvanized Iron tubing, medium grade, with all fittings, such as Tee, elbows, sockets, unions, short pieces and application of bituminous paint in concealed portion, fixed to wall/ ceiling or laid on floors, complete all as specified and as directed.

M&L for cast iron floor trap 75mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4), complete all as specified & directed.

Supply and fix, UPVC (SWR) pipes 110 mm dia single socketed in any length with solvent cement joints laid under floor or on walls fixed as soil / waste / vent pipes with Stack clamps made out of 50 mm by 5 mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall complete all as specified and as directed.

S&F PVC (SWR) bends any radius, 110mm bore with access door, complete all as specified and directed.

Supply and fix PVC connection 15mm dia, 450mm long including check nut complete, all as specified and directed.

M&L for pre- polished granite slab machine cut of any shade as approved by GE of 15 to 20 mm thick including necessary notching, chamfering the edges over 15mm thickness of screed bed in cement Mortar 1:4 including cutting, Mirror polishing (Granite finish) with suitable grinding stones complete all as specified and as directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms, and other similar situations complete all as specified and directed.

S&F vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) but including sheet cover and complete all as specified and directed.

S&F vitreous china water closet (squatt pan) orrisa pattern 580x440 mm size pan white with front or back inlet with integral 'foot rests including provn of lime concrete bedding including connections to 'flushing cistern/pipe complete all as specified and directed.

S&F in repair Viterous china wash basin, white, flat back, size 630x450mm counter sunk oval type fixed in granite excluding taps, waste,chain and plug and porcelain stopper complete all as specified and directed.

Vitreous China urinals, half stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified & directed.

Supply and fixing vitreous china urinal partition ,white of size 310 x 700mm etc complete all as specified and directed.

Supply only PVC valve less syphonic action type flushing cistern 10ltr capacity low level, white/coloured with inlet ball valve float and handle including bracket and fixing of PVC flush pipe 32 mm dia and PVC connection pipes complete all as specified and directed.

Supply only flush pipe of polythene of low or high density 32 mm PVC for low level flushing cistern complete all as specified.

Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed.

S&F chromium plated square shape towel ring fixed with chromium plated brass screws in approved pattern complete all as specified and directed.

S&F stainless steel chromium plated toilet paper holder of approved pattern, shape and size, complete all as specified & directed.

S&F fancy type chromium plated brass soap dish suitable for double soap fixed of approved pattern, shape and size complete all as specified & directed.

S&F factory made solid PVC moulded door shutter (with wood free EPS), 28 to 30 mm thick (Stiles) with 2, 4, 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face & fixing in frame at site as per drawing shown on SSR complete all as specified and directed.

S&F Solid PVC Door Frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening complete all as specified and as directed.

S&F steel ventilator with top hung shutter including hinges peg stay to receive glazing or gauzing and one coat of primer including fixing of hold fast size 25 x 5 mm of flat iron etc complete all as specified and directed.

S&F butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21, 75 mm long complete all as specified and directed

S&F 125mm Extruded Aluminium handles fabricated type anodised etc complete all as specified and directed.

S&F 150mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 100mm long aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed

S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed.

S&F 3mm thick sheet glass figured glass n exc 0.50sqm each pane and fixed with oil putty or with wooden beading in square etc complete all as specified and directed.

Preparation of new steel surfaces of any description over 10cm width or girth & applying two coats synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F of 500 Litre capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top) of specifications as per MES Schedule 2009, Part – I and hoisted, fixed in position complete all as specified and directed.

S&F Gun metal Gate valves 20mm dia with iron wheel head, screwed both ends for iron pipe and fixed including including cutting / threading old pipes and provision of new fittings such as Tee, socket, elbow, union etc as required, complete all as specified and directed

S&F 20mm bore ball valves, high pressure, PTMT, with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed.

M&L concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested in cement concrete 1:3:6 for 150mm dia pipe complete all as specified and directed.

M&L for brick work with sub class B bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for brick work with sub class B bricks, in one brick thick honey comb walling built in cement mortar 1:6 complete all as specified and directed.

M&L for 150mm dia salt glazed stoneware drain pipes laid in trenches and jointed complete all as specified and directed.

M&L for 75mm PVC (SWR) pipes single sockted in any length with rubber ring joints fixed to walls complete all as specified and directed.

S&F for 75mm dia PVC (SWR) vent cowl complete all as specified and directed.

M&L for RCC 1:2:4, type A1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and colmns in floors roofs, landings, balconies etc complete all as specified and directed.

M&L for pre cast PCC 1:2:4 type B1 (using 20mm graded aggregate) as in landings, cover slab for manholes, chajjas and similar articles complete all as specified and directed

M&L for sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.

M&L for, rubber moulded pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigments, complete all as specified and directed.

M&L for providing cement concrete in roof ,Kerbs, mud stops ,interlocking tile rounded or chamfered on edges 1: 2:4 type B1 (using 20 mm graded aggregate) etc complete all as specified and directed

Removing excavated material (soils) exc. 250m but not exc. 500m and depositing where directed at a level not exc. 1.5m above starting point complete all as specified and directed

M&L for preparing newly plastered surface of walls and applying two coats of exterior acrylic paint (water based) over a coat of primer in camoflaging pattern of any shade and pattern complete all as specified and directed

M&L for 100mm thick plain cement concrete 1:2:4, type B-2, (using 40mm graded stone aggregates) in floors and pavings etc, complete all as specified and directed.

S&F Roof trusses (framed), purlins, crane gantries, rails and fatenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified and directed.

M&L for painting to steel surfaces of any description not other wise described over 10cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new surfaces complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws all as specified and directed

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, cutting not exceeding 10cm girth, complete all as specified and directed.

M&L for applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489: 2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43litre/ surfaces, complete all as specified and directed.

Suppy and fixing of mild steel screw bolts (machine made) with haxagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one haxagonal or square nut not exceeding 10cm long and 16mm dia of shank complete all as specified and directed

Suppy and fixing of mild steel screw bolts (machine made) with haxagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one haxagonal or square nut not exceeding 30cm long and 20mm dia of shank complete all as specified and directed

E/M PORTION

M & L for concealed point wiring complete with 1.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade drawn through and including non metallic rigid PVC conduit,medium grade minimum 19mm dia ISI marked and conduit accessories fixed concealed in wall/ceiling/roof etc with sunken type pressed steel/welded MS terminal boxes made out of 1.6 mm MS sheet, 3mm thick laminated top cover for mounting of fittings,switches,sockets outlets,regulators etc complete including provisioning of 1.5 sqmm FRLS PVC insulated unsheathed cable 1100 volt grade with multi stranded copper conductor to common earth and connected to earth dolly for the following :-

One light point controlled by one switch 6 amp one way, complete all as specified and directed.

One fan/exhaust point controlled by one switch 6 amp one way, complete all as specified and directed.

M&L switch piano flush type single pole, one way 6amp, complete all as specified and directed.

S&F ceiling rose 65x50mm three terminals 230 volt, complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20 W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

Supply & fix exhaust fans AC single phase 230/ 240 V of size 300 mm sweep (Steel body) with Blades, frame and louvers including making of hole of suitable size along all fixing accessories, complete all as specified and directed.

Supply and fixing sheet metal enclosures for MCB distribution board 230 Volts single pole and neutral 8 way double door type flushed inside the wall with 200 Amp rated bus bar incl making the surface good complete all as specified and directed.

S&F MCBs 20 Amp SPN C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB, complete all as specified and directed.

S&F MCBs 6 to 32 amp SP C curve 240 Volts 10 KA finger proof terminal, bi-connect termination, label holder, 35 mm² terminal capacity, insulated sliding shutter, large two position dolly, ISI marked to be fixed on DB, complete all as specified and directed.

M&L earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level,the earth electrode surrounded by adequate quantity of charcoal dust and salt to a packed thickness of 15cm on all side and including connected to and including galvanized earth lead wire 4.0 mm dia upto 7.5 mtrs long by means of nuts and bolts, check nuts and washers of GI and connected to earhing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I and testing on completion including necessary excavation and earth work in any type of soil,PCC(1:3:6) type C1 chamber,pre-cast RCC slab 50mm thick in cement concrete (1:2:4),type B1,reinforced with welded steel wire fabric or XPM,(weight not less than 4 Kg per Sqm) with cast iron frame,funnel with watering pipe 20mm dia medium grade,wire mesh and lugs,GI protection pipe,15mm dia,light grade,7.5 mtr long for protection of earth lead upto test point etc all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sqmm 2 core, complete all as specified and directed.

M&L sand cushioning laid 15 cm below and 8 cm above the U/G cable and punned to 18cm which shall be measured for payment complete all as specified.

M&L for brick protection cover of UG cable by old size bricks common burnt clay building bricks sub class `B’ laid dry and flat abutting each other with width equal to length of brick and gap between adjacent brick not exceeding 10mm complete all as specified and directed

Supply and laying GI. Pipe, medium grade of dia 20mm including fittings, laid in trenches complete all as specified and directed.

Cutting existing steel tubing for alterations or additions 20 mm dia, complete all as specified and directed.

M&L for perforated stainless steel (heavy duty) cable Tray of size 30cm width and 10cm height of thickness 2.50mm including necessary fixing arrangement with wall/ Ceiling complete all as specified and directed.

M&L for perforated stainless steel (heavy duty) cable Tray of size 60cm width and 10cm height of thickness 2.50mm including necessary fixing arrangement with wall/ Ceiling complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregates) as in blocks to hold GI extension pipe for Air termination rod including necessary use and waste of form work required complete all as specified and directed.

M&L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint complete all as specified and directed.

Supplying, hoisting, fixing and connecting up rotational moulded PVC water stroage tanks of capacity 5000 ltrs (cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part-I including float valve of dia 20mm dia and connecting the overflow drain out, inlet and outlet pipes, tank nipple, elbow, bend, unions, sockets, etc complete all as specified and directed

Supply and fixing gun metal, globe or gate valves with iron wheel head screwed both ends, for iron pipe 25mm bore complete all as specified and directed

S&F 25mm bore GI tubing medium grade fixed to wall ceiling including necessary fittings viz elbow, union, nipple, tees, bends short & diminishing pieces, connectors, back-nuts, caps, sockets, plugs, fixtures, clamps etc complete all as specified and directed

Excavation over areas not exceeding 1.5mtr deep and getting out in soft/loose soil, complete all as specified and directed.

All as per serial item No. 115.00 here-in-before but depth exceeding 1.5mtr and not exceeding 3.0mtr deep, complete all as specified and directed.

KULWANT SINGH