Construction of 8 No. Type-II Quarters 24 No. Type-III Quarters and 08 No. Type-IV Quarters at Civil Hospital Sundernagar, Distt. Mandi (HP)

Amount

Excavation in foundations, trenches etc.in earth work in all kinds of soil such as pick work, jumper work, blasting work, saturated soil , including chieslling or any other mixed variety of soil, dewatering and or removal of slush and other incidentals, lift up to any heights, stacking the excavated soil upto any leads clear from the edge of excavation and then returining the stacked soil in 15 cm ( fifteen centemetre) layer when required in to plinth sides of foundation etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as per direction of Enginer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Excavation in drain and channel etc . in earth work in all kinds of classification of soil , viz pick jumper , blasting work , hard blasting work including chiseling / wedging out site of rock including dressing of sides, beds and disposing of excavated earth up to any distance and lift and disposed earth to be levelled and neatly dressed as per direction of Engineer- in – charge including carriage of materials with in all leads,lifts, and other incidentals .

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per direction of Engineer-in-charge including carriage of materials with in all leads, lifts and other incidentals.

Providing form work with steel plates 3.15mm ( three point one five millimeter) thick welded with angle iron in frame 30x30x5mm (thirty X thirty X five millimeter) so as to give a fair finish including centering, shuttering, strutting and propping etc. with wooden battens and balies in any height / depth of propping and centring below supporting floor to ceiling and removal of the same for in situ reinforced concrete and plain concrete work including carriage of materials with in all leads ,lifts and other incidentals

Foundation footing and basis of columns etc. and mass concrete including plinth beams and columns upto plinth level including carriage of materials with in all leads, lifts and other incidentals.

Flat surfaces such as soffits of suspended floors, roofs, landing and the like floors etc. upto all thickness in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Columns, Pillar posts and struts, square, rectangular or polygonal in plan in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Beams, cantilevers, girders and lintels, side and sofits of beams, beam haunchings cantilevers, bressumers and lintels upto any depth / length depth in all height in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Stair cases with slopping or stepped soffits excluding landing in all floor including carriage of materials with in all leads, lifts and other incidentals.

Edges of slabs and breaks in floors and walls upto any width in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying reinforced cement concrete design mix M-25 ( twenty five ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code .

Foundation, footings, bases of columns and the like and mass concrete including carriage of materials with in all leads, lifts and other incidentals.

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Column ,Pillars. Post and struts etc . in all floor level including carriage of materials with in all leads, lifts and other incidentals.

Stair cases (except spiral stair case) excluding landing but including preparing of the surface and finishing of nosing up to all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying reinforced cement concrete design mix M-20 ( twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code in moulding as in cornices windows sills etc. upto any girth upto floor all floor level including carriage of materials with in all leads, lifts and other incidentals. .

Providing and laying reinforced cement concrete design mix M-20 ( twenty ) grade mechanically mixed and vibrated and curing complete excluding cost of form work and reinforecement for reinfoced cement concrete work . The mix shall be designed as per requirement of I.S code and PWD specification . The design mix will be got approved from the Engineer - in - charge prior to the casting . The theoritical consumption of cement for the item shall be worked out as per approved design mix as per I.S code upto floor all floor level including carriage of materials with in all leads, lifts and other incidentals. .

Walls (any thickness but not less than 0.10 ( point ten) metre thickness) including attached pilasters buttersses,plinth and string courses etc. from top of foundation up to all floor level including carriage of materials with in all leads, lifts and other incidentals.

Suspended floor roofs, landing and shelves and their supports balconies beams, girders , bressumers and cantilevers upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying cement concrete 1:4:8 (one cement: four sand: eight graded crushed stone aggregates) 40mm (forty millimetre) nominal size) mechnically mixed and curing complete excluding cost of form work in: Foundation and plinth including carriage of materials with in all leads, lifts and other incidental complete in all respect as per direction and Satisfaction of Engineer-in-charge .

Applying a coat of hot bitumen (mexphalt 80/100 or equivalent) using 1.70 kg. ( one point seventy kilograme ) Per square metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil. including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing Tor steel reinforcement for R.C.C. work including bending, binding and placing in position including cost of binding wire complete upto all floor level including carriage of materials with in all leads, lifts and other incidentals.

Second class brick masonry in common burnt clay building bricks in suPer structure up to all level in cement mortar 1:6 (one cement : six sand) and curing compelete including carriage of material within all leads, lifts Above Plinth Level up to all floor level.and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Second class half brick masonry in common burnt clay building bricks in suPer structure above plinth level up to all level in cement mortar 1:4 (one cement : four sand) and curing complete including carriage of material within all leads, lifts Above plinth level up to all floor level and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Stone Soling proPerly hand packed filling interstices with spalls and consolidating inculding spreading water complete including carriage of material within all leads, lifts and others incidental in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing wood work in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position second class deodar wood including carriage of material within all leads, lifts and other incidentals .

Providing and fixing 2nd class deodar wood 40mm( forty millimetre ) thick panelled glazed or panelled and glazed shutters for doors windows andclerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 2nd class deodar wood 35mm( thirty five millimetre ) thick panelled glazed or panelled and glazed shutters for doors windows andclerestory windows. Including black enamelled iron butt hinges with necessary screws including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 40 mm (forty millimetre) thick 2nd class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G. with wire of dia 0.56 mm( zero point fifty six millimetre ) for doors windows and clerestorey windows including bright finished black enamelled iron hinges with necessary screws. 30 mm (thirty millimetre) thick 2nd class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm ( nineteen millimetre ) thick Commercial Board water proof shulter for cup boards with butt joints & fixing with nails & screws etc complete) including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 19mm( nineteen millimetre ) thick water proof commercial board in shelves/box for cup board with butt joints & fixing with nails & screws etc complete). including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 1.00mm (one millimetre ) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etc complete. including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing square edges cover fillets (beading) 19mmx6mm ( nineteen x six millimetre ) section including mitring at junctions with wood screws and nails complete.1st class deodar wood including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing Commercial ply wood ceiling of approved quality with butt jointing and nails (frame work and cover fillets to be paid for separatly) including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing 100 mm ( one hundred millimetre ) bright finished brass handles with screws etc.complete including carriage of material within all leads, lifts and others incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Providing and fixing bright finished brass ball catcher 10 mm( ten millitre dia including carriage of material within all leads, lifts and other incidentals .

Providing and fixing M.S. grills of required patterns in wooden frames of windows etc. with M.S. Flats, square or round bars with round headed bolts and nuts or by screws. Plain grill. including carriage of material within all leads, lifts and other incidentals .

Providing and fixing oxidized M.S. sliding door bolts with nuts and screws etc. complete. 250x16 (two hundred fifty x sixteen millimetre) including all leads , lifts and carriage of material and other incidentals.

Providing and fixing anodized aluminium sliding door bolt anodized colour and shade with bolts and nuts screws etc. complete 250x16 (two hundred fifty x sixteen millimetre) including all leads , lifts and carriage of material and other incidentals.

Providing and fixing aluminum tower bolts (barrel type) anodized, transparent or dyed to required shade and colour with screws etc. complete.including carriage of material and other incidentials in all leads , lifts and as per the direction of the Engineer-in Charge

200x 10mm(two hundered x ten millimetre ).

150x10mm ( one hundred fifty x ten millimetre )

Providing and fixing 125mm ( one hundred twenty five millimetre ) aluminium handles anodized transparent or dyed to required colour & shade with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150 mm ( one hundred fifty millimetre ) oxidized M.S. single acting spring hinges with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing oxidized M.S. haps and stapple for cup board 90mm ( ninety millimetre ) size with necessary screws etc. complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 150 mm( one hundred fifty millimetre ) oxidized M.S. hooks and eyes including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 40x3mm( forty x three milliimetre ) flat iron holdfast 40 cm ( forty centimetre ) .long including fixing the frame with 10mm( ten millimetre ) dia bolts and nuts and wooden plug and embeded in cement concrete block 30x10x15 cm ( thirty x ten x fifteen centimetre ) 1:3:6.( one cement : three sand : six aggregate graded crushed stone 20mm ( twenty millimetre ) nomonal size including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S. curtain rod powder coated 25mm( twenty millimetr e) dia including clamps,finells with brackets plug etc.including carriage of materials with in all leads, lifts and other incidentals.

Precast terrazzo tiles hydraulic compressed 20 mm ( twenty millimetre) thick with marble chips of specified sizes laid in floors, treads of steps and landings on a bed of 25 mm (Twenty five millimetre ) average thickness of cement mortar 1:6 (one cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) incliding rubbing and polishing complete with tiles of following shades white including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 10mm ( ten millimetre )thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm (six hundred six hundred x ten millimetre ) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm ( twelve millimetre ) thick cement mortar 1:3 (one cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying spartic ceremic tiles 5.5mm. ( five point five millimetre ) thick in flooring 300 x300mm. ( three hundred x three hundred millimetre ) size treads of steps laid on a bed of 12mm ( twelve millimetre ) thick cement mortar 1:3(one cement: three sand) finished with flush pointing in white cement including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing white glazed tiles 6 mm ( six millimetre ) thick in skirting risers of steps and dado 12 mm( twelve millimetre ) thick cement mortar 1:3 (one cement :three sand) and jointed with cement slurry including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying marble work (Table rubbed and polished) in flooring 20mm ( twenty millimetre ) thick base in cement mortar 1:3(one cement : three sand) including jointing with cement mortar 1:2 (one white cement: two marble dust) with an admixure of pigment to match the shade of the marble. 20 mm ( twenty millimetre ) thick White makrana marble including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying heavy duty precast cement concrete inter locking paver blocks vibro compacted upto M- 50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm ( twenty five millimetre ) thick average thickness of cement mortar 1:4 (one cement : four sand) laid over and jointed with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for 60mm( sixty millimetre ) thick inter locking blocks including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing 0.60 mm(Zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coting of 20( twenty ) microns over 5 ( five ) microns primer coating + back coat of polister of 5( five ) microns over 5 ( five ) microns primer coating including fixing with screws pre painted iron J or L hocks, boalts and nuts 6mm dia and prepainted GI limpet and bitumen washer complete with all accessories as required as per the direction of Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals .

Providing and fixing ridges or hips 60cm(sixty centimetre) overall with 0.60 mm (Zero point sixty milimetre) thick prepainted steel sheets in roofing with hot dipped metalic zinc coated sheets with top coat of regular modified polyster organic coting of 20 ( twenty ) microns over 5 (five) microns primer coating + back coat of polister of 59 five) microns over 5(five) microns primer coating including fixing with screws prepainted iron J or L hocks, boalts and nuts 6mm( six millimetre ) dia and prepainted G.I. limpet and bitumen washer complete with all accessories as required including carriage of material within all leads, lifts and other incidentals .

Providing and fixing valley 90 cm ( ninety centimetre ) overall with 0.60mm ( zero point sixty millimetre ) thick prepainted steel sheet in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster organic coating of back coat of polyster of 5( five ) microns over 5 ( five) microns primer coating including fixing with screws prepainted iron J or L hooks, bolts and nuts 6mm dia with prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-charge. including carriage of material within all leads, lifts and other incidentals .

Providing and fixing 15 cm. ( fifteen centimetre ) wide 45 cm.( forty five centimetre ) overall semicircular plain G.I. sheetgutter with iron brackets 40x3mm ( forty x three millimetre ) size bolts and nuts and washers etc. including making necessary conections with rain water pipe complete as per design. 0.63mm ( zero point sixty three millimetre ) thick sheet including carriage of materials with in all leads, lifts and other incidentals.

Providing flushing 38cm. ( thirty eight centimetre ) overall in plain G.I. sheet fixed with galvanised iron. J or L hooks, bolts and nuts, G.I. limpet washer and bitumen washers complete bent to shape and fixed in walls withcement mortar 1:3 (one cement : three sand) 0.63mm( zero point sixty three millimetre ) thick sheet including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing M.S B.P sheet 1.66mm to 2mm ( one point sixty six to two millimetre ) thick in eaves board/facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the direction of Engineer in Charges. (Base member of steel work shall be measured and paid seperately)including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing on wall faces PVC (D-Plast) rain water pipes of working presure not less then 4.5kg ( four point five kilograme ) per square metre including filling the joints with approved adhesive complete PVC 100mm dia ( one hundred millimetre ) including carriage of materials with in all leads, lifts and other incidentals. .

Providing and fixing PVC plain bend 100mm ( one hundred fifty millimetre ) on wall face PVC (D-plast) accessories for rain water pipe including filling the joint with approved adhesive complete including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 110mm ( one hundred ten millimetre ) size PVC clamps of approved design withsteel screws and rawl plugs etc. Complete in all respect including carriage of materials with in all leads, lifts and other incidentals.

Providing and laying 150mm ( one hundred fifty millimetre ) size PVC clamps of approved design withsteel screws and rawl plugs etc. Complete in all respect including carriage of materials with in all leads, lifts and other incidentals.

Steel work welded in built up sections, trusses and framed work, including cutting,hoisting, fixing in position and applying a priming coat of red lead paint . In beams, joists, channels angles, tees, flats with connecting plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafter and the like including carriage of materials with in all leads, lifts and other incidentals.

Painting two coats (excluding priming coat) on steel or metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter, sand papering and stopping with white enamel paint or other than white.including carriage of materials with in all leads, lifts and other incidentals.

Applying primer coat over new wood and wood based surfaces after and including praparing the surface by thoroughly cleaning oil ,gases drit and other foreign matter sand paPer ing and knotting with ready mixed paint brushing wood primer pink the rate is inclusive for carrriage of matrials and other incidentals.

Painting two coats (excluding priming coat) on steel or metal surfaces with enamel paint brushing to give an even shade including cleaning the surface of all dirt,dust and other foreign matter, sand papering and stopping with enamel paint other than white.including carriage of materials with in all leads, lifts and other incidentals.

6mm ( six millimetre ) Cement plaster to ceiling In Cement mortar 1:3 (one Cement: three Sand) including curing andcarriage of material within all leads, lifts and others incidentals .

15mm ( fifteen millimetres) cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor all floor level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement:six sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:6 ( one cement: six sand) including carriage of materials within all leads , lifts of material and other incidentals .

15mm (fifteen millimetres) cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth. Cement Mortar 1:3 ( one cement: three sand) including carriage of materials within all leads , lifts of material and other incidentals .

Applying a birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust,loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete including carriage of materials with in all leads, lifts and other incidentals.

Distempering (two coat) with oil bound washable distemper of approved brand and manufacture of required shade and undecorated wall surfaces to give an even shade over and including priming coat of whiting after thoroghly brushing the surface free from mortor dropping and other foriegn matter and also including preparing the surface even and sand paPered smooth including carriage of materials with in all leads, lifts and other incidental charges complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coats) to give an even shade and final finish after throughly cleaning the surface to remove all dirt, dust and other foreign matter etc including sand paPer smooth complete including carriage of material within all leads , lifts of material and other incidentals .

Providing under layer for plinth protection of 75mm ( seventy five millimetre ) thick (unconsolidated) bed of dry brick/stone aggregated 40mm nominal size well rammed and consolidated and grouted with fine sand including preparation of ground. including carriage of materials with in all leads, lifts and other incidental .

Providing plinth protection 50mm ( fifty millimetre ) thick in cement concrete 1:3:6 (one cement : three sand : six graded/crushed stone aggregates 20 mm( twenty millimetre nominal size) including finishing the top surface of concrete smooth including curing complete and carriage of materials with in all leads, lifts complete in all respect as Per direction and Satisfaction of Engineer-in-charge .

WS &SI Providing and fixing to wall ceiling and floor galvanized mild steel tube (medium grade) tube fittings and clamps including making good the wall ceiling and floors including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing P.V.C. storage tank complete 40mm (forty millimeters ) nominal bore galvanized mild steel scour tube with flitting 25mm(twenty five millimeters ) nominal bore galvanized mild steel over flow tube with fitting and mosquito proof couplings of approved municipal design 15mm ( fifteen millimeters) nominal bore ball valve and mosquito proof coupling PVC cover and locking arrangement including providing pads of size as required for inlet and out let hole including hosting up to all height above ground level 500 (five hundred liters) net capacity as per the direction of Engineer -in Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing P.V.C. storage tank complete 40mm (forty millimeters ) nominal bore galvanized mild steel scour tube with flitting 25mm(twenty five millimeters ) nominal bore galvanized mild steel over flow tube with fitting and mosquito proof couplings of approved municipal design 15mm ( fifteen millimeters) nominal bore ball valve and mosquito proof coupling PVC cover and locking arrangement including providing pads of size as required for inlet and out let hole including hosting up to all height above ground level 1000 (one thousand liters) net capacity as per the direction of Engineer -in Charge including carriage of materials with in all leads, lifts and other incidentals.

Providing and fixing vitreous China wash down, water closet squatting pan (Indian type W.C pan) size 580mm (Earth work, bed concrete, foot rest and trap to be measured and paid for separately) Orissa Pattern including carriage of material within all leads, lifts and others incidentals .

Providing and fixing vitreous China wash down, water closet (European type. W.C. pan) with integral 'P' or 'S' trap including jointing the trap with soil pipe in cement mortar 1:1(one cement : one sand) (Seat and cover to be measured and paid for separately):- Ordinary closet including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing plastic seat (Solid / Hollow type) and cover for wash down water closet with C.P. Brass hinges and rubber buffers white plastic seat and cover including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing vitreous China wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings Flat back 550mmx400mm (five hundred fifty millimetre x four hundred millimetre ) including carriage of material within all leads, lifts and others incidentals .

Angle back 400mmx400mm (four hundred millimetre x four hundred millimetre ) including carriage of material within all leads, lifts and others incidentals .

Providing and fixing vitreous China pedestal of approved specification /make for wash basin complete recessed at the back for the reception of pipes and fittings including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing high pressure PVC spigot and socket , waste and ventilating pipes ISI marked including jointing with approved adhesive etc. including carriage of material within all leads, lifts and others incidentals .

150 mm( one hundred fifty millimetre ) dia

110 mm( one hundred ten millimetre ) dia

75 mm( seventy five millimetre ) dia

Providing and fixing PVC single equal branch with oval access door, ISI marked insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts complete including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

110 mm( one hundred ten millimetre ) dia

75 mm( seventy five millimetre ) dia

Providing and fixing110 mm( one hundred ten millimetre ) dia PVC (P) or (s) trap for water closet (SQUATTINGPAN)ISI marked including jointing the trap with the pan and PVC pipe with approved adhesive etc. including carriage of material within all leads, lifts and others incidentals .

Providing and fixing PVC door bend with oval access door, insertion rubber washer 3 mm ( three millimetre ) thick bolts and nuts ISI marked complete including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

110 mm( one hundred ten millimetre ) dia

75 mm( seventy five millimetre ) dia

Providing and fixing PVC collars ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

110 mm( one hundred ten millimetre ) dia .

75 mm( seventy five millimetre ) dia .

Providing and fixing PVC plain bend ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

110 mm( one hundred ten millimetre ) dia .

75 mm( seventy five millimetre ) dia .

Providing and fixing PVC offset ISI marked including fixing with approved adhesive etc. complete including carriage of material within all leads, lifts and others incidentals .

110 mm( one hundred ten millimetre ) dia .

75 mm( seventy five millimetre ) dia .

Providing and fixing 110 mm X 75 mm. (one hundred ten x seventy five millimetre ) PVC floor trap ISI marked of self cleaning design including fixing with approved adhesive, cost of cutting and making good the wall and floors etc. complete including carriage of material within all leads, lifts and others incidentals .

providing and fix ing PTMT coloured / white high density polyethylene / poly propylene 10( ten) litres capacity ( full flush) European standard control low level flushing cistern with fittings with a pair of brackets with fittings such as lead valve, syphon, 15mm ( fifteen millimetre) nominal size PVC ball valve with polythene float, with push button, couplings for connections with inlet, outlet and over flow pipe, 40mm ( forty millimetre ) dia C.P. flush bend including cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (overflow pipe to be measured and paid for separately) complete in all respect including carriage of material within all leads, lifts and others incidentals .

Providing and fixing stainless steel kitchen sink of approved standard ISI make with drain board and C.P. waste with C.I. or M.S.Brackets painted white including cutting holes and making good the same but excluding fitting 610 x 510 mm ( six hundred ten x five hundred ten millimetre ) with bowl depth 200 mm. ( two hundred millimetre including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 32 mm ( thirty two millimetre ) C.P. Brass waste of approved specification/make for wash basin or sink compete in all respect including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 600 x 450 mm ( six hundred x four hundred fifty millimetre ) bevelled edge mirror of superior glass mounted on 6mm ( six millimetre ) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. Brass screws and washers complete including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 600 x 20mm ( six hundred x twenty millimetre ) C.P. Brass Towel rail complete with C.P. Brass brackets fixed to wooden plugs with C.P. Brass screws including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 600 x 120 mm ( six hundred xone hundred twenty millimetre) glass shelf with C.P. Brass bracket and guard rail complete, fixed to wooden plugs with C.P.Brass screws. including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 15 mm dia ( fifteen millimetre) dia metre C.P Brass pillar tap heavy duty with Capstan head including carriage of material within all leads, lifts and others incidentals .

Providing and fixing one hole basin mixing Faucet including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia mixer for kitchen sink with top /bottom swining spout including carriage of material within all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia CP bib tap heavy duty ( long body ) with capstan head & flanges including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia C.P Brass angle valve without nuts and pipe including carriage of material with in all leads, lifts and others incidentals .

Providing and fixing 15mm ( fifteen millimetre ) dia brass full way value with wheel within all leads , lifts of material and other incidentals .

Providing and fixing PVC waste pipe 32mm dia ( thirty two millimetre ) within all leads , lifts of material and other incidentals .

Providing and fixing P.V.C connection pipe with brass unions 300/450mm ( three hundred / four hundred fifty millimetre ) length 15mm ( fifteen millimetre ) nominal bore complete in all respect inculding carriage of materials within all leads , lifts of material and other incidentals .

Providing and fixing 100 mm ( one hundred millimetre ) dia C.P. gratings including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing C.P.charomium plated soap dish with C.P.brass bracked fixed to wooden cleats with C.P.brass screws etc.complete including carriage of material within all leads , lifts of material and other incidentals .

Constructing manhole with RCC top slab 1:2:4 mix ( one cement : two approved sand :four graded crushed stone aggregate 20mm ( twenty millimetre ) nominal size ) foundation concrete 1:4:8 ( one cement : four sand :eight graded stone aggregate 40mm ( forty millimetre ) nominal size) and inside plastering 15mm ( fifteen millimetre ) thick with cement mortar 1:3 (one cement three sand ) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix ( one cement two sand :four graded stone aggregate 20mm ( twenty millimetre ) nominal size ) finished smooth complete including curing and testing . Inside size 800mm x800mm x and 500mm (eight hundred x eight hundred x five hundred millimetre ) deep including C.I cover with frame (light duty single seal pattern -1) 455 x610mm ( four hundred fifty five x six hundred ten millimtre ) internal dimensions total weight of cover and frame to be not less than 38kg. ( thirty eight kilogram ) (weight of cover 23 kg (twenty three kilogram ) of frame 15kg (fifteen kilogram) .

With 200mm (two hundred millimetres ) thick walls of brick masonary using common brunt clay building bricks approved quality in cement mortar 1:3 (one cement : three sand .) complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing PTMT jet spray of approved quality and colour with one metre tube including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing PTMT toilet paper holder of approved quality and colour with steel screws and rawal plug etc.including carriage of material within all leads , lifts of material and other incidentals .

Supply and Fixing Cast iron cover wiith frame for man holes with frame of 500mm internal dia C.I Cover (medium duty0 with weigh of cover with frame 116kg and complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

Providing 200 mm( two hundred millimetre ) wide cast iron Rungs with chequered or ribbed non slip surface including fixing in manholes with 200mm x200mmx100mm ( two hundred x two hundred x one hundred millimetre ) cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 20mm ( twenty millimetre ) nominal size) including carriage of material within all leads , lifts of material and other incidentals .

Providing and fixing grill jali panel on chamber complete in all respect including carriage of material within all leads , lifts of material and other incidentals .

unipro

Suket Construction Co. Pvt. Ltd.