Providing and laying carpet and seal coat on existing road of Colony area at Dhuvaran GBPS.

Preparing surface by Brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunney bags to remove all loose dirt etc.(ii) Black top surface.

Providing & Laying 37.5 mm thick Bituminous Macadam with B.T. Aggregate as per MORTH specification & using bitumen emulsion RS-1 as per IS 8857 or or suitable low viscosity paving bitumen of VG 10 grade conforming to IS:73 for tack coat at 2.5 kg. / 10 sq.m. with mechanical sprayer and bitumen grade VG-30 for mixing at 34.00kg./ M.T.i.e.3.4percentage of total mix including heating the aggregate and asphalt by drum mix plant and spreading the same by paver finisher in line and level with proper camber and consolidation with vibratory roller/ power roller including providing all materials equipment, tools and plants, oil, kerosene, firewood, labour charges etc. complete using contractor’s own machineries drum mix plant and paver finisher etc. complete.

Providing and Laying 25 mm thick Semi Dense Bituminous Carpet with B.T. aggregate as per M.O.R.T. & H. gradation and bitumen grade ( VG-30/60-70 ) for mixing @ 50.00Kg./M.T. i.e. 5.00percentage by weight of total mix including heating the aggregate and asphalt by continuous batching of Drum mix plant and spreading the same by paver finisher in line and level with proper camber and consolidation with vibrator roller and power roller including providing all materials, equipments, tools, and plants oil, kerosene, firewood, labour charges etc. comp. using contractor’s own machineries drum mix plant and paver finisher etc. complete.

Providing and Laying asphalt painting on BT surface with bitumen grade( VG-30/60-70 ) as per rate of 5.00 Kg./10 Sq.m. and spreading stone dust on panting surface at the rate of 0.03 Cu.m./10 Sq.m. (including the cost of bitumen.)

Road marking with hot applied thermoplastic paints with reflectorising glass beads on bitumin surface providing and laying a hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250gms per sqm area, thickness of 2.5mm is excluding of surface applied glass beds as per IRC:35-2015. The finished surface to be level, uniform and free from streaks and holes. zebra patta /bump patta lane/center line/ edge line/cut patta. The white color marking should provide liminance coefficinet on cemend road shalll be min 130 mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux during the service life during the day time. The marking should meet the performance criteria for night time reflectivity, wet reflectivity and skid resistance as mentioned in the section-15 of IRC 35-2015.

Supplying and fixing cat eye (Stimsonite) made out from Acrilo beautile sterine injuction high compressed molding with reflector made of MMC provided with bituminous adhesive 100g. with each unit for fixing. (High Intensity grade)

Execution of any item of GOG SOR (23-24)/ Approved past work order of GSECL. As per site requirement and as & when required at any places of at DGBPS.