Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.7 LAdmitted-Finance GHUMARWIN DIVISION HP PWD GHUMARWIN | L1 | Admitted-Finance | |
| 2 | L2₹1.9 L+₹19,200 (11.5%)Admitted-Finance | L2 | Admitted-Finance | |
| 3 | L3₹2.1 L+₹47,700 (28.5%)Admitted-Finance | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | sachin kumar L1 | Sanjeev kumar Dhiman L2 | Mayur Kant Govt. Contractor L3 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work 283.50 Cum blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil l/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts. | 165 | Cum | 300 ₹49,500 Lowest | 350 ₹57,750 | 450 ₹74,250 |
| 2.00Re-Laying, jointing & testing of plain ended GI pipe ( Medium class )with circumfrential butt welded joints wherever required by electrical arc welding [ welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of Jindal /Surya Roshini / Tata/AST make of following dia meters conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers/ tapers all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe shall also include welding of flanged at joints at every 100mtrs spacing duly welded in three layers (two inner one outer) and all operations such as cutting welding, jointing, fabrication of bends, tees etc. a tees etc. and level & laying in lowering & excavated I trenches to ensure required! complete in all respects to the best suusfaction of the Engineer-in-charge (Earth work in trenches and the cost of providing fanges i/c nut & bolts, gasket will be measured and paid for separately). The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T of ISI marked inake. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the pare at tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes D.P. test of butt welded joints complete in ail respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts. | ||||||
| 2.01 | 65mm Dia (M) | 200 | Rmts. | 150 ₹30,000 Lowest | 160 ₹32,000 | 170 ₹34,000 |
| 2.02 | 65mm Dia (L) | 300 | Rmts. | 145 ₹43,500 Lowest | 155 ₹46,500 | 165 ₹49,500 |
| 3.00Providing and fixing of GI Union of various dia as per direction of Engineer-in-Charge complete in all leads and lifts. | ||||||
| 3.01 | 65mm Dia | 1 | Nos. | 800 ₹800 Lowest | 850 ₹850 | 950 ₹950 |
| 4.00 | Providing, fixing, CI sluice valve 65 mm dia Kirloskar/Kartar PN 1.0 of various dia, including flange as directed by Engineer-in-Charge complete within all leads and lifts. | 2 | Nos. | 8,000 ₹16,000 Lowest | 9,000 ₹18,000 | 10,500 ₹21,000 |
| 5.00Providing, fixing, MS flanges confirming to IS-6392-1971 (Latest with upto date ammendments) of class /Table -5 specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and carriage of material with in all leads and lifts. | ||||||
| 5.01 | 65mm Dia | 3 | Pairs | 700 ₹2,100 Lowest | 800 ₹2,400 | 900 ₹2,700 |
| 6.00 | Providing and fixing G.I. Reducer of 65mm diameter complete in all leads and lifts. | 18 | Nos. | 1,400 ₹25,200 Lowest | 1,600 ₹28,800 | 1,800 ₹32,400 |
Tender Value
₹1.4 L
EMD Value
₹2,898
Closing Date
21 Oct 2025, 11:00 amClosed
Executive Engineer
Jal Shakti Division Kangra
Re-Laying, Jointing and Testing of GI Pipe 65mm dia clear water tank to RD 0/500).
2025_HPIPH_117212_1
EE/JSDK/NIT/2025-3689-3739 dated- 08/10/2025
Open Tender
Civil Works
Item Rate
90 days
Kangra
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Executive Engineer
₹2,898
27 Oct 2025
8 Oct 2025
21 Oct 2025
8 Oct 2025
21 Oct 2025
8 Oct 2025
8 Oct 2025 - 21 Oct 2025
Amount
Excavation in foundation trenches etc. in earth work in all kinds of soil such as pick work, jumper work 283.50 Cum blasting work soft /hard rock, chiesling soft /hard rock where blasting is prohibited, slushy, daldal and saturated soil l/c pumping or bailling out water with in all heights stacking the excavated soil with 15cm layer when required into plinth sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus earth as per direction of Engineer-in-Charge with in all leads and lifts.
Re-Laying, jointing & testing of plain ended GI pipe ( Medium class )with circumfrential butt welded joints wherever required by electrical arc welding [ welding thickness shall be equal to pipe wall thickness) and testing of GI pipe of Jindal /Surya Roshini / Tata/AST make of following dia meters conforming to IS 1239-1990 (Part-II), having wall thickness as specified below capable of withstanding required test pressure, including manufacturing and fabrication of reducers/ tapers all short pieces, bends etc. as per site requirement made from parent tubes. The laying of pipe shall also include welding of flanged at joints at every 100mtrs spacing duly welded in three layers (two inner one outer) and all operations such as cutting welding, jointing, fabrication of bends, tees etc. a tees etc. and level & laying in lowering & excavated I trenches to ensure required! complete in all respects to the best suusfaction of the Engineer-in-charge (Earth work in trenches and the cost of providing fanges i/c nut & bolts, gasket will be measured and paid for separately). The fabricated bends shall have three or four cuts having its radius not less than five times the dia of pipe. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T of ISI marked inake. The damaged portion of the pipes ( If damaged during laying & jointing operation of pipe) and all other specials made from the pare at tube shall be provided with anticorrosive treatment by applying two coats of anticorrosive bituminous paint over a priming coat as per AWWA specifications C-203-1978. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing of pipes D.P. test of butt welded joints complete in ail respect and to the best satisfaction & direction of Engineer in charge with in all leads and lifts.
65mm Dia (M)
65mm Dia (L)
Providing and fixing of GI Union of various dia as per direction of Engineer-in-Charge complete in all leads and lifts.
65mm Dia
Providing, fixing, CI sluice valve 65 mm dia Kirloskar/Kartar PN 1.0 of various dia, including flange as directed by Engineer-in-Charge complete within all leads and lifts.
Providing, fixing, MS flanges confirming to IS-6392-1971 (Latest with upto date ammendments) of class /Table -5 specified welding both sides of flanges according to relevant standereds i/c nuts bolts and rubbur sheet washer confirming to IS 1367-1981 and carriage of material with in all leads and lifts.
65mm Dia
Providing and fixing G.I. Reducer of 65mm diameter complete in all leads and lifts.
Sanjeev kumar Dhiman (BID ID -572534)
Mayur Kant Govt. Contractor (BID ID -572535)
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.24 MB
Form6and8.pdf
Tender Documents • 0.70 MB
Termsandconditions.pdf
Tender Documents • 0.07 MB
BOQ_171285.xls
BOQ • 0.31 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .