SPECIAL REPAIRS TO BLDG NO P 47A 47AA 47AAI AND P 48 HQ 2 CORPS UNDER GE NORTH AMBALA CANTT

Amount

SCHEDULE A PART I (B/R WORKS) Taking down cement plaster including raking out joints hacking for key, scrubbing down with water etc, and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Demolition of brickwork built in cement mortar including all quoins, arches, pillars etc, and stacking of serviceable bricks and removal of debries to distance exc 250 mtr but n exc 500 mtr complete all as specified and as directed.

Material and labour for brickwork, with subclass 'B' bricks, straight or curved on plan to any radius, exceeding 6 metre mean radius built in cement mortar 1:6 complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete walls in cement mortar 1:6, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete walls in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 10 mm thick on fair faces of brick work or concrete surfaces on ceiling in cement mortar 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preperation of newly plastered surfaces of walls, chajjas, roof projection, cornices etc. and applying two coats of cement base paint (white or tinted) over a coat of alkali resistant primer complete all as specified and as directed.

Material and labour for applying two coats of cement base paint including preperation of old surfaces complete all as specified and as directed.

Material and labour for preperation of newly plastered or un-plastered surfaces of walls applying two coats of oil bound distemper using painting roller over a coat of minimum 1mm thick wall care putty to make surfaces completely smooth complete all as specified and as directed.

Material and labour for preparation of old decorated brick/concrete, plastered/un-plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over prepared surfaces of walls, pillars, cornices etc.complete all as specified and as directed.

Material and labour for preparation of newly plastered ceiling surfaces and applying three coats of white wash complete all as specified and as directed.

Material and labour for preparation of old decorated brick/concrete, plastered/un-plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash on ceiling complete all as specified and as directed.

Taking down chowkats or frames with shutter, area not exceeding 1.50 Square metre (w/o taking off shutters from frames) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Taking down chowkats or frames with shutter, area exceeding 1.50 Square metre and not exceeding 4.00 Square metre (without taking off shutters from frame) and removing from site, including cutting holes in wall/concrete for taking out existing hold fasts and making good the disturbed portion of jambs and adjoining surfaces in CM (1:3) and finishing the surfaces to match with existing finish including removal of serviceable/unserviceable material from site complete all as specified and directed.

Supply and fixing of rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing , cutting, drilling & welding, conforming to GDE Fe-410-0 or Fe-310-0 complete all as specified and as directed.

Supply and fixing mild steel works in bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required, hooks (stay), heavy, for large gates, bolts, hooks, hold fasts etc, similar articles conforming to Fe-290-Gde-E-165 including necassary cutting, drilling, welding & fabrication etc complete all as specified and directed.

Material and labour for PCC (1:3:6) type C-1 (using 20mm graded stone aggregates), as in holdfast complete all as specified and as directed.

Supplying and fixing of factory made 35mm thick, 2nd class HW, plain framed, panelled shutters (two panel) with lock rail and panel of 9mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Material and labour of second class hard wood glazed and skeleton shutters, 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, elc.;sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified and directed.

Supply and fixing of steel window box type, using ERW hollow 'P' section, factory made, comprising double frame for and including gauged and glazed skeleton shutter, 30mm thick, jointed internally with flat iron 25x3mm complete including hinges, handle, tower bolts, stops, lugs etc. all as shown on drawing No. TD-219 sheet 1/3 to 3/3 of HQ CE Chandigarh Zone as applicable complete all as specified and as directed. Note: (i) For the purpose of measurement and payment double shutter both glazed and gauzed with frame shall be considered as one unit. (ii) Unit rate quoted against this item shall also include the iron mongery and grill 10 mm square bar irrespective of whatever shown on drawings and one shop coat of zinc chromate primer . The pattern of grill shall be all as shown on drawing (iii) Glazing, wire mesh and painting shall be measured and paid for separately. (iv) The drawings may be referred from GE office or from this office during working hours.

Supply and fixing steel ventilator with top hung shutters, factory made IS 1038-1983 & IS 7452 - 1990 including hinges, peg stays with glazing bars etc with & including one shop coat of red oxide primer complete all as specified and as directed. Note: - Glass, wire gauge shall be measured & paid separately.

Supply and fixing of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Supply and fixing of stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

Supply and fixing of butt hinges, ISI marked 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fixing of aluminium anodised, 200mm long, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fixing of extruded aluminium alloy handles, 150mm long, fabricated type type, anodised complete all as specified and as directed.

Supply and fixing of mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed complete all as specified and as directed.

Supply and fixing of second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessaty' labours; articles not exceeding 200 cu.cm each complete all as specified and directed.

Supply and fixing of 150mm, mild steel ordinary rat tail rod pattern springs including roller and roller platefixed to wooden chowkhats or welded to angle iron chowkhat frame complete all as specified and directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of approved colour synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint, over a coat of red oxide zinc chrome primer complete all as specified and as directed.

Material and labour for preparation of new steel surfaces, of any description not otherwise described, over 10 cm width or girth and applying two coats of approved colour synthetic enamel paint complete all as specified and as directed.

Material and labour for premium quality, joint free, vertified coloured ceramic tiles (Square/rectangular) polished, area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm and 9 to 10 mm thick, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed in cement mortar (1:4) and including taking down old tiles, complete all as specified and directed.

Material and labour for premium quality, joint free, vertified coloured ceramic tiles (Square/rectangular) polished, area of each tile exceeding 0.42 sqm and not exceeding 1.00 sqm and 8 to 9 mm thick, in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 10mm thick rendering in cement mortar (1:4) and including taking down old tiles, complete all as specified and directed.

Supply and fix GI OREO Metal Suspended ceiling of approvaed materials of size 595 x595mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 grams/sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38mm made from 0.30mm thick (minimum) sheet, spaced at 1200mm center to center and cross "T" of size 24x25mm made of 0.30 mm thick (Minimum) sheet, 1200mm long spaced between main "T" at 600mm center to center to from a grid of 1200x600mm and secondary cross "T" of length 600mm and size of 24x25mm made of 0.30mm thick (minimum) sheet to be inter locked at middle of the 1200x600mm panel to from grids of 600x600mm and wall angle of size 24x24x0.30mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opeining for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27x37x25x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized butter fly level clips of size 85x30x0.8mm spaced at 1200mm center to center along main "T", bottom exposed width of 24mm of all "T"sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-Charge. GI metal ceiling lay in perforated Tegular edge global white colour tiles of size 595x595mm and 0.5mm thick with 8mm drop, made fo GI sheet having galvanizing of 100 grams/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece including taking down of ceiling board as exist at site complete all as per manufacturer;s instructions and as specified and directed. Note:-Make of ceiling boards and frames shall be of same manufacturer.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, laid in floor over and including cement screed bed 15mm thick in cement mortar (1:4) ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including taking down of tile or other finish as exist at site complete all as specified and directed.

Material and labour for premium quality, joint free, non skid light coloured ceramic tiles (Square/rectangular), area of each tile exceeding 0.11 sqm and not exceeding 0.18 sqm and 7 to 8 mm thick, in skirting over and including 10mm thick rendering in cement mortar (1:4) ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface including taking down of tile or other finish as exist at site complete all as specified and directed.

Material and labour for 25mm thick cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregates as in floor/sub base complete all as specified and directed.

Material and labour for premium quality,glazed coloured ceramic tiles of size 350mm x450mm x7mm thick or 250mm x350mm x7mm thick, on vertical surfaces of walls such as skirting/dado/risers of steps etc over and including 10mm thick rough finished plaster in cement mortar (1:4) ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and directed. Note:- Size of tile shall be cut as required.

Cutting chases, pinning in brick wall. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified and as directed.

Supply and fixing in replacement of stop valves, 15mm bore, fancy type, chromium plated, ISI marked, with long shank and cup (concealed type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Note : Weight of stop valve shall not be less than 0.575 Kg

Supply and fixing framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work including necassary cutting, drilling, welding conforming to Fe.290.Gde-E-165 complete all as specified and as directed.

Supply and fixing for aluminium alloy anodised (powder coated) door frame and shutters with hollow aluminium anodized sections including aluminium alloy anodized snap type beads, dish/D type door handles, glazed clip joint cleats, rubber gasket, dead lock 4 levers(one no for each door leaf), two numbers of aluminium alloy anodized tower bolts to each leaf, 4.8 mm thick tinted glass fixed with rubber gasket aluminium snap beading, 12mm thick prelaminated particle board interior grade in lower panel fixed with aluminium frame work (glass and board to be fixed in size as directed), double action floor spring hydraulically regulated made of 1.25mm thick aluminium alloy steel foundation box and main body with stainless steel cover and other part made of mild steel (one number floor spring for each door leaf), including fixing frame to wall/RCC members with rawl plugs complete all as specified and directed. Sections of doors shall be aluminium hollow sections as follows:- (a) Door frame single groove 101.6mm x 44.45mm x 2.15mm thick (b) Shutter top 47.62mm x 44.45mm x 1.95mm thick (c) Shutter bottom 114.30mm X 44.45mm X 2.15mm thick (d) Shutter vertical 85mm x 44.45mm X 1.80mm thick (e) Shutter middle 83.5mm x 44.45mm X 2.40mm thick (f) Gauging clip weighing not less than 0.097Kg/matre

upply and fixing anodised powder coated aluminium window shutters with chowkat made out of hollow aluminium section suitable for aluminium shutter and aluminium guard bar, each shutters having two nos aluminium hinges 100mm long, 100mm size aluminium handle, two nos 150mm long aluminium tower bolt,glazing with 5.00 mm thick glass fixed with glazing clips rubber beading and aluminium beading etc complete all as specified and as directed. (a) Chowkat size 100x44x1.60mm thick (b) All shutter member size 100x44x1.60mm thick Note:- The cost of fittings and fixtures,glass and beading etc are deemed to be included in quoted rates.

Supply and fixing of aluminium chequred grill powder coated with aluminium anodized of diamond shape with 6mm dia wires and mesh of ize 75x75mm in aluminium 'Y' channel and aluminium flat 25mm wide fixed with aluminium screws complete all as specified and as directed.

Supply and fixing in repair of sheet glass, 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 sqm. in each pane complete all as specified and directed.

Material and labour for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated, five layer, weight not less than 3.60 kg/Sqm, water proofing membrane, black finish, reinforced with non woven polyster matt, make as approved, with termofusable finish laid by force aopplication after applying a coat bitumious primer @ 0.40 ltr/ Sqm by the same membrane manufacturer of density 0.87 to 0.89 kg/ltr at 25' C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the sides and 150mm at the end, ceiling including a tack coat of hot blown bitumen 85/25 @ 1.2Kg per Sqm below APP and two coats of water proofing paint with aluminium finish on top of laid APP surfaces including preparation of surface over and including 50mm thick PCC 1:2:4 type B-1 using 20mm graded stone aggregates as in levelling course etc., including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust,etc. and brushing the surface with neat cement slurry @ 3.0kg of cement per sq. metre including taking down of existing treatment and brick tiles from roof and disposal of debries complete all as specified and directed. The vital physical and chemical parameters of the membrane shall be as under :- (i) The layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standard practice all as per manufacture's instuctions (ii) Joint strength in logitudinal and transverse direction at 23'Cat 650/450 N/5 cms (iii) Tear strength in logitudinal and transverse 150'C when tested in accordance with ASTM (d-5147) (iv) The laying of membrane shall be got down through the authorised applicator of manufactures of membrane only. Note:- The contractor will carry out ponding test after application of APP treatment before claiming payment.

Material and labour for cutting out cracks to V- section in existing roofs or terracing, cleaning out, wetting, grouting with cement and slurry 1:3, complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for cement concrete tiles of size 25cm x 25cm x 22mm thick, machine pressed,in floors, over and including 15mm thick screed bed (1:4), set, jointed and jointed in neat cement slurry and pointed with grey cement and no pigments, cut and polished complete all as specified and directed.

Material and labour for 8mm thich hollow profile designer PVC Wall Lining consisting of panel of width 250mm to 300mm inclusive of solvent cement and fixing at site on PVC frame with PVC beading (U, L section) over and including 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of wall plugs nails etc for fixing on to wall to make PVC Frame, all as per standard drawing, including taking down of old wall/ceiling board as exist at site complete all as per specifications and as directed.

SCHEDULE A PART II (E/M WORKS) Taking down carefully any type of point wiring (light, fan, socket or power) complete with fittings such as switches, ceiling roses, pendants, regulators, sockets, tube light fittings with all accessories etc., and/or drawing out from existing conduit/batten and removal of materials from site and making good the disturbed surfaces of wall, floors, ceiling etc to match with the existing surfaces with matching OBD/White wash/Distemper complete all as specified and as directed.

Material and labour for concealed conduit point wiring (conduit shall be concealed on wall and on surface in ceiling) using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLS-H, 1100 volts, ISI marked, PVC insulated and unsheathed stranded cable drawn through and including non metallic, medium grade PVC concealed conduit not less than 25.00mm to 32.00mm dia and its fittings, including cutting chasing on wall and surface conduit on ceiling, including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes, ISI marked, including 1.5 sqmm single core PVC insulated and unsheathed FRLS-H cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dolly with and including MS flush boxes of 2 to 18 modules with inner and outer cover plates, confirming to IS 5139 of 1969 and IS 14772 of 2000 for fixing modular switch sockets for one light point (For flourescent Tube/ LH, Bldg Security light, Mirror light)/fan point/bell point controlled by one one way switch complete all as specified and as directed. Notes :- (i) Switch, socket, ceiling rose, lamp holder, bell, bell push and fan regulators to be measured and paid for separately. The quoted rates are deemed to be included for providing cover plates and MS flush boxes as required at site. (ii) PVC Conduit conforming to IS 9537 part I & III. (iii) All chases will be cut by chase cutter only and surfaces shall be make good as per existing surfaces. (iv) The concealed conduits and MS boxes as fixed against new point wiring, shall be verified by Engineer-in-Charge before making good the surfaces by plastering and other finishes.

Description all as per Srl item No.53.00 here in before but for one 3 pin socket outlet point 5 Amp on Independent board.

Description all as per Srl item No.53.00 here in before but for one 3 pin socket outlet point 5 Amp on same board.

Description all as per serial item No.53.00 above, but for one metal clad box point (independent) power point, with 4 Sqmm PVC, FRLS-H, unsheathed, multistranded cable, 1100 volts grade, ISI marked, including 4 Sq mm size, green colour, PVC insulated FRLS-H, continuous copper earth wire and connected to common earth dolly complete all as specified and as directed.

Supply and fixing of switch modular, 6 Amps, one way, one module, flush type, single pole, 230 volt, ISI marked complete all as specified and directed.

Supply and fixing of switch modular, 16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of socket modular, 2/3 pin, 5/6 amps, one way, two module, single pole, 230 volts complete all as specified and directed.

Supply and fixing of socket outlet, modular, 2/3 pin, 6/16 Amps, one way, two module, single pole, 230 volts, ISI marked complete all as specified and directed.

Supply and fixing of Television (TV) socket outlet, 2/3 pin, 5 Amps, 230 volts complete all as specified and as directed.

Supply and fixing of fan regulator, modular, 120 watt, two module, 230 volts, 50 Hz, AC supply, suitable for ceiling fan any type/make/sweep complete all as specified and as directed.

Supply and fixing of bell push, modular type, 6 Amps, 230 Volts, one module complete all as specified and as directed.

Supply and fixing of electric bell buzzer, ding dong type, AC, 230 volts, single pole complete all as specified and as directed.

Supply and fixing of ceiling rose, surface bakelite, 65x50mm, three terminals along with back plates complete all as specified and as directed.

Supply and fixing of lamp holder, PVC/Polycarbonate type, with back plate suitable for batten fittings complete all as specified and as directed.

Supply and fixing in replacement of retrofit LED Bulb of 12 watt suitable for batten holder B-22 complete all as specified and directed.

Supply and fixing of MCB SP, 6 to 32 Amps, 240 volt, 10 KA, 'C' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of MCB SPN, 40 to 63 Amps, 240 volt, 10 KA, 'C' curve, ISI marked, connected with suitable lugs and testing complete all as specified and directed.

Supply and fixing of sheet metal enclosures vertical load line TPN distribution board, 6 ways, double door powder coated alongwith 200 Amp rated busbar with and including MCCB 4 pole 125 Amp, 16kA adjustable type as incomer with suitable size of MS cabinet fabricated by 2mm thick MS sheet and making all type of connections using proper size of gland for incomer cable complete loadline TPN concealed on wall surface & making good the disturbed surfaces as per existing and dismantling and taking down the existing DB's of any type complete all as specified and as directed.

Supply, insatallation, commissioning and testing of distibution board for MCBs, SPN, 12 way, acrylic double door, IP 43, as per IS 8623, 240 volts, with and including 200 amps fully insulated copper bus bar fixed on wall duly grouted in solid block wall with and including copper lugs/thimbles duly crimped for connection including taking down and removal of old unserviceable DB with MCB of any capacity, size and type complete all as specified and directed. Note :- MCB shall be measured and paid separetely.

Supply and fixing of RCBO, 40 Amps, double pole, conforming to IEC-61009, 2 module, 300 ma (HI immunity) sensitivity, 230 volts, 50 Hz, with degree of protection IP-20, for three protection, over load prtection, earth leakage protection, and short circuit protection, ISI marked complete all as specified and directed.

Supply and fixing in replacement of over voltage release, one module, 230 volts, single phase, adjustable from 170 volts to 230 volts in one module suitable for (1Ph+N) complete all as specified and directed.

Material and labour for sub main wiring with two single core, 6 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 25 mm dia, ISI marked for housing cables, concealed on wall and on surface in ceiling, including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 6 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Material and labour for sub main wiring with two single core, 10 sqmm, FRLS-H, 1100 volts grade, ISI marked, with multistranded, PVC insulated unsheathed copper conductor cable, drawn in and including rigid non metallic PVC conduit, medium grade, not less than 32 mm dia, ISI marked for housing cables, concealed on wall and on surface in ceiling including necessary cutting, chasing with machine and making good disturbed surfaces as per existing, with accessories with and including one additional 10 sqmm, PVC insulated, stranded copper conductor, FRLS-H, green colour for earth continuity conductor connected to common earth dolly including taking down old unserviceable sub main wiring of any type and making good the disturbed surface complete all as specified and as directed. Note- Three runs of cable and one run of concealed conduct shall be measured as one unit.

Supplying and fixing in replacement of 1100 volts grade, heavy duty cable, PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, 16 sq mm complete all as specified and directed.

Supplying and fixing in replacement of 1100 volts grade, heavy duty cable, PVC insulated, aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm suspension wire, one twin core cable flat or circular, 10 sq mm complete all as specified and directed.

Supply and fixing in replacement channel for fixing of LED tube rod, made of aluminium housing body in CRCA sheet, suitable for 18/20 watt LED tube light, high efficient, AC, 220-240 Volts, 50 Hz, with built in electronic drivers having THD < 10%, connecting up with core 1.5 sq mm flexible copper conductor cable from ceiling rose to connector block of light fitting including T-5 LED tube rod 1x18/20 watts, AC, 220-240 Volts, 50 Hz, high efficient T8 with aluminium extrusion heat sink for optimum performance with high lumen efficiencydisconnecting and taking down existing light fitting and removal complete all as specified and directed.

Supply and fixing of indoor decorative recesed vertically/horizontal mounting, TOP opening, LED light fitting, 2 feet x 2 feet ,box type, with a unique drop down opal diffuser, leading to uniform lighting experience, illuminating, high efficient, aluminium housing body in CRCA body suitable for LED, high efficient, AC 220-240 volts, 50 Hz, with and including 36 watt LED luminaries (warm/cool as per site requirement), environment friendly, high efficient, with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed.

Supply and fixing of decorative, surface mounted, LED mirror light, wall mounting light fitting, high efficient PMMA diffuser, aluminium housing in CRCA body suitable for and including 10 watt LED tube, high efficient, AC 220-240 volts,50 Hz, and compact and energy efficient, epoxy powder coated, CRCA sheet, connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing old unserviceable light fitting of any description and removal from site complete all as specified and directed.

Supply and fixing in replacement of LED security light luminaire 45 watt, 230 volts, 50 Hz, made up of die cast aluminum housing with black epoxy powder coating with cover heat resistant glass, safety input voltage range 170 to 270 Volts, IP66 protection, including service brackets of GI pipe 25mm bore, light grade, of length 0.90 metre, bent to required shape, fixed with MS clamps of size 40 x 6mm flat iron strip, 150mm long and 4 Nos.8mm dia stainless steel bolts and nuts and washers and suitable reducer for connecting to GI pipe as required at site and making all required electrical connections using 3 core copper flexible cable from terminal box to ceiling rose including disconnecting and taking down of old fitting with bracket as existing complete all as specified and as directed.

Supply and fixing of indoor decorative circular bay light of 60 degree angle LED hanging light with opal diffuser, high efficient, aluminium housing body in CRCA body suitable for LED, high efficient, AC 220-240 volts, 50 Hz, with and including 75 watt LED 7200 lm luminaries (warm/cool as per site requirement), environment friendly, high efficient, with aluminium extrusion, heat sink and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light fitting including disconnecting and taking down of existing light fitting and removal complete all as specified and as directed.

Supply and laying of LT underground cable, XLPE insulated, screened, PVC bedded, galvanised steel strip or wire armoured, electric power cable (heavy duty), 1100 volts grade, with stranded aluminium conductor of size 3.5 core, 25 Sqmm and laying in trenches including disconnecting and taking down of old unserviceable existing cable and removal complete all as specified and as directed. Note:- Excavation and earth work shall be measured and paid separetely.

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre in depth and getting out in soft/loose soil for laying of cable complete all as specified and as directed.

Returning filling in, in soil, including spreading leveling watering and well ramming in layers not exceeding 25 cm each complete all as specified and as directed.

Removing excavated spoil/materials to a distance not exceeding 50 metre and depositing where directed at level not exceeding 1.5 above the starting point complete all as specified and as directed.

Material and labour for Sand cushioning to cable with a layer of sand 8 cm deep before laying the cable and 15 cms deep after laying the cable (punned down to 18 cms depth after laying and stretching of cable ) complete all as specified and as directed.Note:- Punned thickness 18cm shall be measured for payment purposes.

Supply and laying un-reinforced, precast concrete cable cover, class LV type 1, flat, with peak, size 250 mm x150 mm x40 mm complete all as specified and as directed.

Supply and fixing in replacement of light grade, GI tubing, of size 40mm dia, for cable protection and fixed with clamp to pole and wall with nuts and bolts complete all as specified and as directed.

Taking down fan any type/description, after disconnecting all electrical connections carefully, sealing cable end, dismantling blades and removing fan and material and labour for scrapping old paint, cleaning dust and washing with washing powder, filling cavities with filler, spray painting complete fan with two coats of synthetic super enamel paint, writing MES No with black colour permanent marker and hanging the fan at the existing or new location and making all electrical connections using 3 core copper flexible cable drawn through flexible PVC conduit pipe and testing complete all as specified and directed.

Supply and fixing of sheet metal enclosure, single pole with a two pin and earth plug and socketcomplete with one single pole MCB of 20 to 32 Amps, 'C' Curve, 240 volts complete all as specified and directed.

Disconnecting/dismantling old unserviceable earthing and material and labour for new earthing with galvanised earth plate electrode 600mm x 600mmx 6mm thick surrounded by charcoal and salt, buried directly in ground vertically in a pit of depth not less than 2.25m below ground level with top edge of the earth plate not less than 1.5m below normal ground level, connected to 4.00 mm GI wire earth lead by means of bolts, nuts, checks nut and washers made out of galvanized iron or steel, earth wire and thimbles protected by galvanized steel pipe 15mm dia (light grade) and connected to main switch or main control board all as shown in Electrical Plate No.3 of SSR Part-I & including necessary excavation and earth work in any type of strata, PCC (1:3:6) type C1 in pit, RCC cover slab 50mm thick in 1:2:4 type B-1 using 8mm dia TMT bars @10cm c/c both way with one 8mm dia bar as handle for lifting, 20mm dia GI medium grade watering pipe, funnel, wire wesh, charcoal or coke & salt in alternate layers, etc.all as indicated including testing on completion complete all as specified and directed. Note:- The new earthing shall be provided adjecent to old earthing site on the locations as directed by engineer in charge.

Note:- Amount of credit of Rs. 67,100.00 for retrieved materials is mentioned in Schedule of Credit Page Nos. 18R of tender documents in pdf form which will be deducted offline while acceptance of tender.

Swami Enterprises

Durga Enterprises

bhagwandasswazirchand

Karishan Kumar goel