Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 LAccepted-AOC HIMACHAL PRADESH HP | ₹1.2 L Quoted ₹1.4 L | L1 | Accepted-AOC Award |
| 2 | L2₹1.5 LRejected-Finance HIMACHAL PRADESH HP | ₹1.5 L | L2 | Rejected-Finance Other than Lowest |
| 3 | L3₹1.6 LRejected-Finance ANDHRA POWER HOUSE DIVISION HPSEBL CHIRGAON 171208 | SHIMLA | HIMACHAL PRADESH | 171208 | ₹1.6 L | L3 | Rejected-Finance Other than Lowest |
| Sl No | Description | Qty | Unit | GULZARI LAL L2 | Rajesh Kumar L3 | Raj Kumar Prop R.K. Construction L1 |
|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundations trenches etc. ( for pipes and pits ) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by reamming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of its original conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects. | 44.1 | Cum | 425 ₹18,742.50 | 450 ₹19,845 | 400 ₹17,640 |
| 2.00 | Repair of Rising main / Gravity main by Cutting and Welding of GI pipe dimeter mentioned below i.e. By Butt Welding with gas welding two layers including cost of cutting of GI pipe and carriage of Welding Set/DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in -charge in all leads and lifts.80 mm dia | 59 | Joints | 625 ₹36,875 | 695 ₹41,005 | 600 ₹35,400 |
| 2.01 | 65mm dia | 61 | Joints | 595 ₹36,295 | 600 ₹36,600 | 550 ₹33,550 |
| 3.00 | Manufacturing laying and jointing of GI bends of following mentioned dia of required degree conforming to relevant specifictions upto dateammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin 80 mm dia | 5 | Bends | 1,100 ₹5,500 | 1,500 ₹7,500 | 1,000 ₹5,000 |
| 3.01 | 65mm dia | 3 | Bends | 990 ₹2,970 | 1,100 ₹3,300 | 900 ₹2,700 |
| 4.00 | Providing, Supplying and Fixing Cast Iron Sluice Valve below menntioned dia class PN-1 with flange Table -5 of BIR/KARTAR/PELICAN make BIS No. 14846 or latest upto date ammendments including cost of welding of companion flanges, nut & bolts, rubber insertion washers (gasket) etc. complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge in all leads and lifts.80 mm dia | 1 | No | 16,000 ₹16,000 | 17,000 ₹17,000 | 15,000 ₹15,000 |
| 4.01 | 65mm dia | 1 | No | 13,500 ₹13,500 | 14,500 ₹14,500 | 13,000 ₹13,000 |
| 5.00 | Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portions requiring blasting upto a distance 20 meters disposing of un-serviciable materials, stacking the serviciable materials and neatly dressing the surface in all leads and lifts. | 54 | Cum | 400 ₹21,600 | 450 ₹24,300 | 350 ₹18,900 |
Tender Value
₹1.7 L
EMD Value
₹3,500
Closing Date
19 Jan 2026, 10:00 amClosed
Executive Engineer
EE JSV Mandi
Repair and maintenance of Gravity Main 80mm and 65 mm at various RDs by cutting welding and testing of old Gi Pipe and Providing and fixing of CI Sluice valve of 80mm and 65mm dia under Jal Shakti Section Talyahar
2026_HPIPH_125457_1
16380-479
Open Tender
Civil Works
90 days
Mandi
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
₹3,500
25 Feb 2026
9 Jan 2026
19 Jan 2026
9 Jan 2026
19 Jan 2026
9 Jan 2026
Excavation in foundations trenches etc. ( for pipes and pits ) upto all depths in all kinds of soil such as pick work, jumper work, blasting and chiselling soft/hard rocks where blasting is prohibited in all leads and lifts including trimming and dressing of sides levelling of bed to correct excavation and returning the stacked soil after laying jointing and testing of G.I.Pipes in trenches in 15 cm. layers including consolidating each deposited layer by reamming and watering and then disposing of all surplus excavated soil as directed in all leads and lifts and soring strutting/timbering and dewatering where ever required including restoration of un-metalled/metalled paved surface of its original conditions including cost of diversion for traffic night signals fixing caution boards and fencing etc.complete in all respects.
Repair of Rising main / Gravity main by Cutting and Welding of GI pipe dimeter mentioned below i.e. By Butt Welding with gas welding two layers including cost of cutting of GI pipe and carriage of Welding Set/DG Set by mechanical transport and head load up and down side of pipe line complete job in all respect and to the entire satisfaction of the Engineer-in -charge in all leads and lifts.80 mm dia
65mm dia
Manufacturing laying and jointing of GI bends of following mentioned dia of required degree conforming to relevant specifictions upto dateammendments having wall thickness mentioned below. The joint shall be jointes circumferencial butt welded joint wah croumferencial butt welded joints by electric arc welding in requisite what of weld rune so as to achive the ma the minimum effective thorat thickness and electrodes of 250 mm to 6.30 mm of Advani Gedikion (Ador) CITOUET / Faab length of weld conforming to 15816100 specification by using welding make conforming to 158141001. af site of work complete in all respects and to the entire satisfication of Engineerin 80 mm dia
65mm dia
Providing, Supplying and Fixing Cast Iron Sluice Valve below menntioned dia class PN-1 with flange Table -5 of BIR/KARTAR/PELICAN make BIS No. 14846 or latest upto date ammendments including cost of welding of companion flanges, nut & bolts, rubber insertion washers (gasket) etc. complete in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge in all leads and lifts.80 mm dia
65mm dia
Removal of slips in all kinds of soil (including saturated soil but excluding boulders and rocky portions requiring blasting upto a distance 20 meters disposing of un-serviciable materials, stacking the serviciable materials and neatly dressing the surface in all leads and lifts.
Please Enable Macros to View BoQ information
Terms and conditions
The work should be executed as per PWD/JSV specifications and to the entire satisfactions of the Engineer-in Charge.
The GI pipes shall be supplied by the department free of cost from JS Divisional store Raghu Nath Ka Padhar on proper indent.
The GI fittings shall be provided by the contractor at their own cost.
The Contractor will be fully responsible for watch and ward of material at site of work.
Nothing shall be paid for rejected/sub-standard material at site of works.
The work should be completed in the stipulated period.
The rates should be inclusive with GST and carriage
1% labour cess will be deducted from the bill of the contractor.
GST as applicable will be borne by the contractor.
Executive Engineer
JS Division Mandi
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.60 MB
Form6.pdf
Tender Documents • 0.58 MB
Form8.pdf
Tender Documents • 1.24 MB
BOQ_184801.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid