16/Fire/2019-20

Amount

Comprenehsive Maintenance Contract for fire fighting system installed at above cited building including per month/ fortnightly/ weekly visit by Engineer with Technician and helper as indicated and whenever required or in case of any defect in the system. Also includes servicing, maintenance and testing and Cleaning of the System as required for proper working condition round the clock etc. complete in all respect to the entire satisfaction of Fire officer. The detailed lists of existing equipments are available at concern Fire Control Room or at site.

Connaught Place Corridor a) Engineer - 1 No. - 04 Visits / Month b) Technical Foreman - 02 Nos. - 04 Visits (Each) / Month c) Helper - 02 Nos. - 04 Visits (Each) / Month

Shaheed Bhagat Singh Place a) Engineer - 1 No. - 04 Visits / Month b) Technical Foreman - 01 No. - 04 Visits / Month c) Helper - 02 Nos. - 04 Visits(Each) / Month

Talkatora Stadium (Old and New Building) and Shivaji Stadium a) Engineer - 1 No. - 04 Visits / Month b) Technical Foreman - 02 Nos. - 04 Visits (Each) / Month c) Helper - 02 Nos. - 04 Visit (Each) / Month

Mandir Marg Barat Ghar,Moti Bagh Barat Ghar, Khan Market Barat Ghar and Lodhi Colony Barat Ghar. a) Engineer - 1 No. - 04 Visits / Month b) Technical Foreman - 01 No. - 04 Visits / Month c) Helper - 02 Nos. - 04 Visits(Each) / Month

Kaka Nagar Barat Ghar,Community Centre Babar Road, Swati Working Girls Hostel and Community Centre Golf Link Club. a) Engineer - 1 Nos. - 04 Visits / Month b) Technical Foreman - 01 No. - 04 Visits / Month c) Helper - 02 Nos. - 04 Visits (Each)/ Month

Replacement / Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required :

25 mm dia.

32 mm dia.

50 mm dia.

80 mm dia.

100 mm dia.

150 mm dia.

200 mm dia.(wall th. =6.3mm)

Rewinding of 3 Phase, 50 HZ 440 Volt monoblock/main pump set of 3000 RPM including providing, fixing / commissioning of insulated copper winding wire (Wire –ATLAS or equivalent) of required size and capacity ( burnt copper wire shall not be returned to the deptt.) with providing suitable grade varnish (Doctor back make or equivalent ), packing papers, sleeves etc. The work including dismantling of existing motor with proper tools, cartage charge & labour charges etc and providing and fixing of nuts bolt of required size and proper alignment of the entire satisfaction Fire Officer.

5 HP Capacity

7.5 HP Capacity

10 HP Capacity

15 HP Capacity

20 HP Capacity

25 HP Capacity

50HP - 60 HP Capacity (incl. 60HP)

Above 60HP - 75 HP Capacity (incl. 75HP)

Above 80 HP to 100 HP (incl 100 HP)

Above 100 HP to 125 HP (incl 125 HP)

Above 125 HP to 150 HP (incl 150 HP)

Repairing of Jockey/Main/Diesel pump of following with replacement/repairing of mechanical seal, ball bearing, gun metal sleeve, impeller welding & smoothing of S.S. shaft, including carriage of heavy fire pump from pump room to the workshop by mechanical transport including loading, unloading through chain pully etc. and dismantling of pump set and refixing the same after repairing etc. complete to the entire satisfaction of Fire Officer.

60 HP to 100 HP

Above 100 HP to 125 HP

Replacement / Providing, Fixing, testing & commissioning of various following type MCB 3/4 Pole, 415 volt, 50 HZ type L&T/Schneider Electric make or equivalent including dismantling of burnt MCB, connection, wiring, thimble etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of Lead Acid Battery Exide/Amron/ Luminous (Heavy Duty) make of 12 volts, 20 plates and 150 AH fully charged for operation of D.G.Set/Diesel driven pump installed fire pump room including battery terminator and connecting copper cables of approved quality and including dismantling battery etc. as required at site & making necessary connection complete in all respect to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of Pressure Gauge in the main pipe line etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of single headed gun metal internal hydrant valve with instantaneous Gunmetal coupling of 63 mm dia with cast iron wheel ISI marked conforming to IS 5290 (Type -A) with blank Gunmetal/Stainless Steel cap and chain as required to the entire satisfaction of Fire Officer

Replacement / Providing, Fixing, testing & commissioning of Single headed gunmetal external yard hydrant valve with 1 No. 63 mm dia instantaneous FM Gunmetal/Stainless Steel coupling and cast iron wheel, ISI marked, conforming to IS 5290 (type A) with blank Gunmetal/Stainless Steel cap and chain as required.

Replacement / Providing, Fixing, testing & commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required.

40 mm dia.

50 mm dia.

65 mm dia

80 mm dia.

100 mm dia.

150 mm dia.

Replacement / Providing, Fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with non rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and conforming to IS 780 of following sizes as required :

80 mm dia.

100 mm dia.

150 mm dia.

200 mm dia

Replacement / Providing, Fixing, testing & commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required :

65 mm dia

80 mm dia.

100 mm dia.

150 mm dia.

200 mm dia

Replacement / Providing, Fixing, testing & commissioning of 63 mm dia, 15 m long Gun Metal RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required

Replacement / Providing, Fixing, testing & commissioning of first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. a) 30 M

Replacement / Providing, Fixing, testing & commissioning of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required :

2 way-100 mm dia M.S. Pipe

4 way - 150 mm dia M.S. Pipe

Replacement / Providing, Fixing, testing & commissioning of air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.

Replacement / Providing, Fixing, testing & commissioning of 15mm dia (Pendent Sprinkler) quartzoid bulb type sprinklers of rating 68 degree centigrade with required accessories

Replacement / Providing, Fixing, testing & commissioning of pressure switch in M.S. pipe line including connection etc. as required.

Replacement / Providing, Fixing, testing & commissioning of flow switch in following sizes M.S. pipe including connection etc as required.

100 mm dia.

150 mm dia.

Replacement / Providing, Fixing, testing & commissioning of sprinkler flexible pipe (UL Listed) of stainless steel complete with 15 NPT on reducer thread with maximum working pressure of 175 PSI test pressure of 875 PSI (Burst) with branch line (Inlet) 25mm NPT male thread to sprinkler head (Outlet) 15mm NPT female thread with reducer, nipple, 2 side brackets, center bracket, stockbar of following sizes complete as required.

Replacement / Providing, Fixing, testing & commissioning of adjustable rosette plate for 15mm dia in white finish UL Listed or FM approved complete as required.

Replacement / Providing, Fixing, testing & commissioning on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 5000 Litre x 4 = 20000 Litre

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level as per direction of Engineer-in-charge.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Replacement / Providing, Fixing, testing & commissioning of tyre coupling, rubber bush and fixing the pump in proper alignment, line and level by providing suitable size of nuts and bolts etc. complete to the entire satisfaction of Fire Officer.

20 HP Capacity

Above 20 HP to 100 HP Capacity

Replacement of damaged gun metal/Stainless Steel shut off nozzle with 5mm orifice as per specification in the existing hose reel etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of CO2 Washer in horn of fire extinguisher etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of Hose Reel S.S. Clamp etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of Gasket in landing valve after removing and refixing the same of shaft etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of G.I. Union, band and socket etc. in G.I. pipe including cutting and threading the pipe and making long screws etc. complete to the entire satisfaction of Fire Officer. a) 25 mm dia

Dismantling, Repairing and Servicing of D.G. Engine self, changing of damaged armature and making connection to D.G. Fire Engine etc. complete to the entire satisfaction of Fire Officer.

Replacement / Providing, Fixing, testing & commissioning of Battery Charger suitable for double battery system upto 180 AH of 12 volt / 25 plate heavy duty etc. complete to the entire satisfaction of Fire Officer.

Complete servicing of Diesel driven fire engine of model DSM, Kirloskar make/ Leyland make including replacement of air filter, fuel filter, oil filter by pass filter and packing including Replacement / Providing, Fixing, testing & commissioning of servicing kit and replacement of engine oil as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition and complete in all respect to the entire satisfaction of Fire Officer.

60 HP to 100 HP

101 HP to 150 HP

Complete servicing and Fixing of Diesel Driven Fire Engine due to oil seal leakage and filling of water in the Fire Engine of model DSM, Kirloskar make including replacement of all filter kit, piston, piston ring, liner, rod, ring, head, gasket, seal set complete, thimble, Hose pipe, packing and repairing of bearing sets, pump injector etc. complete and providing & fixing items in the engine whenever necessary and replacement of engine oil (Castrol 40W) coolant as per capacity of fire engine of approved grade & quality including labour charges as required at site and making the diesel driven fire engine in proper working condition etc. complete to the entire satisfaction of Fire Officer. Above 100 HP

Replacement / Providing, Fixing, testing & commissioning of Electrical Control panel for terrace pump,wall mounted type, fabricated out of 16 swg. Thick CRCA sheet,compartmentalised with hinged lockable doors,dust and verminproof, powder coated of approved shade,cable alley,inter-connection,having switchgears and accessories mounting and internal wiring,earth terminals, numbering etc. complete in all respect,suitable to operat 10 HP Motor on 415 V + 10%, 3 Phase, 50 Hz. AC supply with enclosure protection class IP-55 etc. to the entire satisfaction of enginner in-charge / Fire officer.

Dismantling of Damaged Radiator of Diesel Fire Pump of model DSM( Kirrlosker make & equivalent) and Providing / Fixing / Commissioning new radiator for suitable Diesel Fire Pump etc. complete to the entire satisfaction of Fire Officer.

Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position including two coats of synthetic enamel paint over one coat of red oxide primer etc. complete all as specified and as per direction of Fire Officer/Engr-in-Charge

Replacement / Providing, Fixing, testing & commissioning of submersible pump of 1.50 HP working on 50Hz frequency of model CORA 100 XUMA LX(S) Single phase with the following specifications: a) Pump Type : CORA 7C/7G b) RatedCurrent : 10A c) Overall Length : 862mm d) Weight: 18 Kg e) FlowRate : 6 m3/hr f) Head : 37 m

Credit of unservicable material i.e. M.S. Pipe,butterfly valve , sluice valve , hose reel drum , air vessel etc. including dismantling the same obtained from Item No.02 etc complete in all respect to the entire satisfaction of Fire Officer.

Credit of dismantle battery including brass terminal required obtained from Item No.03 size and disconnection cables etc. complete in all respect to the entire satisfaction of Fire Officer.

Credit of unserviceable pressure gauges including dismantling the same etc obtained from Item No.05 complete in all respect to the entire satisfaction of Fire Officer.

Credit of old unserviceable submersible pump, Timer etc

Credit of unserviceable internal landing valve and external yard hydrant (gun metal obtained from any of the items) including dismantling the same etc obtained from Item No.06 & 07 complete in all respect to the entire satisfaction of Fire Officer.

Maku and Co