PROVISION OF STORAGE SHED AND ADDN ALTN OF OFFICE BUILDING AT AF STATION BAREILLY

Amount

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in hard / dense soil complete all as specified and directed.

Excavation in trenches not exc. 1.50 m wide and not exc. 1.50 m in depth for foundation etc. or for manholes, cesspits, shafts etc. not exc. 10 Sqm on plan and getting out in soft / loose soil complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed.

Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

Excavation in post holes (or similar holes) each not exc. 0.50 Cum, getting out, returning, filling and ramming earth or broken rubble mixed with earth around in layers not exc. 25 cm watering and removing surplus soil to a distance not exc. 50 m and making good surface as in hard / dense soil complete all as specified and directed.

Supply and spread moorum/red bajri 100mm thick in floors hand roll and cosolidated all as specified and directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30cm thick, watering, ramming/ hand rolling and finishing to required size, shape, etc n exc. 1.5 m high form base all as specified and directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 (40mm graded aggregated) as in sub base flooring all as specified and directed.

M & L for providing plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L 50 mm thick cement concrete 1:2:4 type B-1 (20mm graded aggregated) as in flooring all as specified and directed.

M&L forming construction joints 30mm deep x 10mm wide filled with ceiling compound Gd 'A' all as specified and directed.

M & L for providing plain cement concrete, type D-2, 1:4:8 (using 40 mm graded crushed stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L Providing cement concrete type B-1, 1:2:4 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates including weathering, slightly rounded for chamfered angles and throating complete all as specified and directed.

M & L for providing 50 mm thick pre-cast cement concrete louvers or RCC Jali in cement concrete 1:2:4 type B-0, using 12.5 mm graded crushed stone aggregate and set in cement mortar 1:4 including all mouldings etc. and necessary form work complete all as specified and directed.

M&L Brick work with Fly ash bricks straight or curved in plan n.exc 6 m mean radius built in cement mortar of 1:6 with using fly ash bricks complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick or concrete surfaces and finished even and fair without using extra cement complete all as specified and directed.

M&L preparation of new or untreated surface of wall and applying three coats of white wash complete all as specified and directed.

M&L Mild steel work in tubular trusses including special shaped washer etc complete in using ERW or induction butt welded tubes confirming to IS 1161-1979 grade St-240 including painted one shop coat of zinc chromate primer paint complete all as specified and directed.

M&L MS screw bolt diameter of neck 5 to 10mm (machine made) with hexoganal or square head at one end screwed the other or screwed both ends each screw end fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

M & L for preparation of new or previously untreated steel and iron surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

S&F Pre-painted Trapezoidal profile galvalume aluminium zinc coating steel sheet (Make: Tata bluescope/ Jindal ) 0.50mm thick (base metal thickness) of any colour having tensile strength of 550 Mpa minimum yield strength conforming to IS - 513 (1994) coated with hot dip alloy of 55% aluminium + 43.50%Zinc +1.50% silicon and finished with resin coat ( of thickness not less than 35 micron) on both surface @150gm/sqm of coating (total both surfaces) of approved colour as in roof covering/cladding, fixed with self tapping screws (make hilty/fissers), neoprene and epdm washers class 3 of AS-3566(5.5-14X5 for crest and 5.5-14X25 for valley fixed) with 150mm end lap and one corrogation side lap whereever required penetrations and lap in sheet shall be sealed by using proper sealant profile/HDPE fillers shall be provided whereever required to close voids between sheets and fastners etc. as in roof covering/ cladding in straight or curved surface in any height complete all as specified and directed. Note : (i) The colour of sheet for bldg shall be approved by GE. (ii) Sheeting shall be fixed of any height.

S&F plain galvanized, mild steel sheeting 0.63mm thick, in ridges, hips, valley, gutters, drips and straight flashings (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L mild steel rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, grade Fe-410-W and gde-E-250 quality etc complete all as specified and directed.

Cutting holes in brick walls not exc half brick wall in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

Demolition of brick work or stone / boulder masonry including all quoins, arches, pillars, etc. built in cement mortar or cement lime mortar complete all as specified and directed.

Taking down cement plaster any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C-2, using 40 mm graded crushed stone aggregate as in plinth protection laid to slop of 1:12, finished surface even and fair without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6 mm wide joints through out the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three part of fine sand by weight) complete all as specified and directed.

M & L for 25 mm thick cement concrete type B-0, 1:2:4 (using 12.5 mm graded crushed stone aggregate) as in sub floor of floor finishes, finished even and rough complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing rubbish off the premises all as specified and directed.

M&L Screed bed or bedding layer or mortar 15mm layer of mortar in 1:6 for laying floor finishes all as specified and directed.

M&L glazed ceramic colour tiles in vertical surface (450x300x7mm) thick, in etc. set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

M&L glazed ceramic colour digital grooved tiles exterior type in vertical surface (450x300x7mm) thick, in etc. set and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

M&L non skid ceramic tiles 7 to 8 thick (Square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match all as specified and directed.

Taking up or down steel tubing 15mm bore and connections including cleaning for refixing or removing from site as complete all as specified and as directed.

S&F 15mm bore galvanized steel water tubing, medium grade with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from frame) exc 1.5 and n exc 4 Sqm each complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from frame) n exc 1.5 Sqm each complete all as specified and directed.

M&L 2nd class hard wood (SAL) for plain, solid, straight, chowkhat and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F Door closer hydraulically regulated, designation No 3, universal type, aluminum (extruded section body) suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80kg and fixed complete all as specified and directed.

S&F for 35mm thick plain, framed, glazed and skeleton shutters of IInd class HW (SAL), open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part I, section 8, clause 8.24 complete all as specified and directed.

S&F mild steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed, Length of bolt 300 mm complete all as specified and directed.

S&F MS butt hinges100mm long medium weight store enamalled, cold rolled complete all as specified and directed.

S&F 125mm mild steel pressed handles, oval type, stove enamelled black complete all as specified and directed .

S&F 150mm mild steel barrel tower bolts of extruded section and fixed complete all as specified and directed.

M & L for preparation of new or previously untreated wooden surfaces exc. 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F for mild steel work in Collapsible steel gates, top hung, consisting for channel pickets, pivotd flat bars, top and bottom runners brass handles etc as specified, erected in positio and securing runners with holdfasts and brackets complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:6) on concrete/bricks surfaces of wall and finished even and fair without using extra cement complete all as specified and directed.

S&F Cylindrical lock, brass finish SS, entrance computer key complete all as specified and directed by the Engineer-in-Charge.

S&F brass, sliding door bolt 300mm long with sand or die-cast brass hasp staple (bolt type) and fixing bolt with rolled of drawn brass bolts and fixed complete all as specified and directed.

S&F brass butt hinges100mm long body cast brass, with mild steel hing pin bright police and fixed type B-11 complete all as specified and directed.

S&F for 125mm brass handle cast type policed bright complete all as specified and directed.

S&F for 150mm brass barrel tower bolts, with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and directed.

M&L preparation of new or untreated surface of walls and applying two coats of distemper emulsion over one coat of primer including Birla wall care putty in two coats not less than 1mm thick complete all as specified and directed.

Providing & Fixing of Armstrong Mineral Fibre Acoustical Suspended Ceiling System with ANF Angled Tegular edge tiles with Armstrong Prelude 24mm exposed grid. The tiles should have Humidity Resistance (RH) of 95%, NRC 0.5, Light Reflectance ≥85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Colour White, Fire Performance UK Class 0 / Class 1 (BS 476 pt - 6 &7) in module size of 600 x 600 x 15mm, suitable for Green Building application, with Recycled content of 30%. The tile shall be laid on Armstrong Prelude 32 with 24 mm wide T-section flanges colour white having rotary stitching on all T sections i.e. the Main Runner, 1200 mm & 600 mm Cross Tees with a web height of 32mm and a load carrying capacity of 8.5 Kgs/Sqm (as per standard installation layout mentioned below) & pull out strength of minimum 100 Kgs. The T-Sections have a Galvanizing of 90 grams per Sqm and need to be installed with Suspension system of Armstrong make. INSTALLATION: To comprise main runner spaced at 1200mm securely fixed to the structural soffit using Armstrong suspension system (specifications below) at 1200mm maximum. The First/Last Armstrong suspension system at the end of each main runner should not be greater than 450mm from the adjacent wall. Flush fitting 1200mm long cross tees to be interlocked between main runners at 600mm to form 1200 x 600 mm module. Cut cross tees longer than 600mm require independent support. 600 x 600mm module to be formed by fitting 600mm long flush fitting cross tees centrally between the 1200 mm cross tees. Perimeter trim to be Armstrong wall angles of size 3000x19x19mm, secured to walls at 450 mm maximum.

ARMSTRONG SUSPENSION SYSTEM accessories manufactured and supplied by Armstrong World Industries consisting of M6 Anchor Fasteners with hanger hole, pre Straightened Hanger wire of dia – 2.5 mm of 1.80 m length having a tensile strength of 344-413 MPa and a minimum pull strength of 110 kgs. (Adjustable hook clips of 0.7mm thick, galvanized spring steel can also be used for installation purpose as an additional accessory. The adjustable clip also consists of a 4 mm aquiline wire to be used with the main runner). Note :- Installation to be carried out by Armstrong Trained Installation team & Installation should be carried out as per Armstrong recommended procedure.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing & complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing & complete all as specified and directed. Make : Rajshree

S&F Solid PVC Wall Lining consisting of 5mm thick wood grain dark printed PVC molded border sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing & complete all as specified and directed. Make : Rajshree

M & L for 2nd Class HW (SAL) plain framed panelled shutter, 35 mm thick, (two panel 12 mm thick BWP) with lock rail and panel of 9 mm BWP commerfcial ply or 12 mm decorative type glossy finish of any design veneered particle board with commercial veneering on both faces complete all as specified and directed.

S&F stainless steel railing of any height any thickness SS 304L grade polished, No 1 ply coated stainless steel including necessary molding as required, fixed with suitable size stainless steel screws and duly welded as per site requirement complete all as specified and directed. Make : Jindal, Navbharat, SSL, Suncity.

S.K.Enterprises

S S CONSTRUCTION CO

Kapoor Contractor and supplier

Ikrar khan & co.

Zaigham Enterprises

VINOD TRADING CORPORATION