Renewal of Bahraich Huzoorpur Colonaleganj Nawabganj Road SH-155 Km. 1 to 24 with BC in Financial Year 2024-25

Amount

Providing and laying dense graded bituminous macadam (Grade-2) with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder VG- 30 @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Ref. No. 5.04 - 505 (B) complete in all respects. (Including cost of VG-30)

Providing and applying tack coat with bitumen (V.G.-10) using emulsion pressure distributor at the rate of 0.275 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.

Providing and laying bituminous concrete (Grade-2) with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH Ref. No. 5.05 - 507 (B) complete in all respects. (Including Cost of Bitumen VG-30)

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2

Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 Carted Earth 1.00 km.

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.

JAGDISH PRASAD SHUKLA (BID ID -4884540)