Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L₹40.3 LAccepted-AOC PREM NAGAR GALI NO 3 RAJPUTANA SALEMPUR ROORKEE DISTT HARIDWAR UK | ROORKEE | HARIDWAR | UTTARAKHAND | L | Accepted-AOC Acceptance of contract | |
| 2 | L2₹46.5 LRejected-AOC 208 DOON VIHAR RAJPUR ROAD JAKHAN DEHRADUN UK | L2 | Rejected-AOC R | |
| 3 | Rejected-Technical | - | Rejected-Technical No in WLR QE Jun 2023 OF HQ CEBZ |
Tender Value
₹49.8 L
EMD Value
₹99,600
Closing Date
27 Dec 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE IMA Dehradun
GE IMA Dehradun
PROVN OF CERTAIN SPL REPAIR WORK AT IMA DEHRADUN
2023_MES_630299_1
GE/IMA/T-66 of 2023-2024 9369/E6
Open Tender
Support/Maintenance Service
Item Rate
180 days
GE IMA Dehradun
Refer NIT
8 documents required · 8 mandatory
₹500
Yes
GE IMA Dehradun
₹99,600
Yes
3 Feb 2024
29 Nov 2023
29 Dec 2023
30 Nov 2023
27 Dec 2023
13 Dec 2023
Amount
Taking down cement plaster on brick or stone walling built in cement mortar including raking out joints hacking for key scrubbing down et using mechenical means complete as specified
M&L for 12mm thick ( Extranal/Internal ) ready mix sand faced plaster on brick or concerete surfaces including providing & mixing water proofing compound as per manufacturers specification, surface finished even & fair, all complete asspecified and directed Make : ACC (Suraksha) /Ultratech(Readyplast)/Birla (Aerocom)/ Unicrete
M&L Providing and applying putty of 1.00 mm thickness over plastered surfaces on wall /ceiling to prepare the surface even and smooth as directed by Engineer-in-Charge.
Taking down chowkats or frames with shutters (without taking off shutter from frame) area n.exc 1.5 Sqm each complete all as specified and directed.
S&F Factory made single extruded WPC (Wood Polymer Composite ) soild door/ window Ceostory windows & other frame / chowkhat double patam of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Supension Grade) , calcium carbonate and natural fibers (wood powder / rice husk / wheaat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabbricated with miter joints after applying PVC solvent cement and screws with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withrawal strength of 2200 N cum , (Face) & 1100 N (Edge) , minimum compressive srength of 58 N/mm², modules of elasticty 900 N/ mm² and resitance to spread of flame of class A category with property of being termite / borer proof , water / moisture proof and fire retardant. and fixied in position with MS hold fast/ lugs / SS dash fasteners of required dia and length complete as per direction of Engineer-In-Charge.(M.S. hold fast/ lugs or SS dash fasteners shall be paid fo separately ) . Note : For WPC solid door/ window frames , minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable . Variation in profile dimension on plus side shall be accepetable but no extra payment on this account shall be made. Make:- Rajshree/Black Cobra/ Eccocell.
S&F factory made single extruded WPC (wood polymer Composite ) soild decorative type 2 panel door shutter of size 30 mm thick comprising of virgin polymer of K value 58-60 (suspension Grade ), calcium carbonate and natural fiber (wood powder/ rice husk / wheat husk) and non toxic additives ( maximaum toxicity index of 12 for 100 gms ) having minimum density of 650 kg/cum and screw whithrawal strenght of 1800 N (Face ) & 900 N (Edge ) , minimum compressive strength 50 N/mm² , modulus of elasticity 850 N/mm² and resistance to spread of falme of Class A category with property of being termite /borer proof , water/moisture proof and fire retardant . WPC to be laminated with PVC foil of minimum 14 microns thic of approved desing pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel but hinges of required size with necessary full body threaded star headed counter sunk S.S screws., all as per direction of Engneer-In -Charge . ( Note : Stainless steel but hinges and necessary S.S srews shall be paid seprately ) Make:- Make:- Rajshree/Black Cobra/ Eccocell.
S&F 18 to 19 mm thick one side prelaminated colour WPC sheet for cabinet shutter and frame & fixed at site colour as approved by Engr-in - Charge complete all as specified and directed. Make:- Rajshree/Black Cobra/ Eccocell.
S&F Auto closing hinges 35mm of 0 crank ( KH001) or 8 crank (KH-002) openable at 110 digree for cabinet shutter fixed in repair complete all as spfd and directed. Make:- Hexa/ Hettich/ Hafele
S&F Stainless steel handles 125mm size for cabinet shutters fixed in repair complete all as spfd and directed. Make:- Hexa/ Hettich/ Hafele
S & F 100mm butt hinges type C-21,extruded aluminium alloy with galvanised mild steel hinge pin,anodised etc complete all as specified and directed.
S & F 200mm long aluminium anodised barrel tower bolts of extruded section and fixed.
S&F 300mm long stainless steel sliding door bolts ,plate type , stove enamelled black,with bright bolt not less than 12mm with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate.
S & F 150mm size Aluminium handles,cast type,anodised.
Dismantling floor, hearth or wall tiling /kota/udaipur/ granite stone tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the IMA premises all as specified
M & L for 20 mm thick scred bed or bedding layer of cement mortar in 1:6 for laying of flooring complete all as specified and directed.
M&L for non skid ceramic coloured tiles area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm & 7 to 8 mm thick in floor set and jointed in neat cement slurry and pointed in tile grout to match the shade of tiles with & including screed bed or beading layer of morter 15mm thick in cement morter (1:6) for laying floor finishes , complete all as specified and directed.
M&L for coloured glazed designer tiles of size 300x450x6 - 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, all as specified and directed
M&L for Construction of brick soak well 3.30 m dia and 4.50 m deep, exc, in ordinary Soil, Foundation in PCC 1:3:6, wells of Honey combed and solid in M-25 Concrete, including intercepting chamber, screen chamber Brick work in cement mortar 1:4 RCC cover slab in M-25/ RR masonry / Filling with brick bats, including necessary earth work complete all as specified and shown on drgs.
M&L for brick work using sub class "B" brick work straght or curvd on plan exc 6mtr mean radius built in cement mortar 1:4 (old size brick) including demolation of brick work complete all as spfd and directed.
S&F medium grade steel water tubing, 15 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.
S&F medium grade steel water tubing, 20 mm bore galvanised with all fittings and fixed complete to walls or layed in floors including taking down of existing tubing and connections all as specified and directed.
S&F Vitreous China Urinal, Full stall type, 375x390x590mm white (including flushing cistern, Angle cock , flush pipe and waste pipe) incl automatic flushing cirstren incl CP waste cuppling.Cat. No- S4020112 ( Cera)/ Jaquar/ Hindware.
S & F in repair vitreous China wash down water closet pan floor mounted single pice ( cascade) ceramic white including flushing cictren , plastic water closet seat, incl Angle cock , white colour pattren with flat bottom and cover complete all as spfd and directed .Make :- Jaguar barring Cat Pt- NoFLS -WHT-5351SN / Cera Cat ,No. S1013208 / HINDWARE Cat Pt- No- 92098 P-21 incl trap (P or S Type ) / Parryware Cat Pt- No- VERVE 10269 Complete all as specified.
S&F Vitreous china white Table Top Wash hand basin Size not less than 480 x 400 x 150 mm ,one number WHB Mixer Hott and cold , brass CP waste coupling ,32mm dia , PVC waste pipe with connector/ including cutting for ends of breakets or erecting stand fixed in repair complete all as specified and directed Make:- Jaquar/Hindware/Cera
M&L 16 - 18mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms, shelves in cupboard,handwash places and like including necessary cutting and grooving to walls and making good by pointing in cement mortar (1:2) using admixture of pigment to match with shade of granite over and including cement screed bed Cement Mortar (1:6) 15 mm thick colour of granite as approved all as specified and directed by Engr-in-Charge.
M&L for Granite stone any decripition providing edges moulding to 16-18mm thick stone of counters vanities etc . Including machine polishing to edge to give high gloss finish etc .
M&L for PCC 1:3:6 type C-1 (using 20mm graded crushed stone aggregate) as in bed blocks etc for embededding hold fasts complete all as spfd and directed.
S & F, factory made precast reinforced cement concrete M 30, thickness 60mm manhole cover slabs with 10mm TMT bar reinforcement, moulds, hooks included painting etc complete all as specified and directed. Make: Tulip/ Ferrocon/ Sagar tiles.
S & F in repairs 110mm dia PVC (SWR) sanitary short connection socket to fit WC outlet, complete all as specified and directed by Engineer-in-charge.
S & F 3 mm thick sheet glass ordinary quality glazing in square nexc. 0.5 Sqm in each pane fixed with wooden moulding all as spd and directed.
S&F PVC connection , reinforced 450mm long 15mm in size with brass check nut and PVC washers at both ends complete
S&F 15mm Angle stop valves, fancy type chromium plated, screwed down, high pressure with crutch or butter fly handle screwed at two right angles ends for both iron pipe or for unions and fixed in repairs . Make:- Cera/ Jaquar/ Hindware.
S&F Bib tap cast copper alloy , chromium plated suitable for 15mm bore iron pipe with long body fancy type with wall flange complete fixed in repairs. Make:- Jaquar/ Cera/ Hindware.
S&F Ist class teak wood moulding as exc. 6 & n exc 13 sqcm in cornices picture rails and the like complete all as specified and directed.
S&F brass chromimum plated Towel ring fixed with and including Chromium plated brasss screws and wooden / plastic cleats complete fixed in repairs complete all as specified Make :- Jaquar /hindware/ cera
S&F Brass chhromium plated tubular Towel Rack with Lower Hanger (Stainless Steel) with hook fixed in repair Make:- Jaquar /hindware/ cera
S&F Health faucet (SS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and SS wall hook including making connections and fixed in position complete in all respect as specified. Make:- Jaquar /hindware/ cera
S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed." all as specified and directed fixed in repair Make :- Jaquar /hindware/ cera
S&F Soap dish stainless steel chromium plated fixed in repair with brass screws and rawl plug complete all as specified Make :- Jaquar /hindware/ cera
S & F in repairs for 0.75 mtr X 0.90 mtr framelss bevelled edge looking mirror 5.0mm thick fixed with plugs with chromium plated brass screw and cup washer complete all as specified.
S&F 4 mm thick E-board false ceiling (Classic) including galvanised colour coated snap grid frame for false ceiling, size of grid 605 X 605 mm fixed with 1.6 mm dia GI wire suspenders one end tied to roof members and other end connected to main tee of grid framework by means of 4mm dia adjustable "J" hook consisting of two Nos washers and two nuts at 1.2 mtr centres all as specified and as directed by Engineer-in charge (size of main tee 38 mmX25 mmX 1.4 mm, cross tee 38 mm X 25 mm X 1.4 mm angle along walls 38 mm X 25 mm X 2.0 mm) and two coats of oil bound emulsion complete all as specified and directed including dismantling boarding any description fixed in any position with nails.
S&F MS angle/TEE/Hollow/tubular section as in main and cross beams,hips,and jack rafter, purlins where connected to common rafters and etc. all as directed by engr- incharge confoming to Fe-410- W(Gde- E-250) quality- B.
S&F pre-painted galvalume aluminium zinc coating tile profile corrugated steeel sheet 0.50mm thick any colour having tensile strength of 550 Mpa and 150 GSM as in roof covering/cladding to wall fixed with self tapping screws as specified. Incl. dismantling of old AC/CGI/ridges cement sheet all as specified. Make:- Tata Blue Scope/ JSW Coloron+/ Charminar
S&F PVC (SWR) vent cowl 75mm bore in repairs complete all as specified and directed.
M & L PVC (SWR) floor trap plain with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.
S & F 110mm bore (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floor in repair complete all as specified.
Demolition of brick work/ stone masonay built in cement mortar including all quoins jamb pillars etc.
Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masomy apron using chemical emulsion @ 2.25 litres per linear mtr including drilling and plugging holes etc. in apron.
M & L for factory made chequered polished cement tiles heavy duty, 30CM X 30CM X 22 mm thick, set, jointed in neat cement slurry and pointed in grout to match the floor complete all as specified. & directed, including screed bed or bedding layer or mortar 15 mm thick in cement mortar 1:6 complete all as specified and directed.
M&L for Prepration of new steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of red oxide primer complete all as spfd and directed.
Supply installation testing and commissioning of Centrifugal type Monoblock pump set suitable for 415 V, 3 phase system having capacity 15 HP, 1450 RPM, foot mounted IE2 motor mounted on a base frame total head 20 meter discharge 35 LPS, Suction and Discharge 100mm x 100mm including all fixing arrangement like cutting/welding/bending/drilling of pipe, fixing of tee/elbow/bend etc and providing angle iron base for pump set of suitable size including PCC foundation complete all as specified and directed by Engr-In-Charge. Make: KSB/Kirloskar/Crompton
Supply installation testing and commissioning of Centrifugal type Monoblock pump set suitable for 415 V, 3 phase system having capacity 7.5 HP, 1500 RPM, foot mounted IE2 motor mounted on a base frame total head 12 meter discharge 27 LPS, Suction and Discharge 100mm x 100mm including all fixing arrangement like cutting/welding/bending/drilling of pipe, fixing of tee/elbow/bend etc and providing angle iron base for pump set of suitable size including PCC foundation complete all as specified and directed by Engr-In-Charge. Make: KSB/Kirloskar/Crompton.
M&L for PCC 1:3:6 type C1 (using 20 mm graded granite stone aggregate) as in coping/foundation including necessary form work complete all as specified and directed.
Supply, laying, jointing, testing and commissioning of MS ERW pipe 100 mm dia having wall thickness 5.2 mm including necessary jointing materials such as nut, bolts, washers, packings etc and cutting,welding, bending , drilling holes for bolts, in any shape or size as indicated or directed by Engineer-in-Charge.
M&L for Silica Quartz sand with pebbles of multi grade for sand filter as per the existing by size wise and layer wise after taking out the old sand complete all as specified and as directed.
S&F for CI foot valves flanged type of 100 mm bore, cast iron IS 210 FG 260 body, nitrile rubber coated ball, L.T. bronze IS 318 grade seat ring ISI marked (flange drilling) Make: Normex/ IVC/ Zoloto
M&L for MS fitting/specials suitable for 80/100 mm pipes such as bends, , tappers, etc any type and angle and straight connected pieces any type joint all flange ends including necessary cutting,welding, bending , drilling holes for bolts, in any shape or size as indicated or directed including necessary jointing materials such as nut, bolts, washers, packings and welding including dismantling existing fittings of any description and testing for leekage etc to the entire satisfaction of Engineer-in-Charge.
Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 Sq mm 4 core complete all as specified. Make:- Havells/ SCI/ GeMscab/ Grandlay
Trolly mounted self priming suction sweeper copper wound electric motor 7.5 HP, 415 Volt, including 2' fit long sweeper head complete with spring loaded nylon brush (Salaria Swimming Pool)
S & F testing and commisioning of DOL Starter (heavy duty) with single phase preventer suitable for submersible pumpset 7.5 HP 3 phase 415 volt,50 Hz Make:- L&T/ Havells/ Crompton
M& L for copper conductor cable , multi stranded , flat/round, water proof cable of 6 Sqmm 3 core complete all as specified and as directed.
S&F PVC spiral hose pipe 50 mm external dia floating type including 02 Nos male connectors, nipples, clamps complete for suction sweeper
Supply and fixing of Hot dip Galvanised (450MM width) wire mesh cable trays, manufactured with a longitudinal 'T- welded' safety edge.Trays shall be constructed with 50 X 100 mm mesh configuration. All Accessories including couplers (CE25+CE30+BTRCC screw-based combination system or EDRN fast coupling) and mounting accessories (Mechanically tested & supplied by cable tray manufacturer must be used) are required of same finish as per site requirement.Trays should comply to standard EN ISO 14 61.The deflection of cable tray must be no more than 1/200th of the distance between two supports and tested in accordance with the standard IEC 61537. Wire mesh cable trays must be designed with an optimum span of 1.5 m, taking into account the maximum carrying capacity authorised by the manufacturer. Assemblies with specific fire resistant properties must have an E30-E90 certificate. Supports, brackets or hangers designed, mechanically tested and supplied by the wire cable tray manufacturer to be used and all as specified and directed.Make Legrand catpart no- CF54/450GC/ L&T/ Havells/ C&S
Supply & installation with complete testing of Wireless Water level monitoring device, Operating on single phase, display level in meter/cm, accuracy of sensor is lcm, and electromechanically sensor is installed on tank and connect with transmitter system via cable. Transmitter installed at suitable location, transmitter send data to server via internet and show level in android app. capacity of measure level is 7 meter of water. all system fit in 18 gauge sheet box. app will show water level of tank, tank name, capacity of tank, over flow value, last reading update time etc & making device functional with providing SIM Card with “1 year recharge including necessary control wire, power cable, connector etc of suitable size required at site to commission the device. Model WWLM Brand : SECO/Rotex”.
Supply install in repair and commissioning of Granular O2 hlorination dosing pump/Plant of high pressure dosin pump having output of 2 U.S. GPD to 40 Us GPD and adjustable high pressure of up to 100 PSI (7 kg/cm2) or more, power input 230 V, 50 Hz self priming with nonmetalic with connecting nuts, ferrules and with a accessories including lead, tubing connection injection Check valves complete all as specified and directed. Preparation tank, (300 tr), (i) water inlet line, (ii) Outlet with strainer, (iii) Drai (iv) Overflow, (v) Conical bottom for sludge deposition, (vi) Pot hole with ove (viilevel gauge, (viii) Inspection port, (ix) Agitator 120 watt 900 RPM single phas mounted with plastic shaft and impeller. Service Tank (100 Itr), (i) Water line inlet, (ii) Dosing pump inlet arrangement, (i Drain, (iv) Overflow, (v) Level gauge (vi) Inspection port, |Make-Pearl, filter/Briozing/Declibec/Aqufit
S&F sluice valve cast iron body, double flanged and drilled, 150 mm bore as per IS- 14846, class PN-1.6, long body type with SS spindle etc with all fittings, jointing materials etc including taking down old unserviceable sluice valve complete all as specified. Make:- Kirloskar/ Leader/ Zoloto
S&F sluice valve cast iron body, double flanged and drilled, 100 mm bore as per IS- 14846, class PN-1.6, long body type with SS spindle etc with all fittings, jointing materials etc including taking down old unserviceable sluice valve complete all as specified. Make:- Kirloskar/ Leader/ Zoloto.
M&L for taking down of existing unserviceable pressure gauge from rising main, supply and fixing pressure gauge as pressure range upto 7 Kg/Sqcm, existing in size on rising main, testing complete all as directed by Engineer-in-Charge.
M&L earthing with galvanized iron earth plate of size 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized earth lead iron strip 32 x 6mm dia by means of volts, nuts, check nuts and washers of galvanized iron or steel including excavation/earth work in any type of soil, returning filling in removal of surplus soil, to a distance upto 50 mtr PCC 1 : 3 : 6 type C-1 earth pit, RCC cover with suitable handle for lifting, water pipe, funnel etc complete all as shown in electrical plate No 5 of SSR part-I all as specified including testing on completion.
M/s caspur construction company
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .