Construction of Passenger Shed at Aatipora Block Kunzer.

Engagement of manual labours for general site clearance by way of removal of roots, debris and levelling of ground surface complete job etc.,

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres: All kinds of soil.

Providing and laying of stone solling duly hand packed including ramming, dressing and watering and all carriages complete job.

Providing and laying in position cement concrete ofspecified grade excluding the cost of centering and shuttering. All work up to plinth level: 1:4:8 (1 cement:4 coarse sand: 8 graded stone aggregate 40mm nominal) crushed.

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) complete job etc.

Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns etc. for mass concrete.

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.: Welded.

Providing and fixing 10 mm thick UV-stabilized multiwall polycarbonate roofing sheet of approved make, colour and shade over the existing MS structural steel framework, including cutting to required size, cold bending to the required profile, fixing with aluminium glazing profiles, EPDM/neoprene rubber gaskets, aluminium end closures, stainless steel self-drilling screws with EPDM washers, weatherproof silicone sealant, protective tapes, all necessary fittings and accessories, carriage, loading, unloading, handling, labour, scaffolding, wastage and all incidental charges, complete in all respects as per the approved drawings and the directions of the Engineer-in-Charge.

Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture.

Providing, printing, supplying and fixing premium quality self-adhesive outdoor grade vinyl graphics of approved design, colour and artwork over prepared MS sheet advertisement panels, including digital eco-solvent/UV printing, lamination with UV-resistant transparent protective film, surface cleaning, alignment, cutting to required size, application without wrinkles or air bubbles, finishing, all adhesives, labour, loading, unloading, carriage and all incidental charges, complete in all respects as per the approved design and directions of the Engineer-in-Charge.