15th Finance Commission Grant

Providing and applying synthetic plaster putty or plaster of paris puttyor lime punning of average 1 to 2 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying knifing paste filler by putty knife / muslin pad, air dry for 2 - 3 hrs sand with 180 and 320 No,emery paper for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work for Internal walls.

Cost and supply of RCC jallis including cost and conveyance of all materials and all labour charges etc., complete

Flooring with Double charged / multi charged stain free full body porcelain vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, for finished item of work, but excluding the cost of conveyance of all materials.

Providing skirting to internal walls to 15 cm height/risers of steps with Double charged / multi charged stain free full body porcelain vitrified tiles length equal to flooring stones, set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like stone, cement, sand and water etc., complete excluding seigniorage charges, etc., complete for finished item of work

Flooring with Non Skid Ceramic tiles, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost and conveyance of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, etc., complete for finished item of work

Dadooing to walls with coloured glazed tiles 1st. quality of any size of brand as approved by Engineer - in - charge and set over a base coat of CM (1:5), 12mm thick and neat cement paste at the rate of 3.3 Kg/Sqmt. and jointed with white cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, fine sand (screened), water, tiles, etc. to site, sales and other taxes on all materials, C921 such as mixing of cement mortar, laying in position, curing, lift charges etc., complete excluding seigniorage charges for finished item of work (APSS No.701 & 707)

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for interior walls

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Supply and fixing of Flush Door shutter of size 1.05 x 2.10mt with solid bond wood block board type with commercial ply on both faces.: 30 mmthick with frame made of well seasoned sal wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges and fixers as per specifications (APSS NO.1001 & 1002)

Supply and fixing of Flush Door shutter of size 0.90 x 2.10mt with solid bond wood block board type with commercial ply on both faces.: 30 mmthick with frame made of well seasoned sal wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges and fixers as per specifications (APSS NO.1001 & 1002)

Supply and fixing of Flush Door shutter of size 0.75 x 2.10mt with solid bond wood block board type with commercial ply on both faces.: 30 mmthick with frame made of well seasoned sal wood scantlings of size 100 x 75mm including cost and conveyance of all materials and labour charges and fixers as per specifications (APSS NO.1001 & 1002)

Providing and fixing factory made polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 10 mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Supply and fixing of 30mm thick Solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19gauge thickness and size of 19mm x 19mm for stiles, &15mm x 15mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture.M.S. frame shall be covered with 5mm thick heat mouldedPVC „C‟ channel of size 30 x 50mm forming stiles, and 5mmthick, 75mm wide PVC sheets for top rail, lock rail &bottomrail on either side, and 10mm (5mm x 2) thick, 20mm widecross PVC sheet as gap insert for top rail & bottom rail.Panelling of 5mm thick PVC sheet to be fitted in the M.S.frame welded / sealed to the stiles & rails with 30mm wide x5mm thick PVC sheet beading on either side, and joinedtogether with solvent cement adhesive etc. An additional5mm thick PVC strip of 20mm width is to be stuck on theinterior side of the „C‟ Channel using PVC solvent adhesive.Complete as per direction of Engineer-in-charge,manufacturer‟s specification & drawing for finished item ofwork .

Providing and fixing factory made UPVC white colour sliding glazed windowupto 1.50 m in height dimension comprising of uPVC multi-chamberedframe with in-built roller track and sash extruded profiles duly reinforcedwith 1.60 ± 0.2 mm thick galvanized mild steel section made from rollforming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (whitepowder coated) touch locks with hook, zinc alloy body with single nylonrollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mmsize for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at allcorners, including drilling of holes for fixing hardware's and drainage ofwater etc. After fixing frame the gap between frame and adjacent finishedwall shall be filled with weather proof silicon sealent over backer rod ofrequired size and of approved quality, all complete as per approved drawing& direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent . Note: For uPVC frame and sash extruded profiles minus 5% tolerancein dimension i.e. in depth & width of profile shall be acceptable.Variation in profile dimension in higher side shall be accepted. But no extra payment on this account shall be made. Three track three panels sliding window with fly proof SSwire mesh (Two nos. glazed & one no. wire mesh panels)made of (small series) frame 92 x 44 mm & sash 32 x 60mmboth having wall thickness of 1.9 ± 0.2 mm and singleglazingbead of appropriate dimension (Area of window upto1.75 sqm

Painting to new wood work over a primary coat and painting two coats of synthetic enamel paint Grade-I of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc. complete (APSS No.1200, 1207 & 1211) in all floors

Painting to New Iron work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Red oxide with Luppam finishing after thoroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, sales & other taxes, all operational, incidental and labour charges etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212).in All Floors

Electrical Items: Supply and Fixing of 25mm dia 1.80mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

Supply and Fixing of 25mm dia 1.8mm thick P.V.C. pipe (ISI MARK) concealed in wall with all required accessories including masonary work for light, fan and separate plug point with well seasoned TW box including all labour charges etc., complete. Make : Sudhakar/ Maco Plast / Modi

Supply and run of 1 of 14/0.3mm (1.0 Sqmm) FR / FRLS PVC insulated 1100V grade as per IS:694/1990 specification for copper cable in existing pipe for earth continuity including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.

Supplying & run of 2 of 2.5 Sqmm 36/0.3mmFR PVC insulated flexible copper cable in Existing pipe for mains including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge

Supply and 2 runs of 4.0 sq mm 56 / 0.3mm PVC insulated flexible copper cable and 1 run of 2.5 sq.mm flexible PVC insulated copper cable for earthing in the existing conduit pipe for power point including labour charges for 16A sockets. .

Supply and run of 4 of 56/0.3mm (4 Sq.mm) FR P.V.C. insulated flexible copper cable in existing pipe for mains inlcuding all labour charges etc., complete.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., comp Make : Finolex / RR Kabel / KEI

Supply and fixing of 6A 3 pin wall plug socket with 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.Makes : Anchor Penta cherry/ Gold Medal Olive /Million Zoom

Supply and Fixing of 20A 3pin and 6A 3pin plug socket with and 16A switch control duly recessed in wall with MS switch deep box of 6" x8" x2 1/2" size covered with hylam sheet including earth connections and all labour charges etc., complete. Plug Socket.

Supply of Mini Modular Stepped type Electronic Regulator with Cover Frame for Ceiling fans 900/1200/1400mm sweep complete erected on existing board including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge..

Supply of 900 mm (36") / 1200 mm (48") / 1400 mm (56") sweep 230V, A.C 50 Hz.Ceiling fan with 3 Blades and double ball bearings with all standard accessories.

Supply and fixing of 20-24W, not less than 1100mm length LED batten light with extruded aluminum housing and polycarbonate cover, input voltage AC 220 - 260 Volts, with high power LEDs, having System Efficacy of >=100 lumens/watt , PF>0.9, Surge protection: 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI>70, etc., complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I.

Supply and fixing of batten holder / slanting holder in lieu of ceiling rose of light point complete with all connections and all labour charges with 40W bulb (for new installation).

Supply of 1x40W weatherproof flourescent streetlight fitting comprising canopy of sheet Aluminium in stove enamel finish with copper / VPIT ballast, capacitor, tube and starter etc., complete.

Fixing of 40W street light luminaire to the wall with 1.0 Mtr., 25mm dia GI pipe bracket and anti tilting MS flat etc., including giving connections and labour charges etc., complete.

Supply and fixing of 3-Phase Meter Board with 18" x 30" size Peta Board with 3 No. of 100A, 415 V Fuse Unit and 32A Standard make including giving internal connections including cost of all materials, all taxes, conveyance to site and all labour charges for all operations etc., complete as directed by Engineer in Charge.

Providing independent earthling by excavating a trench to a depth of 2.1 M in all soils, as per size specified in the Data, using 40mm dia 'B' class GI pipe of 2.5 Mtrs length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of Salt and Charcoal in layers and all labour charges etc., complete for small quarters.

Supply and fixing SPN Distribution board with IP-20 protection suitable for single phase Earth Leakage Circute Braker (ELCB) / Residual Current Circute Braker (RCCB) / Double Pole (DP) Isolator as incomer and 10kA SP MCBs as out going including internal connections and labour charges for surface / flush mounting etc., complete.,

Supply and Run of 2 of 2.5 Sq.mm WPSC (Whether Proof Single Core) Aluminium cable along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including labour charges etc., complete for service mains.

Water & Sanitation: Supply and Fixing of CPVC Pipe ( OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound 34.90 mm OD CVPC Pipe Toilet -1,2

Supply and Fixing of CPVC Pipe ( OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound 15.90mm dia Toilet -1,2

Supply and Fixing of CPVC Pipe ( OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound 75mm dia PCV Pipe

Supply and Fixing of CPVC Pipe ( OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound 110mm dia PCV Pipe

Constructing 457.2mm x 457.2mm ( 1'-6" x 1'-6") brick in CM (1:6) prop. Masonry inspection chamber upto 914.4mm (3'-0") and fitted with light weight 457.2mm x 457.2mm ( 1'-6" x 1'-6") C.I. frame and cover of 20Kg. including cost and conveyance of all materials to site, all labour charges

Cost and Supply & fixing of 1200mm dia RCC Well Rings and Covers for Septic tank

Cost and Supply & fixing of 1200mm dia RCC Well Rings and Covers for Septic tank Well Rings Cover slab

Supplying & Fixing Indian makeFlat Back Wash Hand Basin1st quality conforming to IS:2556-Part-4:1972 withwaste fittings like rubber plug, chain,32 mm nominalC.P. Fitting with parallel pipe thread conforming to IS:2963- sizebrackets including wooden block: 660 x 460 mm - Single C.P. Pillar cock

S&F 12.7 mm dia NP pillar cock heavy duty Ist quality Indian make

Supplying & Fixing angle stop cock 12.7 mm dia first quality Indian Make heavy duty Seiko/ Senior/ Nice or equivalent

Supply&fixing31.75mmdiaPVCflexiblewastepipeof 914.4mmlengthof Istquality

Supplying & Fixing of CP Long body bib cock fancy type deluxe heavy duty 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent including cost and conveyance of all materials to site, all labour charges complete for finished item of work for All Floors

Supplying and Fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'P' trap including cost & conveyance of all material to work site, all labour charges for all operations for fixing etc., complete for finished item of work.

S & F 12.7 mm brass stop cock Indian make heavy duty

Supply&fixingof PVC low level systemwithinternalcomponents &short bend:10litrescapacityDualFlush

S &F12.7x 88.9 CPfancy shower incluidng cost and conveyance of all materials and all labour charges etc., complete

Providing & placing on Terrace polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and overflow pipes with all fittings including supply and fixing of 76.20mm dia PVC elbow 1st quality and 38.10mm dia PVC waste pipe outlet including coat and conveyance of all materials all labour charges etc. complete for finished item of work but excluding VAT.

Cost and Supply and fixing of Casing pipe 180mm dia PVC 6Kg/sq.cm inclduong cost and conveyance of all materials and all labour charges etc., completed

Supply and errcting,ISI mark of 1 H.P 13 stages single phase ISI Submerseeeible motor Pumpset suitable for 4" borewell Makes kriloskar/Crompton/CRI/L&T/Texma/Varsha with high quality wear resistance and dynamically balanced bronze imperres

Supply and Fixing of 50mm dia Nominal bore GI Pipe Medium Grade properties and weight as per IS 1239 ISI mark with G I Fittings including the cost of pipe,fittings and labour charges etc., completed

Supply and Fixing of CPVC Pipe (22.20mm OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound

Supply and Fixing of CPVC Pipe (28.60 mm OD pipe-SDR 13.5) andd fittings to meet the requirement of ASTM-D 2846 and are produced in CTC(Copper Tube Size 1/2" ton 2" SDR 11 and SDR 13.5 pipes are made from idential CPVC compound

PART-B(COMPOUND WALL) Augoring and boring of holes in site and under reaming for Bored cast-in-situ R.C.C. Piles for building foundations in loamy, clayey soils like Black cotton soils and ordinary soils with augoring and boring equipment as per IS 2911 - 1980 as per approved designs including all operations, incidental, labour charges, hire charges of machinery, augur bore drill and shell equipment, etc, complete for all depths and for finished item of work for piles of different diameter , inclding VRCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges , seigniorage charges for finished item of work, including centering, shuttering.

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering for Plinth Beams

RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges ,Seigniorage charges for finished item of work, including centering, shuttering for Columns

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, seiniorage charges, scaffolding and curing etc., cpomplete with a compresive strength not lessthan 50 kg/sqm for walls for Superstructure Walls

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for superstructure -10Sqm

Painting to New walls with two coats of Plastic Emulsion paint of superior quality of approved brand and shade over base coat of cement primer grade -I making three coats in all to give an even shade after thoroughly brushing the surface to remove all loose powdered materials, including cost and conveyance of all materials, including cost and conveyance of all materials, cost of brushes, water to site, etc., sales & other taxes, all operational, incidental and labour charges such as scaffolding charges, lift charges, curing etc., complete for finished item of work in all floors for Walls.(APSS No. 911) in All Floors for exterior walls

Providing High Yield Strength Deformed (HYSD)/ Thermo Machanically Treated (TMT) / Mild Steel (MS) steel bars (Fe 415 / Fe 500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightering, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and typing and lap -splicing with binding wire of 18 SWG, forming grillls for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps , couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidnetal, operaitonal, labour charges such as cutting , bending, placing in position, typing inlcuding sales and other taxes on all materials etc., complete for finished item of work in all floors (APSS No.126)

Cost and supply of MS Grills including cost and conveyance to work spot and fabrication charges of steel like cutting rods, welding grills placing in position etc., complete.