Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹20.2 LAccepted-AOC PURULIA CHOWK BAZAR | COOCHBEHAR | COOCHBEHAR | WEST BENGAL | L1 | Accepted-AOC lowest | |
| 2 | L2₹20.4 L+₹22,892.09 (1.13%)Rejected-Finance NAMOPARA PURULIA | PURULIA | PURULIA | WEST BENGAL | 723101 | L2 | Rejected-Finance 2nd lowest | |
| 3 | L3₹20.5 L+₹35,534.71 (1.76%)Rejected-Finance | L3 | Rejected-Finance 3rd lowest |
Tender Value
Refer Docs
EMD Value
₹46,000
Closing Date
20 Mar 2024, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
The Executive Engineer, PMD,PHE.Dte
Office of the Executive Engineer Purulia Mechanical Division,PHE.Dte Ranchi Road,Purulia.
Supply, delivery and installation of Centrifugal pumping machinery with other allied work at River site of Augmentation of Sutaboi water supply scheme under Purulia Mechanical Division PHE Dte.
2024_PHED_674701_18
21/ EE/PMD/PHED OF 2023-2024
Open Tender
MECHANICAL
Item Rate
120 days
Purulia
Please refer Tender documents.
5 documents required · 5 mandatory
₹46,000
Yes
18 Sept 2024
29 Feb 2024
22 Mar 2024
29 Feb 2024
20 Mar 2024
29 Feb 2024
Amount
Supply, delivery at site and storage of horizontal multistage centrifugal pump with common base plate for pump and motor, flexible coupling, coupling guard foundation bolts etc. as per IS :9137 & following specification. Pump efficiency should be greater than 70 % and RPM (Syn) should not be more than 1500. Casing -CI, Impeller-BR LTB2, Shaft-SS410, shaft sleev- SS410, Wear Ring : BR LTB2, Suction- flooded type, Suction/delivery nozzle size: 80mm/65mm. Capacity : 45 M³/Hr. Generated Head : 70 MWC. (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department)
Supply, delivery at site and storage of horizontal foot mounted TEFC squirrel cage induction motor of IE4 class suitable for above pump sets having adequate margin on BKW over the pump BKW and as per following specification. Power Supply: 415V+/-10%, 50HZ ± 6%, 3 Phase, Duty cycle-S1, Insulation- class F, IP55, Temp rise limited to class: B, Motor ( IS 325) should be efficiency class: IE4 . Motor power should be 15%-20% over the pump HP at duty point. Ambient temp: 50°C, Speed: 1500 rpm as sync, Method of Stating: Star delta stating, Motor rating- 15 KW. (TC, GC & Curve Chart and MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department)
Supply, delivery at site and storage of following valves & pipes as per specification: (TC & MOC issued by manufacturer are to be submitted at the time of delivery) (Mateials should be supplied after taking approval from department) Cast iron double flanged Non- Rising Spindle Sluice Valve generally confirming to IS 14846 having body door /dome/Bonnet and cover of cast Iron Gr FG 260, Spindle of IS 6603, Gr-12 cr-13, spindle nut & seat rings are of Gunmetal as per IS:318 LTB 2. Flanges flat faced and drilled to IS:1538 Part IV & VI, Valves are suitable for maximum working pressure of 10/16 kg/sqcm (seat test) and body tested to 15/24 kg/sqcm 350 NB and above valves should be provided with enclosed gear box and antifriction device for ease of operation. All the valves should be tested by closed end method only. PN 1.0 ratings. i) DN 200 mm (for Suction line)
MS dismantling joints with Rubber Compression Ring and adjustable follower flanged complete assembled unit with galvanized stud and nuts. PN 1.0 ratings. ii) DN 200 mm (for Suction line)
Supply, delivery at site and storage of MSERW Pipes as p er IS: 1239 (part I & II) for suction, delivery and common header lines ( PN 1.0 rating). iii) DN 200 mm (for Suction line) 5.0 mm thickness.
Supply, delivery at site and storage of bourdon type Gauges (Glycerine filled) with 150 mm dia cast aluminium dial with SS internal Siphon Tubes, DN 15 mm GI Impulse line with Three Way Cock etc. Pressure Gauge ( 0 - 10 kg / sq.cm )
Compound Gauge ( + 1KSCG to -1 KSCG )
Supply and delivery of 1.1KV grade 25 sq.mm 3 core XLPE insulated Aluminium armoured cable conforming to IS 7098 (Part-I) 1988, with upto date amendments. (Make: Approved Vendor list of PHED.)
Supply, delivery at site and storage of safety equipment like 3 kgs. fire extinguishers IS 7285: 1 nos, fire buckets IS 2546: 2 nos, rubber mats IS 15652, shock treatment chart (Bangali) and first aid box as per satisfaction of EIC.
Installation of pump motor,valves, DM joint, Enlarger/Reducer and specials, gauges, including supply of all erection items, Proper allingment of high lift pumping machinery, pipe support, valve support, fabrication of suction line , delivery line and common delivery header, laying/drawing of power cables through cable tray (with necessary jointing materials, brass compensation glands), including earthing arrangement for all pumping machinery, electrical installation & switches etc. as required for completion of work as per relevant IE Rules and Hydraulic Standards with the entire satisfaction of EIC in compliance with approved departmental drawing and specification including labour charges and hire charges of Generator, welding set, fuel, lubricants etc. required for completion of work.
Sluice valve chamber with C.I. heavy cover with locking arrangement, (weight not less than 25 kg) (size of chamber 450 mm X 600 mm inside upto 900 mm depth) 250 mm thick cement brick walls (6:1), 150 mm thick cement concrete (6:3:1) bed with stone chips, 20 mm thick cement plaster (6:1) for inside wall and 15 mm thick cement plaster (4:1) for outer walls including rounding corners.
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil.
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By ISI-Medium GI pipe
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required.
Extra for providing masonery enclosure on the top of the earth electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep (below Ground level) complete with cemented brick work(1:6) of 25 cm width duly plastered with cement morter (inside) CI hinged inspection cover of size 36.56 cm x 35.56 cm with locking arrangement, GI reducer including drilling of 46 nos. 12 mm dia holes on the GI pipe.
Painting of the installation (viz. pumps, valves, pipe lines etc. by two coats of epoxy paint (colour to be decided by EIC) over a coat of primer as per direction of EIC.
Commissioning of the entire installation i.e. high lift pumps, panels etc,. as per direction and upto satisfaction of EIC.
Add GST @ 18%
Add CESS @ 1%
COMBINE ENTERPRISES
TAPAN KUMAR DEY
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .