Construction of various Anganwadi Building group B of Valsad district under DGVCL CSR Initiative 2025-26

ADDL. CHIEF ENGINEER (P)

DAKSHIN GUJARAT VIJ COMPANY LIMITED

“URJA SADAN” CORPORATE OFFICE, NEAR KAPODARA CHAR RASTA,NANA

VARACHHA ROAD, SURAT – 395

DAKSHIN GUJARAT VIJ COMPANY LIMITED

NEAR KAPODRA CHAR RASTA, NANA VARACHHA ROAD, SURAT-395

-: SCHEDULE –A :-

Name of Work: “Construction of various Anganwadi Building group B of Valsad

district under DGVCL CSR Initiative 2025-26”.

Note:- The contractor should make their own arrangement for loading, unloading and cart-

ing of the above mentioned material

CONDITIONS FOR MATERIALS SUPPLIED BY THE CONTRACTOR

1 The above material shall be brought by the contractor to meet with the

requirement of the contract.

2 Cement & steel will be allowed to use in the contract and for allied connected

works with the prior approval of the Engineer - In -Charge.

3 The Steel material will be brought by the contractor on weight basis .However

measurement for the work done will be on Linear measurement basis by

calculating weight as per the sectional measurement as per IS.

4 Wastage steel scrap will not be counted left out after the completion of the work.

5 The contractor will be allowed to take away the wastage of steel scrap after

completion of work with permission in writing from E.I.C.

6 Cement shall be counted 20 bags to one M.T.

7 Empty cement bags is not to be returned to the DGVCL and contractor will be

allowed to take away with permission in writing from Engineer -In -Charge.

8 Necessary Electrical power connection shall be given on chargeable basis at one

Addl. Chief Engineer (P),

Sign. Of Contractor

(With rubber stamp/seal of the company)

DAKSHIN GUJARAT VIJ COMPANY LIMITED

SPECIAL CONDITIONS FOR USE OF CEMENT IN WORK:

1. The rates in Schedule-‘B’ are inclusive of cement cost. Contractor has to purchase fresh

43 / 53 grade cement confirming to as per IS 8112 -1991 or PPC (Fly ash Based)

confirming to IS-1489 (Part-I) of approved brand by DGVCL.

2. Contractor has to construct pucca godown at site of work so that cement bags be

properly preserved to avoid damage due to any kind of water. DGVCL will in no way

responsible for any damage, loss or theft of the same.

3. Contractor has to bring sufficient quantities of cement bags and at no time less than

(two hundred) bags to maintain progress of work. The work should not suffer for want

4. Cement should give the required strength of cement concrete.

5. To bring sufficient & timely cement at site is full responsibility of contractor. Nothing

extra will be paid on account of any reason to maintain progress of works and to

complete the works in schedule time.

6. Contractor has to submit material A/c consumption of cement used with every bill. In

case of not submitting the same, bill will not be passed. Party has to submit the copy of

cement / purchase bill along with each RA Bill/Final Bill.

7. Empty cement bags are not to be returned to the corporation and contractor will be

allowed to take away with permission of in writing from Engineer-in-charge.

8. Contractor is fully responsible for safety of cement at site; nothing will be paid extra on

account of safety.

9. If DGVCL’s authorized representative wants to check cement stock at site. Contractor

has to allow for the same at any time.

10. Contractor has to maintain day to day cement consumption balance account at site.

11. As far as possible, contractor has to maintain supply of cement of only one brand &

grade throughout the work and on account of closer/shortage of approved brand,

cement of other brand in accordance of condition No. (1) will be allowed by Engineer

12. Contractor will be allowed to carry out work only after physical verification of cement

brought at site.

13. Contractor shall have to use PPC (Fly Ash based) preferably as per the relevant I.S.

14. The cement consumption will be considered as per the standardized norms of state

P.W.D. and accordingly the required quantity of cement shall have to be brought by the

contractor and has to use the cement accordingly. Contractor should not use less than

the prescribed quantities of cement even in the case of mix design recommends lower

quantity. Nothing will be paid extra for over consumption.

Signature Of Contractor Addl. Chief Engineer (P),

Approved name of Manufacturers: Allowing to use steel / cement being supplied by

contractors in civil works

The list of adopting cement and steel of companies / suppliers / manufacturers are shown be-

Following companies / brands are approved for providing and supplying the cement and steel

to be used in concerned tender works where the contractor has to bring the same at his own

(A) Name of Manufacturer of Cement

1. Narmada Cement Company Ltd.

2. Saurashtra Cement & Chemicals.

4. Shree Digvijaya Cement Co. Ltd.

5. Binani Cement

6. Vikram Cement

7. HI Bond Cement

8. A.C.C. Cement

9. M/s Sanghi Industries Ltd., Kutch

10. Birla Corporation Ltd., Ahmedabad

11. Laxmi Cement

12. Ambuja Cement Co. Ltd.

13. Siddhi Cement

14. L&T (Ultra tech ) Cement

15. Jay Pee Cement.

16. Trinetra Cement Ltd., Ahmedabad

17. Wonder Cement

18. Tata Chemicals Ltd. Ahmedabd

19. Vadraj Cement Ltd.Ahmedabad

(B) Names of Manufacturer / Supplier of structural Steel / Coils / Bars etc. for

the structural / Pipes / reinforcement etc.

1. Steel Authority of India

2. Tata Iron & Steel Co. Ltd.

4. M/s. Nilkanth Concast PVT. Ltd.

5. Electrothern

6. M/s. Hans Inspat Ltd.(Barnala TMT)

7. Kamdhenu TMT Sariya

8. ASR Multi Metals Pvt. Ltd.

10. National TMT

11. RINL, VAZAG

12. Vishal ISPAT, Vapi(Sarv Shakti TNT Bar)

13. Ashiana Rolling Mills,(Friend steel TMT bar)

14. Gujarat NRE Cock Ltd., Kutch(NRE TMT Bar)

15. Utkarsh Bar PVT Ltd., Rajkot.(Utkarsh TMT Bar)

16. Shree Parmeshwar Steels Pvt.Ltd. Ahmedabad. (GOD TMT Bar)

17. SRJ Petty Steels Pvt.Ltd. Jalna Pune (Shree OM TMT/SRJ TMT/KAPILA

18. Vinayak TMT Bars Pvt.Ltd. Sampa Dehgam (Vinayak TMT Bar)

19. Mono Steel India Ltd. Gandhidham (Kutch) (MONO ISI TMT Bar)

20. Diamond TMT & Procon Pvt.Ltd. Bahvnagar (Diamond TMT 500 Bar)

21. Haq Steels Pvt.Ltd.Ahmedabad (GERMAN TMX FE 500 Bar)

22. M.D.Inducto Cast.Pvt.Ltd. Bhavnagar (Rudra TMX TMT Bar)

23. Bhagya Laxmi rolling mills Ltd.,Jalana (Pollad TMT)

24. H. k. Ispat Private Limited (KOTHI GOLD ISI TMT Bar)

25. M/s Steefo Steels LLP,Ahmedabad (Steefo Steels)

26. KB Ispat Pvt ltd,Bhavnagar (K B TMT)

27. Metarolls ispat Pvt Ltd,Jalana

28. M/s Rajuri Steels & TMT Bars Pvt Ltd.,Jalana (Rajuri Steel)

29. M/s Sai Bandhan Infinium Pvt Ltd., Bhavnagar (BANDHAN TMX)

30. Shri Khatu Shyam Alloy Pvt Ltd.,Silvassa (Khantu Thermax TMT)

31. M/s VMS TMT Pvt Ltd.,,Ahmedabad (Kamdhenu NXT & Kay 2 TMT

32. Brikson Multimetals LLP,S.K (BRISKON TMT Bars)

33. Anjar TMT steel Alloys Pvt Ltd., Jalana (WELSPUN Shield TMT Bars)

M/s Kalika Steel Alloys Pvt. Ltd., Jalna (KALIKA 500 TMT)

34. M/s. SRMB Srijan Pvt Ltd.,Kolkata (SRMB TMT)

35. M/s Shri Bajrang Power & Ispat Ltd., Raipur (GOEL TMT)

Structural Steel

1. Mahavir Rolling Mills (All size of M.S. Angles, Flats)

2. Electrotherm (India) ltd.A’bad (All size of M.S. Angles)

3. Ambika Alloys & steels India Ltd. Visnagar (M.S.Angles Size

4. Unique structure & Tower Ltd Raipur (M.S.Channel up to 125 x 65 mm,

M.S.angle 35x35 to 110x110mm)

5. Ambika iron & steel Re- Rolling Mills,Visnagar. (M.S.Angles 25x25x2 to

65x65x6mm,Flat size 20x5 to 100x12mm)

6. Mid India Power & steel Ltd.Gandhidham (M.S.Beam up to

150x150mm, M.S.Angles 65x65, M.S.Channel up to 125x65mm)

7. Goyal Energy & steel Pvt.Ltd.Raipur (M.S.Equal angle 40x40x4/5/6 to

8. Varsana Ispat Ltd. Gandhidham (M.S.Angle up to 65x65mm, ISMB up

(C) Instruction for Materials :

1. The contractor shall submit entry details of cement & steel along with challan

duly endorsed by Security Department to E.I.C. for record and verification with

each R.A. Bill.

(a) All the Cement (53 / 43 grade) should be as per relevant IS (latest revision)

(b) Steel with necessary Certificate

(c) All material shall be got tested in Govt. approved laboratory by contractors at

their cost and after acceptance only material will be allowed to be utilized.

SIGNATURE OF CONTRACTOR Addl. Chief Engineer (P),

(With Rubber Stamp & Date) DGVCL Corporate Office, Surat.