Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.3 LAccepted-Finance | ₹9.3 L | L1 | Accepted-Finance Accepted L-1 |
| 2 | L2₹10.3 LRejected-Finance NEAR DFO OFFICE VIDYA NAGAR MEHAM ROAD BHIWANI 127021 | BHIWANI | BHIWANI | HARYANA | 127021 | ₹10.3 L | L2 | Rejected-Finance Accepted L-1 |
| 3 | Rejected-Technical | - | - | Rejected-Technical Not meet TQR |
| Sl No | Description | Qty | Unit | M/S HI Tech Elec co L1 | Chirag Construction company L2 |
|---|---|---|---|---|---|
| 1.00 | Providing & Installation of LED Glow Sign Board for Main entrance gate of 220 kV Substation Piran Kaliyar having dimensions of 22.5x4 sq ft as per below description:
i. Design, fabrication, supply and installation of LED glow sign board having high quality glow sign with MS angle support with Backlit LED modules with high visibility and uniform illumination, suitable for outdoor applications and long-lasting performance.
II. Providing & fixing of MS Poles to provide vertical support of 20 ft length, 4-inch diameter, heavy-duty grade including horizontal bracing/clips/fastners support for enhanced stability.
III. Excavation of pits for foundation of support poles and providing RCC grouting using cement, sand, and aggregate in proper ratio for pipe fixing, curing and surface finishing of grouted area.
IV. Proper alignment, leveling, and verticality check of the MS support pipes, fixing and mounting of the LED board on the support structure using MS clamps, fasteners, and welding (if required), use of Hydra crane or suitable lifting equipment to ensure safe and accurate erection of the board at the desired height.
V. Providing & fixing of waterproof cabling and wiring from the nearest power source to the sign board. | 1 | Nos. | 2,65,000 ₹2.6 L | 1,65,000 ₹1.6 L |
| 2.00Providing & Installation of various types of LED Glow Sign Boards given below as per follwing description : i. Design, fabrication, supply and installation of LED glow sign board having high quality glow sign with MS support with Backlit LED modules with high visibility and uniform illumination, suitable for outdoor applications and long-lasting performance. II. MS angles of 50x50x5 to provide vertical support at both ends to provide support, stability and sustain wind load. III. Grouting work of support angles including brick work, C.C. work and plaster, curing and surface finishing of grouted area. IV. Proper alignment, leveling, and verticality check of the support angles, fixing and mounting of the LED board on the support structure using MS clamps, fasteners, and welding (if required). V. Providing waterproof cabling and wiring from the nearest power source to the sign board. | |||||
| 2.10 | Glow sign board for 220 KV Substation's control room building having dimensions of 19.5x4 sq ft as per description. | 1 | Nos. | 1,80,000 ₹1.8 L | 1,60,000 ₹1.6 L |
| 2.20 | Glow sign board for 220kV O&M division office having dimensions of 18x4 sq ft as per description. | 1 | Nos. | 1,60,000 ₹1.6 L | 1,65,000 ₹1.6 L |
| 2.30 | Glow sign board for 220 kV Switchyard entry gate no.-1 having size of 8x4 sq ft as per description. | 1 | Nos. | 70,000 ₹70,000 | 1,70,000 ₹1.7 L |
| 3.00Providing and Installation of various types of Retro Reflective Vinyl Board on ACP Sheet with SS Frame and Support legs given below as per following description: i. Design, fabrication, supply and fixing of retro reflective board with support legs on high quality Aluminium composite sheet (ACP) having 3 mm thickness, exetrior grade and weather-proof properties and application of retro reflective vinyl film (high intensity grade) over the ACP with precision lamination for uniform finish. ii. The entire ACP sheet shall be enclosed within a custom-fabricated Stainless Steel (SS) frame with SS support structure using 304-grade SS square sections, duly polished and weather-resistant. iii. Excavation of pits for foundation of SS support legs and providing RCC grouting using cement, sand and aggregate in proper ratio for pipe fixing, curing and surface finishing of grouted area. iv.Ensuring accurate vertical alignment, centering, and leveling using laser or spirit level. | |||||
| 3.10 | Instruction board for 220 kV Substation switchyard entry gate no.-2 having dimensions 7.5x4 sq ft and total length of SS support structure should be approximately 8 feet including frame length. | 1 | Nos. | 45,000 ₹45,000 | 3,500 ₹3,500 |
| 3.20 | Transformer specification board having dimensions of 3x2 sqft and total length of SS support structure should be approximately 6 feet including frame length. | 4 | Nos. | 22,000 ₹88,000 | 35,000 ₹1.4 L |
| 3.30 | Station Transformer specification board having dimensions of 2x1.5 sqft and total length of SS support should be approximately 4 feet including frame length. | 1 | Nos. | 18,600 ₹18,600 | 27,500 ₹27,500 |
| 3.40 | AE office address board having dimensions of 4x2.5 sqft and total length of SS support should be approximately 6 feet including frame length. | 1 | Nos. | 23,000 ₹23,000 | 6,500 ₹6,500 |
Tender Value
Refer Docs
EMD Value
₹28,000
Closing Date
6 Feb 2026, 1:00 pmClosed
Superintending Engineer
SE, O and M Circle, PTCUL ,26-Civil Lines, Roorkee.
Design, Fabrication, Providing and Installation of Various types of Boards at 220 kV S/s Piran Kaliyar.
2026_PTCUX_90682_1
T-37/SE(OandM)CR/2025-26
Open Tender
Miscellaneous Works
60 days
Pirankaliyar, Roorkee
Please refer Tender documents.
3 documents required · 3 mandatory
₹590
Yes
SE O and M PTCUL Roorkee
₹28,000
Yes
5 Jun 2026
6 Jan 2026
7 Feb 2026
7 Jan 2026
6 Feb 2026
7 Jan 2026
Providing & Installation of LED Glow Sign Board for Main entrance gate of 220 kV Substation Piran Kaliyar having dimensions of 22.5x4 sq ft as per below description: i. Design, fabrication, supply and installation of LED glow sign board having high quality glow sign with MS angle support with Backlit LED modules with high visibility and uniform illumination, suitable for outdoor applications and long-lasting performance. II. Providing & fixing of MS Poles to provide vertical support of 20 ft length, 4-inch diameter, heavy-duty grade including horizontal bracing/clips/fastners support for enhanced stability. III. Excavation of pits for foundation of support poles and providing RCC grouting using cement, sand, and aggregate in proper ratio for pipe fixing, curing and surface finishing of grouted area. IV. Proper alignment, leveling, and verticality check of the MS support pipes, fixing and mounting of the LED board on the support structure using MS clamps, fasteners, and welding (if required), use of Hydra crane or suitable lifting equipment to ensure safe and accurate erection of the board at the desired height. V. Providing & fixing of waterproof cabling and wiring from the nearest power source to the sign board.
Providing & Installation of various types of LED Glow Sign Boards given below as per follwing description : i. Design, fabrication, supply and installation of LED glow sign board having high quality glow sign with MS support with Backlit LED modules with high visibility and uniform illumination, suitable for outdoor applications and long-lasting performance. II. MS angles of 50x50x5 to provide vertical support at both ends to provide support, stability and sustain wind load. III. Grouting work of support angles including brick work, C.C. work and plaster, curing and surface finishing of grouted area. IV. Proper alignment, leveling, and verticality check of the support angles, fixing and mounting of the LED board on the support structure using MS clamps, fasteners, and welding (if required). V. Providing waterproof cabling and wiring from the nearest power source to the sign board.
Glow sign board for 220 KV Substation's control room building having dimensions of 19.5x4 sq ft as per description.
Glow sign board for 220kV O&M division office having dimensions of 18x4 sq ft as per description.
Glow sign board for 220 kV Switchyard entry gate no.-1 having size of 8x4 sq ft as per description.
Providing and Installation of various types of Retro Reflective Vinyl Board on ACP Sheet with SS Frame and Support legs given below as per following description: i. Design, fabrication, supply and fixing of retro reflective board with support legs on high quality Aluminium composite sheet (ACP) having 3 mm thickness, exetrior grade and weather-proof properties and application of retro reflective vinyl film (high intensity grade) over the ACP with precision lamination for uniform finish. ii. The entire ACP sheet shall be enclosed within a custom-fabricated Stainless Steel (SS) frame with SS support structure using 304-grade SS square sections, duly polished and weather-resistant. iii. Excavation of pits for foundation of SS support legs and providing RCC grouting using cement, sand and aggregate in proper ratio for pipe fixing, curing and surface finishing of grouted area. iv.Ensuring accurate vertical alignment, centering, and leveling using laser or spirit level.
Instruction board for 220 kV Substation switchyard entry gate no.-2 having dimensions 7.5x4 sq ft and total length of SS support structure should be approximately 8 feet including frame length.
Transformer specification board having dimensions of 3x2 sqft and total length of SS support structure should be approximately 6 feet including frame length.
Station Transformer specification board having dimensions of 2x1.5 sqft and total length of SS support should be approximately 4 feet including frame length.
AE office address board having dimensions of 4x2.5 sqft and total length of SS support should be approximately 6 feet including frame length.
EE office address board having dimensions of 5x4 sqft, printed on both sides and total length of SS support should be approximately 9 feet including frame length.
Providing & fixing of Fire hut LED glow sign board having dimensions of 2x1.5 sqft equipped with all the necessary accessories i.e., LED bulb, wire etc.
Providing & fixing of updated SLD & Substation Layout on ACP sheet having dimensions of 5x4 sqft on existing frames including removing the old SLD & Layout, removal of rust by emery paper and painting of frame/support structure with desired color enamel paint.
Please Enable Macros to View BoQ information
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.03 MB
T37DOC.pdf
Tender Documents • 0.83 MB
BOQ_107455.xls
BOQ • 0.26 MB
Download all tender documents and submit your bid