SBM (G) Grant

Earth work excavation for structures as per drawings and technical specifications clause 305.1 including setting out, construction of shoring and bracing removal of stumps and other deleterious materials and disposal upto lead of 50mts, dressing of sides and bottom and back filling in trenches with excavated suitable material as per technical specifications 305 MORD/304 MORTH etc., complete.,

Gravel Filling in Basement including cost and conveyance of all materials and all labour charges including watering, ramming etc., complete., for levelling course.

Cement Concrete (1:4:8) mix using 40mm HBT Metal including cost and conveyance of all materials and all labour charges including watering, ramming etc., complete., for levelling course.

VRCC (1: 1 1/2:3) mix using 20 mm HBG M/C metal including cost and conveyance of all materials and labour charges including centering, curing, machine mixing, vibrating charges etc., complete., but excluding cost of steel and its fabrication charges etc., complete., Slab for 150mm thick over septic tank

VRCC (1: 1 1/2:3) mix using 20 mm HBG M/C metal including cost and conveyance of all materials and labour charges including centering, curing, machine mixing, vibrating charges etc., complete., but excluding cost of steel and its fabrication charges etc., complete.,For Roof slab for 150mm thick over partition walls

RR Masonry in CM (1:6) including cost and conveyance of all materials and all labour charges including watering, curing, mixing charges etc., complete., for foundation and basement

Brick Masonry in CM (1:6) prop with Flyash Cement solid blocks of size 290x225x140mm for manufaturing and flyash solid blocks using flyash of 80kgs of cement of 15 kgs Gypsum of 5 Kgs and stone dust including cost and conveyance of all materials and all labour charges seigniorage chages scaffolding and curing etc., complete with a compresive strength not lessthan 50kg/sqm for walls for super structure walls

Supplying, fitting and placing HYSD Fe 415 bar reinforcement complete as per drawings and technical specifications for bars below 36mm dia including over laps and wastage etc., complete.,

Plastering with CM (1:5) 20mm thick including cost and conveyance of all materials and all labour charges, watering, curing, mixing charges etc., complete., For Septic tank inside

Plastering with CM (1:5) 12mm thick including cost and conveyance of all materials and all labour charges, watering, curing, mixing charges etc., complete., for inside and out side

Supplying and Fixing Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with"P" or "S" trap: 630 mm Long as per BMW-D.02.

Painting with snowcem or other equal approved water proof cement paint one coats over priming coat including cost conveyance of all materials to work site and all operational, incidental, labour charges etc., complete.,

Providing and fixing factory made solid wood Polymer Composite(WPC) single extruded door frame section of size with encaplation of of 8mm rigid layer on all thesix surface . The door framewill have a rebet of 32mm . Door frame section of 63.5 x 100mm. The two vertical members are to be joined together with the horizental member using 8x75mm long MS Star full thread screws to be used with reverse farwarded speed control handrilling machine. The ready by assembled door frame is fixed to the wall using hold fast or bolt fasteners . A minimum of four member of screws to be provided for each vertical member and minimum two member for horizontal member etc. complete Item code no: BNT N 83.C

Providing and fixing 28 -30 mm thick solid Wood Polymer Composite(WPC) single extruded door shutter with 3 mm top and bottom rigid layer with an over all density of 750kg/Cum. It will be fixed to the frame using 3 inch /4 inch hinges. A minimum of 4 hinges will be required for fixing the door with the frame as per BMT-N.92

Supply and fixing of 20mm dia steel taps including cost conveyance of all materials, labour charges etc., complete.,

Supply and Delivery of CPVC 15.90mm dia SDR to 13.50 Pipes including cost conveyance of all materials , labour charges etc., complete.,

Supplying and fixing of 28.60 OD UPVC Elbows as per ISI Specifications

Supplying and fixing of 28.60 OD UPVC Tees as per ISI Specifications

Supplying and fixing of 28.60 OD UPVC Unions as per ISI Specifications

Supplying and fixing of 28.60 OD UPVC X- Nippals as per ISI Specifications

Supplying and fixing of 25mm dia GM Ball valve including cost and conveyance of all materials and all labour charges etc., complete of make Zoloto

Manufacture, Supply and Delivery of Unplasticised 110mm dia 6 Kgs/sqcms PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rdrevision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores any where in AP excluding all taxes etc., complete.,

Manufacture, Supply and Delivery of Unplasticised 90mm dia 6 Kgs/sqcms PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rdrevision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores any where in AP excluding all taxes etc., complete.,

Supplying and fixing of 110mm dia PVC Elbows as per ISI Specifications

Supplying and fixing of 90mm dia PVC Elbows as per ISI Specifications

Supplying and fixing of 90mm dia PVC Tees as per ISI Specifications

Providing and placing on Terrace (at all floor levels) polyethylene water storage tank of double layer Roto moulded confirming to IS:12701 approved brand and manufacture with suitable cover/ cap and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks as per BMW-G.01

Supply of 6 Sqmm WPSC (Weather Proof Single Core) ISI Alluminium Wire. Makes: Gold Medal / Million / GM / Vimal / Finecab / Nakoda / Plaza/ Payal / Sudhakar/ Rajnigandha/ Airson/Orbit/ollvin/Beljin

Supplying and fixing of 7 to 9 Wats LED Bulbs lamp with input voltage 90 to 300 V colour temperature 3000k - 6500k beam angle 170-220 degrees and B 22 Base as per ISI Specifications

Supplying and fixing of 6A, 1 way flush type swith as per ISI Specifications

Supplying and fixing of Pebdent holders as per ISI Specifications

Supplying and fixing of wooden switch board with hylam sheet of size 4"x4" as per ISI Specifications