PROVN OF BATHROOM, ADDITION/ ALTERATION TO TOILETS AND SPECIAL REPAIR TO HARD STANDING UNDER GE SHIKARGARH

Amount

Surface excavation n.exc 30 cm deep & averaging 15 cm deep getting out in Hard/dence soil as specified and directed

Excavation in trenches n.exc 1.5 m wide & n.exc 1.5 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 Sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and as directed.

M&L PCC (1:4:8) type D2 (40 mm graded aggregate) in foundation filling and mass concrete etc complete etc.all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar (1:6) complete all as specified and as directed.

M&L for Pre-cast cement concrete block 1:3:6 mix as in masonry with solid blocks, n.exc. 10 cm in width and setting in cement Mortar 1:4 complete all as specified and as directed.

M&L for Form work to sides and soffits of floor or roof RCC beam sides of lintel beam flat fair finish surfaces complete all as specified and as directed.

M&L for Formwork for chullah hoods, chajjas through and similar items including edges, surface fair finished complete all as specified and as directed.

M&L for Reinforcement 10mm dia and over TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L for Reinforcement 8 to 10mm dia TMT bars cut to length, bent to shape required and binding with MS wire not less than 0.9mm dia in stirrups complete all as specified and as directed.

M&L for providing RCC 1:1-1/2:3 type A1 (using 20mm graded stone aggregate) as in beams, lintel up to 1.5m clear span, lintel bands etc; complete all as specified and as directed.

M&L for Jodhpur stone roof slabs, self faced 7.5cm to 10cm thick, 25cm to 35cm wide, hoisted and set, jointed and grouted cement mortar 1:3 complete complete all as specified and as directed.

M&L for carrying out water proofing treatment for roofs in the following stages - (i) Rendering 10mm thick in 1:4 mixed with integral water proofing liquid all as per manufacturer's instructions over concrete surfaces finished even and smooth with out using extra cement. (ii) First coat of bitumen primer confirming to IS 3384 @0.300 Kg/ Sqm over plastered surafces (iii) Second layer of 3.0 mm thick APP modified polymeric membrane with centre core of Single non woven polyster reinforcement and having weight 3.60 Kg/ Sqm with mineral gravel finish on top complete laid with blown type bitumen grade 85/25 @ 1.20 Kg/ Sqm complete all as specified and as directed.

Supply only integral water proofing liquid ISI marked Make: Pidiproof LW or equivalent as approved by GE

Returning,filling in,including spreading,levelling,watering and well ramming in layers not exc 25 cm each layer in hard/dense soil all as specified and directed.

Removing excavated soil n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point all as specified and directed.

M&L for Jodhpur stone slab patti 40 to 50mm thick set in over and including 15mm thick cm 1:4 and jointed & pointed in neat cement slurry as in floors, plinth protection, steps etc; complete all as specified and directed.

M&L for keyed pointing in CM (1:3 ) to Jodhpur type regular coursed masonry complete all as specified and as directed.

M&L for 75 mm thick cement concrete 1:4:8 type D-2 using 40mm graded stone agg. as in sub base etc; finishing surfaces rough to receive the topping layer.

M&L for PCC 1:2:4 type B-0, 25 mm thick using 12.5mm graded stone aggregates as in sub floors/base floors under tiles as in levelling course etc all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for (such as copings, bands of any type, roof padding, kerbs, sunken etc; overall thickness and removing the dust debris etc to a distance not exc 250 meter from site and disposing the same complete all as specified and as directed by Engineer in charge.

Demolition of cement concrete (unreinforced) in ground floor not exceeding 15cm thickness below or above ground level including floor finishes and removing debris from the site all as specified and as directed.

Dismantling glazed tiles/ kota stone/ terrazzo tiles any type as in dado/ skirting etc; including cement mortar bedding ( but not backing ) complete all as specifide.

M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for non skid ceramic coloured tiles of approved shade and pattern, 7 to 8 mm thick , area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm laid in floor, set and jointe (square/ rectangular) in neat cement slurry and pointed in coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for glazed ceramic coloured tiles of approved shade and pattern of size 350x 250x7mm/ 450X350X7mm/ 300X450X7 to 8mm thick or any other nearer size as approved by Engineer incharge in vertical surface set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in CM 1:4 as in backing coat of tiles complete all as specified and as directed.

M&L for 16 -18mm thick granite (black colour) work (table rubbed and polished) in steps, shelves, jambs, pillars, window-cills, cooking platforms (vertical/ horizontal) and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed or bedding layer in CM 1:4 complete all as specified and as directed.

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in plinth protection, 50 mm thick, surfaces finished even and fair without using extra cement including provision of construction joints complete all as specified.

M&L for 100mm thick PCC 1:4:8 type D-2, (40mm graded stone aggregate) as in sub floor, sub bases, floor and paving etc; complete all as specified.

M&L for 80mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/ Sqcm, of shape and colour as approved by GE , laid over 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for factory made precast cement concrete solid blocks M-30 Grade, using 20 mm graded crushed stone aggregate as in kerb stones of any size (with plain or interlocking joints as directed) set in cement mortar 1:4 for path edgings etc; embedded in position including all necessary excavation, tamping ground arround blocks and removal of rubbish/ surplus soil etc., complete all as specified and directed by Engineer-in-Charge.

M&L for cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in kerbs or benching etc including necessary form work complete all as specified.

Demolition of stone/ brick work masonry, built in cement mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stone work, serviceable stone aside for reuse and removing unserviceable material in low laying area complete all as specified and as directed.

M&L for squared rubble walling jodhpur type, brought upto course,well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

-ditto- all as per above item but, except stone complete all as specified and as directed.

Extra over for hammer dressing to face stones with maximum depression on face from a straight edge not exc 20mm and dressing face beds and joints as specified to squared rubble walling,Jodhpur type, brought upto courses all as specified and as directed.

Taking down cement plaster, any description, on brick or stone walls etc, including raking out joints, hacking for key, scrubbing down with water etc and disposal of debris complete all as specified and as directed

M&L for rendering 15 mm thick in CM 1:6 over stone masonary, concrete surfaces, finished even and smooth (without using extra cement), all as specified and as directed.

M&L for 15 mm thick rendering on stone masonary wall surfaces in CM 1:4 finished fair and even all as specified and as directed.

M&L for 5mm thick rendering in CM 1:3 on ceiling surfaces finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for carrying out water proofing treatment for sunken portion in the following stages - (i) Taking down of existing sunken slab treatment from the sunken portion and cleaning the surfaces washing down with water and removing the rubbish of the pemises (ii) cleaning and filling cracks with sealing compound, brushing neat cement slurry @ 3.00kg/sqm and grouting (iii) 25mm thick cement concrete type B-0 (1:2:4) using 12.5mm graded stone aggregate on sunken slab portion and finishing the top surfaces even and smooth without using extra cement. (iv) M&L for two coat of acrylic cementitious water proofing coating (Dr FIXIT pidifin 2k manufactured by M/s Pidilite Industries Ltd or equivalent as approved by GE and followed by a overlay protective screed (10mm thick cement mortar (1:4) along with liquid water proofing compound approved make as per manufacturer's instructions) on top surfaces of sunken slab after preprations as mentioned above. Method of application for acrylic cementitious water proofing coating achieved as per manufacturers instruction complete all as specified and directed.

Dismantling cast iron work of any description and in any position complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 100mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 100mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, laid in trenches or in floor etc; complete all as specified.

S&F 75mm bore cast iron soil, waste and vent pipes (sand cast pipes) in any length with or without ears, fixed to walls etc; complete all as specified.

Fixing only in repair 75mm bore any type of soil, waste and vent pipes in any length with or without ears, fixed to walls etc; complete all as specified.

S&F 100mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 75mm bore pipe cast iron 'P' or 'S' trap, complete all as specified.

S&F 100mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 100mm bore pipe cast iron or any type cowls, complete all as specified.

S&F 75mm bore pipe cast iron cowls, complete all as specified.

Fixing only in repair 75mm bore pipe cast iron or any type cowls, complete all as specified.

M&L cast iron up to 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

Fixing only in repair any type or cast iron up 150mm bore fittings of Bends (any type, radious and angle) tapers any type, (straight, bend, increasing, decreasing or double socket etc.) Tee pieces, single branch, 'Y' junctions, double branch, cross (all sockets or socket and spigot) collars, caps and plugs etc; complete all as specified.

M&L 100mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

M&L 75mm bore cast iron pipes and fittings joints or connections are filled/ sealed properly by epoxy sealant of ISI mark or M-Seal (Make:- Dr Fixit) apply as per manufacturing instructions, complete all as specified.

S&F for 100mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

S&F for 75mm bore pipes stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall etc; complete all as specified.

M&L cement concrete type E-2, 1:5:10 (40mm graded crushed stone aggregate) as in sunken portion complete all as specified.

S&F 40mm bore steel water tubing medium grade galvanised inserted at the end of lateral slope projecting at least 15cm beyond the outer most projected part of the building below the drain pipe up to two storey construction as spout for sunken complete all as specifide.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but not exc 4.00 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each and removing from site or to store as directed by Engineer incharge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and removing from site or to store as directed by Engineer incharge.

Taking down shutters any description exc 1.00 sqm but not exc 2.00 Sqm each and refixing the shutter in same opening after easing and adjusting complete as directed by Engineer incharge.

Cutting holes in brick walls built in cement or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required depth of embedded portion of hold fast exceeding half brick but not exc one brick complete all as specified and as directed.

S&F Pressed steel framed made out of 1.25mm thick MS sheet, of size 105x60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc, complete all as specified and directed.

Cement concrete (1:3:6) type C-1 using 20 mm graded stone aggregate as in fillings and mass concrete, filling backs of chowkats etc., complete all as specified

Cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in lintels upto 1.50 m clear span, cills , steps, seismic and other similar bands, copings, kneelars, apex stones, bed plates, bed blocks of hold fasts etc including necessary form work complete all as specified

M&L for 40mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides face is covered with 1mm thick deco rative face veneer with lipping/frame to match complete all as specified

S&F of Factory made steel window box type using ERW hollow 'P' section comprising double frame for and including gauged and glazed Skeleton shutter jointed internally with flat iron 40x4mm complete including grill of 8/10mm square bars as directed by Engineer incharge, fixed horizontally @ 10cm c/c, hinges, handle, tower bolts, stops, lugs etc. (with provision of fixing for cooler if required) all as shown on drawing No CEJZ/TD/20 sheet 1/3 to 3/3 fixed in repairs i.e, incl taking down and removal of old steel windows from site or to store complete all as specified and directed. Note:- Guard bar/ grill shall be measured and paid separately under respective item of BOQ.

M&L for fabrication of louvered aluminum ventilators fabricated with anodized aluminum rectangular section weighing 0.55 Kg/m in frame & other section with deco grill of approved design & stainless steel wire cloth on the outer side of frame & trade pattern louvers with suitable mechanism for tilting /opening closing half portion & half bottom portion should be fixed with glass panes etc all as per sample kept in GE office & fixed in position complete all as specified and as directed. (Note : Glass pane & stainless steel wire cloth shall be measured & paid separately)

S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of appertuer 1.40 mm fixed fixed with tinned tacks or galvanized wire staples complete all as specified and as directed.

S&F Sheet glass ordinary quality 4 mm thick and glazing with oil putty or fixed with wooden beads or fixed with rubber gasket in squares any size of pane complete all as specified & as directed.

.-Ditto- all as per above item but 4mm thick frosted glass complete all as specified and directed.

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified & as directed.

Mild steel round bars welded to steel windows or ventilators as in guard bars framed or unframed complete all as specified & as directed by Engineer incharge. Note: Guard bars shall be factory welded & given one shop coat of red oxide or zinc chromate primer. Cost of factory welding & Shop coat of primer is deemed to be included in quoted rates.

S&F Factory made solid panel PVC door shutters 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawings. Make : Rajshree Doors or equivalent as approved by GE.

S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing. Make : Rajshree Doors or equivalent as approved by GE.

S & F 100 mm size PVC (as approved by Engineer incharge) butt hinges all as specified and directed.

Ditto- but stainless steel

S&F aluminium, anodised, barrel tower bolt of extruded section, 150mm long all as specified and as directed

S&F extruded aluminium alloy handles, 150mm long size, fabricated type, anodised all as specified and as directed.

S&F mild steel door handles, stove enameled black, 150 mm long and fixed with steel screws complete all as specified.

Mild steel barrel tower bolts, stove enameled black, with bright bolt, 150 mm long and fixed with steel screws complete all as specified.

300 mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12 mm dia with and including bolts and nuts complete all as specified.

S&F framed work as in doors chowkats of MS angle iron or MS hollow square/ rectangular any type/ size with gusset plates, rails, braces,cooler stand, chajja framed complete drilled for fixing of door etc; to be prepared for hanging with and including hold fasts and locking arrangements confirming to FE- 290 (Gde-E- 165) complete all as specified and directed by Engineer-in-charge.

Taking down 15mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

Taking down 20mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

Taking down 25mm bore steel water tubing and connections etc, including cleaning for refixing or removal from site complete all as specifide.

S&F 15mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F 20mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F 25mm bore steel water tubing medium grade galvanised with all fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 15mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 20mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

Fixing only 25mm bore steel water tubing any grade with new fittings and fixed complete to walls and ceiling or laid in floor etc complete all as specifide.

S&F Vitreous china squatting pan, Orissa pattern, size 580x440mm white/ coloured with integral foot rests including flush pipe and connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete all as specified.

Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet with 1.00 to 1.50m long tube (Make of Jet 'Prayag' Cat Part No 5211 or Equivalent) incl making connection to inlet flush pipe, & to 'P' or 'S' drain trap, incl supply of long special 'P' or 'S' trap fixed in repair complete and making good the disturbed portion etc. all as specified and directed.

S&F PVC 10 ltr. Cap. valveless syphonic action type, flushing cictern, low level, white/ coloured with inlet, ball valve, float and handle including brackets and connection to pipe etc. all as specified.

S&F in repair for Vitreous china urinal, half stall type, white,complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60cm long brass screws, pointing around urinal back in cement , suitable PVC waste pipe with brass unions, including making all connections to existing connections,complete all as specified and as directed.

S&F Vitreous china under/over counter wash basin, white colour, oval shape, size 560x470mm including CP waste fittings PVC waste pipe of suitable size/ bore and fixed over marble/granite or RCC plateform including necessery cutting accourding wash basin shape/ size etc; and making good disturbed surfaces to match with the existing complete all as specified. (Make: CERA Cat No. S2030104) or equivalent in Hindware/Parryware.

Low density polythene pipe (LDPE) of pressure rating 6 Kg per Sq.cm, 450 mm long, heavy duty with two sets of brass nuts & washers (one at each end) etc suitable for 15mm bore of pipe as in repair complete all as specified.

S&F 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed complete all as specified.

S&F 15mm bore angle stop valve of PTMT any colour high pressure screwed, for iron pipe complete all as specified.

S&F towel rail 450mm long of PTMT fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F shower rose with arm (195mm long with bend of 45 degree with flange) of PTMT any colour for fixing with 15mm pipe all as specified and as directed.

S&F Grating doom 100mm dia of PTMT all as specified and as directed.

S&F 500 litres capacity rotational moulded polyethylene water storage tanks triple layer (cylindrical vertical with closed top) in white colour hoisted and fixed in position all as specified in SSR Part-I, connecting up pipes including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 142 gms.) all as specified and as directed.

S&F Gun-metal, globe or gate valves, with iron wheel head/ handle screwed both ends for 25mm bore iron pipe and fixed all as specified and as directed.

Supply and fix for PVC (SWR) pipes, 100 mm bore, single socketed, in any length, with rubber ring joints, laid in trenhes or in floor all as specified and as directed.

Supply and fix for PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall all as specified and as directed.

Suppy and fix for PVC (SWR) bends, 110 mm bore all as specified and as directed.

Supply and fix for PVC (SWR) vent cowl of 110mm bore with complete all as specified and as directed.

Supply and fix for 75/100 mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for SWG gully trap 150 x 100mm all as specified and as directed (Make : ISI Marked)

M&L for 60mm thick factory made pre cast cement concrete rubber moulded laquer finish using chemical and admixure inter locking tiles having compressive strength not less than 350 kg/ Sqcm, of shape and colour as approved by GE , laid over 25mm thick compacted approved sand cushioned surface, joints filled by fine sand and compacting the top surfaces of paver blocks after laid etc of approved make all as specified and as directed.

M&L for bedding to drain pipes 150mm dia including packing under, and haunching in PCC 1:3:6 type C2 using 40 mm graded stone aggregate against the side of SWG after they are laid and tested all as specified and as directed.

M&L for 150 mm bore SWG drain pipe, of grade 'A' laid in trenches and jointed in CM 1:1, complete all as specified and directed, including testing etc complete all as specified and as directed.

M & L for PCC (1:3:6) type C2 using 40 mm graded stone aggregate as in surfaces channel and drain of man holes finishing surfaces even and smooth complete all as specified and as directed.

S & F 50mm thick Sand stone slabs in Manhole/ drain cover stones etc.n exc. 2m in length,punched dressed on face and along exposed edges, self faced on other side and set and pointed in cement mortar 1:4. complete

Cutting into existing manholes, for insertion of 150mm dia of pipe for connecting new drains making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 round section) in cement concrete 1:2:4 type B1, smooth finished and reforming benching all as directed and specified as directed.

Disconnecting existing PVC tank exc 500 Ltrs and not exc1000 Ltrs setting aside (or lowering if required) for repairs. Cleaning, etc and hoisting if required reconnecting refixing in position complete all as specified and directed.

S&F in repair 1000 ltr capacity rotational moulded polyethylene water storage triple layer (cylindrical vertical with closed top) in white colour, hoisted and fixed in position including 25mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe all as specified in SSR Part-I complete all as specified.

S&F in repair 15mm bore chromium plated bib taps, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified.

Supply and fixing in repair for Pillar tap/ Aria Chrome Single Concealed Stop Cocks with Basin Spout Kit, 15mm dia, brass chromium plated, fancy type screwed down, high pressure, with long shank, screwed shanks and fly nuts, screwed for iron pipes or for wash hand basin all as specified and as directed. (Make: Jaquar Cat No.ARI-CHR-39441K) or equivalent in Kohlar/Prayag as approved by GE

S&F in repair 15mm bore stop valve/ angle stop cock chromium plated, fancy type cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe with long shank and cup complete all as specified.

S&F in repair 25mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe complete all as specified.

S&F in repair Chromium plated shower roses 125mm size with or without swivel joints, any size, including fixing to steel pipe or union suitable for 15mm bore pipe etc; complete all as specified.

S&F in repair CP towel rail 450mm long fixed with and including CP brass screws and wooden/ plastic cleats complete all as specified.

S&F in repair CP grating doom 100mm dia complete all as specified.

Supply and fixing 25mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight for 25mm ball valves-455gms) fixed in repairs i.e., incl taking down and removal of old unserviceable float valves complete all as specified and as directed.

S&F in repair PVC SWR type 'B' socketed rain water pipes 110mm dia conforming to IS: 4985/ IS: 13592 complete all as specified and as directed.

S&F in repair PVC SWR bend/shoe of PVC 110mm dia suitable for 110 mm bore / dia PVC SWR rain water pipes complete all as specified and as directed.

M&L for carrying out treatment for RCC Chajja’s, Ceilling, facia etc; in the following stages :- (i) Dismantling and removing damaged core concrete by manually/ mechanically means in columns, beam, roof slab, chajja, lintels, etc complete including disposal of unserviceable debris. (ii) Diamond wire saw cutting making profile at edges and avoiding feather edges.(iii) Hydro-demolition cutting / cleaning with high-pressure water jetting (iv) Chipping of loose concrete from surface to expose sound concrete beneath using light chisel, hammer & also preparing concrete surface to receive further treatment, disposing the unserviceable debris (v) Sand blasting for cleaning of reinforcement and chipped surface of concrete so as to cause an intense abrading of the reinforcement and removal of rust from entire surface of reinforcement to achieve shining bright surface (vi) Cleaning reinforcement of total rust by tapping or using wire brush or any other suitable way including from behind and around the reinforcement bars to give it a totally rust free finished steel surface (vii) Providing and applying approved chemical rust remover with paint brush on corroded rebar and removing loose particles after 24 hours of its application and washed with sufficient quantity of water to make rebar free from corrosion (Dr. Fixit Rust Remover/equivalent), (viii)Surface preparation to remove all dust, dirt, loose rust scales etc., with wire brush, emery papers, rotary wire bristle brushes and grinding (if required) to the concrete surfaces to receive further repair treatment .(ix) Providing & fixing new reinforcement of various diameters as required at site in the form of mild steel and /or steel confirming to IS and lapping, welding, anchoring suitable to the old reinforcement including cutting, bending with all tools & tackles etc; (x) Providing and fixing GI weld mesh (1” x 1” x 12 gauge) with 30 cm lap at junction, one layer around the cross section of beams/ slab and along the span length. (xi) Providing and applying approved epoxy zinc rich anti-corrosive coating of 40 micron dry film thick/approved thickness of Dr. Fixit Zinc Rich Primer/ equivalent to the exposed reinforcing bars after application of rust remover, on the shear connectors/welded mesh/additional reinforcement of entire concrete repair surface. (xii) Dubbing out PMC 20mm thick (average thickness),(Polymer modified mortar/concrete) on uneven/ irregular surface such as walls / ceiling / chajjas etc. (using 12.5mm graded crushed stone aggregate) including 10mm thick PMM plaster in CM 1:3 ratio (Polymer modified mortar) on concrete surface (when concrete is green) ,(using Polymer modified 20% by weight of cement) complete all as specified and directed by Engr-in-charge.

Preparing new or previously untreated surfaces of steel or iron work of any description and girth over 10cm and applying two coats of synthetic enamel paint complete all as specified and as directed by Engineer incharge.

Preparing new plastered surfaces and M&L for applying concrete primer and /or cement base putty as required incl preparing the surfaces smooth by rubbing and / or sandpapering and M&L two coats of cement base paint on new plastered surfaces all as directed by Engr in charge.

Preparation of new plastered surfaces of walls etc. & applying three coats of lime white wash on walls complete all as specified.

Preparation of new plastered surfaces of ceiling etc. & applying three coats of lime white wash on ceiling complete all as specified.

Preparation of old decorated plastered surfaces of walls etc. & applying one coat of white wash complete all as specified.

Preparation of old decorated plastered surfaces of ceiling etc. & applying one coat of white wash on ceiling complete all as specified.

M&L for One light point controlled by one switch concealed point wiring complete with multistranded copper conductor 1.5 sqmm size PVC insulated FRLS unsheathed cable 1100 volt grade, conforming IS 694 & color code in conduit system of wIring, drawn in including medium grade PVC conduit suitable capacity dia concealed, including cutting chases, finishing by means of cement mortor making good to the surface of the wall & touching with the existing colour of wall with three coats and making good disturbed surface complete, sunk in pressed steel terminal boxes of required size not less than 1.6 mm thick factory made and factory painted with top cover 3 mm thick plastic laminated sheet fixed with brass screw and washer with all accessories including single core solid conductor copper 1.5 sqmm size solid PVC insulated unshethed cable as earth wire to common earth and connected to earth dolly drawn in same conduit complete all as specified. Make of wire: Finolex/Havells/Polycab (Make of Conduit : Finolex/Modi/Poly Cab)

Ditto as per item no 145but One 3 Pin 5 Amps socket outlet on same board

Ditto as per item no 145 but One 3 Pin 5 Amps socket outlet on independent board.

Ditto as per item no 145 but using 2.50 Sqmm wire and earth wire of 1.5 Sqmm PVC insulatd, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

Ditto as per item no 145 but using 4.00 Sqmm wire and earth wire of 2.5 Sqmm PVC insulatd, unsheathed cable for one 3 Pin socket outlet 15 Amps on independent board.

M&L for Sub main wiring with PVC insulated but unsheathed 2x6 sqmm single core multi stranded copper conductor cable passing through and in and incl PVC conduit concealing in wall (by means of chasing incl making good existing ) ISI marked and conduit accessries fixed on surface of wall, ceiling etc, making good the disturbed surface with and incl 1x4 sqmm single core copper conductor cable PVC insulated and unsheathed as earth wire. Note:- Two runs of 6 Sq.mm. and one run of 4 Sq.mm. cable including PVC conduit will be measured as one length. Make of wire: Finolex/Havells/Polycab (Make of Conduit : Finolex/Modi/Poly Cab

All as above item No 150 but using 2x4 Sqmm cable single core copper with 2.5 Sqmm copper conductor as earth lead.

All as above item No 150 but using 4x10 Sqmm cable single core copper with 2x6 Sqmm copper conductor as earth lead.Make of wire

Supply and fixing switch piano, flush type ,single pole one way 5/6 Amps 240 Volts.

S/F socket outlet 2 in 1, 5 Pin, and 5 Amp flush type universal.

S&F socket 2 in 1,5 Pin 5 and 15/16 Amp flush shuttered type ISI mark. Make: Cona/Anchor/Havells

S/F ceiling rose surface bakelite three terminal 65 x 50 mm three terminal 250/230 volts ISI marked

S&F switch piano flush type 15 Amps one way, 240 Volts.

Supply and fixing lamp holder PVC backlite with CFL-20W A/C 240 Volts

Supply and fixing single pole and neutral enclosure with a two pin and earth plug and socket complete with one single MCB SP 32 Amps. Make : Legrand/ABB/L&T

S&F wall mounted LED batten 20 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver ,230 V, having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Philips/Havells/Crompton

S&F connecting and commissioning of wall Light fixture 60 Watt LED,IP-66 protected ingle piece Die-cast aluminium housing and heat sink having heal resistive toughned glass at bottam, individual LED shall be having LM-80 complied as per L70 with 5700-6000K CCT. Optics shall be with proper distribution having lenses of either PMMA of polycarbonate material. Maximum power consumption shall be 60 Watt with min 6000 system lumens. 3stage CCCV driver with min, 4kv surge protection voltage range of 150-270V AC and DC out put operting voltage of driver should be complied to SELV norms not exceeding 72 DC only and including 40 mm light grade and MS clamp with nut & bolt all as specified as directed by Engineer-in-Charge.

S&F in replacement Square recess mounted LED slim down light with die cast aluminium housing finished in premium white powder coating 24 watt , 230 V including making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Crompton or equivalent in Phillips/Havells.

Supply and fixing, MCB/MCCB Distribution board (concealed flush to wall), , double door typein sheet metal enclosurewhenMCB to be used with 200 A rated copper bus bar confirming to relevant IS TPN 4 way complete all as specified.

Supply and fixing, MCB/MCCB Distribution board (concealed flush to wall), , double door typein sheet metal enclosurewhenMCB to be used with 200 A rated copper bus bar confirming to relevant IS SPN 8 way complete all as specified.

S&F in replacement wall mounted LED batten 05 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 V having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Philips/Havells/Cromption

S&F MCB SPN 6-32 Amps,240 Volts `C` Curve

S&F MCB SP 6-32 Amps,240 Volts `C` Curve

Supply and fixing in repair for Earthing complete with GI steel earth plate eletrode 60 cm X 60 cm X 6.0 mm thick barried directly in ground vertically to a depth not less than 2.25 metres below ground level with top edge of earth plate at a depth not less than 1.5 metres below level ground,connected to Gl iron or steel earth wire 4 mm dia (8 SWG) by means of nuts,bolts checks nuts and washers made of Gl iron or steel earth wire protected by Gl iron pipe 15 mm bore, medium grade and connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6:) type C1, pre-cast RCC coverslab 30 cm X30 cm X 10 cm with one lifting handle made of 8 mm dia ms bar funnel wire mesh,20mm bore GI or steel pipe medium grade for watering, charcoal or coke and salt in alternate larges,necessary excavation and earth work in any type of soil complete all as shownin electrical plate No 3 of MES schedule part-I and testing after completion.

Returning, filling excavated soil in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick each all as directed

Removing surplus excavated soil to a distance not exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting point.

M & L for sand cushioning to PVC cable with using clean dry and natural river sand gently punning below/around cable all as specified.

Supply and laying 40 to 50 mm thick roughly hammer dressed Jodhpur stone slab cover 25 cm to 30 cm wide and not less than 60 cm long dry laid aboutting each other with gap between adjacenet slabs not exceeding 10 mm for underground cable for protection.

Supply and laying in trenches/fixed on walls/poles of passing through pipe, PVC insulated armoured heavy duty LT U/G electric cable with aluminium conductor 1100 volts grade with suitable cable glands and lugs etc as required of following sizes . (a) 25 Sqmm x 4 Core

Supply and fix GI tubing light grade for protection of cable at wall/trench with fixing accessories as directed of 40 mm dia bore

S&F Heavy duty Exhaust fan 300 mm sweep, 900 RPM, including louvers with cutting chases on brick wall and grounting with nut bolts complete all as specified and directed by Engr-in-charge. (Make : Crompton Greaves Cat Part No : EXHD300 6-1/ Havells / Orient)

S&F of electric water heater, storage type, metal body, 35 litres capacity, BEE 5 star rated, fixed by using 4 Nos 75 mm long MS fasteners, nuts and washers and making all necessary electric connection complete all as specified and directed. Make : Havells / CG / Racold / V-Gaurd

S&F of medium grade concealed galvanised steel water tubing with all fittings fixed to wall or laid in floors for 15 mm bore, with and including for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc, complete all as directed. Make : Jindal / Prakash Surya / Tata

S&F of PVC connection 450 x 15mm dia PTMT (PVC), complete all as directed. Make : Prayag / polytuff

S&F of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed. Make : Prayag / Hindware / Parryware / Cera

S&F of angular stop cock 15 mm dia size with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Prayag / Hindware / Parryware / Cera

S&F of bib cock, 15 mm dia size with wall flange made of cast copper alloy, chromium plated fancy type, complete all as directed. Make : Prayag / Hindware / Parryware / Cera

Taking down carefully alluminium / copper point wiring complete for light, fan, socket or power point etc with fittings fixtures such as ceiling rose, holders, electric fittings, switchs, sockets, aluminium conductor cable with and incl wooden batten or FR PVC conduit and its accessories such as wooden gutties, rawl plugs, GI screws, aluminium clips, nails etc complete and removing the material from site and making good the disturbed surface of wall / floor/ ceiling etc as original i.e. brick work, plastering, white washing, OBD etc as required, complete all as specified and directed.

Taking down carefully UNSV main switch and DB's including MCBs of any size make, type and capacity and depositing at site as directed.

S&F in replacement wall mounted LED batten 10 watt, extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver, 230 V having efficacy of 100 lumen/watt including lamp holder and all accessories prewired including 1 No LED tube and making necessary electrical connection with 3 core copper conductor and testing complete all as specified and directed by Engr-in-charge. Make Philips/Havells/Cromption

Excavation in trenches not exceeding 1.5 m wide and not exeeding 1.5 m in depth and getting out in soft/loose soil for removing/laying of cable etc as directed by Engineer-In-Charge.

Diva Infra

SHRI BHIKSHU ART AND CONSTRUCTION CO

Bhagwati Construction Company

KRISHNA CONSTRUCTION COMPANY