Loading
Loading…
Loading…
Tender Value
₹5.6 L
EMD Value
₹11,221
Closing Date
1 Sept 2026, 6:00 pm4d left
EE (CIVIL)
BSNL CIVIL DIVISION KANNUR
Providing pre-coated GI sheet roofing to Prefab BTS and DG sets under Mattannur Division of BSNL Kannur BA.
2026_BSNL_287932_1
11/NIT/EE-KNR/2026-27
Open Tender
Civil Works
Item Rate
60 days
Various BTS site under MATTANNUR r Division
2 documents required · 2 mandatory
₹590
Accounts Officer (Cash), BSNL, Kannur.
₹11,221
18 Aug 2026
18 Aug 2026
3 Sept 2026
18 Aug 2026
1 Sept 2026
18 Aug 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. | |||||
| 1.1 | Hot finished welded type tubes | 1,300 | Kg | - | - |
| 2 | Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-Charge) of total coated thickness 0.47 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /seIf tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. | 260 | Sqm | - | - |
| 3Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : | |||||
| 3.1 | Ridges plain (500 - 600mm) | 45 | Mtr | - | - |
| 4Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : | |||||
| 4.1 | Two or more coats on new work | 125 | Sqm | - | - |
| 5Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : | |||||
| 5.1 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 1.5 | Cum | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.16 MB
NITDGRoofingMTR.pdf
Tender Documents • 0.90 MB
BOQ_335891.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at [email protected].